E61i Firmware 2.0633 performance issues

Hi,
I upgraded my E61i firmware from 1.0633 to 2.0633. While I don't see any major "upgrades" in the system software my "Menu" option has become incredibly slow!
It now takes around 7-10 seconds for the Menu items to load when I press the Menu key. Also if I open a folder in MENU such as Installat. or Office or Tools etc it takes around 7-10 seconds for these load as well! It's really irritating.
Anybody else with a similar problem or a fix?

Hi there!
For all of you who still have performance issues with this firmware, make sure you have completed the following steps:
PLEASE NOTE: DO NOT TRY my solution if you don't have the IT skills and you don't know what you are doing. I'm not responsable to any damage caused to your phone while going through these steps.
1. After the update was done, restore your data to the phone using PCSuite. The annoying "Installing" message will appear.
2. Try to kill the process using TaskManager (you cand acces the task manager by pressing the Reject button and then holding the menu button), or wait 'till it says that the installation was unsuccesfull.
3. After the "Installation" is "done", go to the Installat. folder in your menu and verify all your applications, like a user said above. If nothing happens when try to start the app, remove it using de = button or by Options - Remove.
4. After you removed all your bad apps, go to App Manager. You'll see a list of apps with names like "a0000bg4.sis" under which the text "Not Installed" is present. Write down the full names of all the apps with the "Not installed" text under them.
5. Connect the phone to your PC using the "Data transfer" option. Use windows Search, and search for each name you listed on the paper at step 4. For each name, delete de .sis file and the two folders named after it. Example:
Name of the "Not installed" application: a0000bg4.sis
Search for: a0000bg4
Delete: a0000bg4.sis, a0000bg4 folder, a0000bg4_anything_here folder
6. After you deleted all the files for the "Not installed" apps, disconnect the phone from the PC and restart the phone.
7. After the restart, the "Installing" message should have be gone and the phone's menu speed back to normal.
8. Reinstall all your applications from scratch (Thanks for this one Nokia!)
Please note: i`m not responsable for any trouble or damage caused by anyone who tries my solution above to their phones. it's just and advice and if you don't have the knowledge, DO NOT TRY IT.

Similar Messages

  • E61i - firmware 3.0633.69.00 - SD blocked !!

    Hi,
    I have a strange problem after updating the firmware to 3.0633.69.00 , one of the apps on the SD card doesn't install now with the latest firmware upgrade.
    So everytime I turn off my phone and turn it on, it will attempt to install the app(s) which has not installed previously.
    and every time I tried to restore my backup from SD(contacts,messages..etc) the phone show error message (phone will restart) !!!
    In the application manager there is a file called Launcher_MfE_150_PA.sisx stored in memory card and can't be installed manually.
    what should i do now to restore my contacts and using my phone!
    Thanks

    I backup my phone regularly, and I always keep at least the last two backup files inc case something goes wrong with one.
    As for the phone still on v2, it could be that the v3 is still being phased in around the world (models sold in different countries and regions are slightly different to account for things like languages, local services, legal issues etc. so it is not a single version of the firmware fo all models of the same type around the world.
    If your phone has operator-version software, then it could also be that your network has not yet approved the latest update. In this circimstance, Nokia would need your network's approval to release the update.

  • Where is E61i firmware 2.0633.65.01 for Code 05416...

    I have an E61i with Code = 0541667. Per the "Check you device - Software Update" page [1], 1.0633.86.02 is the current version.
    Any idea where 2.0633.65.01 is for the E61i with code 0541667?
    Paul Spencer
    [1] http://europe.nokia.com/A4577224

    Their is an updated version posted, 2.0633.65.51, but I have not seen any information from Nokia about this version.
    How is it different from 2.0633.65.01?

  • E61 firmware 3.0633.09.04 timezone issue?

    I have an e61 - when I updated to firmware 3.0633.09.04 I started having a new problem - all my outlook calendar appointments/meetings show up as 7 hours off on my phone.
    So for instance, I have a lunch meeting today at 11:30 and it shows up on my phone as 6:30pm.
    My phone is set to us/phoenix timezone, which is what it was set to before the firmware upgrade.
    This may be part of the problem - if I check the phone timezone setting it shows as "GMT 0:00 Phoenix, AZ" which isn't right - Phoenix is GMT-7:00.
    Has anyone else encountered this issue?

    I had to wait for a long time to get the update, because the update software always said, that there is no update available for my E60. Now I got it(3.0633.09.04) and i wish I could go back to the old firmware, as blachberry service is not working anymore. The only workarround I found is to use the BB software for a different provider. I have a vodafone SIM, but the BB software for vodafone doe´sn´t work with 3.0633.09.04, now I´m using a BB software for "other" provider and it works - at least I get my mails again, the calender is not able to be synchronised.

  • Performance issues with Imac intel 2011 27 inch..

    I have an 2011 imac 3,4 GHz Intel Core i7 with 16 GB 1333 MHz DDR3 RAM.
    Since a few months i noticed performance issues with FCPX, where before it would run through video it shows sometimes the color ball. Now the computer is slow in starting up and shutting down also. Ran disk utility but to no avail. I am now considering reinstalling mavericks.
    But I ran etrecheck.
    here are the results, please who can help me? I use this computer to edit and about everything else.
    copied:
    Problem description:
    slow start and slow quit of computer. Performance issues with fcpx and other programms.
    EtreCheck version: 2.1.8 (121)
    Report generated 6 maart 2015 21:49:31 CET
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        iMac (27-inch, Mid 2011) (Technical Specifications)
        iMac - model: iMac12,2
        1 3.4 GHz Intel Core i7 CPU: 4-core
        16 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1333 MHz ok
            BANK 0/DIMM1
                4 GB DDR3 1333 MHz ok
            BANK 1/DIMM1
                4 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        AMD Radeon HD 6970M - VRAM: 1024 MB
            iMac 2560 x 1440
    System Software: ℹ️
        OS X 10.9.4 (13E28) - Time since boot: 0:7:46
    Disk Information: ℹ️
        WDC WD1001FALS-403AA0 disk1 : (1 TB)
            EFI (disk1s1) <not mounted> : 210 MB
            MacintoshHD2  (disk1s2) /Volumes/MacintoshHD2  : 999.86 GB (152.18 GB free)
        APPLE SSD TS256C disk0 : (251 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            MacintoshHD (disk0s2) / : 250.14 GB (62.78 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
        HL-DT-STDVDRW  GA32N
    USB Information: ℹ️
        Apple Inc. FaceTime HD Camera (Built-in)
        Mitsumi Electric Hub in Apple Extended USB Keyboard
            Logitech USB-PS/2 Optical Mouse
            Mitsumi Electric Apple Extended USB Keyboard
        Western Digital Ext HDD 1021 2 TB
            EFI (disk2s1) <not mounted> : 210 MB
            datavideo (disk2s2) /Volumes/datavideo : 1.37 TB (133.89 GB free)
            prive (disk2s3) /Volumes/prive : 627.23 GB (68.13 GB free) - 7 errors
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
        Lexar  USB_3_0 Reader
        Seagate  Expansion Desk 3 TB
            EFI (disk3s1) <not mounted> : 315 MB
            downloads (disk3s2) /Volumes/downloads : 249.18 GB (138.35 GB free)
            BackUpBro (disk3s3) /Volumes/BackUpBro : 2.75 TB (1.03 TB free)
        Apple Internal Memory Card Reader
        Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
            G-Technology G-RAID with Thunderbolt
    Configuration files: ℹ️
        /etc/sysctl.conf - Exists
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Applications/Toast 11 Titanium/Spin Doctor.app
        [not loaded]    com.hzsystems.terminus.driver (4) [Click for support]
            /Library/Extensions
        [not loaded]    com.Avid.driver.AvidDX (5.9.1 - SDK 10.8) [Click for support]
        [not loaded]    com.blackmagic-design.desktopvideo.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
        [not loaded]    com.blackmagic-design.desktopvideo.iokit.framebufferdriver (10.1.4 - SDK 10.8) [Click for support]
        [not loaded]    com.blackmagic-design.desktopvideo.multibridge.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
        [not loaded]    com.blackmagic-design.driver.BlackmagicIO (10.1.4 - SDK 10.8) [Click for support]
            /Library/Extensions/DeckLink_Driver.kext/Contents/PlugIns
        [not loaded]    com.blackmagic-design.desktopvideo.firmware (10.1.4 - SDK 10.8) [Click for support]
            /System/Library/Extensions
        [not loaded]    at.obdev.nke.LittleSnitch (3876 - SDK 10.8) [Click for support]
        [not loaded]    com.SafeNet.driver.Sentinel (7.5.2) [Click for support]
        [not loaded]    com.paceap.kext.pacesupport.master (5.9.1 - SDK 10.6) [Click for support]
        [not loaded]    com.roxio.BluRaySupport (1.1.6) [Click for support]
            /System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
        [not loaded]    com.paceap.kext.pacesupport.leopard (5.9.1 - SDK 10.4) [Click for support]
        [not loaded]    com.paceap.kext.pacesupport.panther (5.9.1 - SDK 10.-1) [Click for support]
        [loaded]    com.paceap.kext.pacesupport.snowleopard (5.9.1 - SDK 10.6) [Click for support]
        [not loaded]    com.paceap.kext.pacesupport.tiger (5.9.1 - SDK 10.4) [Click for support]
            /Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
        [not loaded]    com.roxio.TDIXController (2.0) [Click for support]
    Startup Items: ℹ️
        Digidesign Mbox 2: Path: /Library/StartupItems/Digidesign Mbox 2
        DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
        Startup items are obsolete in OS X Yosemite
    Problem System Launch Agents: ℹ️
        [running]    com.paragon.NTFS.notify.plist [Click for support]
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.CS4ServiceManager.plist [Click for support]
        [loaded]    com.avid.ApplicationManager.plist [Click for support]
        [loaded]    com.avid.backgroundservicesmanager.plist [Click for support]
        [loaded]    com.avid.dmfsupportsvc.plist [Click for support]
        [loaded]    com.avid.interplay.dmfservice.plist [Click for support]
        [loaded]    com.avid.interplay.editortranscode.plist [Click for support]
        [loaded]    com.avid.transcodeserviceworker.plist [Click for support]
        [running]    com.blackmagic-design.DesktopVideoFirmwareUpdater.plist [Click for support]
        [failed]    com.brother.LOGINserver.plist [Click for support] [Click for details]
        [loaded]    com.paragon.updater.plist [Click for support]
        [failed]    com.teamviewer.teamviewer.plist [Click for support] [Click for details]
        [failed]    com.teamviewer.teamviewer_desktop.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [loaded]    com.adobe.versioncueCS4.plist [Click for support]
        [loaded]    com.avid.AMCUninstaller.plist [Click for support]
        [running]    com.avid.interplay.editorbroker.plist [Click for support]
        [running]    com.avid.interplay.editortranscodestatus.plist [Click for support]
        [loaded]    com.blackmagic-design.desktopvideo.XPCService.plist [Click for support]
        [running]    com.blackmagic-design.DesktopVideoHelper.plist [Click for support]
        [running]    com.blackmagic-design.streaming.BMDStreamingServer.plist [Click for support]
        [not loaded]    com.digidesign.fwfamily.helper.plist [Click for support]
        [running]    com.edb.launchd.postgresql-8.4.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.noiseindustries.FxFactory.FxPlug.plist [Click for support]
        [loaded]    com.noiseindustries.FxFactory.plist [Click for support]
        [running]    com.paceap.eden.licensed.plist [Click for support]
        [loaded]    com.teamviewer.Helper.plist [Click for support]
        [failed]    com.teamviewer.teamviewer_service.plist [Click for support]
        [loaded]    jp.co.canon.MasterInstaller.plist [Click for support]
        [loaded]    PACESupport.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    Programma Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Internet Plug-ins: ℹ️
        Default Browser: Version: 537 - SDK 10.9
        OfficeLiveBrowserPlugin: Version: 12.2.6 [Click for support]
        AdobePDFViewerNPAPI: Version: 11.0.0 - SDK 10.6 [Click for support]
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
        Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        iPhotoPhotocast: Version: 7.0 - SDK 10.8
        SharePointBrowserPlugin: Version: 14.0.0 [Click for support]
        AdobePDFViewer: Version: 11.0.0 - SDK 10.6 [Click for support]
        EPPEX Plugin: Version: 10.0 [Click for support]
        JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
    User internet Plug-ins: ℹ️
        Google Earth Web Plug-in: Version: 7.0 [Click for support]
    Audio Plug-ins: ℹ️
        DVCPROHDAudio: Version: 1.3.2
    3rd Party Preference Panes: ℹ️
        Blackmagic Desktop Video  [Click for support]
        DigidesignMbox2  [Click for support]
        Digidesign Mbox 2 Pro  [Click for support]
        Flash Player  [Click for support]
        Paragon NTFS for Mac ® OS X  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: OFF
        Auto backup: NO - Auto backup turned off
        Volumes being backed up:
            MacintoshHD: Disk size: 250.14 GB Disk used: 187.36 GB
            downloads: Disk size: 249.18 GB Disk used: 110.84 GB
        Destinations:
            G-RAID with Thunderbolt [Local]
            Total size: 8.00 TB
            Total number of backups: 6
            Oldest backup: 2014-04-08 14:24:41 +0000
            Last backup: 2014-09-24 21:58:28 +0000
            Size of backup disk: Excellent
                Backup size 8.00 TB > (Disk size 499.32 GB X 3)
    Top Processes by CPU: ℹ️
             2%    Google Chrome
             1%    WindowServer
             0%    opendirectoryd
             0%    mds
             0%    dpd
    Top Processes by Memory: ℹ️
        206 MB    mds_stores
        172 MB    com.apple.IconServicesAgent
        155 MB    Google Chrome
        137 MB    Dock
        113 MB    Google Chrome Helper
    Virtual Memory Information: ℹ️
        10.02 GB    Free RAM
        4.36 GB    Active RAM
        1.35 GB    Inactive RAM
        1.44 GB    Wired RAM
        1.24 GB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Mar 6, 2015, 09:37:26 PM    Self test - passed
        Mar 6, 2015, 08:15:56 PM    /Library/Logs/DiagnosticReports/Mail_2015-03-06-201556_[redacted].hang

    Problem description:
    disk problems
    EtreCheck version: 2.1.8 (121)
    Report generated 7 maart 2015 14:16:18 CET
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        iMac (27-inch, Mid 2011) (Technical Specifications)
        iMac - model: iMac12,2
        1 3.4 GHz Intel Core i7 CPU: 4-core
        16 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1333 MHz ok
            BANK 0/DIMM1
                4 GB DDR3 1333 MHz ok
            BANK 1/DIMM1
                4 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        AMD Radeon HD 6970M - VRAM: 1024 MB
            iMac 2560 x 1440
    System Software: ℹ️
        OS X 10.9.4 (13E28) - Time since boot: 0:19:51
    Disk Information: ℹ️
        WDC WD1001FALS-403AA0 disk1 : (1 TB)
            EFI (disk1s1) <not mounted> : 210 MB
            MacintoshHD2  (disk1s2) /Volumes/MacintoshHD2  : 999.86 GB (152.18 GB free)
        APPLE SSD TS256C disk0 : (251 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            MacintoshHD (disk0s2) / : 250.14 GB (62.97 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
        HL-DT-STDVDRW  GA32N 
        HGST HDS724040ALE640 disk2 : (4 TB)
            EFI (disk2s1) <not mounted> : 210 MB
            disk2s2 (disk2s2) <not mounted> : 4.00 TB
            Boot OS X (disk2s3) <not mounted> : 134 MB  - one error
        HGST HDS724040ALE640 disk3 : (4 TB)
            EFI (disk3s1) <not mounted> : 210 MB
            disk3s2 (disk3s2) <not mounted> : 4.00 TB
            Boot OS X (disk3s3) <not mounted> : 134 MB
    USB Information: ℹ️
        Mitsumi Electric Hub in Apple Extended USB Keyboard
            Logitech USB-PS/2 Optical Mouse
            Mitsumi Electric Apple Extended USB Keyboard
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. FaceTime HD Camera (Built-in)
        Lexar  USB_3_0 Reader 
        Seagate  Expansion Desk 3 TB
            EFI (disk5s1) <not mounted> : 315 MB
            downloads (disk5s2) /Volumes/downloads : 249.18 GB (138.35 GB free)
            BackUpBro (disk5s3) /Volumes/BackUpBro : 2.75 TB (1.03 TB free)
        Apple Computer, Inc. IR Receiver
        Apple Internal Memory Card Reader
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
            G-Technology G-RAID with Thunderbolt
    Configuration files: ℹ️
        /etc/sysctl.conf - Exists
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Applications/Toast 11 Titanium/Spin Doctor.app
        [not loaded]    com.hzsystems.terminus.driver (4) [Click for support]
            /Library/Extensions
        [not loaded]    com.Avid.driver.AvidDX (5.9.1 - SDK 10.8) [Click for support]
        [not loaded]    com.blackmagic-design.desktopvideo.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
        [not loaded]    com.blackmagic-design.desktopvideo.iokit.framebufferdriver (10.1.4 - SDK 10.8) [Click for support]
        [not loaded]    com.blackmagic-design.desktopvideo.multibridge.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
        [not loaded]    com.blackmagic-design.driver.BlackmagicIO (10.1.4 - SDK 10.8) [Click for support]
            /Library/Extensions/DeckLink_Driver.kext/Contents/PlugIns
        [not loaded]    com.blackmagic-design.desktopvideo.firmware (10.1.4 - SDK 10.8) [Click for support]
            /System/Library/Extensions
        [not loaded]    at.obdev.nke.LittleSnitch (3876 - SDK 10.8) [Click for support]
        [not loaded]    com.SafeNet.driver.Sentinel (7.5.2) [Click for support]
        [not loaded]    com.paceap.kext.pacesupport.master (5.9.1 - SDK 10.6) [Click for support]
        [not loaded]    com.roxio.BluRaySupport (1.1.6) [Click for support]
            /System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
        [not loaded]    com.paceap.kext.pacesupport.leopard (5.9.1 - SDK 10.4) [Click for support]
        [not loaded]    com.paceap.kext.pacesupport.panther (5.9.1 - SDK 10.-1) [Click for support]
        [loaded]    com.paceap.kext.pacesupport.snowleopard (5.9.1 - SDK 10.6) [Click for support]
        [not loaded]    com.paceap.kext.pacesupport.tiger (5.9.1 - SDK 10.4) [Click for support]
            /Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
        [not loaded]    com.roxio.TDIXController (2.0) [Click for support]
    Startup Items: ℹ️
        Digidesign Mbox 2: Path: /Library/StartupItems/Digidesign Mbox 2
        DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
        Startup items are obsolete in OS X Yosemite
    Problem System Launch Agents: ℹ️
        [running]    com.paragon.NTFS.notify.plist [Click for support]
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.CS4ServiceManager.plist [Click for support]
        [running]    com.avid.ApplicationManager.plist [Click for support]
        [running]    com.avid.backgroundservicesmanager.plist [Click for support]
        [loaded]    com.avid.dmfsupportsvc.plist [Click for support]
        [loaded]    com.avid.interplay.dmfservice.plist [Click for support]
        [loaded]    com.avid.interplay.editortranscode.plist [Click for support]
        [loaded]    com.avid.transcodeserviceworker.plist [Click for support]
        [running]    com.blackmagic-design.DesktopVideoFirmwareUpdater.plist [Click for support]
        [failed]    com.brother.LOGINserver.plist [Click for support] [Click for details]
        [loaded]    com.paragon.updater.plist [Click for support]
        [failed]    com.teamviewer.teamviewer.plist [Click for support] [Click for details]
        [failed]    com.teamviewer.teamviewer_desktop.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [loaded]    com.adobe.versioncueCS4.plist [Click for support]
        [loaded]    com.avid.AMCUninstaller.plist [Click for support]
        [running]    com.avid.interplay.editorbroker.plist [Click for support]
        [running]    com.avid.interplay.editortranscodestatus.plist [Click for support]
        [loaded]    com.blackmagic-design.desktopvideo.XPCService.plist [Click for support]
        [running]    com.blackmagic-design.DesktopVideoHelper.plist [Click for support]
        [running]    com.blackmagic-design.streaming.BMDStreamingServer.plist [Click for support]
        [not loaded]    com.digidesign.fwfamily.helper.plist [Click for support]
        [running]    com.edb.launchd.postgresql-8.4.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.noiseindustries.FxFactory.FxPlug.plist [Click for support]
        [loaded]    com.noiseindustries.FxFactory.plist [Click for support]
        [running]    com.paceap.eden.licensed.plist [Click for support]
        [loaded]    com.teamviewer.Helper.plist [Click for support]
        [failed]    com.teamviewer.teamviewer_service.plist [Click for support]
        [loaded]    jp.co.canon.MasterInstaller.plist [Click for support]
        [loaded]    PACESupport.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    Programma Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Internet Plug-ins: ℹ️
        Default Browser: Version: 537 - SDK 10.9
        OfficeLiveBrowserPlugin: Version: 12.2.6 [Click for support]
        AdobePDFViewerNPAPI: Version: 11.0.0 - SDK 10.6 [Click for support]
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
        Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        iPhotoPhotocast: Version: 7.0 - SDK 10.8
        SharePointBrowserPlugin: Version: 14.0.0 [Click for support]
        AdobePDFViewer: Version: 11.0.0 - SDK 10.6 [Click for support]
        EPPEX Plugin: Version: 10.0 [Click for support]
        JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
    User internet Plug-ins: ℹ️
        Google Earth Web Plug-in: Version: 7.0 [Click for support]
    Audio Plug-ins: ℹ️
        DVCPROHDAudio: Version: 1.3.2
    3rd Party Preference Panes: ℹ️
        Blackmagic Desktop Video  [Click for support]
        DigidesignMbox2  [Click for support]
        Digidesign Mbox 2 Pro  [Click for support]
        Flash Player  [Click for support]
        Paragon NTFS for Mac ® OS X  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: OFF
        Auto backup: NO - Auto backup turned off
        Volumes being backed up:
            MacintoshHD: Disk size: 250.14 GB Disk used: 187.17 GB
            downloads: Disk size: 249.18 GB Disk used: 110.83 GB
        Destinations:
            G-RAID with Thunderbolt [Local]
            Total size: 8.00 TB
            Total number of backups: 6
            Oldest backup: 2014-04-08 14:24:41 +0000
            Last backup: 2014-09-24 21:58:28 +0000
            Size of backup disk: Excellent
                Backup size 8.00 TB > (Disk size 499.32 GB X 3)
    Top Processes by CPU: ℹ️
             2%    WindowServer
             1%    fontd
             0%    firefox
             0%    AvidApplicationManager
             0%    AppleSpell
    Top Processes by Memory: ℹ️
        498 MB    firefox
        241 MB    mds_stores
        172 MB    com.apple.IconServicesAgent
        137 MB    Dock
        100 MB    java
    Virtual Memory Information: ℹ️
        12.33 GB    Free RAM
        2.39 GB    Active RAM
        1.11 GB    Inactive RAM
        1.34 GB    Wired RAM
        934 MB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Mar 7, 2015, 01:56:19 PM    Self test - passed
        Mar 6, 2015, 08:15:56 PM    /Library/Logs/DiagnosticReports/Mail_2015-03-06-201556_[redacted].hang

  • Experiencing strange performance issues after a hard drive failure - Help!

    I bought my mid-2012 i5 Macbook Pro in December of 2012. I realized when shopping for computers that I wanted an SSD installed, but that it would be a lot cheaper if I bought the SSD and installed it rather than customizing it in the Apple Store. So I bought a nice Samsung 128GB SSD (820 or 840 - can't remember which) and did the installation. I went ahead and installed two 4GB sticks of RAM while I was at it. Everything was just dandy: my boot time was just under 9 seconds, and all of my data-heavy apps booted in no-time at all. Then all **** broke loose.
    About two weeks ago, I opened my computer and I got the dreaded "? File Folder" notification with a gray screen. I immediately thought hard drive failure. No matter how many times I tried to boot, the computer just would not talk to the SSD anymore. I used Internet Recovery to get into my Disk Utility, and the entire partition was gone. I assumed the worst but wanted to be sure - I bought a hard drive enclosure and hooked the SSD up to an older Macbook, and lo and behold: it worked perfectly. I was not only able to recover data, but I could write data to the drive. Nothing appeared wrong with the drive when I plugged it into the old Macbook, but my newer Macbook still would not recognize it. Even my fiance's Windows 7 PC recognized the drive as "?" (since it was formatted for Mac, but hey - it recognized that it existed!).
    I decided to re-install the original HDD that came with the 2012 Macbook Pro (the one I removed in favor of the SSD). I was able to re-install the OS and I can boot up at will, but everything is different. The performance issues are extremely noticeable. I can't have more than two programs running at one time without the spinning wheel of death appearing. My boot time went from 9 seconds to 2 minutes. I know that SSDs increase performance, so there is some slight performance downgrade to be expected since I am using a mechanical drive now -- but these are not normal issues. Sometimes I can't even type a web address into Safari without the wheel appearing. iTunes, and specifically the App Store, take minutes to open - and I have no media is on iTunes.
    Here's the thing: I have tried just about anything to fix this problem that Google can pull up. I've verified the HDD, I've booted into Safe Mode, reset RAM and cache, run benchmarks and other performance tests, entered all sorts of weird language into Command Prompt, and studied Activity Monitor - I can't find a single red flag that would indicate anything being wrong. It appears to be a perfectly functioning, updated computer.
    I'm thinking a piece of hardware failed that triggered the error with the SSD. I'm not really sure though since all of my performance tests indicate perfectly functioning hardware. I'm a little afraid to take it to the Apple store because I know they'll tell me it's my fault for opening the computer and replacing the hard drive in the first place.
    Any ideas? At this point anything to salvage this computer would be helpful.

    Spin Cycle,
    were those other computers which were able to recognize your SSD in its external enclosure also Macs? Do you know if your SSD has its most recent firmware revision installed? (If it doesn’t, its installer can be downloaded from the Samsung SSD firmware page for burning onto a bootable DVD.) I haven’t used the 830 myself, so I don’t know what its reputation is with Macs. I have an 840 PRO in my MacBook Pro, which has been trouble-free for me, but my understanding is that the 840 EVO has had trouble with Macs in its earlier firmware revisions — so I’m wondering if the 830 has a known track record with Macs, good or bad.

  • E2500 performance issues

    I just moved to a new apartment and I've been having wireless performance issues. While using wireless I am getting 20-30 mbps less than the 50 mbps that I should be. The mbps is also very shotty and random. While hooked directly to the modem I get the 50 mbps that I should be getting. 
    Here is what I've tried to fix it so far: cycle the power, reset the router, update the firmware, turned of the 5.0 frequency, and checked for foreign MAC address that might be using my interenet. Any suggestions? 

    Are you experiencing this with both wired and wireless devices? If you are, then you need to update or reflash the router's firmware. Just make sure to reset the router after the update then reconfigure it. If you're only experiencing this with your wireless devices, then change the wireless channel on your router to avoid interference. Preferred channels to use are 1, 6, 9 and 11 since they're considered as non-overlapping channels. Make sure to use one channel at a time, so you can observe which channel will provide you a stable connectivity.

  • RV180W wired performance issue.

    We've recently setup a RV180W to replace an older router  and are experiencing performance issues with WIRED clients, WIRELESS  clients seem to have no problem.
    We've updated the firmware (1.0.1.9) and the problem still persists. We only have a VLAN setup, the default and are using the built-in DHCP.
    The  problems occur with WAN access, wired clients can take up to 1 minute  to load a web page while wireless clients get the page under 2 seconds.
    Is there a setting I missed?

    Hi Michael,the default setting of the router does not impact performance.
    Do all 4 ethernet ports show the same behavior? Have you swapped out wires? Are you using a wireless connection inconjunction with the wired connection?
    -Tom
    Please mark answered for helpful posts

  • E61i Firmware Update Available Again

    According to the www.celladdictblog.blogspot.com , the E61i firmware update is available again, anyone can confirm this? and if so any improvements? bugs?

    I don't think the story at the above link is news. I have just checked for an upgrade on my phone, Scandinavian region and the latest is the one I've had since about last November: 2.0633.65.01.
    There maybe updates for other regions, of course...
    Demanding user of intelligent phones

  • Report Performance Issue - Activity

    Hi gurus,
    I'm developing an Activity report using Transactional database (Online real time object).
    the purpose of the report is to list down all contacts related activities and activities NOT related to Contact by activity owner (user id).
    In order to fullfill that requirment I've created 2 report
    1) All Activities related to Contact -- Report A
    pull in Acitivity ID , Activity Type, Status, Contact ID
    2) All Activities not related to Contact UNION All Activities related to Contact (Base report) -- Report B
    to get the list of activities not related to contact i'm using Advanced filter based on result of another request which is I think is the part that slow down the query.
    <Activity ID not equal to any Activity ID in Report B>
    Anyone encountered performance issue due to the advanced filter in analytic before?
    any input is really appriciated
    Thanks in advanced,
    Fina

    Fina,
    Union is always the last option. If you can get all record in one report, do not use union.
    since all records, which you are targeting, are in the activity subject area, it is not nessecery to combine reports. add a column with the following logic
    if contact id is null (or = 'Unspecified') then owner name else contact name
    Hopefully, this is helping.

  • Report performance Issue in BI Answers

    Hi All,
    We have a performance issues with reports. Report is running more than 10 mins. we took query from the session log and ran it in database, at that time it took not more than 2 mins. We have verified proper indexes on the where clause columns.
    Could any once suggest to improve the performance in BI answers?
    Thanks in advance,

    I hope you dont have many case statements and complex calculations that you do in the Answers.
    Next thing you need to monitor is how many rows of data that you are trying to retrieve from the query. If the volume is huge then it takes time to do the formatting on the Answers as you are going to dump huge volumes of data. Database(like teradata) returns initially like 1-2000 records if you hit show all records then even db is gonna fair amount of time if you are dumping many records
    hope it helps
    thanks
    Prash

  • BW BCS cube(0bcs_vc10 ) Report huge performance issue

    Hi Masters,
    I am working out for a solution for BW report developed in 0bcs_vc10 virtual cube.
    Some of the querys is taking more 15 to 20 minutes to execute the report.
    This is huge performance issue. We are using BW 3.5, and report devloped in bex and published thru portal. Any one faced similar problem please advise how you tackle this issue. Please give the detail analysis approach how you resolved this issue.
    Current service pack we are using is
    SAP_BW 350 0016 SAPKW35016
    FINBASIS 300 0012 SAPK-30012INFINBASIS
    BI_CONT 353 0008 SAPKIBIFP8
    SEM-BW 400 0012 SAPKGS4012
    Best of Luck
    Chris
    BW BCS cube(0bcs_vc10 ) Report huge performance issue

    Ravi,
    I already did that, it is not helping me much for the performance. Reports are taking 15 t0 20 minutes. I wanted any body in this forum have the same issue how
    they resolved it.
    Regards,
    Chris

  • Interested by performance issue ?  Read this !  If you can explain, you're a master Jedi !

    This is the question we will try to answer...
    What si the bottle neck (hardware) of Adobe Premiere Pro CS6
    I used PPBM5 as a benchmark testing template.
    All the data and log as been collected using performance counter
    First of all, describe my computer...
    Operating System
    Microsoft Windows 8 Pro 64-bit
    CPU
    Intel Xeon E5 2687W @ 3.10GHz
    Sandy Bridge-EP/EX 32nm Technology
    RAM
    Corsair Dominator Platinum 64.0 GB DDR3
    Motherboard
    EVGA Corporation Classified SR-X
    Graphics
    PNY Nvidia Quadro 6000
    EVGA Nvidia GTX 680   // Yes, I created bench stats for both card
    Hard Drives
    16.0GB Romex RAMDISK (RAID)
    556GB LSI MegaRAID 9260-8i SATA3 6GB/s 5 disks with Fastpath Chip Installed (RAID 0)
    I have other RAID installed, but not relevant for the present post...
    PSU
    Cosair 1000 Watts
    After many days of tests, I wanna share my results with community and comment them.
    CPU Introduction
    I tested my cpu and pushed it at maximum speed to understand where is the limit, can I reach this limit and I've logged precisely all result in graph (See pictures 1).
    Intro : I tested my E5-XEON 2687W (8 Cores Hyperthread - 16 threads) to know if programs can use the maximum of it.  I used Prime 95 to get the result.  // I know this seem to be ordinary, but you will understand soon...
    The result : Yes, I can get 100% of my CPU with 1 program using 20 threads in parallel.  The CPU gives everything it can !
    Comment : I put 3 IO (cpu, disk, ram) on the graph of my computer during the test...
    (picture 1)
    Disk Introduction
    I tested my disk and pushed it at maximum speed to understand where is the limit and I've logged precisely all result in graph (See pictures 2).
    Intro : I tested my RAID 0 556GB (LSI MegaRAID 9260-8i SATA3 6GB/s 5 disks with Fastpath Chip Installed) to know if I can reach the maximum % disk usage (0% idle Time)
    The result : As you can see in picture 2, yes, I can get the max of my drive at ~ 1.2 Gb/sec read/write steady !
    Comment : I put 3 IO (cpu, disk, ram) on the graph of my computer during the test to see the impact of transfering many Go of data during ~10 sec...
    (picture 2)
    Now, I know my limits !  It's time to enter deeper in the subject !
    PPBM5 (H.264) Result
    I rendered the sequence (H.264) using Adobe Media Encoder.
    The result :
    My CPU is not used at 100%, the turn around 50%
    My Disk is totally idle !
    All the process usage are idle except process of (Adobe Media Encoder)
    The transfert rate seem to be a wave (up and down).  Probably caused by (Encrypt time....  write.... Encrypt time.... write...)  // It's ok, ~5Mb/sec during transfert rate !
    CPU Power management give 100% of clock to CPU during the encoding process (it's ok, the clock is stable during process).
    RAM, more than enough !  39 Go RAM free after the test !  // Excellent
    ~65 thread opened by Adobe Media Encoder (Good, thread is the sign that program try to using many cores !)
    GPU Load on card seem to be a wave also ! (up and down)  ~40% usage of GPU during the process of encoding.
    GPU Ram get 1.2Go of RAM (But with GTX 680, no problem and Quadro 6000 with 6 GB RAM, no problem !)
    Comment/Question : CPU is free (50%), disks are free (99%), GPU is free (60%), RAM is free (62%), my computer is not pushed at limit during the encoding process.  Why ????  Is there some time delay in the encoding process ?
    Other : Quadro 6000 & GTX 680 gives the same result !
    (picture 3)
    PPBM5 (Disk Test) Result (RAID LSI)
    I rendered the sequence (Disk Test) using Adobe Media Encoder on my RAID 0 LSI disk.
    The result :
    My CPU is not used at 100%
    My Disk wave and wave again, but far far from the limit !
    All the process usage are idle except process of (Adobe Media Encoder)
    The transfert rate wave and wave again (up and down).  Probably caused by (Buffering time....  write.... Buffering time.... write...)  // It's ok, ~375Mb/sec peak during transfert rate !  Easy !
    CPU Power management give 100% of clock to CPU during the encoding process (it's ok, the clock is stable during process).
    RAM, more than enough !  40.5 Go RAM free after the test !  // Excellent
    ~48 thread opened by Adobe Media Encoder (Good, thread is the sign that program try to using many cores !)
    GPU Load on card = 0 (This kind of encoding is GPU irrelevant)
    GPU Ram get 400Mb of RAM (No usage for encoding)
    Comment/Question : CPU is free (65%), disks are free (60%), GPU is free (100%), RAM is free (63%), my computer is not pushed at limit during the encoding process.  Why ????  Is there some time delay in the encoding process ?
    (picture 4)
    PPBM5 (Disk Test) Result (Direct in RAMDrive)
    I rendered the same sequence (Disk Test) using Adobe Media Encoder directly in my RamDrive
    Comment/Question : Look at the transfert rate under (picture 5).  It's exactly the same speed than with my RAID 0 LSI controller.  Impossible !  Look in the same picture the transfert rate I can reach with the ramdrive (> 3.0 Gb/sec steady) and I don't go under 30% of disk usage.  CPU is idle (70%), Disk is idle (100%), GPU is idle (100%) and RAM is free (63%).  // This kind of results let me REALLY confused.  It's smell bug and big problem with hardware and IO usage in CS6 !
    (picture 5)
    PPBM5 (MPEG-DVD) Result
    I rendered the sequence (MPEG-DVD) using Adobe Media Encoder.
    The result :
    My CPU is not used at 100%
    My Disk is totally idle !
    All the process usage are idle except process of (Adobe Media Encoder)
    The transfert rate wave and wave again (up and down).  Probably caused by (Encoding time....  write.... Encoding time.... write...)  // It's ok, ~2Mb/sec during transfert rate !  Real Joke !
    CPU Power management give 100% of clock to CPU during the encoding process (it's ok, the clock is stable during process).
    RAM, more than enough !  40 Go RAM free after the test !  // Excellent
    ~80 thread opened by Adobe Media Encoder (Lot of thread, but it's ok in multi-thread apps!)
    GPU Load on card = 100 (This use the maximum of my GPU)
    GPU Ram get 1Gb of RAM
    Comment/Question : CPU is free (70%), disks are free (98%), GPU is loaded (MAX), RAM is free (63%), my computer is pushed at limit during the encoding process for GPU only.  Now, for this kind of encoding, the speed limit is affected by the slower IO (Video Card GPU)
    Other : Quadro 6000 is slower than GTX 680 for this kind of encoding (~20 s slower than GTX).
    (picture 6)
    Encoding single clip FULL HD AVCHD to H.264 Result (Premiere Pro CS6)
    You can look the result in the picture.
    Comment/Question : CPU is free (55%), disks are free (99%), GPU is free (90%), RAM is free (65%), my computer is not pushed at limit during the encoding process.  Why ????   Adobe Premiere seem to have some bug with thread management.  My hardware is idle !  I understand AVCHD can be very difficult to decode, but where is the waste ?  My computer want, but the software not !
    (picture 7)
    Render composition using 3D Raytracer in After Effects CS6
    You can look the result in the picture.
    Comment : GPU seems to be the bottle neck when using After Effects.  CPU is free (99%), Disks are free (98%), Memory is free (60%) and it depend of the setting and type of project.
    Other : Quadro 6000 & GTX 680 gives the same result in time for rendering the composition.
    (picture 8)
    Conclusion
    There is nothing you can do (I thing) with CS6 to get better performance actually.  GTX 680 is the best (Consumer grade card) and the Quadro 6000 is the best (Profressional card).  Both of card give really similar result (I will probably return my GTX 680 since I not really get any better performance).  I not used Tesla card with my Quadro, but actually, both, Premiere Pro & After Effects doesn't use multi GPU.  I tried to used both card together (GTX & Quadro), but After Effects gives priority to the slower card (In this case, the GTX 680)
    Premiere Pro, I'm speechless !  Premiere Pro is not able to get max performance of my computer.  Not just 10% or 20%, but average 60%.  I'm a programmor, multi-threadling apps are difficult to manage and I can understand Adobe's programmor.  But actually, if anybody have comment about this post, tricks or any kind of solution, you can comment this post.  It's seem to be a bug...
    Thank you.

    Patrick,
    I can't explain everything, but let me give you some background as I understand it.
    The first issue is that CS6 has a far less efficient internal buffering or caching system than CS5/5.5. That is why the MPEG encoding in CS6 is roughly 2-3 times slower than the same test with CS5. There is some 'under-the-hood' processing going on that causes this significant performance loss.
    The second issue is that AME does not handle regular memory and inter-process memory very well. I have described this here: Latest News
    As to your test results, there are some other noteworthy things to mention. 3D Ray tracing in AE is not very good in using all CUDA cores. In fact it is lousy, it only uses very few cores and the threading is pretty bad and does not use the video card's capabilities effectively. Whether that is a driver issue with nVidia or an Adobe issue, I don't know, but whichever way you turn it, the end result is disappointing.
    The overhead AME carries in our tests is something we are looking into and the next test will only use direct export and no longer the AME queue, to avoid some of the problems you saw. That entails other problems for us, since we lose the capability to check encoding logs, but a solution is in the works.
    You see very low GPU usage during the H.264 test, since there are only very few accelerated parts in the timeline, in contrast to the MPEG2-DVD test, where there is rescaling going on and that is CUDA accelerated. The disk I/O test suffers from the problems mentioned above and is the reason that my own Disk I/O results are only 33 seconds with the current test, but when I extend the duration of that timeline to 3 hours, the direct export method gives me 22 seconds, although the amount of data to be written, 37,092 MB has increased threefold. An effective write speed of 1,686 MB/s.
    There are a number of performance issues with CS6 that Adobe is aware of, but whether they can be solved and in what time, I haven't the faintest idea.
    Just my $ 0.02

  • Performance Issue for BI system

    Hello,
    We are facing performance issues for BI System. Its a preproductive system and its performance is degrading badly everyday. I was checking system came to know program buffer hit ratio is increaasing everyday due to high Swaps. So asked to change the parameter abap/buffersize which was 300Mb to 500Mb. But still no major improvement is found in the system.
    There is 16GB Ram available and Server is HP-UX and with Netweaver2004s with Oracle 10.2.0.4.0 installed in it.
    The Main problem is while running a report or creating a query is taking way too long time.
    Kindly help me.

    Hello SIva,
    Thanks for your reply but i have checked ST02 and ST03 and also SM50 and its normal
    we are having 9 dialog processes, 3 Background , 2 Update and 1 spool.
    No one is using the system currently but in ST02 i can see the swaps are in red.
    Buffer                 HitRatio   % Alloc. KB  Freesp. KB   % Free Sp.   Dir. Size  FreeDirEnt   % Free Dir    Swaps    DB Accs
    Nametab (NTAB)                                                                                0
       Table definition     99,60     6.798                                                   20.000                                            29.532    153.221
       Field definition     99,82      31.562        784                 2,61           20.000      6.222          31,11          17.246     41.248
       Short NTAB           99,94     3.625      2.446                81,53          5.000        2.801          56,02             0            2.254
       Initial records      73,95        6.625        998                 16,63          5.000        690             13,80             40.069     49.528
                                                                                    0
    boldprogram                97,66     300.000     1.074                 0,38           75.000     67.177        89,57           219.665    725.703bold
    CUA                    99,75         3.000        875                   36,29          1.500      1.401          93,40            55.277      2.497
    Screen                 99,80         4.297      1.365                 33,35          2.000      1.811          90,55              119         3.214
    Calendar              100,00       488            361                  75,52            200         42              21,00               0            158
    OTR                   100,00         4.096      3.313                  100,00        2.000      2.000          100,00              0
                                                                                    0
    Tables                                                                                0
       Generic Key          99,17    29.297      1.450                  5,23           5.000        350             7,00             2.219      3.085.633
       Single record        99,43    10.000      1.907                  19,41           500         344            68,80              39          467.978
                                                                                    0
    Export/import          82,75     4.096         43                      1,30            2.000        662          33,10            137.208
    Exp./ Imp. SHM         89,83     4.096        438                    13,22         2.000      1.482          74,10               0    
    SAP Memory      Curr.Use %    CurUse[KB]    MaxUse[KB]    In Mem[KB]    OnDisk[KB]    SAPCurCach      HitRatio %
    Roll area               2,22                5.832               22.856             131.072     131.072                   IDs           96,61
    Page area              1,08              2.832                24.144               65.536    196.608              Statement     79,00
    Extended memory     22,90       958.464           1.929.216          4.186.112          0                                         0,00
    Heap memory                                    0                  0                    1.473.767          0                                         0,00
    Call Stati             HitRatio %     ABAP/4 Req      ABAP Fails     DBTotCalls         AvTime[ms]      DBRowsAff.
      Select single     88,59               63.073.369        5.817.659      4.322.263             0                         57.255.710
      Select               72,68               284.080.387          0               13.718.442             0                        32.199.124
      Insert                 0,00                  151.955             5.458             166.159               0                           323.725
      Update               0,00                    378.161           97.884           395.814               0                            486.880
      Delete                 0,00                    389.398          332.619          415.562              0                             244.495
    Edited by: Srikanth Sunkara on May 12, 2011 11:50 AM

  • RE: Case 59063: performance issues w/ C TLIB and Forte3M

    Hi James,
    Could you give me a call, I am at my desk.
    I had meetings all day and couldn't respond to your calls earlier.
    -----Original Message-----
    From: James Min [mailto:jminbrio.forte.com]
    Sent: Thursday, March 30, 2000 2:50 PM
    To: Sharma, Sandeep; Pyatetskiy, Alexander
    Cc: sophiaforte.com; kenlforte.com; Tenerelli, Mike
    Subject: Re: Case 59063: performance issues w/ C TLIB and Forte 3M
    Hello,
    I just want to reiterate that we are very committed to working on
    this issue, and that our goal is to find out the root of the problem. But
    first I'd like to narrow down the avenues by process of elimination.
    Open Cursor is something that is commonly used in today's RDBMS. I
    know that you must test your query in ISQL using some kind of execute
    immediate, but Sybase should be able to handle an open cursor. I was
    wondering if your Sybase expert commented on the fact that the server is
    not responding to commonly used command like 'open cursor'. According to
    our developer, we are merely following the API from Sybase, and open cursor
    is not something that particularly slows down a query for several minutes
    (except maybe the very first time). The logs show that Forte is waiting for
    a status from the DB server. Actually, using prepared statements and open
    cursor ends up being more efficient in the long run.
    Some questions:
    1) Have you tried to do a prepared statement with open cursor in your ISQL
    session? If so, did it have the same slowness?
    2) How big is the table you are querying? How many rows are there? How many
    are returned?
    3) When there is a hang in Forte, is there disk-spinning or CPU usage in
    the database server side? On the Forte side? Absolutely no activity at all?
    We actually have a Sybase set-up here, and if you wish, we could test out
    your database and Forte PEX here. Since your queries seems to be running
    off of only one table, this might be the best option, as we could look at
    everything here, in house. To do this:
    a) BCP out the data into a flat file. (character format to make it portable)
    b) we need a script to create the table and indexes.
    c) the Forte PEX file of the app to test this out.
    d) the SQL staement that you issue in ISQL for comparison.
    If the situation warrants, we can give a concrete example of
    possible errors/bugs to a developer. Dial-in is still an option, but to be
    able to look at the TOOL code, database setup, etc. without the limitations
    of dial-up may be faster and more efficient. Please let me know if you can
    provide this, as well as the answers to the above questions, or if you have
    any questions.
    Regards,
    At 08:05 AM 3/30/00 -0500, Sharma, Sandeep wrote:
    James, Ken:
    FYI, see attached response from our Sybase expert, Dani Sasmita. She has
    already tried what you suggested and results are enclosed.
    ++
    Sandeep
    -----Original Message-----
    From: SASMITA, DANIAR
    Sent: Wednesday, March 29, 2000 6:43 PM
    To: Pyatetskiy, Alexander
    Cc: Sharma, Sandeep; Tenerelli, Mike
    Subject: Re: FW: Case 59063: Select using LIKE has performance
    issues
    w/ CTLIB and Forte 3M
    We did that trick already.
    When it is hanging, I can see what is doing.
    It is doing OPEN CURSOR. But not clear the exact statement of the cursor
    it is trying to open.
    When we run the query directly to Sybase, not using Forte, it is clearly
    not opening any cursor.
    And running it directly to Sybase many times, the response is always
    consistently fast.
    It is just when the query runs from Forte to Sybase, it opens a cursor.
    But again, in the Forte code, Alex is not using any cursor.
    In trying to capture the query,we even tried to audit any statementcoming
    to Sybase. Same thing, just open cursor. No cursor declaration anywhere.==============================================
    James Min
    Technical Support Engineer - Forte Tools
    Sun Microsystems, Inc.
    1800 Harrison St., 17th Fl.
    Oakland, CA 94612
    james.minsun.com
    510.869.2056
    ==============================================
    Support Hotline: 510-451-5400
    CUSTOMERS open a NEW CASE with Technical Support:
    http://www.forte.com/support/case_entry.html
    CUSTOMERS view your cases and enter follow-up transactions:
    http://www.forte.com/support/view_calls.html

    Earthlink wrote:
    Contrary to my understanding, the <font face="courier">with_pipeline</font> procedure runs 6 time slower than the legacy <font face="courier">no_pipeline</font> procedure. Am I missing something? Well, we're missing a lot here.
    Like:
    - a database version
    - how did you test
    - what data do you have, how is it distributed, indexed
    and so on.
    If you want to find out what's going on then use a TRACE with wait events.
    All nessecary steps are explained in these threads:
    HOW TO: Post a SQL statement tuning request - template posting
    http://oracle-randolf.blogspot.com/2009/02/basic-sql-statement-performance.html
    Another nice one is RUNSTATS:
    http://asktom.oracle.com/pls/asktom/ASKTOM.download_file?p_file=6551378329289980701

Maybe you are looking for

  • Limited language support on N97

    I got my new N97 two days ago and I'm having great fun with it. The biggest PROBLEM I have (other than the short battery life problem) is that it does not support other languages. It's got huge memory and apps to view documents etc etc. Supposed to b

  • Unable to find/view garageband instrument sampler files

    Hello, My goal is to import my garageband drum kits into idrum. This would be easy except I can't locate the instrument sample files on my HD. I have looked in the directory Library/applicationsupport/garageband/sampler files (where I have been told

  • Problem with save file control

    hi , i have this vi to control a wavelength meter to measure & save reading to a file on my pc the problem is i need to make the write labview measurment file to be enabled by the Get Lambda swich and at the same time i need the AutoScan to be readin

  • Encore CS3 Is Stuck Importing As Timeline from Premiere CS3

    I just purchased CS3 as an upgrade from CS2 and Exported to Encore from Premiere CS3. I've gotten to the screen that says Importing at Timeline and have been at 49% progress for over 30 minutes. The .m2V, .m2v.xmpses, .wav, and .xmp files were all cr

  • Check username/password over mutliple environents

    we have a requirement to check that a username exists and matches on separate LIVE, TEST and DEV environments. Essentially we will create an APEX app for our helpdesk to see the usernames and click to check that a specific users account exists across