E61i (older smartphone) and using WIFI/WLAN

Greetings --
At home, I know people who have a WLAN network without password. I told the guy I got this smartphone and he said I could use his internet. So far so good, when im close to my window downstrairs, im able to read my mails and go on websites like facebook. No key is required.
However, At my second home, there are many secured WLAn networks around.
Heres where the problem comes in:
The smartphone only allows me to insert a WEP- password once. So I got it wrong, and now everytime I select that WLAN for a source to get on the internet, it doesnt ask me for a password. This is what happends: I choose the WIFI, it tells me "connecting" - then a message drops in that goes something like "No respond from gateway" im trying to translate it to english, but its the same thing though. It either gives me Times out or no responds. I don't think its the range. Its most likely around 70% strenght.
How do I allow myself to insert the correct key once again so I can get online?
I hope it makes a little sence. Any more intelligent people who can tell me what to do?

Fomindil wrote:
Isn't it because I gave the wrong key? Now it doesn't ask me the key anymore when I try to connect... it connects then gives me the "no reaction from gateway" error
In options I see the key as "****".
I assume its the one I tried, and its now stored, but I cant delete it so I can try again
The key is oke, because you are already connected, but the router has no internet connection (Gateway, Accesspoint.)
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Similar Messages

  • When you turn off cellular data and use wifi, do you still pay monthly?

    Hi

    If you use wifi, you are not using your cellular data, but your monthly plan would still be charged even if you don't use it.  That's why its a monthly plan rather than a prepaid contract, where you pay upfront, and when your balance runs out you stop getting service.
    In that case Using Wifi would keep you from using your prepaid balance.
    But again a Monthly contract is charged wether you use it or not for the specified amount of time. Usually for a Year sometimes more.

  • If I upgrade my iphone, can the older iphone still work like an ipod and use wifi?

    Thinking about going from a 4S to a 5S. Can I use my 4S like an iPod Touch on wifi without cellular data?

    Yes.

  • HT202879 Pages from iWork09 on older Mac and using new Pages doc. on it

    I have Pages [iWork09] on my MacPro [main machine] which is older and runs 10.7.5....I have Pages 5.1 on my MacBookPro which is running Mavericks - the problem arises because once I open a Pages doc. in my MBP it becomes a newer version and when I save it back to the MP, I can't open it =  I tried to download and install the new Pages on the MP and it won't because it requires ver. 10.9 - but I can't get that on my MP == so what do I do to work with documents worked on the MBP and yet saved to the MP?

    Pages v5+ document format is entirely different from previous versions and Pages ’09 v4.n cannot open it. Since Pages v5+ is missing about 100+ features from the previous v4.n, you have no assurance that content you create in the older version will survive intact into Pages v5+, or via roundtrip by Pages v5+ exporting to Pages ’09 document format.
    If you had iWork ’09 installed on the MBP before installing the Pages v5+ application, the iWork bits will remain unscathed in /Applications/iWork '09 folder. If true, I would standardize on Pages v4.n on both platforms for now. If you only have Pages v5+ on your MBP, then I would recommend 1) export to Pages ’09, for sort of compatibility with your iWork on the MacPro. Or, you could simply standardize on .doc between the two. Pages v5+ defaults to .docx on export, both this is selectable to .doc.
    Any Pages document that you double-click to open on Mavericks will be opened (and mangled) by Pages v5+. A right-click on the icon, then choosing Open With... Pages (4.3) would keep things sane.

  • Two people, two apple IDs, three iPods, two iPads, one Mac.  Can we use wifi sync?

    We have two apple IDs and multiple iOS 5 devices. We'd like to consolidate to a single Mac and use wifi sync with it. But can we run two instances of iTunes on one box at the same time and have that work?  Or do we need to consolidate to a single iTunes and single apple ID?  Or give up on both being able to do this, and just pick one to do it this way and make the other person keep using the old way?
    Thanks!

    We have two apple IDs and multiple iOS 5 devices. We'd like to consolidate to a single Mac and use wifi sync with it. But can we run two instances of iTunes on one box at the same time and have that work?  Or do we need to consolidate to a single iTunes and single apple ID?  Or give up on both being able to do this, and just pick one to do it this way and make the other person keep using the old way?
    Thanks!

  • Is it better to use Wifi or 4G while i'm at home?

    I always thought that using wifi would use up alot of my data. But from what i've been reading, when using wifi you don't use your data in your plan.. so if i have a 2GB plan, would this help save me from using so much of my data?  Btw.. right now i have unlimited data.. but i'm curious.  Thanks!

    brigetterad wrote:
    I always thought that using wifi would use up alot of my data. But from what i've been reading, when using wifi you don't use your data in your plan.. so if i have a 2GB plan, would this help save me from using so much of my data?  Btw.. right now i have unlimited data.. but i'm curious.  Thanks!
      Using wifi will allow your phone to use that rather than the Broadband connection, so your 3G/4G usage would go down the more you use wifi. There have been people that have looked at their usage, and turned on wifi whenever possible, and their usage went from numbers like 3GB to less than 500MB.
      If you wanted to see what your usage would be, start a new billing month, and use wifi as much as possible through the month and see what it is.

  • Ethernet doesn't work after using wifi

    I was given a second hand computer (macbook pro 17'', 2 years old) by my boyfriend. I formatted the HD and installed mountain lion. I used the network settings facility to create a new location to use the ethernet at my university and it all works fine, except that when I unplug the cable and use wifi for a bit, when I try to reconnect to the ethernet by plugging the cable back in it won't work (even when I turn wifi off). I used to do this with my old computer (macbook pro 15'', 3 years old) without any issues.
    I tried using the "Assist me" option in the network settings and I see that the first three checks (Ethernet, Network Settings and ISP) are green, but the last two (Internet and Server) are red. So my internet doesn't work. If I go through the "diagnostics" it asks me to restart the internet devices, which I don't have access to. I then restart my computer and it works perfectly.
    I don't want to have to restart my computer every time I plug the ethernet cable back in. I need to do this a few times in a day because the proxy of the university blocks some things, so I use my wifi for those (eg, updating the packages in R).
    Does anyone know what the problem is?

    Back up all data before making any changes.
    This step will erase all your settings in the Network preference pane. Make a note of them before you begin, and recreate them afterwards. It may be helpful to take screenshots of the preference pane.
    Triple-click the line below on this page to select it:
    /Library/Preferences/SystemConfiguration
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
    Reboot and test.

  • Drop in speed using WiFi. Does a powerline solve t...

    Upgraded to Infinity 2. Plug my laptop into the hub using the ethernet cable. Speed 55M.
    Remove the cable and use WiFi, speed drops to 35. Laptop 10 metres away from hub (although the result is the same if I take the laptop to within a foot of the hub)
    Done all the necessary to make sure it's on the best channel etc.
    Does the purchase and use of a pair of Powerline adaptors (ie plug the hub into the power socket using an ethernet cable and the laptop into another power plug..on the same circuit..using another cable) effectively mean that I should then get the 55M speed?
    Any advice will help. Keep it as non technical as possible, please.

    There are a couple of pages with information about wireless, and network connections, which have some sample diagrams.
    Wireless connection problems
    Network connection problems and possible solutions
    Powerline adapters normally work quite well.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • E6-00 and Belle update : Cannot use Wifi and LEAP ...

    Upgraded the E6-00 yesterday. First issues arise and even after a full reset, it still does not work.
    - Wifi connection using LEAP authentication
    Network is found, popup to enter username and password, all is good. Except the phone keep trying to connect while I type the password and each time, it re-ask the username. In short I cannot use connect at all as I don't have time to enter both username and password before it loop.... No more wifi connection possible as it use this LEAP authentication. Any way to increase the connection retry timeout ?
    - IMAP folder not found
    Same config as under Anna, but under Belle, it does not find any folder for IMAP account (and yes, the mail root folder is right), refreshing the folder list, just do nothing.
    - MAPS
    Say that it's empty and need maps. Give few options:
       * use OVI on the PC : OVI doesn't find MAP on the phone
       * use wifi to download map : .... if wifi would work, why not
    Anybody else got the same issue ? Or found solution ?
    L.\
    Solved!
    Go to Solution.

    Upgraded the E6-00 yesterday. First issues arise and even after a full reset, it still does not work.
    - Wifi connection using LEAP authentication
    Network is found, popup to enter username and password, all is good. Except the phone keep trying to connect while I type the password and each time, it re-ask the username. In short I cannot use connect at all as I don't have time to enter both username and password before it loop.... No more wifi connection possible as it use this LEAP authentication. Any way to increase the connection retry timeout ?
    Ok try to delete your apn, reset the device and resintall the OS. Don't restore any backup ans configure the WLAN apn: settings> connectivity> settings>destinations. Into the WLAN settings go to WI-fi security settings> in the fifrst field select EAP> in the second field EAP plugin settings > select EAP-LEAP.
    This way the apn will work again
    - IMAP folder not found
    Same config as under Anna, but under Belle, it does not find any folder for IMAP account (and yes, the mail root folder is right), refreshing the folder list, just do nothing.
    Please delete your mailboxes and configure them as you want. To create a IMAP access mailbox , for example Nokia Mail (outside of Messaging server) select Other. Put you credentials and choose Standard. You will see into Settings> your mailbox > sync content > Folder subscriptions> choose which folder to sync and it's done
    - MAPS
    Say that it's empty and need maps. Give few options:
       * use OVI on the PC : OVI doesn't find MAP on the phone
       * use wifi to download map : .... if wifi would work, why not
    Anybody else got the same issue ? Or found solution ?
    Please delete on mass memory the folder Cities and the file Qf, then open Maps and close the application. Verify that the folder Cities and the file Qf are again in E. Connect your device to Nokia Suite and redownload the cartography. 

  • Can't use WIFI and the battery consumption goes much faster

    I can't use WIFI after my iphone4s was updated to ios6.0  and the battery consumption goes much faster, how to solve ?

    This seems to be a problem relatet to the current versions of the app. After uninstalling Spotify I installed an older version, 2.8.0.1081, which worked perfectly with wifi. No newer versions seem to work so I hope there will be a fix soon. I've tried changing the UPnP as well as NAT filtering settings, but the newer versions of the app still wont work.

  • What is least expensive plan for smartphone and wifi hotspot?

    What is least expensive plan for smartphone and wifi hotspot?  I would probably want 1 -2GB or so of use for the hotspot, to allow access for my laptop when needed.  I don't need a lot of minutes, really my usage is 100 - 200 mins/month,  no or very little text, and some date use from phone, maybe 1 GB?
    Thanks for any ideas!
    FF

    phonelessFrank wrote:
    What is least expensive plan for smartphone and wifi hotspot?  I would probably want 1 -2GB or so of use for the hotspot, to allow access for my laptop when needed.  I don't need a lot of minutes, really my usage is 100 - 200 mins/month,  no or very little text, and some date use from phone, maybe 1 GB?
    Thanks for any ideas!
    FF
    Verizon Wireless is currently offering 3G Mobile Hotspot free on Palm devices that are still offered by Verizon Wireless. Depending on which device you have, and/or upgrade to here is an option that is lease expensive that would be suitable for your usage.
    Device: Palm® Pixi™ Plus
    Plan: Nationwide Talk 450 minutes $39.99/month
    Per-Minute Rate After Allowance $0.45
    20¢ per text or add packages starting at $5.00/month
     Data Package:
     $15.00/month (150MB with Mobile Email)
     $29.99/month (unlimited Email & Web)
    3G Mobile Hotspot: (5GB allowance)
    Free (promotion for Palm Pixi Plus)
    5GB monthly data allowance applies to all data transmitted (on handset and shared devices) while the Palm mobile hotspot application is active.

  • Have the following iMac at home and am contemplating adding a MacBook Air and a 2TB Airport Time Capsule for backup/storage and increased WiFi speeds.  My question is this (1) a compatible setup, and (2) will my older iMac slow down the WiFi speeds?   Man

    Have an older iMac and am contemplating adding a new MacBook Air and a 2TB Airport Time Capsule to increase WiFi speeds. My question is (a) is this a compatable setup and (b) will the older iMac slow the WiFi speeds?
    Thanks

    Be careful about mixing Time Machine backups and other data on the TC's disk.  That will cause conflicts, sooner or later.  See #Q3 in Using Time Machine with a Time Capsule for an explanation and some possible workarounds.

  • I have 2 macbooks each with an account for me and one for my wife. I use one Macbook logged in with my account and my wife uses the other Macbook only loged in on her account. We both make regular time-machine back-ups each on a separate external disk

    I have 2 Macbooks each with an account for me and one for my wife. I use one Macbook logged in with my account and my wife uses the other Macbook only logged in on her account. We both make regular time-machine back-ups each on a separate external disk. Is it possible to update her account on my macbook using her external disk without overwriting my stuff on the same Macbook and vice versa?

    Time Machine does not do individual accounts. It records the complete drive. So if you were to use her TM backup on your Mac it would make your Mac just like hers. Both yours and her account on your MAC.
    Just copy the missing files over from her Mac to yours. If there are differennt programs on each then they would need to be installed on both.

  • HT5622 I have been using one apple ID for my family as it makes it easier to manage itunes purchases/rentals on all of our devices.  Now that my kids are getting old and my wife has recently purchased an Iphone, I can see that I need to change my strategy

    I have been using one apple ID for my family as it makes it easier to manage itunes purchases/rentals on all of our devices.  Now that my kids are getting old and my wife has recently purchased an Iphone, I can see that I need to change my strategy. I plan to add a few more iphones to the family very soon.  What is your recommendation to manage all of our devices (iphones, itouch, apple tv) for my family?  Can I continue to function with one apple ID or is it time to take the leep into attempting to manage multi-apple ID's? 

    There's a few ways of managing multiple devices on a single computer (and keeping seperate content on each). The following document is worth checking through:
    How to use multiple iPods, iPads, or iPhones with one computer

  • Creative Cloud - restricting use of older versions and forcing use of latest versions - NO THANKS!

    I am a long-time customer of Adobe Products.  I have a unique roll as a Graphics management position, while also functioning as our company's IT administrator.  At home, for messing around, sure, creative cloud could be usable,  however, in my fairly demanding work environment, we encounter issues like OSX compatibility, occasionally needing to work from a PC, opening files from 2005, and relying on a specific workflows our business has built on foundations like Distiller PDF workflows etc.  When you force upgrades to newer versions, you dissuade us from being interested in the Creative Cloud platform.  It's really a shame, because small businesses like ours would benefit a lot from a neccesary "subscription"  so the newest adobe products are always available, where otherwise, convincing our company owner that a fairly pricey upgrade is neccesary because of a given set of features.  If the features aren't something the owner sees as a neccesity, there is really no reason for us to upgrade, so we drag things out.  For example, we are still on CS3 right now, and we will be making the jump to CS6 out of neccesity (CS3 will not allow us to edit old pagemaker files that have suddenly become our responsibility without crashing, where the CS6 trial handled it wonderfully).
    The creative cloud is a nice thought that would overcome a lot of 'upgrade' obsticles in the long-term for those of us in the small-business venture, but the version restrictions are too harsh.  In the accounting world there is a general rule that you can expunge data older than 7 years old, but if you get rid of that data before those 7 years are up you often find yourself in trouble.  Software is often the same way when you work with such a wide-array of tools as the adobe creative suite provides.  We essentially end up with what equates to a giant database of images, videos, and other files of misc origin and formats that we need a way to manage.  If we encounter problems (Much like I did recently where CS3 would not open the pagemaker files) and know we can count on another version of that same software (CS6, in this case) to open those same files, then why would you ever want to take those options away from a customer?  We will be paying the same fee regardless of what old versions we use, and while in the scenerio I give, the newer version of the software is the resolution to the problem, there is an equal liklihood of encountering a scenerio where the newer software wont allow me to open a file, but the older version will.
    I just don't understand, what's the harm?  You don't need to "support" those old versions, but they should ALWAYS be available for download and use on systems that can use them, ESPECIALLY in the style of environment you are offering where the old versions won't appeal to everyone, so it won't waste bandwidth or require a tremendous ammount of storage & serving on your part.
    What gives adobe?  I want Creative Cloud to succeed as much as you!  But I need it to work for me!

    Hi Fujilives,
    I copied this from the Creative Cloud FAQ
    Q:I am a Creative Cloud member using the CS6 applications included in my membership. Will I lose access to CS6 when CS7 becomes available in Creative Cloud? A: No, if you have downloaded and installed the CS6 versions of the applications, you will continue to have access to them without interruption as long as your membership remains active. When the CS7 versions become available, you will have up to a year to download and install them and they will run on your machine along with CS6 versions.
    So we are planning to give users access to and the ability to use the versions they started with even after new versions come out (you don't have to upgrade) but it wasn't possible to include access to older versions with the launch of this product (that I'm aware of). But I understand the need for some users to have access to older verisons based on your explanation. I'll pass along your feedback.
    -Dave

Maybe you are looking for