E61i's bad s/w!!

Don't know if Nokia ppl are taking a note of the messages being posted here. I live in India and i just recently bought an E61i. Since then, even though i kinda love this ph but i'm disappointed to see a real **bleep**py s/w loaded on this device! I dont know how can Nokia release such a product with a prototype-grade s/w. Yes, the s/w hadn't matured enough to be productized. The s/w version of my set may be little old. And the latest may be some 2.xx.xxx. I know i will be advised to upgrade the s/w if i talk to Nokia but the fact remains, ppl have already cribbed and verified (saw in some other threads) that latest s/w also is of no use! Then!! what is the way out??
There are too many problems in this ph. Actually way too many to describe and write them here. Overall, I'm very disappointed Nokia!
just listing couple of problems here
(1) UI refresh rate is too bad! moving from one screen to another screen, you can see screen is not updated smoothly!
(2) response is very slow!
(3) It took a whole evening for me to transfer my contacts from previous ph to this one and then update them properly the way i want. i faced some inconvenience here as the Contacts options didn't allow me to change the type of the ph number from mobile to teleph! i had go a round about way!
(4) after spending a whole evening on contacts, today morning i just installed and uninstalled BB. and i found while uninstalling BB, all my contacts are wiped out! Can you imagine???
NOKIA!! what's going on with you?? where are you getting this s/w from??

My problem with my Nokia E61i.
1. I am using SplashID to record my notes. Its terrible slow compare to my old palm treo 600. I read an url last night that 1 user said, he try splashid in SonyErricson and seems much faster than in Nokia. So must be something different in Nokia Symbian S60 compare to SE Symbian UIQ
2. If I surfing to website www.detik.com using 3G, after several time it will quit itself
3. Sometime it restart itself
I am using FW 2.0633.65.01
But because I use voip so much in e61i, I have to stick with it, maybe if iphone 3g launched, I'll change to it.
Hope Nokia improve their Symbian stability
thanks

Similar Messages

  • E61i vs BlackBerry 8707v

    Currently with Vodafone IRL and need to change to one of the above for business use (from a pretty good 6288). Can anyone comment either way, regarding the good or bad points of each. I am used to Nokia phones and menus etc etc and know that the Bluetooth connects fairly reliaby to connected devices, in this case the car 616. To me the BB 8707 is an unknown and is more expensive.
    Any comments appreciated as I am totally new to this type of email pushing device.
    My inclination is Nokia but welcome all comments.

    BB is a different machine which also takes a lot of time getting use to. If you feel comfertable with the nokia then i say go for the E61i. I was in the same boat when choosing between the BB 8800 and the E61i, I looked at both phones and there options and nokia was the right choice. Don get me wrong the BB 8800 was good but the options the E61i had over the BB example camera and so on. It didnt take that much convincing for me. I use the BB application that comes with the E61i and it does the job for me.
    They both have GPS navigation, but the BB downloads the maps for the country your are in for free, unlike the E61i you have to buy it. But thats not a major issue for me as i have a garmin GPS so its not a major issue for me.
    I did like the BB but i have never bought one reason being if i didnt like it, its not a phone that can be sold easy as most people prefer Nokia or Sony ericsson.
    They are both good machines, but at the end of the day buy the one that you feel is the right one for you, You will only know this by trying both in the shop, get them to start the machine for you, i am sure only then you will know which one you really want.
    Hope this helps you make your choice

  • E61i - unable to connect mobile to PC.

    Hi Folks,
    This is Munnag, i recently bought an E61i series, i have receveid a data cable and the supporting software CD along with the mobile piece, i installed the PC suite to my computer and connected my mobile through data cable. finally i was succeeded and able to tranfer things from PC to mobile form mobile to PC....
    one bad day or a bad time, i was looking after games and themes in the internet for my mobile, i found one game is really intrested and started installing it in to my mobile through my PC, mistakenly i cancelled the installation process then i tried to re-start it again,but it couldn't work. i tried with another application,but no sense, nothing is responding, then i disconnected the usb cable and again connected it. now my PC is not recognising the USB port at all...
    Some body please help me, is this the problem of mobile or the pc or the datacable ?
    do i need to format memory card or so ..??
    i use Windows XP.
    I tried several times, but there is no response. Some body plese help me....
    Thanks a ton in advance...
    Munnag Kumar
    Message Edited by kumar5 on 04-Jul-2008 11:13 PM
    Message Edited by zipper19 on 05-Jul-2008 12:10 AM

    Hey guys, Thank you so much for your help, i just recover from this issue, there was a problem with my data cable, i realised this after i used a card reader to connect my memory card to PC, today i went to showroom and asked for replacement, they give a new brand data cable to me..
    thanks a ton for all
    Regards,
    Munnag

  • E61i Firmware 2.0633 performance issues

    Hi,
    I upgraded my E61i firmware from 1.0633 to 2.0633. While I don't see any major "upgrades" in the system software my "Menu" option has become incredibly slow!
    It now takes around 7-10 seconds for the Menu items to load when I press the Menu key. Also if I open a folder in MENU such as Installat. or Office or Tools etc it takes around 7-10 seconds for these load as well! It's really irritating.
    Anybody else with a similar problem or a fix?

    Hi there!
    For all of you who still have performance issues with this firmware, make sure you have completed the following steps:
    PLEASE NOTE: DO NOT TRY my solution if you don't have the IT skills and you don't know what you are doing. I'm not responsable to any damage caused to your phone while going through these steps.
    1. After the update was done, restore your data to the phone using PCSuite. The annoying "Installing" message will appear.
    2. Try to kill the process using TaskManager (you cand acces the task manager by pressing the Reject button and then holding the menu button), or wait 'till it says that the installation was unsuccesfull.
    3. After the "Installation" is "done", go to the Installat. folder in your menu and verify all your applications, like a user said above. If nothing happens when try to start the app, remove it using de = button or by Options - Remove.
    4. After you removed all your bad apps, go to App Manager. You'll see a list of apps with names like "a0000bg4.sis" under which the text "Not Installed" is present. Write down the full names of all the apps with the "Not installed" text under them.
    5. Connect the phone to your PC using the "Data transfer" option. Use windows Search, and search for each name you listed on the paper at step 4. For each name, delete de .sis file and the two folders named after it. Example:
    Name of the "Not installed" application: a0000bg4.sis
    Search for: a0000bg4
    Delete: a0000bg4.sis, a0000bg4 folder, a0000bg4_anything_here folder
    6. After you deleted all the files for the "Not installed" apps, disconnect the phone from the PC and restart the phone.
    7. After the restart, the "Installing" message should have be gone and the phone's menu speed back to normal.
    8. Reinstall all your applications from scratch (Thanks for this one Nokia!)
    Please note: i`m not responsable for any trouble or damage caused by anyone who tries my solution above to their phones. it's just and advice and if you don't have the knowledge, DO NOT TRY IT.

  • E61i hanging up!

    dear friends,
    i am facing a typical problem with my new e61i. phone works fine all the time. but if i dont use it for around 6 hours (normally when i sleep!) two keys(contacts and own key) stops respoding. now if i turn it off and restart these keys start working. and this repeats every night, in the morning i have to re start the unit to get these keys working.
    also, the normal speaker on the unit (not the loud speaker) quality is very bad.
    any suggestions?
    regards
    bipin

    07-Jul-200712:42 PM
    scoobyman wrote:
    Hi bipinb
    Have you thought of backing up your phone data and resetting *#7370# in case anything has got corrupted?
    Agree! Should not occur, but could be some weird thing inside!

  • BADI for changing fields during Creation of BP in CRM

    Hello to everyone,
      I need to find a BADI (or other way) to default several fields during BP creation in CRM (4.0 SR1 SP9). The fields I will like to set are TAX TYPE, TAX NUMBER, TAX CATEGORY, etc.. I have found the BADI BUPA_TAX_UPDATE but i dont see any suitable parameters (structures) to changes these fields. Please advice and thanks in advance.

    Hi
    If you use function BUPA_NUMBERS_GET then your BP number will already be buffered and you can avoid a DB read. It may also be that the BP is not in the DB yet anyway.
    You can only pass one GUID in at a time - loop through IT_CHANGED_INSTANCES into a variable of type BU_PARTNER_GUID and pass that into the function as input parameter IV_PARTNER_GUID.
    Cheers
    Dom

  • Implementing BADI MD_ADD_COL_EZPS for MD04 custom column

    Hi there,
    I'm using BADI MD_ADD_COL_EZPS to display 3 new buttons and three new columns in MD04.
    For each line item that is displayed, the custom column is filled, after the button is hit -This works fine.
    My Question is:
    Is there any way to limit the value that is filled into the new column so that it only appears on the FIRST line item/row?
    (At the moment it is repeated all the way down the page - the new value is a material characteristic, so doesn't change, will always be the same for each line)
    I've looked at all the available structures/tables in the FILL_ADD_COLUMNS method of the BADI, and none seem suitable
    to determine the "first" row. (ie. something like the way SY-TABIX or SY-INDEX might be used)
    Any help appreciated.
    Thanks,
    David.

    Hi Shubhendu,
    in the method 'ACTIVATE_ADD_COLUMNS', you can set the flag EZ1_MODE to '1' to make the first column visible always. (it's been a while, but I think setting it to '2' makes it visible when the button is pressed.)
    Same applies to EZ2_MODE for second column, EZ3_MODE for third.
    look at the flags/parameters in this method, and also in FILL_ADD_COLUMNS, to fill the data.
    here you need to fill structure EMDEZX_USEX1 (for column 1) etc.
    The code is hit for each record displayed in MD04
    Hopefully this helps you.
    Regards,
    David

  • Help Needed Badly | BlackBerry INC000025111306 | BlackBerry PlayBook - Tablet button does not work, almost stuck, copper under screen, seventh repair

    I was really Humilitated my RIM on this Ticket whcih i rasied.
    1) I bought a new tablet in last november in 2 months i had a Charger issue 
    2) They said this charger issue we cannot replace with new tablet and gave me a refurbished Tablet to me .
    3) Which also had same charging issue and they exchanged 2 more tablets and the last tablet which was given to me by RIM have a safety concern
     - 1 Small mesh of wire is poping out from the Tablet 
     - Power Button is very hard and its not that easy to press,
    So i raised the above ticket and was esclated internally with RMA as well and i got an update from the esclation agents that we will reply back in 2 Days i waited almost 3 weeks and called 2 times in this 3 weeks for an Update asking for a new tablet so that atleast once in all i can jeep a good 1 Tablet.
    But they never bothered to call me and today i called them again and RIM gave me a call back mentioning we cannot give a new tablet we can again check this tablet repair it and give it back , If we cannot repir then give a replacement new/Old tablet,
    I was wondering how can a tablet from RIM can go out without such safety concern ? How a mesh of wire can comeout of tablet so what safety norms RIM is follwoing for customer.
    AM i not humilitated? since after taking all these struggle tto get a good tablet i have been considered as bad.
    What RIM have to say for this, I am planing to take this to Legal department to follow how i can get a justice for this.

    I would have deleted this but can't find a delete?
    At any rate. got the Blackberry going again but it reset it and lost all the info, pictures and so forth.. oh well. at least it is still working.
    Thanks.

  • Error message in a BADI getting displayed in a popup instead of status bar

    Hello All,
    I have implemented a BADI in ECC6 to prevent the change of formula in ERP from transaction O3I8.
    The BADI gets called on clicking 'Save' from transaction o3I8.
    Within the  BADI i am giving an error message using the following command:
    Message e000(ZABC) .
    However , the message gets displayed in a pop up instead of the status bar .
    The same is for information and warning messages.
    Any suggestions on how to display them in the status bar ?
    TIA
    Regards,
    Vartika

    Hi Brad,
    The checkbox to display messages in pop-up  is already switched off.
    Still themessages are getting displayed in pop-up.
    Regards,
    Vartika

  • Error message from a BAD PDF

    I am using Adobe Reader to render PDF documents as a part of a process and then convert it into TIFF. Some of the documents that come in are corrupt PDF documents and cannot render itself in the reader and hence cannot be converted. This is the error that the reader throws:
    ADobe reader could not open "test.PDF" because it is either not a supported file type or because the file has been damaged(for example, it was sent as an email attachment and wasn't correctly decoded)
    Now, the process is automated with no human intervention. with the advent of this error message, since there is a modal dialog box waiting for a response from the user, the process is interrupted and needs human intervention.
    My question is simply this. Is there an API i could use where i can figure out beforehand if the PDF is bad so i can reject such files early on? research shows that using the adobe forms server which has the PDF utility services, there is a query "Is a PDF document" that is available. I do not want to use a server product.
    Is there any other ADOBE product that exposes something similar?

    I guess i forgot to add that piece of information. WE do not create the PDFs. We receive PDFs from external sources over which we have absolutely no control  and that explains why we get such corrupt documents in the first place. I was just wondering if there was a simple API event/method/means attached to any ADOBE product which is compatible with .net that tells me if the PDF is corrupt UPFRONT.

  • Error while transporting infospoke with BADI in BW7.0

    Hi:
    We have an infospoke with Transformation ( ie with BADI) in BI7.0.
    While transporting to Quality box it gives error.
    "Transfer structure /BIC/CZZTXXXXX3 could not be generated
    Error when activating InfoSpoke ZTXXXXX3.
    Message no. RSOH010 "
    Could you please help in rectifying the error.
    PS: we tried transporting BADI first and then the infosoke but still its failing.
    Regards!
    Saniya

    Hi
    Check the forum link below
    Transport Problems with Spokes that have BADIs
    Thanks

  • E61i no longer connects successfully

    Hi,
    I'm having a very frustrating problem with my E61i, which has worked perfectly with Bluetooth File Exchange, Nokia Multimedia transfer etc., but now fails to connect. It seems something is corrupted on the phone such that this no longer works. Rebooting the phone / Mac achieves nothing. Here are the details:
    - From a clean start (after rebooting both systems), Bluetooth File Exchange successfully connects to the phone, but any attempt to transfer a file leads to a "connection failed or closed" error. It doesn't matter whether the file is on phone memory or the memory card.
    - thereafter, Bluetooth File Exchange is not even able to connect to the phone ... I get this same error message. On the phone screen I see parentheses appear for about a quarter second around the bluetooth symbol (indicating a connection), but then vanish. It is trying, but immediately fails.
    - via USB cable, Nokia Multimedia Transfer has a similar problem. After starting the "connect and transfer" from NMT, I then connect the USB cable from phone to Mac; the Data vs. PC Suite choice is offered to me by the phone; I choose PC Suite, briefly see the PC Suite connection symbol, which immediately vanishes. NMT works for a bit (i.e. NMT icon on the menu bar shows activity for a few seconds) then nothing further happens -- no iPhoto or iTunes launch as would normally be expected. Trying to connect via bluetooth gives the same behavior: a brief flash of the parentheses around the bluetooth symbol on the phone indicating a connection, which immediately vanishes, and NMT acts as if nothing happened (no connection).
    - iSync via bluetooth works just fine at transferring contacts and appointments back and forth between phone and mac.
    - USB data transfer to access files the memory card (E also works just fine. My understanding is that this is just a direct USB access to the memory card, effectively disconnecting the phone from the memory card.
    It looks like the functionality on the phone that supports file transfer to outside applications like PC Suite, Bluetooth File Exchange and Nokia Multimedia Transfer has corrupted some of its data files, so that it fails whenever it tries to start. I've searched quite a bit on the web, and lots of people have similar problems with Nokia file transfer, but no solutions that seem relevant.
    The problem is that the system is so damn opaque! If only I could see a log file like on linux I could presumably track down the meaning of the error messages and resolve the cause of the problem. But I haven't found any info that would indicate even where to start -- I can't even find out whether there are useful log files, let alone where to look for them.
    This problem started after transferring a 7 MB file from phone to Mac via Bluetooth File Exchange: during the transfer a GSM call came in (from a telemarketing idiot!); while I took the call, the transfer continued fine but a bit slower, and completed with no apparent problem. The transferred file seems fine. However, afterwards I'm having all these problems that I never had before.
    firmware 1.0633.86.02 14-03-07 RM-227 Nokia E61i-1
    MacBook Pro 1st generation, OS 10.4.11
    Help!
    -- Chris Lee

    I think I have solved my problem after a frustrating week. I traveled last week and changed time zones. I then changed the time zones on both my MacBook and E61i. However, once that was done, everytime I tried to synchronize my phone and iCal and Address Book, I kept getting a SYSTEM ERROR message, and the two would not sync.
    When I returned to home, and reset the times, I still got the System Error message, and no synchronization. Emailing the help desk here, they just told me to download the plug in! Not very "helpful" as I'd already done that!
    This morning then, I deleted all the calendar entries from my phone, and tried to sync again. Finally successes!
    Seems there's some kind of glitch if you change the time zone settings. Just delete all the entries on the phone, and then re-sync.

  • IPod can no longer sync or charge, bad pin connectors?

    I've got an iPod touch thats a year old now that suddenly no longer will charge/sync to anything. I'm thinking maybe the pins are bad?
    I've had difficulty inserting chargers into it since I got it, I've been careful to not handle it too roughly but it does take a strong push to get the charger in there. Of all the ipods I've had (and i had the first gen iPod touch before this too) over the years, never had that problem.
    Before I get a bunch of "just reset it" kinds of replies, it is functioning properly other then that. Last night I did have it hooked up and synced to my Mac so it fully charged, but just now I went to connect it and now it refuses to connect at all. I've tried 2 cords, and with the same cords I plugged my iPhone in as well and it all worked fine, so it's definitely not my other hardware. iPod software is also up to date as well.
    I haven't had a real issue of it not syncing with my computer before today, but in the past month it's had issues staying properly synced to my car radio (play it through USB). It would sometimes drop off or glitch up and not want to work correctly, though in the past week it started working more normally again.
    I listen to my ipod as much as humanly possibly, so I'm wondering if this something I can take to the Apple Store and see if its fixable or replaceable. I've been looking for a great excuse to get the new red ipod touch but I've been unemployed since August.. Of course it has to break before I get a new job
    Has anyone else had the issue of having difficulty getting the sync cords into their ipod touches/problems where the pins just die?
    EDIT: Nevermind. My imac suddenly wont sync my iphone either but I plugged the ipod into the iphone charger and it synced immediately. It's something on my computer's end.
    Message was edited by: Arei

    *all the songs are there, but there are shown in light grey and not able to be high lighted.*
    *I'm also not able to play from my ipod list, only from my itunes??*
    Grey text when you look at the content and a lock symbol at the bottom of the screen just indicates that the iPod is set to sync automatically with iTunes. If you want to play the iPod songs through iTunes, delete songs from the iPod, drag songs from iTunes, add playlists to the iPod etc. you need to change the update setting to "manually manage songs and videos" as per the link above. The text will change from grey to black and everything will be directly accessible through iTunes
    *I have seen a friend plug his ipod into some one elses computer and the same thing happened, it showed all the content but he was not able to access it, or modify it.*
    Again that's most likely because the iPod was set to auto-sync with his home library. If you want to connect and use an iPod on more than one computer or with more than one library you need to change the update preference in the iPod Summary tab to "Manually manage music and videos" and click Apply. The content of iTunes and the iPod are not syncronised in this mode so the two can be different. You can directly access the content of the iPod and play it through iTunes and you can drag and drop whatever you want to the iPod from either library:
    Using iPod with Multiple computers
    *Before I backed up my itunes libary from my external hard drive, and itunes was empty, it would not allow itunes to be copyied from my ipod?*
    iTunes will only give you the option to copy your iTunes Store purchases directly from an iPod to the computer, you'll find details in this article: Copying iTunes Store purchases from your iPod or iPhone to a computer
    For everything else (music from CDs, other downloads etc) there are third party utilities that you can use to retrieve the music files and playlists from your iPod.

  • IPod Touch 5.1.1 no longer sync'ing w/ iTunes 11.1.3(8). . . .Bad Battery ???

    Three day ago my iPod began acting up in a major way.  The battery charging symbol within the battery indicator is no longer showing the iPod being charged when plug in to my MacBook Pro 5.1 via one of my two USB ports.  A new Apple iPod cable was purchased thinking it was a bad wire or pin not making the proper contact with this device.  The same conditions are happening with this new cable.  I have several other peripheral devices and those devices are working and are connecting to my MBP's USB port without any issues.  I have noticed for the past six months my iPod Touch 3rd Gen has been showing signs in needing longer charging times and seems to drain quicker than it used too.  The iPod for the past two nights have been charging for more than eight-hours each night and is sporadic as if it deciding "I'm I fully or 30% charged?" Although subtle, It seems to jump within the sliding battery scale when the device is powered off for a while.  Sometime showing 80% charged when used for a few hours to 30% charged when used for ten minutes.  My iPod is now over three-years old and I think it is time for a new battery!
    But, in all honesty, not sync'ing with iTunes is it more than just have a new battery professionally installed? Or are there other electronical problems/components going bad with these devices?  What else can be wrong other than a new battery or will a new battery fix all what is mentioned above? Please be very honest and technical if needed, Thanks!

    Apple will exchange your iPod for a refurbished one with a new battery for $79. They do not fix yours.
    Apple - iPod Repair price                       
    A third-party place like the following will replace the bttery for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens         
    Replace the battery yourself if you are up to it. You can purchase a replacement battery for about $10
    iPod Touch Repair – iFixit                  

  • Reg. Exit/BADI for changing item data of PO in ME22N

    Hi all,
    My requirement is to update the field LABNR (Order Ack.) of few specific line items of a PO, in the Transaction ME22N, using Exit/BADI.
    I have tried the BADI  ME_PROCESS_PO_CUST. But the PROCESS_ITEM method of this BADI processes only the line item which has been changed/inserted in ME22N transaction. But my requirement is to update line items irrespective of whether that line item was "changed/not changed" during the process in ME22N screen.
    Could you please suggest me some suitable Exit/BADI for this requirement.
    Regards,
    Anbarasan K

    Thanks Martin.
    Problem solved by implementing the method Process_Header.
    1. Get the items from Header                              -  im_header->get_items
    2. Loop the item list and get the line item record   - re_item-item->get_data
    3. <- Logic to Update the line item - >.
    4. Update the line item                                       - re_item-item->set_data
    Thank you very much.. Martin.
    Regards,
    Anbarasan K

Maybe you are looking for