E61i - unable to connect mobile to PC.
Hi Folks,
This is Munnag, i recently bought an E61i series, i have receveid a data cable and the supporting software CD along with the mobile piece, i installed the PC suite to my computer and connected my mobile through data cable. finally i was succeeded and able to tranfer things from PC to mobile form mobile to PC....
one bad day or a bad time, i was looking after games and themes in the internet for my mobile, i found one game is really intrested and started installing it in to my mobile through my PC, mistakenly i cancelled the installation process then i tried to re-start it again,but it couldn't work. i tried with another application,but no sense, nothing is responding, then i disconnected the usb cable and again connected it. now my PC is not recognising the USB port at all...
Some body please help me, is this the problem of mobile or the pc or the datacable ?
do i need to format memory card or so ..??
i use Windows XP.
I tried several times, but there is no response. Some body plese help me....
Thanks a ton in advance...
Munnag Kumar
Message Edited by kumar5 on 04-Jul-2008 11:13 PM
Message Edited by zipper19 on 05-Jul-2008 12:10 AM
Hey guys, Thank you so much for your help, i just recover from this issue, there was a problem with my data cable, i realised this after i used a card reader to connect my memory card to PC, today i went to showroom and asked for replacement, they give a new brand data cable to me..
thanks a ton for all
Regards,
Munnag
Similar Messages
-
I had been on facebook in the morning of this date. I went back to my page and things began loading slowly. I logged out and tried to reload my account and from that moment on I keep getting the "Unable to connect
Firefox can't establish a connection to the server at www.facebook.com.
The site could be temporarily unavailable or too busy. Try again in a few
moments.
If you are unable to load any pages, check your computer's network
connection.
If your computer or network is protected by a firewall or proxy, make sure
that Firefox is permitted to access the Web."
I have gone through and tried everything in the trouble shooting section for Firefox.
My connection is fine, I have checked the modem, router, and checked in other browsers with the same results. I am unable to contact facebook to talk to their support team.
I am able to connect on my pc, to facebook, if I type in mobile before facebook.Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
See also:
*http://kb.mozillazine.org/Error_loading_websites
You can try to reset (power off/on) the router. -
I am unable to connect my mobile hotspot as wifi for ipad - Always dismiss
I am unable to connect my blackberry mobile hotspot as wifi for ipad but during connecting message comes as dismiss
What router are you using? make/model/version
What security type are you using? If it is WEP then symbolic (non hex) keys may be converted to hex in different ways by different operating systems. Is your laptop a Windows PC?
If you are using WEP then drop it and move to WPA2. WEP has been deprecated by the WiFi alliance since 2004 as insecure (it can be hacked in seconds). -
Since last week or 2 weeks ago, some of our users (both Batam and Singapore) here encountered a problem where they are not able to browse the Internet on their BB as they used to.
Example :
I did a test to browse on their BB
www.cnn.com
they will see below error:
“Unable to connect to the selected mobile data service, please try again later.
If the problem persists please contact your administrator “
However if we use ‘Google’ or ‘Yahoo’ search on the BB and entered ‘CNN’ and run a search on it.
We are able to open the CNN website – from the link result search by Yahoo or Google
It’s also applicable to other websites too.
Any idea?Hi thatemailguy,
Are the users on a BlackBerry Enterprise Server?
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
BO 4.0: Database error:Unable to connect to SAP BW server Incomplete logon
Hello Experts,
I have enabled a 'SSO to database' between SAP BW and Business objects by referencing to the documents related to below link.
http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtosetupSSOagainstSAPBWinSBOBI4.0forLDAPusers
I have created a universe connection with option 'use single sign on when refreshing reports at view time' and have created a universe on top of my BEx query by log-in to the universe designer tools using my LDAP account.
Now when I run the report with either SAP account or LDAP - I am able to run a adhoc webi report on this universe and get data either through the webi rich client or via BO 4.0 Info-view/Launch Pad.
But the issue is that when other users are trying to run webi queries on this universe either through Info-view/launch pad or rich client by log-in via LDAP Authentication - they get the below error: I have given SAP_ALL to this user for time being and also have done the necessary configuration for 'simple user format' in CMC so these user has 1 account with 3 alias definitions: Enterprise, SAP, R/3.
Database error: Unable to connect to SAP BW server Incomplete logon data -
If the user logs on into the BO 4.0 Info-view/launch pad or webi rich client using his SAP authentication than he is able to run and retrieve data.
I also get a dump in the SAP BW system - I analyzed the dump in SAP BW using st22 tcode and it gives the error short text as - Incomplete logon data and run-time error - CALL_FUNCTION_SIGNON_INCOMPL
Desired outcome:
I want the users to log-in to webi rich client or BO 4.0 Launch pad/Info-view using their 'LDAP' authentication and run reports against the universe on SAP BW/BEx query without any errors or additional username/password requirements.
Can someone please tell me if I am missing any steps/configuration and guide me to achieve the above mentioned desired result ?
Any help in this matter would be greatly appreciated.
Thanks & regards,
CD.Whether your problem is solved?
We have the same problem in BO Mobile.
Two users from one BW-role, BO-groups; one user report is executed, another user - error incomplete logon data. In Web Intelligence both users reports succeeds. -
TS1398 iPad unable to connect to Wi-Fi...while my other devices connect fine...any suggestions?
My iPad can no longer connect to Wi-Fi (anywhere)...at home, I get a message that says "Cannot scan for networks" -- and at my office...I get a message that says "Unable to join the network". Other mobile devices are connecting fine at both home and office. Any suggestions?
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Last November, my ASUS laptop forced me to update to Windows 8.1. Since then, I cannot connect to my organization's mobile EAS using the Mail/Calendar/People app. The Mail app says "We could not connect to .... because of problems with its
digital certificates. Contact your system administrator for info." I also tried to delete the account and recreate it. At the account info screen, it gave a related error message, stating "To connect to this account, you need a
valid certificate on the PC. Contact your system administrator for more info."
In trying to recreate the account, I note that the 8.1 Mail app appears to have combined all EAS connections -- I seem to recall different options for connecting previously, including one that was more specific to mobile EAS connections. My organization
only supports connection to mobile devices, and I continue to be able to connect via Windows phone, Android (iOS devices also supported).
I have done some digging and see that in my Windows Certificate Manager, there is a Personal Certificate with an error message. It's a "Token Signing Public Key" for "Client Authentication" using an RSA Public Key, but under the Certification
Path tab, the status states "The issuer of the certificate could not be found." I suspect this is the certificate that my organization's server is sending but is no longer being recognized by Windows 8.1.
My organization has been unwilling to support me on this. They point to the fact that all other devices work, my connection worked with Windows 8.0, and they don't have enough users that connect via Windows 8.1 laptops/tablets to troubleshoot on their
end. They also don't want to change setting that then cause other users to lose connectivity on the more commonly used mobile devices.
So, to trouble shoot myself, I have looked up posts on related issues and I have done all of the following to no avail:
- Make sure my Windows is up to date, including that latest Certificate/Credential update;
- Uninstalled the Mail/Calender/People App, restarted, and reinstalled it;
- Had MS Online support try to trouble shoot. They created a test account and tried to connect using that to no avail.
Notably, I have two Windows 8.1 machines -- my wife and I got matching ASUS laptops that both upgraded to 8.1 from 8.0 -- and I am unable to connect to my organization's mobile EAS using either machine.
To me, this is clearly a Windows 8.1 issue. The Mail/Calendar/People app should interface with mobile EAS exactly the same way that other mobile OSes do. Apparently this was the case with Windows 8.0, but no longer.
The last thing I'll add is that my organization requires password and remote wiping when connecting to the mobile EAS. But, this wasn't an issue when I had Windows 8.0 -- it connected fine and mandated password and remote wipe features.
NOTE: I originally posted this question on the Windows 8.1 Tehchnet forum and was told by an MS Engineer Soumya Sunda Debroy to repost in this forum.
PLEASE ADVISE. YOUR HELP IS APPRECIATED.
- DanPer the post above, I was pointed to Microsoft's remote connectivity analyzer and it appears to me that the GoDaddy Certificate -- which was compatible with Windows 8, is not compatible with Windows 8.1. (See results below.
I've also seen posts in other threads to "Ignore SSL errors" -- my Mail app doesn't present me that option, even though I uninstalled and reinstalled it. So, can anyone help?
Testing the SSL certificate to make sure it's valid.
The certificate passed all validation requirements.
Additional Details
Elapsed Time: 171 ms.
Test Steps
The Microsoft Connectivity Analyzer is attempting to obtain the SSL certificate from remote server damobile.sccgov.org on port 443.
The Microsoft Connectivity Analyzer successfully obtained the remote SSL certificate.
Additional Details
Remote Certificate Subject: CN=*.sccgov.org, OU=Domain Control Validated, Issuer: SERIALNUMBER=07969287, CN=Go Daddy Secure Certification Authority, OU=http://certificates.godaddy.com/repository, O="GoDaddy.com, Inc.", L=Scottsdale, S=Arizona,
C=US.
Elapsed Time: 84 ms.
Validating the certificate name.
The certificate name was validated successfully.
Additional Details
The host name that was found, damobile.sccgov.org, is a wildcard certificate match for common name *.sccgov.org.
Elapsed Time: 0 ms.
Validating certificate trust for Windows Mobile devices.
The certificate is trusted and all certificates are present in the chain.
Test Steps
The Microsoft Connectivity Analyzer is attempting to build certificate chains for certificate CN=*.sccgov.org, OU=Domain Control Validated.
One or more certificate chains were constructed successfully.
Additional Details
A total of 1 chains were built. The highest quality chain ends in root certificate OU=Go Daddy Class 2 Certification Authority, O="The Go Daddy Group, Inc.", C=US.
Elapsed Time: 30 ms.
Analyzing the certificate chains for compatibility problems with Windows Phone devices.
Potential compatibility problems were identified with some versions of Windows Phone.
<label for="testSelectWizard_ctl12_ctl06_ctl02_ctl02_ctl01_tmmArrow">Tell
me more about this issue and how to resolve it</label>
Additional Details
The certificate is only trusted on Windows Mobile 6.0 and later versions. Devices running Windows Mobile 5.0 and 5.0 with the Messaging and Security Feature Pack won't be able to sync. Root = OU=Go Daddy Class 2 Certification Authority, O="The Go
Daddy Group, Inc.", C=US.
Elapsed Time: 5 ms.
The Microsoft Connectivity Analyzer is analyzing intermediate certificates sent by the remote server.
All intermediate certificates are present and valid.
Additional Details
All intermediate certificates were present and valid.
Elapsed Time: 1 ms.
Testing the certificate date to confirm the certificate is valid.
Date validation passed. The certificate hasn't expired.
Additional Details
The certificate is valid. NotBefore = 8/7/2013 12:51:02 AM, NotAfter = 8/17/2016 4:07:52 PM
Elapsed Time: 0 ms.
Checking the IIS configuration for client certificate authentication.
Client certificate authentication wasn't detected.
Additional Details
Accept/Require Client Certificates isn't configured.
Elapsed Time: 149 ms. -
E71- unable to connect IMAP outgoing server
HI,
After I re-installed software in my E71 I have faced problem that I unable to connect IMAP outgoing server it was earlier fine Even Incoming mails are no problem currently.
please fix this issue
regards
nizar
MODERATOR'S NOTE:
We would like to inform you that we have edited your post and your personal details (e.g. full name, mobile number, email address) was removed as it is unwise to publish personal details on forums like this.
We kindly ask you not to share personal information on this forum.not enough to go on.
what country are you in?
what carrier do you use?
what do you currently have for your outbound server and port? -
Unable to connect to unsecured wifi
My iPhone was unable to connect to my workplace unsecured wifi. The IP address, as well as the other details are as follows:
IP Adress : 10.182.203.17
Subnet Mask : 255.255.255.192
Default Gateway : 10.182.203.1
Preferred DNS Server : 161.142.201.17
Alternate DNS Server : 161.142.2.17
I faced no problem in connecting to the network using my laptop or other mobile devices. Please advise for the correct setting as this is the only mean of communication on my workplace. Thank you.Is your employer doing MAC address filtering? A completely unsecured wireless network in a place of business just seems stupid. MAC address filtering would only allow specific network adapters to connect (for example, those in company owned/approved devices) and would not be apparent to anyone attempting to connect casually.
If so, you'll have to ask them to add the MAC address for your phone to the permitted devices list. -
Lumia 620 unable to connect to PC
My lumia 620 is unable to connect to my win 8.1 pc. Whenever I plugin my device it starts getting charged but nothing shows up so that I could access the files in my mobile. It was working all right till a couple of days back; then I came across this "Project my Screen app". As I was unable to project my device, I follwed the instructions as posted here . I deleted my drivers associated with windows phone just in hope to get it working, but I failed. I looked for troubleshoot and got this . I tried the each step mentioned but it didn't materialise. Kindly help me out.
Hi Roshanrims,
Thank you for reaching out to us. Let's go with the connectivity issue first. Are you getting the same issue when you connect your phone to another PC? To further isolate the issue, you can try other troubleshooting steps found on the below link:
• The cable connection to my computer does not work
Note: The link is intended for the Philippines. Let us know your location so we can give you the correct link.
As for the Project My Screen, see this: Project my phone screen to a TV or PC.
We look forward to your reply. -
I connect an USB pen to Technicolor router for content sharing.
All pc's can access to this shared partition except my Mac that give allways the message "Unable to connect the server".
I tried inserting the IP adress or using finder but .
Can anyone give me a hint?
ThanksHi,
I suggest you to follow the below steps to import Publish Settings File using Visual Studio
In Visual Studio 2013, open Solution Explorer, right-click the project then click Add and then Connected Service....
In the Services Manager dialog, click Create service..., then select <Import...> from Subscription in the Create Mobile Service dialog.
In Import Azure Subscriptions, click Download subscription file, login to your Azure account (if required), click Save when your browser requests to save the file.
NOTE: The login window is displayed in the browser, which may be behind your Visual Studio window. Remember to make a note of where you saved the downloaded .publishsettings file. You can skip this step if your project is already connected
to your Azure subscription.
Click Browse, navigate to the location where you saved the .publishsettings file, select the file, then click Open and then Import.
Visual Studio imports the data needed to connect to your Azure subscription. When your subscription already has one or more existing mobile services, the service names are displayed.
NOTE: After importing the publish settings, consider deleting the downloaded .publishsettings file as it contains information that can be used by others to access your account. Secure the file if you plan to keep it for use in other
connected app projects.
Hope this helps !
Regards,
Sowmya -
Unable to Connect to Applications
On an 8820 Model running on an Enterprise Server. I have installed Wachovia Mobile Banking Ver. 3.0 {Vendor: Firehorn Holdings} Install and set up completed fine. Open Mobile Banking and select the Activate Option or Browse Providers option and Select Wachovia or any other Bank listed I always get the following Error Screen in BB:
"The application MobileBanking has attempted to open an external connection which is not allowed by the application's permissions"
I went into Options>Advanced Options>Applications>Mobile Banking and Edit Permissions and set the Connections to Allow as well as Interactions to Allow and User Data to Allow and saved settings. But I still get the above Error any time I try to connect to Mobile Banking. I have restarted the device several times. I have checked other Applications and attempt to connect and get similar messages. I follow above steps and make sure Application Permissions are set to Allow. I confirm that Data Service is functional and Email and Text Messages are Sent/Received. I also confirm that the BB Browser is able to connect to the Internet.
What has to be done to correct the above Unable to Connect Error when using Applications.Sounds like your BES IT policy is preventing the software from accessing the web.
-
"Unable to connect to iTunes Store" 90% of the time
I have a 3rd Gen iPad with wifi only that I bought about 40 days ago. Initially I had no problem downloading and updating apps but in the past few weeks I get "unable to connect to iTunes Store" over 90% of the time. I always verfity the Internet connection is good and I've tried on my home wifi, my cellphone's mobile hotspot, and several hotel wifi connections. The other day I went into settings and noticed the Security code for my Credit Card was blank so I filled it in and clicked "done". Unable to connect so I checked back and the code was still blank. I deleted and redid my CC info and messed with some other settings and iTunes finally let me update some apps. Now I'm back home and it's giving me the error message again. I'm wondering if this is a known issue or if there's a fix for it.
Usually it's because you are not connecting to the internet via wifi.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Cheers, Tom -
Unable to connect to a particular WIFI network
I am unable to connect to a particular wifi connect via my laptop which has windows 7 installed. The WIFI is password protected and I know the password, I am able to connect to that network using my mobile phone and other friends laptop.
I have also checked the router configuration to check my Wireless MAC is not blacklisted. The same laptop is able to connect to other WIFI networks without any problem. The problem is not with wifi drivers because I am able to connect to WIFI networks...
Is there any other configuration in the router that is preventing my laptop WIFI from getting connected ?
http://www.geocities.com/preetam_ghosh87/mysite.htmHi,
Did you get any error message when you can’t connect to the Wifi? Can you find any related information in the Event View?
You can make the computer connect to others Wifi and check if it works.
Regards.
Spencer
TechNet Community Support -
HT4061 my computer unable to connect itunes server
my computer unable to connect itunes server,even itune help is also not connect to server
the massage will be "iTunes Help is unavailable because your computer isn’t connected to the Internet.in diagnostics report
Microsoft Windows 7 x64 Home Basic Edition (Build 7600)
Dell Inc. Inspiron 1545
iTunes 11.0.0.163
QuickTime not available
FairPlay 2.2.32
Apple Application Support 2.3.2
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.0.1.3
Apple Mobile Device Driver 1.63.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 00DABA000B0C13D0
Current user is not an administrator.
The current local date and time is 2012-12-12 11:43:11.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.0.0.163 (x64) is currently running.
iTunesHelper 11.0.0.163 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {A21769EE-B8FA-43A8-ACC9-8B4AC6B200C6}
Description: Microsoft Virtual WiFi Miniport Adapter #2
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: No
DHCP Server:
Lease Obtained: Wed Dec 31 16:00:00 1969
Lease Expires: Wed Dec 31 16:00:00 1969
DNS Servers:
Adapter Name: {61D7CACF-EC6D-4ED3-BAE8-0FE3AC647BFF}
Description: Dell Wireless 1397 WLAN Mini-Card
IP Address: 192.168.1.5
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Wed Dec 12 09:36:06 2012
Lease Expires: Thu Dec 13 09:36:06 2012
DNS Servers: 192.168.1.1
Adapter Name: {27D403C7-FE78-4FBE-B11B-6D449ACA2B11}
Description: Bluetooth Device (Personal Area Network)
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 16:00:00 1969
Lease Expires: Wed Dec 31 16:00:00 1969
DNS Servers:
Adapter Name: {EAB5F805-06F2-4343-AB41-C1BB2A0028F5}
Description: Marvell Yukon 88E8040 PCI-E Fast Ethernet Controller
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 16:00:00 1969
Lease Expires: Wed Dec 31 16:00:00 1969
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Basic connection to the store failed.
The network connection timed out.
Connection attempt to Gracenote server was successful.
The network connection timed out.
iTunes has never successfully accessed the iTunes Store.
Maybe you are looking for
-
Email pushing not working correctly for office email - 3 seperate devices/carriers
We switched email hosts several months ago and since our email pushing has not worked correctly. Our host/IT guy has been very unwilling to help me through this (I get the pleasure of being the in-house IT source) I personally am on AT&T have no prob
-
I have a dv5 the touch pad is not working
product is HP Pavillon dv5 the operating system is Windows 7. It has been about 3days since my touch pad has worked. It was not working when I was starting my backup on an clickfree system
-
Catalog Won't Sync With iTunes
HP Desktop w Pentium D processor, 4GB RAM, lots of HD space, Photoshop Elements 8, Win 7 (64bit), PNY GeForce 9400GT graphics w/ latest driver. Everything works if I create a NEW catalog. But when using my existing catalog (~10,000 photos) I can't
-
Hello Experts, I am trying to load Text master data for Web Survey. Zero records are found. Also in CRM system in TCode RSA3 there are Zero records. But when I load Transaction data in the Cube the data is getting recorded in the cube. But even for T
-
Before Firefox 5, the "go back one page" history would show 10 or more prior pages for each tab, so that I could go back quite a way in retracing my browsing steps. With Firefox 5.0.1 and 6, however, the list of prior pages seems to have been capped