E61i weird WLAN behaviour

I recently updated the firmware on the E61i and have noticed a few quirks with the WLAN behaviour.
I'm using the phone in a university where there are a lot of WiFi access points dotted around with the same names. The phone is setup to access email accounts via IMAP at regular intervals, using a Access Point Group setup.
I always have WLAN Scanning on for that purpose.
This all works fine (and it checks the email regularly), but when it does, it adds a dummy WLAN access point to the scan list. If I click on the 'Search for WLAN' option while it's connected to the email server the list will for example contain two access points one called 'University' which is defined (and has the blue circle next to it), but another also named 'University' without a blue symbol.
It might sound like a cosmetic thing, but since this 'dummy' access point appears first in the list it causes problems using the WLAN at the same time. If I click on 'Continue Web Browsing' the phone gets confused and asks me to define an access point: despite being connected to one and asking to use it!
Other applications seem to be a bit confused by it, but it's not as clear cut as the example above. I can reproduce it by using 'Search for WLAN' (no duplicate) then opening the mail app and forcing connection and again trying 'Search for WLAN' (instant broken duplicate).
Very odd - and didn't happen on previous firmware.
Anyone seen this or know a fix?

Just a quick update: this behaviour happens on other WLAN networks even where this only one access point. Connecting to email creates duplicate dummy entries in the WLAN search list.
Attempting to connect via the dummy entries gets an 'already connected' error. Unfortunately there is no way to tell the dummy from the real (although it always shows max connection strength).
Very, very, odd.

Similar Messages

[solved] laptop - weird keyboard behaviour

Hello,
since upgrading to kernel 3.2.1.1 (same with 3.2.1.2) I have a weird keyboard behaviour.
I have to press ESC to leave this weird mode.
This problem is similiar to
https://bbs.archlinux.org/viewtopic.php?id=86026
Do some people have the same problem?
My laptop is Dell Vostro 1310.
// ok... this never was a kernel software issue
// my keyboards shift was just a bit... loosely
Last edited by xinit (2012-04-26 19:09:04)

same for me, for about one week, on 2 different systems. I'm using KDE4 but some other people reported this problem on Gnome too. It generally stops when I strike the key again a few times.
It happened when I showed someone how cool Linux was, and then it opened 60 occurences of the same images I wanted to cut and paste...
Last edited by farvardin (2009-12-03 20:22:14)

BCM4322 wireless weird burst behaviour.

I have a Dell studio xps 1340, with the BCM4322 wireless card. Everything work fine with the broadcom-wl driver, however, I seem to get this weird burst behaviour. By this I mean, my network connection seems to be available for only 1-2 seconds before it cuts off and then reactivates another 1-2 seconds later.
I'm running KDE 4.5 using the networkmanager plasmoid. Here is a screenshot of said behaviour:
Can anyone explain to me why this is happening and if I can fix it in any way?
Last edited by nan (2010-10-12 00:43:54)

I've switched to wicd and everything seems to be fine now... Sometimes I get a random disconnect but it's pretty rare.

[E61i] PSK WLAN key isn't saved, why?

Hi there,
I want to know, why it isn't possible to store / save PSK WLAN keys for WLAN networks I regularly access as in Windows??
I find this very annoying. Is there any extension to change this behaviour?
Hardware: Nokia E61i
Firmware: v.2.0633.65.01, RM-227
Thanks for your help in advance.
Kind regards.
FW 3.0633.69.00 (06-02-08), RM-227
Nokia E61i-1, Carrier: Vodafone Germany

Try calling Apple Customer Relatioons at 800-767-2775 and discussing your problems with them.

Strange WLAN behaviour of iPhone

Hello.
I recognized a behaviour I cannot understand:
Sometimes when my iPhone logs in at my WLAN router (Fritzbox) there seems to be a double / parallel login at the router. But let me describe it step by step:
1. start conditions:
Router just switched on, no WLAN devices logged in. DHCP enabled.
iPhone: WLAN disabled
2. iPhone: Wlan enabled. Login process at router starts.
3. iPhone gets regular IP-address 192.168.178.xxx
4. another device called iPhone2 appears at router (not sure about the MAC-address, maybe no one)
5. iPhone2 disappears and an IP-address 10.2xx.xxx.xxx appears (with no MAC-address)
6. IP-address 10.2xx.xxx.xxx remains in the router even after iPhone WLAN is disabled or switched off until router is resetted
Before I recognized the correlation with the iPhone I already discussed with AVM (router manufacturer) about the IP-address 10.2xx.xxx.xxx in the router's table but they have no explanation so far. I guess when they hear about the correlation with the iPhone they will no longer be interested in this as it seems to be an iPhone caused "problem" (if it really is a problem).
Strange is also that the behaviour ist not deterministic but sporadic. I cannot always reproduce the behaviour.
I just want to understand the behaviour. So are there any explanations for this? Maybe mobile me push?
Or... ???
regards
bruegge

UPDATE:
correction to 4. "iPhone2" has exactly the same MAC-address as "iPhone"

Weird JFrame behaviour in 1.4.1

I have an application that runs fine under 1.4.0. It has a main JFrame where most of the action happens, but from time to time, it wants to display another JFrame, which is hassle-free under 1.4.0.
Under 1.4.1, the main JFrame is fine, but the second JFrame only semi-displays, and I've tried to figure it out, but nothing I'm trying is helping. You can see a small part of the top left-hand corner of the frame, and you can see its edges, and you can click on the menu bar, which will popup the menu items, which are functional. The rest of the frame looks like whatever is behind it: if you drag it around, the copied background moves around too, but if you drag it partially offscreen, then when you drag it back, it contains sort of skidmarks or smears (stuff that was at the visible edge, smears).
I'm at a loss as to what could be causing this weird behaviour, and would appreciate any insights or clues as to how to (continue to) go about fixing it.
Thanks
Charlene Abrams
Tripos, Inc
St Louis, MO

Then maybe you have some code that is catching an exception and ignoring it.
Do you have any empty catch clauses?
catch (SomeEvent e) { }

Weird keyboard behaviour in TTY

Good evening,
I just reinstalled Arch Linux on a VPS and I am experiencing some weird behaviour.
I created the Arch Image on my local machine and when it was setup with the most basic features I did send it to the VPs company for them to run.
When I connect to this new install with putty over SSH everything is going fine and my keyboard works.
However when I connect via putty to the 'lights out' service of this VPS and thus reach some kind of TTY environment the keyboard behaviour is totally different! I do not mind that my arrows do not work, or that all the F keys are giving me weird characters. But the most annoying of all is that my Return key (or enter how you want to call it) does print the first character of the command I just typed and does a line break. It is incredibly weird and thus I made you guys a photo.
As you can see when I type uptime then the U is displayed on a new line and nothing happens. If I hit return again then the system will say that the command U does not exists.
However if you continue typing as you can see in the second example then in the end you do get what you want. As you can imagine this is not what should happen.
/etc/vconsole.conf
KEYMAP=uk
FONT=Lat2-Terminus16
FONT_MAP=
I also tried to enable keymap in the hooks of mkinitcpio.conf but this did not make any difference. I am not sure if the keymap is the problem, if I load it manually it also does not make any difference to the TTY.
Yet again, via SSH nothing is wrong and all works fine. However when I connect with putty to the 'lights out' service then it goes wrong.
Does anybody have an idea what is going on?
Edit:
Added thumbnail image. Sorry Inxsible
Last edited by ruurdkrekt (2013-04-11 20:39:13)

jacobopantoja wrote:
ruurdkrekt wrote:Good evening,
When I connect to this new install with putty over SSH everything is going fine and my keyboard works.
However when I connect via putty to the 'lights out' service of this VPS and thus reach some kind of TTY environment the keyboard behaviour is totally different!
What I understand is that you are having no problems with SSH, but you are having with PuTTY. Is that right? If so, try playing with PuTTY's settings.
I do use putty to connect to SSH and to the 'lights out'-service of the VPS the arch install is hosted. So in my opinion in both cases it should work the same. However the 'lights out'-service looks as if you are directly connected to the machine via a keyboard and monitor. You also will see all the boot information and the services being started. When it is done booting it will display the login view. I believe you call all of what I just explained a TTY, am I correct?
So if I use putty to connect to these services how come the SSH version works but the 'lights out'-version does not?

N91 weird WLAN problem

Hi, Good day to you all!
I have a weird problem with my N91's WLAN, when it is in phone mode (general mode) I can't detect any access point or wifi hotspot on "connection manager>available WLAN" menu, even I'm just beside my wireless router, but when it is in offline mode, I can see all the available networks or hotspot but still I can't establish a connection between them, even on my own Wireless-N router at home.
does anyone here having the same proble like I do? is there a solution for this?
thanks guys, I hope somebody can help me.

Install the latest firmware for your N91 8gb if you haven't done so. If you got the latest firmware, make a backup & hard reset your phone. Its a series 60, it can be formatted, & firmware will be installed as in factory conditioned.
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

Behringer FCA202 - weird metronome behaviour

Hi,
I could get my hands on a Behringer FCA202 firewire audio interface for a real nice price. It works fine, except for 1 thing: when I switched on the metronome - no sound! Now the weird thing: after I created an audio track and a bus with reverb, I heard my metronome, but with LOTS of reverb. So, I looked into the Environment: ahhhh... the Klopfgeist channel strip has it's output set to Bus1. That explained the weirdness! So, I changed the output to Output 1-2, and saved this as a new template. But... if I open this template, The Klopfgeist channel strip's output is set to Bus1 again.... WEIRD!
Now, it's not a disaster to go to the Environment and change Bus1 to Output1-2, but if there's a trick to prevent this behaviour, I'd like to know....
For your info: until now, I simply used the iMac's built in audio input/outputs, and the metronome behaved the way it should.
Anyone have a clue??
Thanks!
Regards,
Jaap

Hi MigCla,
Unplug everything except your magsafe from your macbook.
Try to boot into safe mode by booting and press shift key, repair your permission by opening application folder > utilities > disk utility > repair disk.
And reconnect that firewire card afterward, and re-set up if it shows back up in audio/midi set up.
If your Firewire card have any driver that comes with, re-install it or check their sites for newer driver if available.
Good Luck.

Weird Oracle behaviour (insert)

hi there,
I experience this weird behaviour whith an oracle jdbc-conection:
( Class.forName ("oracle.jdbc.driver.OracleDriver");
conn = DriverManager.getConnection
("jdbc:oracle:thin:@machine:port:database","bla", "bla");)
If I insert a few rows in a table, close the statement and do an commit() (autocommit is false) and close the connection, the data is NOT in the database.
and now comes the funny part:
IF I FORCE AN EXCEPTION AFTER INSERT AND BEFORE COMMIT,
THE DATA IS IN THE DATABASE !!!
code:
if (conn.isReadOnly()) {
     conn.setReadOnly( false );
conn.setAutoCommit(false);
p1 = inhalt.indexOf("\n");
PreparedStatement pstmt = conn.prepareStatement(sql);
while (p1 >= 0) {
zeile = inhalt.substring(0,p1);
inhalt = inhalt.substring(p1+1);
pstmt.setString(1,datei);
pstmt.setString(2,zeile);
i1 = pstmt.executeUpdate();
logIt("vms.machmal:doLoad:ergebnissql #"+i1+"#");
p1 = inhalt.indexOf("\n");
} // end while
pstmt.close();
// if I force e.g. a nullpointer-exception here, the data is in the database...
conn.commit ();
erg = 0;
fehlertext = "Datei "+datei+" geladen";
catch(Exception e)
e.printStackTrace();
     erg = -1;
     fehlertext = "Fehler beim Laden der Datei "+datei+": "+e.getMessage();
finally {
lServletDlgView.setRc(""+erg);
lServletDlgView.setHinweis(fehlertext);
return erg;
Is this a bug?
please,please, help me!
thanks a lot in advance,
frank

So perhaps there's anybody out there who knows the
oracle driver....?This is my reasoning:
- I have used the oracle driver successfully.
- And probably a lot of other people have used it successfully as well.
- Throwing an exception does not impact the driver.
When I have a situation that seems impossible I usually find it is because I have made an assumption that is wrong. Which is why I say "examine your assumptions."
For example I once spent quite a bit of time, at least several hours, trying to figure out why the data that I was inserting into a database wasn't getting into the database. I had many logs. And I tried various scenarios to reduce the code and running the SQL directly in the gui for the database. The results that I was seeing was simply not possible.
I finally realized that the code was running against a different database than the one I was looking at.

Weird Photoshop behaviour- becomes unresponsive

I'm having a weird behaviour with Photoshop CS4. Sometimes when I have some other application or applications open. I will be unable to use any of the menus of photoshop. If i close some of my applications and then restart Photoshop then it will work. It seems like a memory management issue. Anybody else has this problem?

Update CS4 to 11.0.1?
Buy and install more RAM.
Don't have so many other applications running in the background.
Go to MSconfig, startup and turn off items that you do not need running will help too. You can always start them manually.
mikelovem wrote:
I'm having a weird behaviour with Photoshop CS4. Sometimes when I have some other application or applications open. I will be unable to use any of the menus of photoshop. If i close some of my applications and then restart Photoshop then it will work. It seems like a memory management issue. Anybody else has this problem?

E61i WPA Wlan not working

Hi,
I have D-Link WLan router.
From my E61i I am unable to connect.
currently the WLAN router supports WPA mode.
My E61i trying for long to connect.....
if there is no password protection then its working fine.
what could be the reason.
Should I change it to WEP mode?
sudipta

I think u should add the WLAN MAC address to the router.
I had the same problem with me in my company and the tech specialist told me to add the mac address to the router in order ot use the wi-fi

E61i "No WLAN Network Found"

OK, so I bought this E61i at the beginning of November and for the first month it was great. I was amazed at how easy it was to connect to home WLAN and any other open WLAN for that matter.
Then for no reason one day it says "No WLAN network found". I've made no changes to my home network and I know its working because both my laptop and desktop operate on WLAN.
I tried using the connection wizard several times to set up a connection but got the same results "No WLAN network found".
So then I called Nokia support. They asked what version of firmware I had. According to the person on the phone I was up to date but he had me download and install it again. This did not fix the problem still "No WLAN network found".
So I called back and explained the situation and I was told that there must be something wrong with my phone and that I should send it in for warranty repair. So I send the phone to the Nokia repair place somewhere is Alabama.
After about two weeks I get the phone back with a repair slip saying that the phone has been repaired by updating the firmware (which by the way I had already done). Of course when I tested the phone I get the same results "No WLAN Network Found".
So I called Nokia Support (which at this point is a contradiction in terms as they were of very little help) and was told to return the phone to Nokia warranty repair so that it could be brought to the Quality Assurance Managers attention.
I have to say that this is the most ridiculous thing I've ever heard of. I mean I have to send the thing at my expense (not cheap by the way) and now I have to send it back again.
What could be causing the phone to not detect any WLAN? Any help is greatly appreciated.

Up to this point nobody has been able to help. I've decided to send it back to Nokia and give them another shot at fixing the phone. I really have no other choice.
I bought the phone at TigerDirect.com and they have an agreement with Nokia that they don't do exchanges. They will only send the phone off for repair within the first 30 days. After that, I'm on my own. Since the phone didn't start acting up until after the 30 day mark I'm out of luck there.
I'm really not happy about sending the phone back to Nokia again as they didn't fix it the first time. So, My confidence level in them is much less than ideal.
I just have this sinking feeling that I may be doing something wrong with the phone (setting-wise) that started this whole mess in the first place, and that it's something simple. I just don't know what it is and noone has been able to help. Not even Nokia support. It's frustrating! I can't help but think that I might have been better off with my second choice the HTC Touch.

E61i weird keyboard issue

Hi all,
I've got an E61i (made by Nokia) version that is unlocked.
the weird issue is that every keyboard is correct except two keys.
in order for me to get type a ?, I have to use the key marked as / and vice versa.
it seems my keyboard is either printed incorrectly, or there is a setting somewhere that is configuring the keys incorrectly.
every other key is perfectly marked and types the correct symbol/letter.
is there any way to correct this?
please help!!

20-Nov-200701:45 PM
darkmagic wrote:
can i buy the keyboard and change it out to work properly?
Buy correct key mat should be doable. Though can't support from where.
In sw update, package is set to match product code. In service points, people might have knowledge how to change your input keypad type (to match the mat you have).

Memory timings, weird bios behaviour, frustration...

Hi.
I recently bought a MSI 875P mobo, a P4c 2.4GHz to go with it and also 2x512MB Kingston HyperX PC3200 memory.
First thing I did was flash the bios to the newest version (1.8), which, after reading things from another thread might not have been such a great idea after all.
Seems that the CAS latency setting in the bios does not do anything. No matter if its set to 2, 2.5 or 3, CPU-Z always shows 2. Also, im getting quite frustratign results when overclocking with this mobo, no matter how much voltage I give to the memory (I have tried as much as 3,2v) whenever the memory bus is over 200MHz the system wont be stable. It seems as if the memory voltage setting doesnt do anything, as it doesnt matter if its set to 2.5 or 3.2 it wont be any more or less stable. (I know over 200MHz is over spec for this memory but the mem is supposed to do alot better than that, especially when increasing the voltage.) Also even with low memory speeds im unable to get the CPU to go very high... it does 3GHz (250MHz FSB) fine with default core voltage, but anything above that wont be stable no matter what CPU core voltage I use. Could be my CPU, but I suspect the motherboard to be the reason with so many faults already.
Theres also some weird behaviour by the bios I have seen. For example, sometimes the AGP/PCI divider has three settings (66,75,83MHz) and sometimes it allows me to set the frequencies by 1MHz steps, but still so that there is no 66MHz setting at all, just 67 - 83MHz and one extra setting which gets adjusted as I adjust the FSB. Also, sometimes when I try to go into the BIOS setup, I only get a black screen. This often happens if I press some other key (for example tab) before pressing del during POST. weird and extremely annoying.
Is there any hope that issues such as these would be resolved in a future bios update? I'm a little frustrated after setting up this system with watercooling etc. and now being stuck with this motherboard doing weird things and certainly not being a good mobo for overclocking!
In case these issues wont be solved in the near future, I will propably switch to another brand motherboard... Anyone reading these boards with good experience from other manufacturers, preferably similar boards as the 875P in terms of features (wanted ones)?
any help appreciated (preferably from someone from MSI),thanks.

Quote
Originally posted by DOS
If you set any performance setting other than Slow the memory timings are set for you. If you want to overclock to 3G set the ram voltage to max 2.8, set the performance mode to Slow (bad term - is should be 'Normal'), set the DRAM clock to 333 (this will run the ram at 320 when FSB is at 200, also referred to as 5:4 ratio), set your FSB to 250. This will clock the ram at 400. You should be able then go further.
This is what I have done, the performance setting is set to slow, and even right now I have CAS 3 set in the bios but cpu-z still shows its using CAS 2. Using 333MHz DRAM clock with 250MHz FSB is stable at all default voltages, but anything above those wont work, no matter what voltages. If I set the FSB to 255, it wont be stable anymore, not even with 1.7v vcore and 3.3v memory voltage. Even setting the DRAM clock to 266MHz wont be stable with 255FSB. Also, running a lower FSB with a higher memory clock, so that the FSB is lower but memory goes above 200MHz wont be stable no matter what.

E61i weird WLAN behaviour

Similar Messages

Maybe you are looking for