E61i - will not auto-connect to WLAN for SIP

Although my SIP client is set to "always on," the phone will not connect to a WLAN network. If I go into the SIP profile settings, change it to "as needed," then change it back, the phone will prompt me and connect.
Does everyone else's E61i behave this way? I don't have a sim card in the phone right now... do you think that could be it?
I have my Gizmo Project account set up and have made and received calls successfully, even with my Grandcentral account.
Thanks very much for reading.
Todd
Message Edited by teye on 18-Dec-2007 04:11 PM

No, Hyundai Veloster.
Funny, cause I did see the forum on a subaru.
It's connecting... I just have to do it every time I get in my car. I had no problem with the razor connecting automatically.

Similar Messages

TS1398 Since I upgraded to iOS 7.0.2 my phone will not auto-connect to the home WiFi network.

I upgraded my iPhone 4S to iOS 7.0.2 and now my phone will not auto-connect to the home wifi network. Each time I leave and return to within range of the network I have to remember to manually connect, otherwise it continues to use 4G for data. The credentials are saved (all I have to do is tap it to connect) but just won't happen automatically any more.
Is anyone else seeing this problem?

Tried the reset multiple times. No go. Before the IOS 7.0,2 update my devices were connecting to home WIFI eventually.

My iPad will not auto-connect to my network. I need to type in a security key each time. Is there a way aound this?

my iPad will not auto-connect to my network. I need to type in a security key each time. Is there a way aound this?
Thanks

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Turbo will not AUTO CONNECT to my car's blue tooth.

Turbo will not AUTO CONNECT to my car's blue tooth. I have to manually do it each time I get in my car. HOW DO I AUTO CONNECT IT?!
thanks

No, Hyundai Veloster.
Funny, cause I did see the forum on a subaru.
It's connecting... I just have to do it every time I get in my car. I had no problem with the razor connecting automatically.

Airport Extreme will not auto connect after poewr out with USB Hub!

Hi all,
I have just purchased the Airport Extreme and have it connected to my ADSL router. All works fine but if the airport looses power (as the household power went off momentarily today) then once it powers back up it will not connect to the internet unless I unplug the USB hub connected to it first.
Anyone with similar experiences?

vtwiz wrote:
Hi all,
I have just purchased the Airport Extreme and have it connected to my ADSL router. All works fine but if the airport looses power (as the household power went off momentarily today) then once it powers back up it will not connect to the internet unless I unplug the USB hub connected to it first.
Anyone with similar experiences?
No
Your issue may have something to do with your ADSL router and/or ISP carrier when you have power interruption.
I would contact Apple to take advantage of your free 90 days of tech support by phone since your product is "new." Let them tell you what the problem is.
There are 2 Airport Extreme forums - http://discussions.apple.com/category.jspa?categoryID=140

After Ana WLAN not auto connecting

After I upgraded to Anna (N8/Slovenia) a lot of Nokia applications can not connect to the Internet automatically anymore.
My setup for "Data use in home country" is Always ask (or WLAN only) as I don't have any data plans with my provider. Also I set WLAN scanning to OFF. Then I try to access internet with Nokia browser and I get "Unable to connect" error. The same goes for Ovi Store, Here and Now, Ovi Daily App and some other Nokia applications. The only way to get it working is if I manually connect to the WLAN before using those applications.
At the same time other applications work as expected, for example I can browse internet with Opera Mini, connect with Skype, Fring, Sports Tracker, Exchanger and others. They ask me to connect to the WLAN or when starting up.
Before the upgrade all this worked.

Mine is the same...... No auto connect to wlan, I have to connect manual first.
Also I cannot connect via any of my data plan settings !!! Im not a happy man
Is there a fix for this ?? Please help

I am trying to activate LR6 on a laptop that will not be connected to the internet. I have clicked on the link for offline activation, but it says to follow the instructions till it says "having trouble connecting to the internet". I never get there. H

I am trying to activate LR6 on a laptop that will not be connected to the internet. I have clicked on the link for offline activation, but it says to follow the instructions till it says "having trouble connecting to the internet". I never get there. How do I get it to generate the code that I can take to an internet enabled device so I can validate it?

http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

My images will not auto resize for viewing

This is somewhat embarrassing. When viewing images from the web, if they're too large to fit the current window, they get re-sized to fit. Okay. I have a file/page of thumbnails generated by XnView and when I click, the image is loaded, everything is good except the image is always larger than the window. The problem is Firefox WILL NOT auto-resize the image to fit. If I right mouse, I can select "View Image" to view whole image, but I don't want to have to do that for 1000's of images.
Any help/insight would be appreciated.
Regards,
Dave

Lilly.Love wrote:
Hi, I'm new to this and for some reason my images are not appearing to full scale on adobe premiere cs6. This is really annoying as I am trying to make a stop motion video but I can't see what I'm doing. Please reply soon, this is an important project. Thanks
Your sequence settings and clip settings are not matching. To make them match, right click on a clip and choose New Sequence from Clip and a new sequence will be created based on your clip settings.

Ipod will not stay connected for more then a few seconds

I was going to update my nano this morning after downloading the newest version of software, and first off it said the firmware was corrupt. so then I restored it, and it would not restore to the new version so i used the older version. the ipod seems to work in my hand but when i connect it to my computer it will not stay connected for more then a few seconds, then it ejects its self, but itunes still shows it as being there even though the rest of the computer does not
I have not had any issues with it since i bought it which was last june.
any ideas?
John

Hi John,
I would suggest, with your iPod disconnected, that you force your iPod into disk mode (following the instructions in this article)
Connect your iPod to your computer.
Then, try restoring it in iTunes while it is connected in disk mode.
Can you successfully restore your iPod?
If so, when the restoring and resyncing process is all complete, now update your iPod to the latest firmware.
Any success with trying that?
-Kylene

I have had my iphone 4 for less than 3 months and i always have it in a protective case, recently my bluetooth that i use daily will not stay connected, my alarm clock will not ring, any suggestions on whats going on??

i have had my iphone 4s for less than 3 months and i always have it in a protective case, recently my bluetooth that i use daily will not stay connected, my alarm clock will not ring, any suggestions on whats going on??

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

No auto-connect to WLAN with hidden SSID

I work in Infrastructure Services at the IBM Zurich Research Laboratory.
Across IBM, there is a standard setup for wireless LAN access. There’s a public WLAN that provides access only to the internet; and there’s a private WLAN that provides access to both the internet and the corporate intranet. The private WLAN requires authentication via WPA/WPA2 Enterprise using LEAP or a certificate, and has a hidden SSID.
Both WLANs are served by the same access points.
The iPhone and iPod Touch do not automatically reconnect to the private WLAN with the hidden SSID.
Each time the iPhone wakes from sleep, the user must connect manually to the private WLAN. The user must go into Settings and then Wi-Fi, wait for the private WLAN to appear in the list (there’s always a delay) and then tap on it. Also, if one opens Mail or Safari application before connecting manually, the the blue pop-up list of available networks will not include the private WLAN with the hidden SSID.
This is a major inconvenience, because it adds half a minute or more to each operation that requires network access. Checking one’s email—something that should normally take no more than ten seconds—instead takes a minute or more, depending on how quickly one manages to connect.
This bug also results in needless expense, because network operations that should go over the local WLAN often go instead over the mobile phone network.
The inability of the iPhone/iPod Touch to reconnect automatically to networks with hidden SSID has been a problem since the original iPhone came out.
This problem is an obstacle preventing wider adoption of the iPhone within IBM.

Anyone have an update on this ?
I have a new 3GS with 3.1.2 and have the same issue. I haven't tried the factory reset yet, but from this link;
http://l00pback.wordpress.com/2009/10/14/iphone-3-1-bug-no-auto-reconnect-to-hid den-ssid-wireless-networks/
“Work around”: Not really a workaround, but a sightly less frustrating way of reconnecting… when in range of the network… recreate the network by entering the SSID and leave out any of the security stuff then click Join. The join will fail (for obvious reasons), but will then “remind” the phone that that network exists and will then connect using the previously configured settings."
takes some of the pain away.

HT1695 I have the 1st generation iPad. All of a sudden it will not connect to my wi-fi. It finds my wi-fi, but will not totally connect. I have done everything...reset network, rebooted router etc and it still will not connect. Any suggestions?

I have the 1st generation iPad. All of a sudden it will not connect to my wi-fi. It finds my wi-fi, but will not totally connect. I have done everything...reset network, rebooted router etc and it still will not connect. My other divices are connected....iPhone and 3 Macs. Any suggestions?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

After updating with Security Update 2010-001, Quicken will not auto update. Auto update function in Preferences are also inop. Numerous posts in Macbook discussions about similar problems with other apps.

Installed Security Update 2012-001. Now Quicken will not auto save and the auto save function in Preferences cannot be changed. There are numerous similar comments in the Macbook discussions about other apps. Come on, Apple, we need some help out here!

Howdy,
Apparently some are reporting that this causes the older PowerPC (PPC) applications that are supported in 10.6 via 'Rosetta' to crash upon attempting to open/save/print using any dialog box, or fail in other similar ways such as simply not printing or quitting, or freezing/hanging/crashing of the application.
I have read of some companies that have indeed submitted proper bug reports to Apple, but that is not a guarantee of a bug-fix being issued.
You might wish to read:
http://www.macintouch.com/readerreports/snowleopard/index.html#d02feb2012
If you are unsure if you are still using PowerPC apps, if the application is currently running, look under the 'Activity Monitior' (in Applications -> Utilities), or alternatively you could check in the System Profiler, Applications. Check the column "Type".
Here is a fairly simple way you can restore you system and restore you applications functionality again, if you don't have a recent clone or good Time Machine backup that you can restore from. If you do, restore from your backup prior to having installed the Security Update 2012-001.
Time Machine restore: http://support.apple.com/kb/ht1427
If you are restoring a backup made by a Mac to the same Mac
With your backup drive connected, start up your Mac from the Lion recovery partition (Command-R at startup) or Mac OS X v10.6 installation disc. Then use the "Restore From Time Machine Backup" utility. Select the backup prior to your issues, and it will be restored back to the state it was in at that time.
If you can't easily restore from a backup, you can instead do the following:
- You first start by reinstalling your OS X 10.6.x, this will preserve all your user data, your applications, no worries there.
- Then install the Mac OS X 10.6.8 Update Combo v1.1 (links provided below)
- Make sure you're printers are showing up correctly in your system preferences, if not, re-add the printers
- Then finally, run the Apple Software Update (by pulling down the Apple Menu), and install any and all remaining updates, except do not then re-install the Security Update 2012-001. It is possible that you may have to reboot after installing some of the updates, and you may even need to run it a 2nd time to make sure that you've got all updates, except NOT the Security Update 2012-001.
Links for 10.6.8 Update Combo v1.1:
http://support.apple.com/kb/DL1399
or the link to directly download this 1.09GB combo updater:
http://support.apple.com/downloads/DL1399/en_US/MacOSXUpdCombo10.6.8.dmg
Cheers,
Daniel Feldman
=======================
MacMind
Certified Member of the
Apple Consultants Network
Apple Certified (ACHDS)
E-mail: [email protected]
Phone: 1-408-454-6649
URL : www.MacMind.com
=======================

Wi-fi connection does not auto connect on 21.5-inch mid 2010 imac help?

Wi-fi connection does not auto connect on 21.5-inch mid 2010 imac running OS X 10.8.3 (12D78) help? My wife's imac with OS X 10.6.8 has no problem getting on wi-fi automatically as well as my Ipad 2 running iOS 6.1.2

If you get a green light then you did not do a factory reset - you must disconnect all wires and follow the instructions above - you will end up with the Extreme blinking yellow - then use the Airport utility to set up the Extreme - you can put in your own names for the network, device etc. - when it comes to the passwords you can use ones of your own choice - it is not asking for the old one - if it is then it was not reset completely - try to reset again if necessary - it may take more than one try - if it still asks for a password then use "public" - it is the default - once you have set it up with your new information, and you have a green light, test the connection with your computer - if you can access the internet then you are all set - then try to a use the Apple TV with the new password - if the computer still asks for a password, then it is asking for the computer password and not the extreme or network password - I can't help you with that - you would have to ask that question on the iMac discussion group.

Iphone will not wirelessly connect to itunes

I have two iPhones, a 4 and now a 4s. The 4s will not consistantly connect wirelessly to iTunes. All phones and computer are on same WiFi network.
I cannot get the 4s to auto-sync to receive downloads. The 4 works fine and was the first phone linked to the iTunes.
.....Can two iphones use one instance of iTunes and one login and password?

Hi Mellet,
Welcome to the Support Communities!
You may need to uninstall iTunes and all of its components, and reinstall. This article explains how:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Cheers,
- Judy

E61i - will not auto-connect to WLAN for SIP

Similar Messages

Maybe you are looking for