E63 Alarm Clock and Date problem

Power off E63, when alarm clock ring, power on. The system date change.This problem happen almost every Sat. and Mon.. FW version 102.21.001

in my opinion this is a media cache issue.
activate Mass Storage mode and connect your device to your PC.
using the Explorer of the PC, view the Storm's two harddrives and especially the hidden files. You should see a file named BBThumbs.dat in every folder that contains a media file. Delete all those BBThumbs.dat files.
those files are media cache, and they may sometimes get corrupt. Deleting them will force the Media Manager to recreate the cache entirely.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Similar Messages

  • Clock and Date Problems

    I recently bought a second-hand G5 Dual 2.5 GHz Mac. I have found that whenever I turn it off and then turn it on again later the date returns to 1970 with the wrong time even though I locked the correct parameters in the system preferences - anuybody see or trouble shot this problem? any help appreciated

    Hi Keebeemo-
    Greetings and welcome to the Apple Discussion boards
    You definitely need a new battery. This may be helpful: Battery Replacement Instructions
    Luck-
    -DP
    Message was edited by: DaddyPaycheck

  • Clock and Date Reset

    I have Macbook Pro Mid 2010 running on Lion 10.7.4
    Every time I run out of battery and automatically shutdown, I get a message that my date is set to before 2001 and causing applications to behave irradically when I boot up for the first time.
    I need to change the clock and date in the system pref.
    This won't be happen if I shutdown the computer intentionally or make it sleep with enough battery.
    Why this is happen? How to fix this issue?
    It seems that the "safe deep sleep / hibernation" when the battery is running very2 low  is not working.
    Thank you,
    Setiawan T.

    Basically why I asked this question is :
    On Snow Leopard, when the battery reaching its "danger zone", let's say I forget to turn my MBP off when I go out for lunch, It will automatically deep sleep / hibernate. So I don't experience this kind of problem.
    However since I upgrade to Lion, I face this problem. It won't hibernate everytime the battery reach it's danger zone. Thus the clock and date are being reset.
    Regards.

  • HT201394 Nothing works .... Minimum: fix alarm clock and Bring back the animation in the weather....

    Nothing works .... Minimum: fix alarm clock and Bring back the animation in the weather....

    before this (iOS 7xx) i have not problems with phone and software but now it disaster.....

  • My clock and date keep going wrong

    My clock and date keep going wrong on my laptop. I have reset both date and time numerous times and it doesn't stay accurate. Can someone tell me what the problem is please.

    Hi
    You can try couple of steps might help you to resolve your issue.
    1) Please visit HP website and update the Bios on the unit check if the Time display correctly.
    2) Incase your are comfortable reseating the CMOS/RTC battery this will take care of the issue.
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • I performed a time machine backup without plugging my labtop into a power source. My computer died and all the settings were changed, ie the clock and date were changed back to 2001. So I tried to restore my computer using a previous time machine backup.

    I performed a time machine backup without plugging my labtop into a power source. My computer died and all the settings were changed, ie the clock and date were changed back to 2001. So I tried to restore my computer using a previous time machine backup. (which I now know was wrong). However, when time machine tried to restore it said there was not enough room to do a backup. It seems that it did a half backup because some essential  files such as system profiler are now missing. Can I undo this restore...? What can I do to fix this

    You need to do a full system restore, per Time Machine - Frequently Asked Question #14.
    If that sends a message, please note the exact wording.

  • Clock and date settings are not saved

    clock and date settings are not saved in lion

    I'd give AppleCare a call.
    AppleCare Support Phone Number: 1-800-275-2273
    open 6am to 6pm Pacific Time
    International Technical Support Numbers
    http://www.apple.com/support/contact/phone_contacts.html
    You may want to look under date & time and set the clock from the internet.  At least you will have the correct time after a while.
    RObert

  • Trouble with clock and date settings

    Hi Folks,
    Every time I start my G5 I get a message telling me to set the clock and date settings. I set them as requested and save them and put the little lock on them, but next time I start the computer the same message appears.
    Would anybody be able to assist please?
    Thanks in advance,
    Eddie

    You might need a new battery. Go to http://support.apple.com/manuals/ and find your exact model - the manual should show you where it's located and which type you need to buy. They're not expensive.

  • My alarm clock and other apps no longer play any sound. My ringer stills works, so what is causing that?

    My alarm clock and other apps no longer play any sound. Ringer is still working and i can not find any settings that are turning off the sound. What could cause this?

    I know for a fact apple doesn't want carriers fixing their phones. My carrier even warned me that they can't fix the phones only apple stores can fix them. Well guess what I just wasted my whole day by driving to an apple store they "fixed" my phone I got home and it started doing the same **** things they didn't fix **** now I have to waste even more time by finding a ups store to ship my phone to apple so that means I'm going to be out of a phone for over a week because they never fixed it or replaced it like they should have. I'm so upset with apple that if this new phone does the same things were dropping apple and are going to samsung. I wasted 4 hours driving and $40 in gas and 6 hours of my time for nothing. Apple needs to put in more store around the country if their not going to let the carriers fix the phones them selves.

  • N81 clock and date reseting to 00:00 when restarti...

    My clock and date reseting to 00:00 every time when switched off. Tried firmware update, factory settings or a different battery. Any idea?

    When the Mac automatically goes in stand-by it should have a minimum of energy left for that tiny  clock&date. It never happened with my 2010 Macbook pro, even plugging the power chord after minutes.

  • When i boot my ibook the clock and date keep changing?

    when i boot my ibook the clock and date keep changing?

    If the battery is dead (or not installed), this will happen. The solution is to keep it plugged into the adapter.
    Also, resetting the PMU may help.

  • N97 clock and date and general widgets

    how do i get rid of the clock and date, god this should be tiny and tucked out of the way........ or atleast be able to move it, it blocks every single picture i put up...... its the only thing that spoils it...... if there is a simple way of moving please let me know as i have gone through every option possible!!!  apart from that it is a great phone. 

    I'd give AppleCare a call.
    AppleCare Support Phone Number: 1-800-275-2273
    open 6am to 6pm Pacific Time
    International Technical Support Numbers
    http://www.apple.com/support/contact/phone_contacts.html
    You may want to look under date & time and set the clock from the internet.  At least you will have the correct time after a while.
    RObert

  • 9402 DAQmx C: Write Clock and Data on two diferrent lines.

    I am working with NI 9402 (4 I/O lines) and coding with DAQmx c (I AM NOT USING LABVIEW).
    I am trying to output the the data signal by port0/line1. Period required of each bit: 1us.(1 MHz)
    At the same time I am trying to output the clock signal by port0/line0. Period of each bit: 0,5us (2 MHz).
    For that purpose I have tried to write the data on port0/line1 with DAQmxWriteDigitalLines() and use the function DAQmxCfgBurstHandshakingTimingExportClock() to export the clock to port0/line0. 
    DAQmxWriteDigitalLines(taskData,DATA_SIZE,1,30.0,DAQmx_Val_GroupByChannel,data,NULL,NULL));
    DAQmxCfgBurstHandshakingTimingExportClock(taskData,DAQmx_Val_ContSamps,2000000,1000.0,"cDAQ1Mod1/port0/line0",DAQmx_Val_ActiveHigh,DAQmx_Val_Low,DAQmx_Val_ActiveHigh));
    When exectuing I get this error message:
    DAQmx Error: Requested value is not a supported value for this property. The property value may be invalid because it conflicts with another property.
    Property: DAQmx_SampTimingType
    Requested Value: DAQmx_Val_BurstHandshake
    You Can Select: DAQmx_Val_SampClk, DAQmx_Val_OnDemand
    Task Name: taskData
    Status Code: ­200077
    I guess that this mean that function DAQmxCfgBurstHandshakingTimingExportClock  is not supported on NI 9402..
    As I have not been able to solve this problemI decided to use DAQmxCfgSampClkTiming() instead of DAQmxCfgBurstHandshakingTimingExportClock().
    Since I will be using a SampClkTiming function I have created 2 separate tasks, with different clock rates for each one, and try to write separately the clock and the
    data arrays in line0 and line1.
    I am having troubles when I try to write both lines at the same time, this is the important part of the code I am using:
    TaskHandle  taskData=0,taskClock=0;
                  // DAQmx Configure Code
                  DAQmxErrChk (DAQmxCreateTask("taskData",&taskData));
                  DAQmxErrChk (DAQmxCreateTask("taskClock",&taskClock));
                  DAQmxErrChk (DAQmxCreateDOChan(taskClock,"cDAQ1Mod1/port0/line0","clkOut",DAQmx_Val_ChanPerLine));
                  DAQmxErrChk (DAQmxCreateDOChan(taskData,"cDAQ1Mod1/port0/line1","",DAQmx_Val_ChanPerLine));
                  DAQmxErrChk (DAQmxCfgSampClkTiming(taskData,NULL,1000000.0,DAQmx_Val_Rising,DAQmx_Val_FiniteSamps,DAQmx_Val_ContSamps)); //to define the 1 micro secnd Time of bit.
                  DAQmxErrChk (DAQmxCfgSampClkTiming(taskClock,NULL,2000000.0,DAQmx_Val_Rising,DAQmx_Val_FiniteSamps,DAQmx_Val_ContSamps));
    //2000000 because I want the clock array to be sent twice faster than the data array
                  // Set data & clock Arrays
    Define the clock array:             
                  for(i=0;i<1000;i++)              {clockD[i]=i%2;} /'1' and '0'
    Define data array:             
                  for(i=0;i<1000;i++)              {data[i]=1;} // or whatever random values..
                  // Write digital lines
    while(1)              {
                                DAQmxErrChk (DAQmxWriteDigitalLines(taskData,1000,1,30.0,DAQmx_Val_GroupByChannel,data,NULL,NULL));
                                DAQmxErrChk (DAQmxWriteDigitalLines(taskClock,1000,1,30.0,DAQmx_Val_GroupByChannel,clockD,NULL,NULL));
    After executing this code I get the error:
    DAQmx Error: NI Platform Services:  The specified resource is reserved. The operation could not be completed as specified.
    Task Name: taskClock
    Status Code: ­50103
    Nevertheless, If I just  use one of the DAQmxWriteDigitalLines function, the program works fine, and it send out the information ).
    By the way I noticed that if I Write a digital line in a for loop instead of while(1), if the number of iterations of the for loop is low (i.e. 10), I get the same error even if I just write call the DAQmxWriteDigitalLines() function once.
    Could these two errors be related ?
    To sum up:
    Could anyone give me a clue how two output a data signal and a clock signal  to 2 different ports with different clock rates for each signal ?
    Thank you very much

    One quick question about how you setup your timing:
    Spoiler (Highlight to read)
    DAQmxErrChk (DAQmxCfgSampClkTiming(taskData,NULL,1000000.0,DAQmx_Val_Rising,DAQmx_Val_FiniteSamps,DAQmx_Val_ContSamps));
    DAQmxErrChk (DAQmxCfgSampClkTiming(taskData,NULL,1000000.0,DAQmx_Val_Rising,DAQmx_Val_FiniteSamps,DAQmx_Val_ContSamps));
    If you are only going to write 1000 finite samples, then why are you specifying the number of samples to write here as "DAQmx_Val_ContSamps" and not 1000? See: Sample Clock Timing Reference
    Also, I gather what you are trying to do is output the DO task's sample clock on line0, at the same time that the DO task is running. If that's true, you should be able to export your sample clock using the export signal function. See: Export Signal Reference
    Hope this helps.

  • IOS 7.02 iPhone 5 clock and Calendar Problems

    The date displayed in the Calendar is always one day ahead of its day shown in the iPhone settings date. Also the clock for the various cities around the World are being incorrectly reflected. Seoul, Korea is shown 2.5 hours earlier than Shanghai time and Seoul is East of Shanghai and I believe it is only 1 hour ahead not 2.5 earlier as shown in iPhone. Never had these problems before update to iOS 7.02. The World Clock and calendar cannot be trusted any more and I hope Apple will correct soon!!!!

    Hello there, Duke4u.
    The following Knowledge Base article provides some great troubleshooting steps for your issue:
    iOS: Troubleshooting issues with date and time
    http://support.apple.com/kb/ts3920
    If you've already reviewed the settings for Date  & Time, what seems pertinent to you is the following:
    If the incorrect date, time, or time zone is being set up automatically on the device, please notify your cellular provider. In the meantime, tap General > Date & Time and turn off Set Automatically. Then set the appropriate time and time zone manually.
    Note: The option to set automatically might not be available on all carriers in all countries.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Issues with Alarm Clock and Calendar Notifications

    I have noticed that when I am using the Alarm clock, it will not go off when the calendar is showing a meeting reminder....
    Is there any way to dis-activate this? My alarm clock will not work.. and there are too many appts in my calendar to go thru them to change...

    I also have the same issue. If the alarm is set and the calendar sends a notification just prior to the alarm time, the calendar notification prevents the alarm from going off. I understand it is a bug, but when will it be fixed? What is the bug ID? how do we track known bugs so we know they are being fixed? The problem is with the iPhone's included clock and calendar apps, so it is not a 3rd Party application issue, right? Thanks!

Maybe you are looking for