E63 and TomTom Wireless GPS MkII receiver connecti...

Every time I am associating TomTom Wireless GPS MkII receiver with my E63, the Bluetooth connection drops withing just a few seconds and it doesn't reconnect again (it has to be paired again). That same GPS receiver works just fine with my laptop though. Is there any way to make it work with E63? There are no options on the receiver, just a power button. Does it need a "driver" of some sort? The E63 has the latest firmware available through Nokia Software Update tool.
Thanks!
Solved!
Go to Solution.

I solved my problem. It is not enough to pair TomTom Wireless GPS with E63. A Positioning option must be set to use Bluetooth GPS: Menu -> Tools -> Settings -> General -> Positioning -> Positioning Methods -> Bluetooth GPS. Once that option is checked, both Ovi Maps and Google Maps connect to my GPS receiver.

Similar Messages

IPhone and TomTom One GPS

I have an iPhone and a TomTom One.
The TomTom One is bluetooth capable and has a preference feature to connect to a bluetooth phone.
I turn on bluetooth on my phone and tell the TomTom to connect to the phone. The TomTom sees the iPhone and asks if I want to connect. After a few seconds it gives me a message that says, "The required features could not be found for this phone".
Has anyone gotten their iPhone to work with a TomTom One? What can you do once they're connected? I would assume you'd want to take contact info from the iPhone and transfer it to the gps.
I like my TomTom. It's a tool that does what it's supposed to do, but whenever I use it I can't help think of how much better it would be if Apple designed it.

I tried pairing my TomTom GO 720 with the iPhone - no go. Then I read the messages above, so I disabled wireless data on the TomTom - and tried again. TomTom saw my iPhone, went 40% into checking its features, and stopped there. At the same time, I did same thing on the iPhone - and it paired OK. So I re-enabled wireless data on TomTom, and tried again. This time - it paired! Then I got a message from TomTom saying my iPhone does not support wireless data transfer. Fine, I though - but then TomTom asked me if I wanted it to copy my contacts. And... it did that, too. So I am totally and completely baffled now - but paired with my TomTom, too. And it works just fine (as a hands free device, that is, but that's all I'm after at this stage).
(I only wonder what will happen it the car, cause as of now it sees my phone as 192.168.0.109 - but hopefully it'll see some Apple provided, default IP number instead.)

HT3624 I am in a campground and my wireless internet won't connect on my MacBook Pro. Help

I am in a campground and I can't get the wireless internet to work it worked before now it doesn't. I think
I did something and messed it up. I was in the network area of system profiler and it was on
air port and I hit the - at the bottom and it went away when I put it back it hasn't worked
since. Help!

I was in a hotel a few month a ago. The hotel also had a portal page you have to sign in. Of course the ATV didn't a web browser and could not sign in to the portal and connect to the Internet, so your iTunes didn't work. (But your ATV should be connected to the router at that point already, just the portal won't open the port to pass through your ATV's traffic)
So what I did was to use AirVideo app on my iPad and AirVideo server on my Mac. Selected the movie on my iPad using the AirVideo app and then selected my AirPlay device on my iPad to AppleTV. Because this setup didn't require iTunes, so there was no need for a live Internet connection, and just a connection to the hotel router was enough. It was very easy.
(Of course, you can subsititude the iPad with an iPhone here too)

My wireless keyboard will not connect to the Mac mini. I am unable to login to change settings. How can I bypass login?

my Mac mini is password protected and my wireless keyboard will not connect.

Troubleshooting wireless mouse and keyboard issues
OS X: Bluetooth devices become unresponsive

I need an ethernet cable connection to a non-wireless device that isn't near my current airport express. Can I buy an extra one to plug in near the non wireless device to receive the wireless data and put the signal out in ethernet form?

I need an ethernet cable connection to a non-wireless device that isn't near my current airport express. Can I buy an extra one to plug in near the non wireless device to receive the wireless data and put the signal out in ethernet form?

Yes, you can.
This is a special feature of the AirPort Express 802.11n. You will have to set it up "manually" to "enable Ethernet clients".
If your "main" AirPort Express is an 802.11n version, it is also possible to setup the second Express to "extend a wireless network" to provide additional wireless coverage in addtion to enabling the Ethernet port.
If you need the steps, post back to let us know what operating system you are using on the Mac or PC that will be used for the setup of the new AirPort Express.

Netgear WNDR3700, Tp-Link WPS510U, Epson Photo 1400 and PowerRIPX: wireless connection

Hi All
I need some advice regarding a wireless connection to my inkjet printer.
I have recently replaced my router with a Natgear WNDR3700 dual band device (2.4G and 5G). Connected and working wirelessly are my MacBook Pro, iPhone, Zeppelin Air, smart TV. Connected and working wired are my satellite modem, VoIP ’phones and laser printer.
However, I have an Epson Photo 1400 with a Tp-Link WPS510U which isn’t working. It worked with the old router.
Netgear’s Genie application shows the printer to be available under AirPrint.
The printer driver I use is PowerRIPX PostScript.
The TP-Link has the correct IP address from the previous configuration (192.168.1.10).
Printing shows the document processing in the print queue, but there is no flashing green LED on the front of the printer and no output results.
So … how do I actually get this to work? Advice gratefully received.
Cheers
Paul

I have OS 10.8.2 and use wireless at home just fine. When I visit a friend with only a cable modem internet my Mac Book Pro will not connect. What do I need to do?

I have OS 10.8.2 and use wireless at home just fine.
When I visit a friend with only a cable modem internet my Mac Book Pro will not connect.
I see that the Mac Book Pro is picking up the internet when I check the internet preference section but it will not open Safari.
What do I need to do connect via a cable modem?

You need to power off the modem for 15-30 seconds, then power back up and then connect. The modem is remembering the last connection (your friend).

I am trying to install software for iTwin Connect, but after downloading the dmg file and launching the program, I receive a message saying the file can't open and to check my internet connection. Any ideas?

I am trying to install software for iTwin Connect, but after downloading the dmg file and launching the program, I receive a message saying the file can't open and to check my internet connection. Any ideas?

Many Thanks, Kurt.
I knew I'd seen the solution you've provided somewhere - either in MacWorld or MacFormat - but couldn't remember the Gatekeeper bit!
I shall save it somewhere VERY safe now in case this happens again …
You have made an old man very happy and saved me from worrying that senile decay had suddenly set in. (I was 70 last week so you might understand the situation from that.)
Best wishes
OllyanDinah

I just upgraded to ITunes version 10.6.0.40 and now I am having trouble connecting to my Airport Express. I get error message 15000. I am connecting with an ethernet cable so it is not a wireless problem. Any ideas?

I just upgraded to iTunes version 10.6.0.40 and now I am having problems connecting to my Airport Express and I get an error message 15000. Does anyone know what that means? I am using an ethernet cable so it is not a wireless problem. Trying to find out if this is realated to the iTunes upgrade. Any ideas out there?

Sure...
See this Apple article for a Hard reset of a Factory reset.
http://support.apple.com/kb/HT3728

My wireless keyboard no longer connects with my iMac since changing the batteries. It now shows as not connected, not paired and not configured. A friend recently connected his iPad to the iMac and since then the problem started. Any ideas to resolve this

My wireless keyboard no longer connects with my iMac since changing the batteries. It now shows as not connected, not paired and not configured. A friend recently connected his iPad to the iMac and since then the problem started. Any ideas to resolve this?

a friend told me that he wants my os x cd for my macbook pro to upgrade his imac.
The discs that come with your Mac are "machine specfic" and cannot be used on another Mac.

I am having trouble transferring files from an old MacBook (2007) to a MacBook Air over a wireless network. The connection was interrupted and the time was over 24 hours. Is there a better way to do this? I'm using Migration assistant.

I am having trouble transferring files from an old MacBook (2007) to a MacBook Air over a wireless network. The connection was interrupted and the time was over 24 hours. Is there a better way to do this? I'm using Migration assistant. The lack of an ethernet port on MacBook air does not help.

William ..
Alternative data transfer methods suggested here > OS X: How to migrate data from another Mac using Mavericks

I have an Airport Extreme, 2 laptops with windows 7 and a wireless HP printer. I can connect the laptops to the printer. Any advise?

I have an Airport Extreme, 2 laptops with windows 7 and a wireless HP printer. I am not able to connect the laptops to the printer. Any advise?

The problem is not the router.. the issue is the vpn has put your computer in a different IP range with a different gateway. When you turn off the vpn the computer returns to local lan and can print.
Some vpn software allows you to set gateway to use local net instead of remote gateway or access to other webistes or local lan.
Read up the issue.
http://stevejenkins.com/blog/2010/01/using-the-local-default-gateway-with-a-wind ows-vpn-connection/
Cisco vpn client..
https://supportforums.cisco.com/thread/239113
I did not search much.. just grabbed the first article I could find that explains the issue.
The whole point of the vpn is whilst it is connected your computer is NOT part of the Local Lan .. it is part of the Remote LAN via the vpn tunnel.
It is also a security risk using split tunnelling so often it will not be allowed.
Plug the printer directly into the computer via usb or whatever.. Local connection will work.. not local lan.

I just purchased an Apple TV. I have a pc running windows 7. It is connected to a router and the router is connected to a wireless router. I connect my iPhone, iPad and apple tv to wireless network but do not know how to put the pc on the wifi network

I just purchased an Apple TV. I have a pc running windows 7. It is connected to a router and the router is connected to a wireless router. I connect my iPhone, iPad and apple tv to wireless network but do not know how to put the pc on the wifi network so the Apple TV can do home share.

I don't mean to be facetious but sometimes the simplest things are overlooked. To connect to your library you have to have the computer where the iTunes library is located running and with iTunes open. It also needs to be on the same network. My network is dual band and works with either stream but a friend of mine does not. He has to set the computer and the Apple TV to the same band. Hope this helps.

The HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini. I have to physically disconnect the HP and then reconnect for the Mac to find it. Turning off the wireless Epson doesn't work. All software is updated.

My HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini. I have to physically disconnect the HP and then reconnect for the Mac to find it. Turning off the wireless Epson doesn't resolve anything. All software/drivers have been updated.

My HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini. I have to physically disconnect the HP and then reconnect for the Mac to find it. Turning off the wireless Epson doesn't resolve anything. All software/drivers have been updated.

Is it possible to install a TomTom app in my iPad "only wifi" and use the GPS in my iPhone 5?

Hi.
Is it possible to install a TomTom app in my iPad "only wifi model" and use the GPS in my iPhone 5?
BR
Nike

Nope

E63 and TomTom Wireless GPS MkII receiver connecti...

Similar Messages

Maybe you are looking for