E63 calculator comma problem

My E63 calculator swtiches between comma and dot. It's not a big issue, but I would appreciate any help whatsoever.
Solved!
Go to Solution.

Yeah, seemingly the language was the issue. I am Romanian and therefore used Romanian as my language (both general and writing). Nowadays, I switched to English. As I switched back to Romanian, dot was disabled once more and comma stepped in.
I'll post later if anything changes, as not to tag this post SOLVED if it isn't. Thanks for the help.
Although it would be nice to have English as the language and comma as the separator. Note: Having Romanian as the display language and English as the writing language didn't change anything so I don't see how reversing them would work.

Similar Messages

Comma problem with global string variable

Hi,
I'm fiighting with comma problem for global string variable. I've on page string for example "7nndqrr52vzyb,0" and by dynamic column link I'm assigning this string to global variable. Then I'm trying to display value of that global variable on another page but I see only string till comma, nothings more. I'm not sure what I'm doing wrong because when I'm trying to assign that value normally by computation process as a constant value is fine and see on another page correct string. I'll be really glad for help.
Thanks
Cheers,
Mariusz

When it tries to display the string, it sees the comma and wants to believe the string is terminated. You could escape the , in the string or replace it with a different character..
See this link: http://download.oracle.com/docs/cd/E17556_01/doc/user.40/e15517/concept.htm#BEIGDEHF
Thank you,
Tony Miller
Webster, TX
If vegetable oil is made of vegetables, what is baby oil made of?
If this question is answered, please mark the thread as closed and assign points where earned..

NOkia E63 All Software Problems listed, Ignored by...

here are NOkia E63 All Software Problems listed.
-- Picture Editor:
You can Zoom, Rotate a Picture but E63 never allows to Save the edited Picture, Worst SOftware Engeering.
-- No Calendar Sync with Address Book Events
Add a Birday/Annivesary event along to a contact, you will never see the event entered to Calendar/neither gets a remainder alarm on that occassion.
Very Sad to say Nokia has very less knowledged engineers who are not even capable of giving a software which Rs 500 mobile gives with colors.
-- Memory Card COrrupted and needs a restart of MObile to recongise the Mem Card
3 to 4 times a day and every time when you switch off and switch on You need to re-insert the memory card(which is supplied along with MObile by Nokia)
-- Picture Viewer
Awesome, you cannot open pics with folder wise,
Open a Pic from folder, delete the that pic, you will be routed back to Home screen instead of folder.
What a Testing Engineered SOftware.
and after encryting memopry card, and after decrypting i am not able to see pics on pic viewers.
but can access to files directly going to Mem card folders.
ENcrypt and decrypt are juts for name sake, not for functioning and serving the need.
-- Contacts
Enter one or two char in search, Say
Ma
it lists out
Mahesh
Manikanth
Martin
Mariya
though i see the contact Mariya, i cannot scroll down to select that Mariya Contact
i should have to enter full name.
then why we need Search option, lets go scrolling down from begining.
-- Message Inbox
Wow, Interesting Area,
1. Just Say i received a message from Number 123456789, now go and save 123456789 as Balaji in Contact.
Now get back to your Inbox, Surprise, you never see 123456789 updated with COntact Name Balaji, it will stay as 123456789 only, even give a try of Swithc off and Switch on 100 times, its same.
its new nokia software getting back to 1950s.
2. Now, one more test:
   You have already saved a friend number 12345 as Balaji in contacts.
   you get a SMS from 12345, well the inbox now promptly shows message from Balaji, now go back to Contacts, and change the number 12345 to any number,
   so now Contact Balaji's number is changed but you will never see this reflected in inbox.
   you will be still shown as message from Balaji, though that number is not at all saved.
One more roboustness testing:
You delete the contact Balaji, still you see in Inbox SMS from Balaji.
-- Wi-Fi.
Even with dedicated Wirelss internet connection, E63 just detects the connection but when started browsing, i just get5 this.
"No Gateway Reply !"
you give a try for 1000 times you wont get internet brrowsing in E63,
i get heavy headache if i start thinking why i paid RS12000/- for Junk.
if i meet any of NOkia people at my office i will kick to them for sure.
Nokia should be Sued.
if i keep on digging the non-sense behavior of Nokia E63 i dont know, instead i can write a pretty good software.
Dear Nokia,
I need all this and every software problems to be fixed, else i will go to COnsumer COurt,
this is cheating All indian Customers, Taking RS 12000/- and not even providing a sofwtare which a RS 1000/- gives.
And if i wont get all this erros fixed by 15days, i will publish all this info at all leading weblinks, and will ask none to go for Nokia,
because Nokia has forgotten what is SOftware.
Regards,
Balaji M
EVen after Several Mails to [email protected] i got mail as "All the mobile phones do not support all the features. Further, we endeavour to address any concern or suggestions that may be raised by our customers. We thank you for your valuable feedback and have forwarded the same to the relevant department for their due consideration."
i really dont understand why Nokia Customer Care perdonals are always so dump like Nokia SOftware Engineers, i am asking for existing features not working properly but they comment saying "All the mobile phones do not support all the features"
Again they say, if any questions ask at Nokia !!
I am listing out the problems that your very high end Mobile Costing Rs. 12000/- INR which is failing to give even Rs 1000/- worth mobile.
This is all the questions I have, again why should I have to go and ask the same at Ask Nokia" at www.nokia.co.in/asknokia ?
once listed problems are answered again and again just for formalities they are asking ask question.
I want the Board or Directors and Senior responsible personals to attend to this, and get me bug free mobile for what i have paid RS12000/- else return our money, else i will soon file a Cheating case of not providing a said fetaures working phone by Nokia at COnsumer COurt, India.
Iam not the one facing this, just visit mouthshut.com, you will see people crying with erros on NOkia even after paying RS 30,000/- who's money is all this ?
I am awaiting for the response with bug fix by 24 hours.
and also i need my money back by 1 week.
Balaji M
Moderator note: Contact information removed - it is unwise to publish such information on a public forum.
Message Edited by michaels on 14-Oct-2009 10:59 AM

Nokia E63 has a name sake encryption and decryption. Once you encrypt and decrypt it is difficult to find any of your old saved files. Paradox is that the memory status will show a huge quantity of used space. But GOD only knows where the files are. Nokia support centres have no answer for this problem. I lost a large chunk of my pics n files. Shame of Nokia.

Master-Detail commit problem

I have master detail scenario. I have two forms. First one for the master and the second for the detail. I am first inserting the master data and then i navigate to the other form to insert the detail data. If i make commit from the second form it works just fine, but i need to go back(using JSF navigation) to the first form and commit from there. When I'm doing that i get the following error: JBO-27102: Attempt to access dead view row
I need solution to this problem
Thanks
Edited by: user2136329 on Dec 3, 2009 3:44 AM

JBO-27102: DeadViewRowAccessExceptionReason: Trying to access a ViewRow which is part of an obsolete/invalid collection. This could happen if a reference to the ViewRow is held by some business logic while the containing view object was removed.
Solution: Find the referenced ViewRow either by re-querying or using findByKey methods to get a valid reference to the ViewRow.
>
How are you creating your detail row - when you are navigating back are you doing a form submit to make sure that the data is submitted to view object..? If yes, try to get the handle to detail viewobject instance to check it holds new rows before commit..?
~Krithika

COMMIT problem in TopLink, Struts, JSP and ADF Databinding sample

In the sample Developing a J2EE Application using TopLink, Struts, JSP and ADF Databinding,
I followed all the steps to build a department browse page and a edit page.
But when I get to Step number 23 in "Create a JSP to Edit Departments" I have a problem with the commit.
Only after I make a change in the form and click the sumbit button, the commit and rollback buttons become active. And After I click the commit button the data gets commited to the database but the page inofmation changes to the very first department record, not the current one.
How do I make those buttons active with out the extra click on the submit?
After I click the commit button, how do I keep the current data on the screen?
Thanks for you help.

Shay,
Thanks for the reply.
For #1, I was able to do the following and get away with not having to press submit first. I just removed the bindings for disable. I hope that does not cause any problems?
<input type="submit" name="event_Commit" value="Commit" />
<input type="submit" name="event_Rollback" value="Rollback" />
For #2, How I add an action on an HTML button? My UIModel.xml for the edit department page currently has two actions on it. Commit and RollBack. Is it linked through the "name" attribute of the input tag?

Oracle Forms 6i - mySQL (Commit Problem)

Hi,
i'm using Oracle Forms Builder 6i to connect to mySQL 3.23.49 via
Oracle Open Client Adapter for ODBC 6.0.5.35.0
Now I have a problem of controlling which form to commit if more than one form are opened.
E.g. I need to open 2 forms (eg. A, B) and only want to commit the changes made on Form A
1.
I open the forms using the follows (i can't use OPEN_FORM('A', SESSION); since mySQL doesn't support)
OPEN_FORM('A');
OPEN_FORM('B');
2.
then I changed both forms
Now the :SYSTEM.FORM_STATUS, :SYSTEM.RECORD_STATUS, :SYSTEM.BLOCK_STATUS are 'CHANGED'
3.
I then press my custom save button on form A (triggers KEY-COMMIT). Inside KEY-COMMIT, it calls COMMIT_FORM, then triggers
ON-COMMIT eventually. In ON-COMMIT, i use the built-in COMMIT to commit the changes.
Then I found that :SYSTEM.FORM_STATUS, :SYSTEM.RECORD_STATUS, :SYSTEM.BLOCK_STATUS are 'QUERY' which is normal. However both
forms are committed.
4.
So I fixed it by: In ON-COMMIT, add RAISE FORM_TRIGGER_FAILURE; after COMMIT. Although it stops committing changes on another
form. But :SYSTEM.FORM_STATUS, :SYSTEM.RECORD_STATUS, :SYSTEM.BLOCK_STATUS are still 'CHANGED'. Then I do a EXECUTE_QUERY
after COMMIT_FORM to change back :SYSTEM.FORM_STATUS, etc to 'QUERY'
5.
It works. Only Form A is committed. However when Form A has a lot of records (eg. >500), it affects performance.
Does anyone know how to solve this problem?
Any help would be greatly appreciated
Peter

The question is not how you disable a key, it might be more how to disable a functionality. What functionality do you want to disable? By default F5 maps to the KEY-MENU-trigger, if thats the function you want to disable, write a NULL; in the KEY-MENU-trigger.

Oracle distrebuted document capture commit problem

hi,i am working with ODDC v10.1.3.5 using (UCM 11g commit driver) and every thing is going well except one problem that is when i commit to ucm there is a field called(subject) is not commited to UCM even it is maped through the commit driver .
at the document title field(at Commit Driver Configurations) ,i use it as a compination of multible fields (Name-Subject-Date) ,UCM can see the value of (Subject) Field at this position but at the (subject) field (on UCM) it is empty .
i dont know what is the reason for this issue ,is it a problem whith the commit driver ?
any help will be appreciated .
Regards
H.Sweiss

Thanks Jiri,
I have started with the mandatory metadata fields only. I have resolved the previous problem.
It was because Client Access folder was not properly set.So the .pak files was still residing in the client access folder.
But now all batches are present in the Batches folder and the logs says
eg: 07/13/10 04:48:10 PM 19360358_19360532 extracted into C:\Program Files\Oracle\Document Capture\WebPages\ClientAccess\19360358_19360532.
07/13/10 04:48:10 PM Start processing DS19360358. File Cabinet: captureDocuments; Create User: TEST; Modify User: TEST; Computer Name: MUKESHLT1\MUKESHLT1; Create Date: 7/13/2010 4:45:57 PM; Modify Date: 7/13/2010 4:48:52 PM.
07/13/10 04:48:10 PM Client Version Number: 10.1350.26.
07/13/10 04:48:11 PM DS00000000000023 (ID: 24) created in captureDocuments with 1 pages from DS19360358.
07/13/10 04:48:11 PM DS00000000000023 (ID: 24) is committed, number of documents: 1, total page(s) committed 1.
07/13/10 04:48:11 PM Post processing batch DS19360358. File Cabinet: captureDocuments; Batch ID: 24; Create User: TEST; Modify User: TEST; Computer Name: MUKESHLT1\MUKESHLT1; Create Date: 7/13/2010 4:45:57 PM; Modify Date: 7/13/2010 4:48:52 PM.
07/13/10 04:48:11 PM 19360358_19360532 deleted.
07/13/10 04:48:11 PM
But it is still not sending to UCM.
Is there any setup to commit these batches?

E63 Lock Code Problem After Update

I recently checked for a firmware update for my E63. I got excited when i found out that there was an availabla one, the 510 .21 .010 and I immediately started the update process. Everything went ok but when i switched On the phone it asked me for the lock code after 3 or 4 seconds. I tried the default one , 12345 but it showed a code error message. I can't do excatly nothing but the weird thing is that buttons Calendar,Contacts and Mailbox work but i still can't do nothing else.The Home button does not work. It doesn't seem a normal behaviour.Could it be a bug? I read a lot of posts about this problem so this means I'm not the only one having this problem. Please help me. I really need my E63 back as it is my do-everything tool. Maybe a new firmware with this bug fixed would be best.
Thank You in advance

hello, you will need to contact your nearest Nokia Care with proof of purchase/ownership, for them to reset your security code.

EXCEL CALCULATION IN CALCULATED COLUMN PROBLEM

Hello,
Please someone kindly help out with this calculation problem. I have an Excel file with this calculation:
=IF(E10<D10,E10/D10,E10/E10)
I am trying to translate this into a calculated column in a list and I can't seem to succeed with it. Can anyone try this out and be my hero.
You've only got ONE LIFE; HELP as many people as you can, and ENJOY IT while it lasts. People are in the centre of our happiness, even God understands that.

Hello Hemendra,
Voila! here it is finally.
=IF([SCORE-FM1]/[TARGET-FM1]*100>=100,"100",[SCORE-FM1]/[TARGET-FM1]*100)
Frankly I couldn't believe it! It does fulfill my requirement. Thanks a lot for pointing in the right direction.
Let me explain what this does.
whenever the target is higher than the score (and inversely whenever the score is lower than the target)
(still saying one and the same thing), we will always get a figure less than 100% (say anything between 0% - 99%) and this perfectly OK. That is what is happening in the above image where 89% and 33% is %Achieved.
Also, whenever the score is the same with the target, the result will be 100%, that is what happened
to the last calculation having "3" and "3".
But whenever the score is higher than the target, the result will be over 100% (say 120%, 180%, 350%,
etc). I want it such that whenever this is the case, the logic should trim it down to 100%. This is what the below calculation does:
=IF([SCORE-FM1]/[TARGET-FM1]*100>=100,"100",[SCORE-FM1]/[TARGET-FM1]*100)
Thanks Hemendra for being online. And for Sylvester Oriabor and Chinenye Nwanna who are offline who helped to drive this to conclusion, especially Chinenye Nwanna. Thank you all.
You've only got ONE LIFE; HELP as many people as you can, and ENJOY IT while it lasts. People are in the centre of our happiness, even God understands that.

Shipment cost calculation - configuration problem

hello all
we are implementing the shipment cost calculation system and so far configured only 1 service agent .
the problem regarding scenarios that the shipment executed by service agents that is not configured in
the system but the invoicing party is the one ( SA) that we configured .
( the SA that is configured in the system is charging us for the shipments of the
SA that is not configured. )
how can i get the shipment cost document to open for the invoicing party ( the one that we configured )
but still leave the shipment under the origin service agent ( the one that isn't configured ) ?
Regards ,
ASA .

Hi ,
sorry, i wasn't precise :
i need to open a service entry whose based on po in order to forward to financial accounting .
( its a separate po that isn't part of the inbound or outbound process and i open it for SA x )
Y and X are differnt transportation companys but i have some cases that SA x is charging me
for the shipment of SA y.
the transportaion agent in VT01N is SA y and there for the shipment cost document opens for SA y and
looks for po for SA y .
i have to direct the system ( by some user exit / badi ) to seek for the po of SA x ( the one whose
charging me for the shipment ) .
hope this help explain my problem ,
Regards ,
ASA
Edited by: ASA MOKED on Apr 12, 2009 5:47 AM

Dot - Comma problem in WS_download --

I have 3 fields in the internal table.
I want to download all those fields in to excel sheet based on the selection screen either dot or comma. I am using ws_download. I want to display all records in left side.
I have declared all 3 fields as characters.
Data: a, b,c type c.
If you select dot all the columns are displaying right side.(perfect)
Now if I select comma all the columns are displaying in right side.
Now I want to display all the records are right side even if its comma or dot.
Pl send me the sample code.

HI!
It's not exactly an ABAP problem, but maybe an excel problem.
In ABAP you can remove all dots from a string with the following command:
REPLACE ALL OCCURRENCES OF '.' WITH '' IN column1.
In excel you can declare your cells as a text, or as a number. As text it is always aligned to the cell's left side, as a number it is aligned to the right side.
Select a few cells, then right click on them and choose cell properties.
The algnment of the texts, you can overrule with the manual align buttons (left, right, center...)
Regards
Tamá

Commit Problems

Hi,
I am facing the following problem.
I have a database table with two constraints.
One constraint is the primary key and the other constraint is a unique value (username) in the table.
I created my workspace and project in JDeveloper 10.1.3.1.0.3984. I am using ADF Business Components and i created my entity and then created a view based on that entity.
I then created a main page with the view as an ADF Table and from this main page, i included an edit button to go to the edit page to edit the selected record.
So far everything is running perfect.
On my edit page, i have a commandButton that commits changes to the database (i just dragged the commit button and set the disabled property to false).
When i try to enter a username that already exists, i get two errors:
1. JBO-26048: Constraint "SEC_USER_UNNIQUE_USERNAME" violated during post operation:"Update" using SQL Statement "UPDATE JAAS_USERS JaasUsers SET USERNAME=? WHERE USERID=?".
2. ORA-00001: unique constraint (KANDY.SEC_USER_UNNIQUE_USERNAME) violated
This is ok. However, when i go back to my main page i see that my record changed to the existing duplicate value that i have entered. This is not howeverd saved in the database, however it is being displayed on my main page.
When i close my session and open my page again, i can see that the changes have not been committed.
This is quite confusing for the end user. I cannot first display error that there is a violation, then "commit temporarily the changes", and the if i close the session and open the page again to be ok.
Can someone please help how can i overcome this.
I tried overriding the method postChanges on the entity but i get again some other errors: Here is my overriden method.
public void postChanges(TransactionEvent transactionEvent) {
try{
super.postChanges(transactionEvent);
catch (DMLConstraintException ex) {
DBTransaction currentTrans = getDBTransaction();
currentTrans.rollback();
ex.setExceptions(null);
throw ex;
And the last i would like to ask is that i declared my commit button to an action(Navigation case), to just go to the main page after pressing save. When i hit save, what i would like to do is that if there are error messages to stay on the edit page and only go to the main page if commit is successfull.
I hope someone can help me with my issues
Thank you
Antonis

Hi. Please start a new thread for a new question in the future. Thanks.
You are hitting bug# 5872826 where the Business Components: Options panel adds the incorrect message bundle class name to the JPX file.
For example, imagine you had done the following:
1. Default an EO for the DEPT table in a new project
2. Visit the project properties dialog, and select the
"Business Components" > "Options" panel
3. Click (New...) to define a new custom message bundle
4. Enter a package name of "some.pack.name" and class of "MessageBundle1"
and click (OK)
The bug is that JDeveloper saves the incorrect fully-qualified message bundle class
name just created. Instead of "some.pack.name.MessageBundle1" it
has only saved "MessageBundle1" so the message bundle will not be seen
at runtime.
The workaround, after following the testcase steps above, is to
click the (Remove) button to remove the incorret message bundle class
entry, then click (Add) and use the class picker to add the
"some.pack.name.MessageBundle1" class name. Doing it this way the
class name is added correctly

Pre-calculated webtemplate problem

Hi All,
I've pre-calculated a webtemplate and am able to see the html pages containing data in Reporting agent by choosing the option 'Document Overview'. But when i execute the webtemplate in the browser, i get the following error
"No precalculated data found for data provider DATAPROVIDER_1".
The job for pre-calculation has beensuccessful. The URL looks something like this:-
<b><i>http://ipaddress:port/sap/bw/BEx?sap-language=EN&bsplanguage=EN&CMD=LDOC&TEMPLATE_ID=WEBTEMPLATE_NAME&DATA_MODE=STORED</i></b>
Could some one please help me out with this problem ? I want to use the pre-calculated webtemplate from the browser.
Best Regards,
Sanjay

Hi,
I am having the same problem...
Any help would be appreciated...
Thanks

[SOLVED] urxvt and Git/SVN commit problem

I have a problem where SVN and Git cant see that the EDITOR variable is set on my system when I go to make a commit, they both error out because the EDITOR variable (as well as other variables are blank). This is the error that I get from SVN:
┌─(vendion@Tyre Fri, 02 Sep 11)───────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────(08:48)──┘
└─(/srv/http/juice38)─> sudo svn ci
svn: Commit failed (details follow):
svn: Could not use external editor to fetch log message; consider setting the $SVN_EDITOR environment variable or using the --message (-m) or --file (-F) options
svn: None of the environment variables SVN_EDITOR, VISUAL or EDITOR are set, and no 'editor-cmd' run-time configuration option was found
┌─(vendion@Tyre Fri, 02 Sep 11)───────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────(08:48)──┘
└─(/srv/http/juice38)─> echo $EDITOR
vim
Git acts the same way but with its own error message (sorry don't have an example of this currently), is there a way to fix this so that Git and SVN will see that I do have an EDITOR set and use it with out having to change terminals (works fine in xterm...)
Last edited by vendion (2011-09-02 16:08:48)

Sorry over looked that, when I run sudo to check the EDITOR variable it also has vim set
┌─(vendion@Tyre Fri, 02 Sep 11)───────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────(09:42)──┘
└─(/home/vendion/Projects/TickIt)─> sudo echo $EDITOR
Password:
vim

E63 and VOIP problem, pls help

Hi Guys
I got Nokia e63 and have successfully configured local VOIP number but it works when I use the " mobile internet" or " my service provider internet " as my default access point not my home wireless connection.
When I set my home wireless connection as default access point inside sip settings then I can make calls but cannot receive , I thought my netgear router or firewall causing problem , i configured e71 ( my friend's fone) and it work both ways without any problem.
when i change the access point to other than home wireless , no issues on e63 , incoming and outgoing work like a charm.
any known issues ? please advise bcoz its consumin my mobile internet
many thanks

I have a similar problem, I have my E63 for five months now, For first 2 months i was able to make voip calls no problem and was very happy.
I was using Mo-Call and Skype. First of all I noticed a degrading of my Mo-Call where I would have to dial several times to get through. then I was unable to connect at all. If I dial a number now I can sometimes hear a dial tone, the phone at the other end rings and picks up. I cant hear them and they cant hear me. annoying thing is that I get billed for the call by my voip service providers.
I soldiered on with skype which has now downgraded to the point that I can only communicate with instant messaging although it still rings me and I can ring out.
I have checked and my nokia software is up to date. needless to say I checked with several known good wi-fi points and no luck. I have had friends check thier smart phones on my wi-fi and all had no problems.
Mo-Call worked hard to try to identify the problem but my account with them works if I try it on other phones.
I find Nokia Customer Care website difficult to work with. I have been directed to thier local agent here in Dublin (Fonemenders) whos phone leads to an answering machine. a message was left and they do not respond.
Any help greatly appreciated.

E63 calculator comma problem

Similar Messages

Maybe you are looking for