E63 camera not working. Just says "General Feature...

Hi, my e63 camera does not work anymore. It simply says General feature not supported and exits. I have tried the other things suggested on this forum like firmware update and 3 finger hard reset and they didnt help. Is there anything else i can do?

Backup your phone with pcsuites then format it. That is an s60 series phone & codes are available for formatting.
Codes are here :/discussions/board/message?board.id=hardware&thread.id=6601
Message Edited by android on 10-May-2008 02:52 PM
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

Similar Messages

  • E63 CAMERA NOT WORKING

    kindly help me fixing my camera of nokia E63 
    it opens but the screen doesn't show ne thing
    n after that the piece hangs n if i try switching off my cell it gets off but the screen light n pads light remains on then forcibly i have to remove my battery
    n this always happens i had hard reseted my mobile but still the same thing is goinn on
    plz gimme some suggestions on how i should fix this
    waiting for the reply
    THANX

    hi there mate,
    have you checked if there are any firmware updates available for your device via Nokia Suite? if there are any, please update to the latest version offered. If there isn't any, try re-installing your current firmware thru Nokia Suite and if that isn't working, to perform a three finger hard reset.
    Failing that, you will need to take your phone to your local Nokia Care point for them to inspect: http://nokia.com/support

  • My camera not working.i can't open photo booth it says that there is no connected camera

    my camera not working.i can't open photo booth it says that there is no connected camera

    Use the suggestions here:  http://support.apple.com/kb/HT2090
    The SMC reset often fixes your problem.  Be sure you follow the instructions for your particular Mac model.

  • Camera not work ipad 4generation before ios8 update

    Camera not work ipad 4generation before ios8 update
    PLease help

    Hi Hellside,
    Welcome to Apple Support Communities.
    It sounds like there is an issue with the camera on your iPad. The article linked below has a lot of great troubleshooting suggestions for a similar issue on an iPhone but the suggestions should resolve the issue with your iPad too.
    iPhone: Hardware troubleshooting
    Camera isn't functioning or has undesired image quality
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try to remain steady while focusing:
    Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
    Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
    Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
    Note: Video-recording features are not available on original iPhone or iPhone 3G.
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    Issue not resolved
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    I hope this helps.
    -Jason

  • PLSSS HELPPPP!!!! BB10 CAMERA NOT WORKING!!!!

    Just Bought a Blackberry Z10, and Update the firmware to 10.0.10.82, latest version pushed by Maxis, then the second day, my Camera can't work. First you launch it, the screen is blank but other key is working, it's like the lens is closed. Then when you click on any function, it jammed. If you restart the camera, it show:"Camera can not be started"!! Why? Is that really caused by external memory card(mine using kingston 8GB)? or because of the update? or because of the application Measure Treasure (which using camera function)?
    What's the suitable Memory card for Blackberry Z10?
    Should I upgrade the firmware? ( if not, I cant install Whatsapp)
    Please Helppppp

    Duplicate:
    http://supportforums.blackberry.com/t5/General-BlackBerry-10-Smartphone/BB10-Camera-not-working/m-p/...
    Please post there, not here.
    Thanks!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • My daughter's ipod is not working and says it needs to be plugged into a computer. Can she sync to someone elses mac?

    My daughter is away at camp and ipod is not working and says it needs to be connected to itunes.  She does not have her laptop with her. Can she sync to her itunes on someone else's mac?

    Yes, when she plugs it in to another person's mac, tell it transfer purchases, then authorize the computer by going to store, and click authroize computer. If the iPod is in recovery mode
    Then I don't think she can have her music apps etc. on there after she plugs it into the computer. If it just needs a charge
    When iTunes opens on the computer, quit it, and do not let the iPod sync with the computer, just answer no or ignore to any questions asking if you want to sync.

  • Isight camera not working after the last update

    After reboot of the last OS update
    Isight camera not working...
    i've tried photobooth, ichat, skype and it doesn't show up anywhere. in fact, when i go to system profiler, it doesn't show isight under USB connections at all.
    just to give you a recap of what i've tried so far:
    * restarting (obviously)
    * resetting PRAM/SMC (by booting it the way it was specified in the isight troubleshooting thing)
    * just shutting down my computer and taking the battery out for several hours
    any Help pls
    because i mast to use it as soon as possible in a conference

    *A few suggestions.........*
    Try running repair permissions from your HD and afterwards run +repair disk+ from your software install DVD.
    my isight camera is not working-not recognized with photo booth or ichat
    To fix your iSight, shut down computer. Reboot in safe mode (press power button and then hold shift key down). After computer boots, restart again. Hopefully, your iSight will start working again.

  • I cant get my camera to work it says its on but has no feedback, any ideas?

    i cant get my camera to work it says its on but has no feedback, any ideas?

    Here are my best suggestions for your camera problem:
    • If Apple's http://support.apple.com/kb/HT2090
       suggestions do not help you, (the "reset" suggested there
       often restores normal function,) continue with the following.
    • Use your Mac's Disk Utility to repair permissions and then
       download and apply the latest Combo Update for your Mac OS.
       If you are using OS X 10.7 or later, reinstall OS X.
    • Repair permissions again immediately following the system restart
       that completes the Combo update or reinstall.
    Properly applying the Combo version of updates can sometimes correct software problems, but, if your trouble is caused by a hardware problem, there are no user serviceable parts of the camera.  For hardware help, contact Apple or an Apple-Authorized Service Provider for service.
    (Over time, Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD."  Regardless of the name of your Mac's built-in camera, the same info and troubleshooting applies.)
       Unless you have a current backup, make one now.
      Then use the final "Troubleshooting" suggestion:
    "... contact Apple or an Apple-Authorized Service Provider for service."

  • HP Mini 110-3700 built-in camera not working

    I just bought my HP Mini 110-3700 (LV831PA#UUF) last january. I just tried using the HP camera twice to check if the image it captures is clear. Yesterday, i will use the camera for a video chat but the messenger said "Cannot detech the camera/ device is not connected).When I had clicked the link for the HP Camera it had open but the light indicator didn't have any light and the camera isn't working.
    I already tried restoring the HP mini to factory settings but after that, the camera isn't working still. What should I do? Need help ASAP.
    Thank you!

    bamba-ista wrote: built-in camera not working properly. what do i need to do?
    How to Troubleshoot iSight (also works with FaceTime and FaceTime HD cameras.)

  • Camera not working on Lumia 535.

    Camera not working lumia535
    Moderator's note: The subject was edited. A new thread was created.

    Hi, sanaayesha. Welcome to Microsoft Mobile Community. We'd love to know more about your concern. When you say camera isn't working, does it mean it's inaccessible, not taking sharp images, etc.? Does this happen to both main and secondary camera? Are you getting this issue regardless of the lens you're using? You can try checking the workarounds given on this link to further isolate the issue: My camera is not working correctly. The content of this link is applicable regardless of your location. Hope to hear from you the soonest.

  • Old macbook pro3,1 (2.4 GHz Intel Core Duo) camera not working with Mavericks

    I have an old macbook pro3,1 (2.4 GHz Intel Core Duo, I think 2007), builtin camera not working and I think it is related to mavericks update.
    Anyone had the same problem, and if yes what is the solusion?

    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
         computer and after the chime press and hold down the OPTION key until the boot manager
         screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
         Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
    4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

  • Macbook pro camera not working -- very bad support

    I have a macbook pro bought around October 2010. It has 3 years international warranty.
    Few months back when I wanted to use skype, I figured out that the camera is not working. Took it to Apple care centre in Bangalore.
    They found the camara to be defective. From their notes
    " Reset SMC and PRAM. No go. Tried with known good OS. No go. Found camera not detected in system profiler. Checked with known good display. Camera working. Denied coverage as dent on the display clamshell"
    Chatted with the relationship officer Joana,
    1. I fail to understand that replacing the camera requires relplacing the whole display
    2. Small scrach (can send the picture to you) on the outer cover of teh display is not the root cause of the camera not working
    3. Display is working perfectly fine. Only camera not working
    The relationship officers are such dumb and techically challenged people, that they fail to understand the real issue and instead just try to console you.
    If camera is not working due to a defect, it needs to be replaced in warranty, if Apple's design dictates camera replacemnt to the whole display replacement, so be it.
    Due to my feedback, some of my colleges (10+ guys) took Macbook pro. Extreamely dis-satisfied with the support cell and their techical abilities. Did not expect this from Apple. Will not take any Apple product and will not recommend anyone. Thinkpad rocks!!

    read this: http://support.apple.com/kb/ht2090

  • Help front camera not working on my sons iPod touch 5g

    Help front camera not working on my sons iPod touch 5g

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Front camera not working

    Hi, I was wondering if anyone else has had the same problem as myself in regards to the front camera not working. All I seem to get is a black screen! I'm not sure if I need to activate it somehow or it's just not working? Thanks Ross

    UPDATE:  After the intial Factory Data Reset, the camera work fine for one day.  Now it's back to the same blank screen in the front camera.  Also now my video camera isn't working either.  I get an error msg "Recording in progress in another app. Cannot record".  I know some folks were having issues with the "OK Google" app.  I checked mine and all is unchecked.   Spent most of the day talking with Sony and Verizon and neither was able to help me other than Verizon offered a refurbed phone.  No thank you, my phone is new.  **bleep** Sony?  If anyone can help, it would be greatly appreciated.

  • Why is my adobe photoshop elements 12 not working. it says initializing and then it says there is an error and closes itself

    why is my adobe photoshop elements 12 not working. it says initializing then error and shuts itself down.

    Three things you can try:
    1. Clean the superdrive with a proprietory CD/DVD lens cleaner that uses tiny brushes.
    2. Perform an SMC reset:
    Resetting the SMC (System Management Controller) on Intel-based Macs:
    http://support.apple.com/kb/ht3964  and
    http://support.apple.com/kb/HT1237?viewlocale=en_US
    Resetting your Mac's PRAM and NVRAM:
    http://support.apple.com/kb/ht1379
    If you are using a Wireless Keyboard:
    http://support.apple.com/kb/TS3273
    3. Try the free DVD player VLC:
    http://www.videolan.org/vlc/
    which performs better than the built-in DVD Player.

Maybe you are looking for

  • How to Insert more than one record at a time- with fixed set of values in one field

    Can someone guide as to how to insert multiple records at a time using ASP VBScript in Dreamweaver CS4 or ADDT. If someone can guide then the exact problem is given below. I have a MS access database with one table. The table has three fields. The fi

  • My memory card is not showing up on the home screen when i plug it in but it shows the computer found it

    my memory card is not showing up on the home screen when i plug it in but it shows the computer found it in system preferences. when i plugged these into a imac back in school it showed up how come its not showing up on my less then 24hr old mac. sor

  • Business logic locks and CMP.

    I'm trying to implement the following: If a raw in the database (a CMP bean instance) was changed by a user then this raw is "locked" for all other users (write lock) until the user decides to release the lock. The database raw has three fields: ID,

  • Adding playlists

    Why can't I add playlists to my iPod? I can add songs to my iPod but not playlists... Help please.

  • Problem with charts in VC

    Hi All,      I am having a problem displaying data in charts. The process flow in my VC application is that user selects  a location from the drop down  then we call a model and display a table will all the equipments and their count and the correspo