E63 doesn't detect my Netgear Router (wgr614 v6)

E63 does not detect my netgear router (wgr614 v6). My T-Mobile SDA and T-Mobile Shadow, can detect it easily and also connect successfully.
Here are the settings I have on router:
Security: WEP
Auth: Automatic
Encrypt: 64 bit
Channel: 6
Mode: g and b
All my laptops also connect through this router, but E63 cant even detect it.. is there something wrong..? My router broadcasts, I mean it is not hidden.. any help/suggestion..?

I had a similar experience a few years ago with an N80. In that instance the problem was resolved when I changed the router setting from b and g to g only.
You should also try updating the firmware on the router as there have been problems connecting to Netgear routers which were resolved with router firmware updates.

Similar Messages

  • Netgear Router attaching to Time Capsule

    Hi and Help
    I will tell you what i am after
    I have a Virgin Broadband Internet connection with Time Capsule attached running my wireless network.
    My son has an Xbox in his room, with no Wireless card attached.
    I have a spare Netgear Router WGR614 v9, what i had in mind was to Somehow attach the netgear router wirelessly to timecapsule and plug my boys Xbox into it so he can get internet etc in his room
    Is this possible to start with, and if so how would i go about doing it
    Any help is very much appreciated
    Cheers Hutchy
    www.thickskinnedband.com

    In order to accomplish your goal, a Wireless Distribution System (WDS) would need to be established between the Time Capsule (TC) and the Netgear router. There are an extremely limited number of non-Apple routers that are WDS-compatible with the AirPorts or TCs ... I don't remember if your particular Netgear is one of them.
    Even if it is, the number one drawback of a WDS is that it will effectively reduce the available bandwidth of your TC's wireless network in half ... AND only operate in the 802.11g mode.
    To see if your Netgear is compatible, I would suggest doing an Internet search using the terms: AirPort Netgear WDS, to see if anyone has had success doing so.
    You do have at least two other options: 1) Connect the Netgear to the TC by Ethernet, or 2) Invest in a pair of Powerline adapters. These devices take advantage of your home's electrical circuit to create a pseudo Ethernet circuit. An adapter would be placed at both the TC's and Netgear's locations to "tie" them together by "Ethernet."

  • Yoga 10 not detecting ASUS wireless router

    Hello,
    I had recently purchased a yoga 10 tablet and it worked fine with the wireless router(ASUS RT-N13U).
    Suddenly today it doesn't detect the wireless router anymore. It does show other wireless networks in our apartment but not ours.
    Any help on this, will a factory reset help?
    Thanks,
    Jafar

    Same problem here on yoga 8, wireless routers with same SSID and password in different locations will suddenly disconnect and appear out of range. Most times I have to forget the ssid, turn off Wlan, reboot the router then switch on wlan and set up the connection again. This is not a minor glitch and does not happen on any of my other android devices, I was hoping the 4.4.2-01-021 build would fix this but no such luck. I really like the yoga 8 design but along with other stupid basic problems I.e.google maps I'm begining to think I've brought a polished turd.

  • My router RV180 doesn't detect my dsl gateway

    I just bougth a RV router but when i logon to the interface to configure it the router doesn't detect internet connection, i connected the ethernet cable port 1 from dsl to the WAN port at the RV180, but doesn't detetct the gateway, need i a cross cable? Because i can logon to the configuration wizard but it seems the router cannot detect the dsl internet connection.

    Hello,
    Usually a DSL connection will require that the modem be put into bridged mode, and then our device is configured as PPPoE.  To configure the modem you would need to speak with the ISP.  Some of them call this IP passthrough, one-to-one NAT, or just bridged mode.  You may have to ask for a supervisor before they will do this for you.
    You will also need to get your PPPoE credentials from your provider.  Then you log into the admin page on the RV180, go to Networking >> WAN (Internet) >> PPPoE Profiles.  Click on Add and enter the information from the provider.  Then switch to the IPv4 WAN (Internet) page and change the connection type to PPPoE and select the profile you just created from the drop down menu.
    While you are there you may also want to change your MTU from default to 1472, most DSL connections require this smaller MTU size to work properly.
    If you do have any issues with that your new router does come with 1 year of technical support, so you can give us a call and we can help get you setup as well. 
    Cisco Small Business Support Center Contact Numbers
    Please note you would still need to speak with the provider first to get the modem bridged and obtain the PPPoE credentials.
    Hope that helps.
    Thank you for choosing Cisco,
    Christopher Ebert
    Network Support Engineer - Cisco Small Business Support Center
    *Please mark/rate helpful posts*

  • I need to connect an Airport Express to an exisitng Wi-Fi Netgear Router. 1) My PC do not detect the Airport Express, 2) AE is flashing amber all the time... Please if someone can help?

    I need to connect an Airport Express to an exisitng Wi-Fi Netgear Router. 1) My PC do not detect the Airport Express, 2) AE is flashing amber all the time... Please if someone can help?

    Before I bought it I did the same question at the Apple Store, and they told me "You can extend your existing Wi-Fi Signal with Airport Express wireless...
    You cannot extend wireless from any brand except another apple router.. the store might have assumed you were using an apple main router. Most people who buy express buy them to extend an extreme or time capsule.
    You are correct .. in the setup documents it does say 5.6.1 is adequate to do the setup.. my bad.. !!

  • Unable to connect to netgear router and internet

    I've installed Solaris 10 1/06 (x86) on a system running an intel mainboard model D865PERL. This has a built in ethernet controller ( Intel 82547EI gigabit lan controller) and the mainboard appears on the bigadmin hcl as being supported. The OS recognizes the built-in NIC as e1000g0 but during initial installation it attempts to configure e1000g0 first thing then responds with "skipped interface e1000g0" then proceeds with the installation.
    I choose Networked and run through the installation (or following a sys-unconfig) selecting to enable DHCP but it returns "Could not contact a dhcp server on the network interface e1000g0." I then have to set it up staticly to resume the configurator. I specify the e1000g0's ip address as 192.168.0.5 with a subnet mask of 255.255.255.0. I choose not to enable IPv6 (ive tried it with IPv6 enabled) and no Kerberos. I attempt to specify DNS for name service and use my internet providers domain name (both the name and the resolved ip address associated with it) with the two DNS server ip addresses resolved by the WAN setup on the router (Netgear FR328S), selecting no search domains. But it is unable to locate my hostname on the provided DNS's i entered. dunno why it would say that, it really doesn't matter does it? Anyway, I specify no name service to proceed. i choose no to the question in regards to overriding the system's default NFS version 4 domain name to continue.
    It knows it has a cable connection but I'm unable to see the router, even though ive specified 192.168.0.1 as the default route (ive also tried setting it to detect the default route on reboot but it fails). The router doesn't see the NIC as a connected device either (im setting here on another computer running xp :() Ive tried disabling the DHCP server feature on the router and I still cant see it. Ive tried setting the NIC's ip address and MAC address as reserved in the LAN setup on the router (this works for my winXP drive where I need a static IP address and also have access to the internet). I've tried leaving the reserved IP address assignment (attached to the NIC's mac address and host name that i specified) with DHCP enabled but I'm still unable to resolve an IP address from the dhcp server. I made sure the router had the latest firmware and went through the configuration with a fine toothed comb, so to speak. nothing seems to work.
    I tried to connect directly to the internet device, removing the router and it still fails to resolve an ip address via dhcp. what am i missing here? Ive run through this multiple times now and im at a loss. Ive also referenced sun's System Administration Guide: IP Service to try to resolve the issue but im now all I'm doing is going in circles.
    # ifconfig -a
    lo0: flags=2001000849<UP, LOOPBACK, RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
    inet 127.0.0.1 netmask ff000000
    e1000g0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
    inet 192.168.0.5 netmask ffffff00 broadcast 192.168.0.255
    ether 00:13:20:47:6c:48
    # netstat -rn
    Routing Table: IPv4
    Destination Gateway Flags Ref Use Interfacd
    192.168.0.0 192.168.0.5 U 1 0 e1000g0
    224.0.0.0 192.168.0.5 U 1 0 e1000g0
    default 192.168.0.1 UG 1 0
    127.0.0.1 127.0.0.1 UH 4 85 lo0
    # prtconf -pv
    Node 0x000019
    compatible: 'pci8086,1019.8086.301f.0'.....etc
    model: 'Ethernet controller'
    subsystem-vendor-id: 00008086
    subsystem-id: 0000301f
    vendor-id: 00008086
    device-id: 00001019
    name: 'pci8086,301f'

    Couple of suggestions:
    Work first on seeing the router, using a static IP and pings.
    Forget about DNS, DHCP, etc for now. If you don't see the router, nothing is going to work.
    You don't need to reboot or do sys-unconfig every time. Just change your settings using ifconfig and route add. Actually, you don't even need to set the route to be able to ping something inside your subnet.
    By your output of ifconfig, it seems that the NIC plumbed correctly.
    In the Solaris machine, try pinging your own IP address to make sure it responds and you don't have any issues with the NIC/driver.
    Make sure the cable and port in your router work. If you can use them with Windows, you should be able to use them with Solaris. Unless...
    Try using a crossover network cable to connect the Solaris computer to the router. This is personal experience: I had a Blade 100 that would not see my router. After a couple of hours of trying just about everything, I used a crossover cable and voila! it worked. Why? I don't know :) , but it worked...

  • L7590- doesn't detect network/ empty network configuration page

    Hi,
    I baught a new L7590. Installed it according to the instruction + software. The printer was not detected during installation.
    Network configuration page in the printer displays empty values- Network status: Offline, IP 0.0.0.0. etc.
    I tried to setup an IP manually, but it doesn't help (and it seems that the printer doesn't save my manually entered IP).
    Any ideas?
    Thanks,
    Dror.

    Offline with all-zero IP means that you have a bad cable, or a bad connector on the printer, or a bad connector on the router, or any combination of these.
    The netgear router should have indicators (usually on the front panel) that illuminates when a LAN connection is made. Check that first. Also, the printer has LED indicators on the LAN connector -- they need to be illuminated showing activity.
    Regards / Jim B / Wireless Enthusiasts
    ( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
    + Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

  • IPad sometimes doesn't detect wifi.

    I have an iPad 2 and it is very strange. Majority of the time, it cannot detect any wifi networks. Only sometimes it detect internet but is unstable. I know there are wifi because my phone can see the wifi networks and there are many. Also strange is, the iPad can always detect my phone if I use it as a personal hotspot thing but not anything else. Is there a reason? I need a reply asap. i use this device daily.

    smithes,
    It's best for you to start a new post with you problem rather than tag onto an older post. That way yo can get answers to your specific problem.
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I am at a total loss. I received am airport express to replace a netgear router. I need a step by step list of how to get it working. I am not very technical

    I am trying to get an airport express to work, it is replacing a netgear router. Tried following the directions that came with it plus suggestions sent to me  but so  far I am not able to get things going. Can anyone send me a step by step list from start to finish and also explain what numbers, passwords etc that I would have to install. I am the stupid in the KISS method of doing things

    Hi doctorshane
    Your router is the heart of your network. Replacing one changes everything.
    Please follow Philly_Phan's instructions here:
    My airport express won't stop flashing amber and I can't figure out how to hock it up.ihad a router which worked fine
    To which I would add: disconnect your modem from power and let it rest a moment while you configure your Express. Make it a habit to do this whenever you change the device connected to a cable or DSL modem. Most modems will refuse to communicate with anything new, until its memory has been reset with a power cycle.
    If you still have difficulty please explain where you are getting stuck. If you reply in that thread, not this one, it would help others with your problem. Don't begin a new question unless the recommendations you receive are getting nowhere or your question doesn't get any replies after a day or so. Philly_Phan's instructions are correct so follow them.
    Otherwise, you are likely to repeatedly receive the same advice and will fail to achieve any progress.

  • Can't connect to Netgear router with WPA enabled (MBP)

    I just received a Macbook pro today, everything is wonderful except wireless networking. When it first started up, it detected my wireless network, showed me the SSID, and asked for a password. I entered the password, and it failed to connect. I decided to try later and did the rest of the install.
    I connected via cabled ethernet and downloaded all of the updates. For a machine that shipped from the Apple store (custom config) a few days ago, I was surprised at having 13 LARGE updates to download. Grabbed them all, including a Firmware update which required two reboots. One for everything else, and another for the firmware.
    I tried again from sysprefs, and asked for the diagnostics. It asks me for my WEP key, and there is no option for WPA. I tried entered the WPA key anyway, despite only three WEP options showing up, and it still fails.
    Going through the Airport 'tab' and editing the connection, I get an option for WPA Personal, Enterprise, WPA 2 Personal, and WPA2 Enterprise as well.
    I tried using WPA Personal and WPA 2 Personal and entering the key which works on other notebooks, still no joy.

    Which Netgear router do you have? I use the Netgear
    RangeMax WPN824 and works well with WPA enabled but I
    think it may have failed to work the first time.
    WGT624 v2. Works fine with other wireless devices from a number of vendors, and is detected by the Mac, but I can't connect. I don't want to disable WPA if I can help it, I have a number of other systems configured for it as is, plus guests that come to visit.
    but some how I had to delete the connection,
    let airport find it again and re-enter the password
    to get it to work. One of those things I kind of did
    in the process of troubleshooting and can't remember
    exactly how it was I did it
    I'll try that and see if it helps. Thanks for following up.
    UPDATE: Sure enough, I deleted the network and added it back in by manually specifying the SSID and password, and it works now. No idea why, but there it is... thank you very much.

  • Connecting Powerbook to Netgear Router using WEP

    I am trying to set up a wireless network in my house using WEP Password protection. I have Netgear wireless router (WGR614 v5) that supports both WEP and WPA protection, but I am trying to add my dad's laptop to the network with a Netgear WG511 v1 network card, which only supports WEP protection. My PB connected fine when I had it set up with WPA, but since I switched to WEP, the Powerbook says "There was an error joining the AirPort network...". I also have one windows desktop wired to the router, as well as my PB, right now. Any suggestions

    Here are a few more methods of solving this problem:
    - try entering the same 13-character alphanumeric passphrase on both the Netgear router and the Mac
    - try entering the same 26-digit hexadecimal passphrase on both the Netgear router and the Mac
    Make sure the Netgear router is running the latest available firmware version available from Netgear's web site.

  • Since updating to iOS 8.1 my Bluetooth doesn't detect any devices

    Since updating to iOS 8.1 my Bluetooth doesn't detect any devices

    Good Morning Denise -
    Sorry to hear you are having issues connecting to your Wi-Fi network.  I'll include a few more things that you can try to troubleshoot this below.  The first thing that I'm wondering is if you cannot connect to your Wi-Fi at home -- are you able to connect to a different Wi-Fi network (at work, a local coffee shop, etc.)?  That would be one of the first things to try.
    Turning the modem and router in your house of and then on is also a common step as it "reinitializes" everything.  Hopefully, one of the steps below will help you with this.
    If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support
    http://support.apple.com/en-us/HT204051
    Restart.
    For more help, try restarting your device, router, or cable/DSL modem. After each step, check to see if you fixed the issue.
      • Restart your iOS device.
      • Unplug your router and plug it back in.
      • Unplug your cable or DSL modem and plug it back in.
    Still can’t connect?
    Reset your Network Settings. Tap Settings > General > Reset > Reset Network Settings. This also resets Wi-Fi networks and passwords, cellular settings, and VPN and APN settings that you’ve used before.
    Get more help
    Try connecting to a Wi-Fi network in a different location. If your device can connect, you’ll need to get help with your Wi-Fi network. If it can’t connect to any Wi-Fi networks, contact Apple.
    iOS and OS X: Recommended settings for Wi-Fi routers and access points - Apple Support
    http://support.apple.com/en-us/HT202068
    All the best,
    - Judy

  • My iMac 20"/Intel C2D 2.4 Doesn't Detect my Sanyo Xacti FH1A.

    My iMac 20"/Intel C2D 2.4 Doesn't Detect my *_+Sanyo Xacti FH1A+_* (1920x1080 60p/60i/MPEG-4 AVC/H.264) Camcorder.
    I followed exactly my Xacti manual, but nothing happens.
    From Mini USB (Xacti Camcoder) to USB (iMac)...nothing!
    After connecting the USB, In my Camcoder's screen, it says, *"Hard disk is not Connected."* & *"Disconnect USB converter cable if not using XACTI Library."*
    Is this an Apple issue or a Sanyo issue?
    Thanks!
    Frank S.
    SHOCKPROOFX.COM™ ESA
    Message was edited by: SHOCKPROOF

    Hi, first thing I would do is try connecting the Sanyo to another Mac.
    On your Mac try going the SMC route:- http://macosx.com/forums/howto-faqs/302002-reset-system-management-controller-sm c.html
    Try another connecting cable - Look on the FAQ (Sanyo Site)->http://sanyo.com/xacti/english/products/vpc_fh1a/index.html..........L
    Message was edited by: elmac

  • Leopard, Netgear router with printer server and Epson Aculaser C1100

    Hello!
    After updating to Leopard (10.5.1) all my printers were deleted. I've two printers connected to a Netgear FWG114Pv2 wireless router. My HP Photosmart is connected via ethernet to the router. It was easy to reinstalled this one.
    But I still can't get my Epson Aculaser C1100 back to work on my MacBook. The printer is connected with the USB port of the Netgear router. This setting worked fine before Leopard. On Tiger I only had to set up an IP printer with the IP of the router (no queue settings requiered) and to select the correct driver.
    If I try this now, my printer doesn't respond. If I choose the default postscript printer driver the data signal on my printer blinks for a short time, then the printer stops. Two Windows machines can properly print on the Aculaser. Even my WinXp running with Parallels Desktop on my MacBook can print to the Aculaser.
    If I connect the printer directly to the Mac and setup the printer, everthing works fine. I called the Apple support three weeks ago (1 h) with no result. We tried all advanced options in the printer settings and I send communication protocols to Apple (recorded with a little tool from them). Untill now I've no response.
    I also tried setting up differnet drivers as discussed here: http://discussions.apple.com/thread.jspa?messageID=6382269&#6382269
    Thanks!
    - Carnell

    Hello!
    After updating to Leopard (10.5.1) all my printers were deleted. I've two printers connected to a Netgear FWG114Pv2 wireless router. My HP Photosmart is connected via ethernet to the router. It was easy to reinstalled this one.
    But I still can't get my Epson Aculaser C1100 back to work on my MacBook. The printer is connected with the USB port of the Netgear router. This setting worked fine before Leopard. On Tiger I only had to set up an IP printer with the IP of the router (no queue settings requiered) and to select the correct driver.
    If I try this now, my printer doesn't respond. If I choose the default postscript printer driver the data signal on my printer blinks for a short time, then the printer stops. Two Windows machines can properly print on the Aculaser. Even my WinXp running with Parallels Desktop on my MacBook can print to the Aculaser.
    If I connect the printer directly to the Mac and setup the printer, everthing works fine. I called the Apple support three weeks ago (1 h) with no result. We tried all advanced options in the printer settings and I send communication protocols to Apple (recorded with a little tool from them). Untill now I've no response.
    I also tried setting up differnet drivers as discussed here: http://discussions.apple.com/thread.jspa?messageID=6382269&#6382269
    Thanks!
    - Carnell

  • Help required please! Netgear router to Airport Express to stream iTunes

    I have recently purchased an Airport Express and I have an iTunes account.
    I wish to stream music from a computer in one room to a Sony Hi fi in another room (not very far apart). I am having great difficulty in setting this up with instructions in the box.
    I have a NETGEAR wireless router provided free by Virgin when they put my broadband cable in. So I need simple step by step instructions on how to link the Netgear router on my computer with the Airport down on my hi-fi. I have the cable to the hi-fi plugged into the Airport and the router is working okay.
    I have spent hours on this and have also had a computer expert try to help me but he has drawn a blank. When I click on Airport Utilities the message comes up saying that it has not detected a wireless device. Scan Again! Can anybody help?

    initiate the set up using ethernet then configure the Express wireless setting. Y=As the second router you may need to put it in bridge mode. Use Airport Utility to do that.

Maybe you are looking for