E63 not showing switch off option when pressing re...

Recently my e63 not showing switch option when pressing red key however that key works for exit and cancel.So I am not able to switch off. Help me please.

Hi, alexbonn, and welcome to Apple Discussions.
1. No, there isn't.
2. I don't think so, though I'm not 100% certain. I believe the designers assumed that if you have your display open, (a) you want it to operate, and therefore (b) you want it to self-adjust its brightness for ambient light conditions, as it normally does when operating.
If you don't want the display open, you must operate the machine in clamshell mode, following all the instructions in the article you referenced. It isn't possible to start the machine up from a cold shutdown with its display closed.
If you don't want to use an external keyboard and mouse, and therefore can't use clamshell mode, you will just have to turn the backlight level down after each time you start the computer. That takes one second to do with the F1 key, so it shouldn't be too much of a bother. You could eliminate it by putting the computer to sleep instead of shutting it down. Each shutdown-and-startup process takes at least a full minute, so skipping it would save you far more time than finding a way to start the machine up with its display off. The machine also wakes from sleep far faster than it starts up from shutdown, and it remembers its display brightness setting when doing so.
Message was edited by: eww

Similar Messages

No Mirroring in Ipad 2? I have IPAD2 and Apple Tv 4.3. I can airplay videos/music from Ipad2 to my HDTV via ATV, but I cant mirror it. When I select airplay to switch from Ipad2 to Apple TV, Mirroring does not show as an option. What am I missing?

No Mirroring in Ipad 2?
I have IPAD2 and Apple Tv 4.3. I can airplay videos/music from Ipad2 to my HDTV via ATV, but I cant mirror it. When I select airplay to switch from Ipad2 to Apple TV, Mirroring does not show as an option. What am I missing?

That feature is not yet available, it is coming with IOS 5
http://www.apple.com/ca/ios/ios5/features.html

My mini ipod appears off and not respond to any commands when pressed the buttons to reset, apple logo appeared and then the apple support site and it shuts down. already tried all the steps, but none worked, and when I plug it into my computer it does no

My mini ipod appears off and not respond to any commands when pressed the buttons to reset, apple logo appeared and then the apple support site and it shuts down. already tried all the steps, but none worked, and when I plug it into my computer it does not appear in the iTunes bar. what do I do?

If MacKeeper corrupted the Recovery partition then even I underestimated its potential for damage. Garbage "cleaning" apps will cause misery but I have not found that the Recovery partition to have been affected by using MacKeeper or anything like it. I doubt that it did so, but I have learned not to underestimate the potential for such things to result in system corruption.
Before concluding your Mac has a hardware failure, try booting OS X Internet Recovery by holding command option r on startup (three fingers). That will force your iMac to bypass the Recovery partition altogether, and convey the ability to create a new one.
An Internet connection will be required (wired or wireless).
At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
Assuming the HD remains usable you can then use Disk Utility to erase it. Reinstall OS X, restore your essential software and other files, and don't reinstall the junk.

IPhone should not be switched off when screen is locked

Why we can switch off iPhone when it is locked? when phone is locked it should not allow to switch off.
Is this a bug or desired functionality?
Also I just found that if someone else register my iPhone with his/her apple id then it will never show any alert. So find my iPhone app is total waste. This app is good only if your phone is registered with your apple id.
Hope apple knows this problem, if not then this is really hopeless and not acceptable from them.
Thanks,
Yogi

1st of all, tyvm for your reply, really appreciated
question though, are you 100% sure about it ?

While erasing contact and setting my phone stop working showing round waiting circle and its not geting switched off also

while erasing contact and setting my phone stop working showing round waiting circle and its not geting switched off also

Try a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup
http://support.apple.com/kb/ht1766

My gen 4 ipod shuffle is not showing the green light when I switch it on (Green area shown). But when I plug it into the computer there initial orange blink and then solid orange. What wrong with it and how can I fix it.

My gen 4 ipod shuffle is not showing the green light when I switch it on (Green area shown). But when I plug it into the computer there initial orange blink and then solid orange. What wrong with it and how can I fix it.

Hello Korawees,
I was researching the issue you are describing and had a recommendation. The device is very simple, so the software troubleshooting for it is pretty limitted so I think you shoud restore the iPod shuffle and re sync the content. That way, if it is a software issue, this will fix it. Here is the article named Restoring iPod shuffle to factory settings found here: http://support.apple.com/kb/HT1481.
Before Starting
It is important to understand the difference between "update" and "restore." Update does not affect your settings or songs, it simply installs updated software that controls iPod shuffle. Restore erases the disk and restores iPod shuffle to its original factory condition with updated software. If you only need to update iPod shuffle, this should be done on the computer where music is normally synced. Updating on another computer will result in all songs being removed from iPod shuffle.
Warning: Because Restore erases all songs and files on iPod shuffle, make sure to back up any files you've saved on iPod shuffle. Your songs, podcasts, and audiobooks can be synced back to your iPod shuffle if the items are part of your iTunes library.
How to restore iPod shuffle
Ensure that you have an active Internet connection as new versions of iTunes and iPod Software may need to be downloaded to your computer.
Download and install the latest version of iTunes if you do not already have it installed.
Open iTunes, and then connect iPod shuffle to your computer.
After a few moments, iPod shuffle will appear in the Devices section on the left side of the Tunes window.
Select iPod shuffle under Devices and you will see information about it appear in the main iTunes window under the Summary tab/button for iPod shuffle (3rd and 4th generation) or the Settings tab/button for iPod shuffle (1st or 2nd generation).
The Version section tells you whether iPod shuffle is up to date or needs a newer version of the software.
Click the Restore button. You will be presented with one or more restore options that may prompt iTunes to automatically download the latest iPod Software. The 4-possible restore options are:
Restore Option 1: Restore - Restores with same iPod Software version already on iPod.
Restore Option 2: Use Same Version - Restores with same iPod Software version already on iPod even though a newer version is available.
Restore Option 3: Use Newest Version - Restores with the latest iPod Software currently on your computer.
Restore Option 4: Restore and Update - Restores after downloading the latest iPod Software on your computer.
If you are using a Mac, a message will appear prompting you to enter an administrator’s name and password.
A progress indicator will appear on the computer screen indicating that the restore process has started. Do not disconnect iPod shuffle during the restore process.
After the restore process is complete, the iPod shuffle's status light will flash orange continuously. The iPod Setup Assistant window will appear asking you to name your iPod and choose your syncing preferences as you did when you connected your iPod shuffle for the first time.
When you come to step 7, I recommend Restore Option 4.
Take care,
Sterling

My iphone does not automatically switch off the display light when locked. How do I fix this?

I have an iPhone 5 with iOS 8.2 software.
My iPhone does not automatically switch off the display light when it is locked. Therefore, if I get an e-mail/text message/pop-up from other application, the light just stays on, which obviously drains my battery.
The problem just started yesterday, and it has been a couple of days since I updated the software, so I wouldn't think the software update is the problem.
I have tried restarting the phone (using home and lock button), but that did not work.
Something else that seems weird is that once in a while, a blue beam rolls over the screen from one side to the other. I don't know why it does this, and have no idea whether this is related to the display light issue.
I hope someone is able to help by telling me what to do in order to get my phone to act normal again.
Thank you x

Restart your device by holding the home and power button until the Apple logo appears. You will not lose any data.

My ipad is not showing the apn settings when i selected cellular data option on settings? y?

my ipad is not showing the apn settings when i selected cellular data option on settings? y?

pvonk, you were right, something was amiss. It is just a shared calendar (me and my PA) and nothing I could do would seemingly connect the iCal and cloud accounts.
Late last night I upgraded from OSX 10.7.4 to 10.7.5, as I thought that might resolve some settings or minor corruptions in the way my Mac Book was working.
This morning I opened iCal, and once again it attempted to refresh the page. And a few seconds later my iCloud diary appeared on iCal.
The moral of this issue is I think as follows.... when you check all the settings and follow all the advice, and something like this is still not working then it could be the software is slightly corrupt, so a re-install or applying an update (if there is one available) will help resolve issues.
So spot on advice, something was amiss and is now resolved thanks

My iPhone 4 won't switch off. When I press the power button at the top, the phone doesn't respond. Please help!

My iPhone 4 won't switch off. When I press the power button at the top, the phone doesn't respond. Please help!

Try a reset

My iphone switched off and when I turn it back on it wants to connect to itunes

My iphone switched off and when I turn it back on it wants to connect to itunes
I was taing photo's and battery was half full - I switched it off and when I turned it on it says connect to itunes. I am not near my laptop?! What can I do

That is referred to recovery mode. At this point your only option is to restore to factory & then from a backup if you have one

I am trying to configure my SCXI-1540 card for excitation voltage and frequency using MAX - but it is not giving me that option when I click on the card and then properties, am I looking in the wrong place?

I am trying to configure my SCXI-1540 w/1315 card for excitation voltage and frequency using MAX - but it is not giving me that option when I click on the card and then properties, am I looking in the wrong place?
I have LabVIEW Express 7.0 Professional - SCXI-1000 Chassiss - along with SCXI-1112, and SCXI 1520/1314 - cable to the PCI-6052E is attached to the 1520 card.
MAX says it recognizes all the cards in the chassiss.

Jeremy, Thanks for the reply.
I tried to set up the system as DAQmx.
I had MAX auto-detect the set-up - and it recognized all the cards - but did not select the 1315 accessory on the 1540 card - I had to do that manually - but in the configuration section I would select the accessory and it would deselect itself. I had to get out of the set-up and then right click on the 1540 card and click on the "Accessories" tab and select the 1315 terminal block that way.
It didn't seem right that the system should behave that way, but I pressed onward.
I then tried to create a new DAQmx Task
When I create new DAQmx task and then click on Analog Input no "Position" Tab appears for me to select, all I get are:
Analog>>Voltage
Analog>>Temperature
Ana
log>>Strain
Analog>>Current
Analog>>Resistance
Analog>>Frequency
Analog>>Custom Voltage with Excitation
Do you think there might be something wrong with either my hardware or perhaps my configuration that is not allowing it to recognize the 1540/1315 in DAQmx?
I had included the system report of what programs I am using, etc. as attached file nireport.txt
After the DAQmx did not work I tried installing everything as Traditional DAQ and it did let me set-up the 1540 Card with Excitation Voltage and Frequency and gain - I then went in to the VI that I had built and tried to use the Express DAQ Assisant to read the channel that I am connected to on the 1315/1540 - when I try to use DAQ Assistant it gives me an error saying that "Device not available in NI-DAQmx. It is possible that the device is being use by traditional NI-DAQ"
Which I guess it is since both configurations are now set-up in MAX.
I would PREFER to use the DAQmx set-up, but I am confused as to WHY it won
't come up with
Analog input>>POSITION>>LVDT
When I try to create a new DAQmx task.
Thanks for the help so far! As you can probably tell I am new at this.
Ryan
Attachments:
nireport.txt ‏2 KB

My iPhone 4s is not turning switch off

My iPhone 4S is not turning switch off.

Try holding the lock and the home bottom until the phone turns black when this happens let go of the home button but keep the lock button held down this will restart your phone ( u wont lose anything ) and then try turning it off again if it still don't work and your iphone is still under warrenty you can either call apple 01212601900 to book a genius appointment or you can do it online then just go in and they will help you resolve the issue or change your phone

My iphone email not showing attachment and signature when send out to anyone ?

email not showing attachment and signature when send out to anyone ?

This is what I did:
How to put iPod touch / iPhone into DFU mode
A small guide on how to put your iPod touch / iPhone into DFU mode. Works with all G’s of iPod touch / iPhone
What is DFU: Device Firmware Upgrade
Step 1: Turn off your iPod touch / iPhone completely and connect to PC / mac
Step 2: Hold down the Power button for 3 seconds
Step 3: Without releasing the power button, also hold the Home button for 10 seconds
Step 4: Without releasing the home button, release the power button and keep holding the Home button for 20 seconds.
Itunes will identify that you are in DFU mode.
That's when I got the black screen with USB and iTunes icons. iTunes itself, did not show my phone.

Recently, U2 music appeared on my ipod without my requesting it or wanting it. I was able to delete all of the songs except for one. How do I delete the last one from my ipod? The song does not show up in iTunes when I plug my ipod into the computer.

Recently, U2 music appeared on my ipod without my requesting it or wanting it. I was able to delete all of the songs except for one. How do I delete the last one from my ipod? The song does not show up in iTunes when I plug my ipod into the computer. The version installed on my ipod is 7.1.2(11D257).

Hi donfrommars,
Welcome to the Apple Support Communities!
Please use the following article for information and instruction on deleting the U2 album from your devices and account.
Remove iTunes gift album "Songs of Innocence" from your iTunes music library and purchases
Have a great day,
Joe

My Iphone calendar events are not showing up in iCal when I sync? Syncing has not been an issue till today?

My Iphone calendar events are not showing up in iCal when I sync? Syncing has not been an issue till today?

I found this tip from a 2011 discussion on the same topic.
Open iCal and backup or export your entries. Make a note of the fie name and location, you're going to need them in a minute. Once your backup/export is completed, close the iCal application.
Open Finder and remove everything inside the "Username/Library/Calendars" folder. For instance, if your username is "Joe", then move everything inside the "Joe/Library/Calendars" folder.
Open the iSync application. It's located in the "/Applications/" folder. Once iSync is opened, go into the iSync Preferences (iSync -> Preferences) and push/click the "Reset Sync History" button. Then, close the iSync application.
Re-Open the iCal application and Import (File -> Import) a new calendar. When prompted, use your notes from Step #1 to select the file your created earlier. Once completed, close the iCal application (you should have all of your calendar entries back.)
Open the iTunes application and connect your Apple iPhone to the computer.
Within the Advanced section of the Info tab for the Apple iPhone, check the box the overwrites/replaces the Calendar data on the Apple iPhone.
Click the Apple/Sync button. New, modified and deleted entries should now be syncing correctly.
That's it! You should be all set and iTunes, iCal and our Apple iPhone should all be playing nicely as friends again. We've used the exact method to repair our own Apple iPhone at least once... maybe even twice.

E63 not showing switch off option when pressing re...

Similar Messages

Maybe you are looking for