E63 unable to connect to Netgear WGR614v7: invalid...

Just bought a Nokia E63 and keen to try connecting via my wireless router.
Sees the network immediately. Easy to setup. However, as soon as I try to connect to the internet (e.g. Google) it says WLAN:
Unable to connect:
Invalid WPA pre-shared key.
I assume it is referring to the network or passphrase key. Well, just to be sure I changed it and then went in on my laptop and had to change that so it could reconnect. Laptop works fine (again); phone still a no go.
Wireless router setup as:
Region: Europe
Channel 11
Mode g and b
Wireless AP: ON
Broadcast: ON
Security options: WPA-PSK [TKIP] + WPA2-PSK [AES]
Enable WMM: DISABLE
No wireless card access setup.
WAN Setup
Connect Automatically, as Required = yes
Disable SPI Firewall = unticked
Default DMZ Server ... = unticked
Respond to Ping on Internet Port = unticked
MTU Size (in bytes) = 1500
NAT Filtering Secured Open = unticked
Disable SIP ALG = SECURED
Ideas anyone?
Cheers,
J
Solved!
Go to Solution.

jceh wrote:
Originally I just followed the auto-setup and entered responses as required. Since then I've been trying different combinations trying to get it to work. Currently I go in through: menu > tools > settings > connection > access points and then select my router SSID.
Data bearer: wireless LAN
Network status: public
WLAN network mode: infrastructure
Security mode: WPA/WPA2
WPA/WPA2: pre-shared key
Pre-shared key: = router pass key (note this contains odd characters such as £ and % and commas.)
WPA2 only mode: off
All advanced settings (IPv4 etc) are automatic.
J
Looks allright to me. Use another key without the special characters or spaces. Check the router for MAC filtering. If you're using DNS servers you have to define them in the IPv4 section, if not leave it automatic (DHCP). Turn off the powersaving in the WLAN settings. Tools-> settings-> connection-> WLAN-> options-> advanced settings->yes-> powersaving-> off.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Similar Messages

Unable to connect to XL Reporter (Invalid use of Null)

I am facing problem to connect to XL reporter (2007B, PL 15). Would appreciate if anybody who encountered similar problem before can give advise on the possible solution. Thank you.
Unable to connect to XL Reporter.
Error! User authentication failed!
Cause: Invalid use of Null.

I have done the recommendations on those threads, but now the error changed. Upon connecting the error message is:
There was one or more execution errors!
Source: Microsoft OLE DB Provider for SQL Server
Message: Must declare the scalar variable "@strRow4AllCommonDimensions".
Script: SBOOEM\MSSQL\ixPartnerObjects.sql(5710)
(Logfile: DblUtilExec.Log)
Then, the following error message is displayed:
Unable to connect to XL Reporter.
Error! User authentication failed!
Cause: ExtCode -1
I tried the ConnectionManager.exe but problem persists. If you have any other suggestions please let me know. Thank you.

Unable to connect to netgear router and internet

I've installed Solaris 10 1/06 (x86) on a system running an intel mainboard model D865PERL. This has a built in ethernet controller ( Intel 82547EI gigabit lan controller) and the mainboard appears on the bigadmin hcl as being supported. The OS recognizes the built-in NIC as e1000g0 but during initial installation it attempts to configure e1000g0 first thing then responds with "skipped interface e1000g0" then proceeds with the installation.
I choose Networked and run through the installation (or following a sys-unconfig) selecting to enable DHCP but it returns "Could not contact a dhcp server on the network interface e1000g0." I then have to set it up staticly to resume the configurator. I specify the e1000g0's ip address as 192.168.0.5 with a subnet mask of 255.255.255.0. I choose not to enable IPv6 (ive tried it with IPv6 enabled) and no Kerberos. I attempt to specify DNS for name service and use my internet providers domain name (both the name and the resolved ip address associated with it) with the two DNS server ip addresses resolved by the WAN setup on the router (Netgear FR328S), selecting no search domains. But it is unable to locate my hostname on the provided DNS's i entered. dunno why it would say that, it really doesn't matter does it? Anyway, I specify no name service to proceed. i choose no to the question in regards to overriding the system's default NFS version 4 domain name to continue.
It knows it has a cable connection but I'm unable to see the router, even though ive specified 192.168.0.1 as the default route (ive also tried setting it to detect the default route on reboot but it fails). The router doesn't see the NIC as a connected device either (im setting here on another computer running xp :() Ive tried disabling the DHCP server feature on the router and I still cant see it. Ive tried setting the NIC's ip address and MAC address as reserved in the LAN setup on the router (this works for my winXP drive where I need a static IP address and also have access to the internet). I've tried leaving the reserved IP address assignment (attached to the NIC's mac address and host name that i specified) with DHCP enabled but I'm still unable to resolve an IP address from the dhcp server. I made sure the router had the latest firmware and went through the configuration with a fine toothed comb, so to speak. nothing seems to work.
I tried to connect directly to the internet device, removing the router and it still fails to resolve an ip address via dhcp. what am i missing here? Ive run through this multiple times now and im at a loss. Ive also referenced sun's System Administration Guide: IP Service to try to resolve the issue but im now all I'm doing is going in circles.
# ifconfig -a
lo0: flags=2001000849<UP, LOOPBACK, RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
e1000g0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 192.168.0.5 netmask ffffff00 broadcast 192.168.0.255
ether 00:13:20:47:6c:48
# netstat -rn
Routing Table: IPv4
Destination Gateway Flags Ref Use Interfacd
192.168.0.0 192.168.0.5 U 1 0 e1000g0
224.0.0.0 192.168.0.5 U 1 0 e1000g0
default 192.168.0.1 UG 1 0
127.0.0.1 127.0.0.1 UH 4 85 lo0
# prtconf -pv
Node 0x000019
compatible: 'pci8086,1019.8086.301f.0'.....etc
model: 'Ethernet controller'
subsystem-vendor-id: 00008086
subsystem-id: 0000301f
vendor-id: 00008086
device-id: 00001019
name: 'pci8086,301f'

Couple of suggestions:
Work first on seeing the router, using a static IP and pings.
Forget about DNS, DHCP, etc for now. If you don't see the router, nothing is going to work.
You don't need to reboot or do sys-unconfig every time. Just change your settings using ifconfig and route add. Actually, you don't even need to set the route to be able to ping something inside your subnet.
By your output of ifconfig, it seems that the NIC plumbed correctly.
In the Solaris machine, try pinging your own IP address to make sure it responds and you don't have any issues with the NIC/driver.
Make sure the cable and port in your router work. If you can use them with Windows, you should be able to use them with Solaris. Unless...
Try using a crossover network cable to connect the Solaris computer to the router. This is personal experience: I had a Blade 100 that would not see my router. After a couple of hours of trying just about everything, I used a crossover cable and voila! it worked. Why? I don't know :) , but it worked...

Nokia 500 unable to connect to Netgear WGR614

I have installed the Router "Netgear WGR614" and i connected it to 3 systems and one of them is a Wireless Laptop, when i am able to browsing through laptop then why i am unable to browse through my Nokia 500 Phone?
I have also given the Password but it is keep on saying "Connection failed" why?
just not when i was at office i was able to connect to another Netgear router, but that router doesnt have a security password.
thank you.
Reddy.
Solved!
Go to Solution.

Hey bgautham,
Welcome to the discussion board!
As you are able to connect with your device when you are at the office it looks more like a router issue.
Have you tried creating a new access point as shown is this video, also make sure that you are inputting the right characters, respecting lower and upper cases.
You can try resetting your router as some may need a reset to accept a new device connection.
Hope this helps!
BaptisteJu

Cisco RV042 VPN unable to connect to Netgear PS FVS318

Hello,
We recently replaced one of two Netgear ProSafe VPN FVS318 with a Cisco RV042 VPN. Both Netgear were configured site-site and was working fine until one of them failed. We copied as much configuration settings from the failed Netgear PS to the RV042 but were unsuccessful in establishing a connection between the two sites.
The logs on the Cisco router shows this:
VPN Log packet from 1.1.1.1:500: received Vendor ID payload [RFC 3947]
VPN Log packet from 1.1.1.1:500: ignoring Vendor ID payload [439b59f8ba676c4c7737ae22eab8f582]
VPN Log packet from 1.1.1.1:500: ignoring Vendor ID payload [439b59f8ba676c4c7737ae22eab8f582]
VPN Log packet from 1.1.1.1:500: ignoring Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03]
VPN Log packet from 1.1.1.1:500: ignoring Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03]
VPN Log packet from 1.1.1.1:500: ignoring Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n]
VPN Log packet from 1.1.1.1:500: ignoring Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n]
VPN Log packet from 1.1.1.1:500: [Tunnel Negotiation Info] <<< Responder Received Main Mode 1st packet
VPN Log packet from 1.1.1.1:500: [Tunnel Negotiation Info] <<< Responder Received Main Mode 1st packet
VPN Log packet from 1.1.1.1:500: initial Main Mode message received on 2.2.2.2:500 but no connection has been authorized with policy=PSK
Each time we select a tunnel test connect, that last message appears with "but no connection has been authorized with policy=PSK"
*replaced actual IP with sample IP.
Any ideas why this is happening?
Thank you!

Hello,
It looks as RV042 receive phase 1 configuration from Netgear, but due to mismatch with it's phase 1 settings does not reply back.
I can't be more specific as this could be anything in phase 1 - aggressive/main mode; the WAN IP addresses, encryption or SA lifetime. As well if any of the devices is behind NAT, the option NAT traversal should be checked.
Regards,
Kremena

Unable to connect to network/Internet: Invalid IP configuation / Unidentified Network

Okay, I've got a really strange problem. I haven't been able to find a solution online (well, I found a lot of "solutions" but none of them have worked so far), and the IT company I work with hasn't had a solution either. We're all completely baffled.
I have 2 brand new computers (both are Windows 8 Pro machines that were downgraded to Windows 7 Pro prior to me receiving them), I took them out of the box yesterday. I was planning to get software installed on the first one today. However, I have not been
able to put the computer on the network properly (not even long enough to make it part of the domain). After trying to make the first computer work for a few hours, I tried the second - same problem.
Here's what I'm encountering: Whenever the network is active, the status reads "unidentified network - no Internet access". If I run "diagnose" on the network connection, it tells me that the "local area connection doesn't have a
valid ip configuration".
I have tried a lot of possible solutions, including (but not limited to):
Disabling/Re-enabling the network connection
3 different Ethernet cables (including 2 that were pulled out of the back of other - Windows XP - computers that are functioning properly)
Countless restarts
Unplugging everything for about 3 hours and then trying again
Repairing TCP/IP
ROUTE DELETE 0.0.0.0
Manually assigning an IP address (though I'm not confidant I had the correct information)
Updating the drivers (up to date - though it has no Internet connection, so who knows for sure)
Restarting our server (that powers the domain)
Uninstalling McAfee (this was preinstalled on the machines)
Disabling the Windows Firewall
Checking startup services for some odd looking ID string service.
Disabling TCP/IPv6
sfc /scannow
This office currently has 5 Windows XP computers, 4 Windows 7 computers, and various other wired and wireless devices that aren't having any trouble connecting to the network. It's just these two new computers.
Can anyone offer advice? I'd be interested in knowing what the correct default IP configuration is for the computers (or how to learn it). Ipconfig doesn't help - there doesn't seem to be an IP address assigned.

Hi JoshLindquist,
Please explain a bit about the following questions:
1. Do you means that when you run “ipconfig -all”, there are no IP address assigned to these two computer or we got 169.xx.xx.xx IP?
2. Do you use the DHCP server to assign the IP address?
If you use the DHCP server, please contact the IT system admin to check if we need to add the MAC address to the allow list.
For more information about allow list, please refer to the following blog.
http://blogs.technet.com/b/teamdhcp/archive/2012/09/15/scope-level-link-layer-filtering-using-dhcp-policies-in-windows-server-2012.aspx
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Unable to connect netgear DG834G wireless to macbook

Hi
I am unable to connect the Netgear Router DG834G wireless to my Macbook. It works fine through the ethernet cable but when i try and connect wireless it says invalid password?

Hi
Changing your ISP won't fix this problem. There is one last thing that's worth a try....
Creating a new "Location":
System Preferences > Network
Select the AirPort from the left hand side
Click on the Locations combo box and select Edit Locations...
Click on + to add a new location, call it "Home" (or anything else you prefer)
Click on Advanced
Select the AirPort tab and enter your network name
Select TCP/IP tab.
Configure IPv4 Using DHCP
Now click on Renew DHCP Lease. After a few seconds you should get an IP address (probably 192.168.x.x)
Click on Proxies tab.
Select Auto Proxy Discovery and Use Passive FTP
Click on OK and Apply, etc.
If this doesn't fix your problem then I suggest your Airport card is failing and you need to visit an Apple Store.
Bob

Report connection error ORA-12203 : TNS : unable to connect to destination

hi
when in open report and go to query builder then show me this error
REP-0501 : Unable to connect to the specified database.
ORA-12203 : TNS : unable to connect to destination
how i connect report and form with oracle8i which two file in copy into developer folder
please give he solution
thanking your

$ oerr ora 12203
12203, 00000, "TNS:unable to connect to destination"
// *Cause: Invalid address specified or destination is not listening.
// This error can also occur because of underlying network or network
// transport problems.
// *Action: Verify that the net service name you entered was correct.
// Verify that the ADDRESS portion of the connect descriptor which
// corresponds to the net service name is correct. Ensure that the
// destination process (for example the listener) is running at the
// remote node.
$In Developer Home check that TNS alias in tnsnames.ora has no errors. Are you able to connect from Sql*Plus from Developer Home, using same alias ?
Also check that the listener is running on DB machine.
how i connect report and form with oracle8i which two file in copy into developer folder What does it mean exactly ?

HT1695 I can't connect to my wifi network not even when it has no security on I get "unable to connect to network "netgear" anyone have this issue and maybe know how to fix it?

Hi
When I try to connect to my wifi network I receive message "Unable to join network "Netgear" this starated as of 8/16 before thsn I never had this problem
connecting to this network previously .I have attempted after manually entry of DNS still nothing a;so did the network reset, and full reset of settings and still
get nothing I even have my network unsecured at this very moment still nothing changed it does not show the network info ; no DNS address or anything any suggestions

- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router.
- Reset networks settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points

Unable to connect to database , invalid username/password

hi ,
i am currently using oracle discoverer 10g (10.1.2.3) and db is 11.2.0.1 , OS is RHEL 5
iam unable to connect to DB from viewer
it gives invalid username/password
the most recent activity i performed was to import eul (version 5) from another instance
i have checked with permissions of dbc file
anyhting else i might have to look on ?

Pl re-post in the Discoverer forum - Discoverer
HTH
Srini

Unable to connect to Oracle Applications database invalid username/password

Hi,
Ou Requirement is we want to connect to Oracle Applications using discoverer plus and discoverer viewer.
Application Server used : 10.1.2.0.2
Oracle Applications : R12 RUP4
We have installed application server 10g with OID and when we try to connect to oracle applications we are getting
A connection error has occurred.
- Failed to connect to database - Unable to connect to Oracle Applications database: invalid username/password.
Regards
Ketan

Hi,
I think better to check with your sysadmin or DBA on this, I had the same isuse before but Apps 11i with Discoverer, I talked to ERP sysadmin and worked fine.
Since applications userid cannot talk with Discoverer schema (eul10_us) and it should directly talk with APPS user and then APPS user can talk with Discoverer user.
To the best of my knowledge I provided.
--skat

Unable to connect to 11.5.10 vision instance Invalid username and password

where using applications11.5.10.2 vision instance. We were able to connect to the database using sqlplus which means there must be nothing wrong with our connectivity. I've tried to logon to the applciations using the defauilt password w/c is operations/welcome.When I try to logon using ADI its giving me an error " Could not connect to the database Invalid Username and Password"
GWYUID: applsyspub/pub
FNDNAME:apps
I'm also using the latest version of ADI w/c is 7.2.4.10.27.
need help please on how to connect ADI to the Application
THanks,
Chase

Check with your sysadmin. They may have setup a Server ID, which you will need to introduce to your database definition to complete the signon process.

Unable to connect to WiFi on 10.6.8

I just moved to a new apartment and have thus far been unable to connect to the WiFi here.
After browsing these forms and Google and trying a good number of solutions that worked for others I'm left at a loss. I running a MacBook Pro 15" with OSX 10.6.8 SL and attempting to connect througn WiFi to a Netgear WPN824v3 with no success.
I am able to see the SSID in my Airport dropdown and it recognizes that it is secured with WPA however, when I enter the correct password it states: "Connection Failed" If I enter the wrong password it states: "Invalid Password"
I have tried restarting multiple times. I shutdown and rebooted manually,
Rebooted the router,
Deleted:
com.apple.airport.preferences.plist
NetworkInterfaces.plist
preferences.plist
Reset my NVRAM,
Changed the routers mode from 108Mb to G&B only as well as changing the channel to both 1 then 11, (its currently back on 108Mb mode and channel 6)
Installed all software updates as of 03/21/13.
I also tried repairing disk permissions.
I'm currently at a loss and can only connect through ethernet here at my apartment while my roommates (and my phone) can access through the wifi. (I have no issue connecting to other Wifi connections, coffee shops etc.) Any help you guys could provide would be awesome.
Thanks in advance.
Josh

Also, please note that I attempted connecting with a USB Wifi adapter (Alfa AWUS036h) and it works completly fine. This, and please correct me if im incorrect, narrows it down to an Airport issue.
Also, I forgot to mention that I attempted the "Assist Me" function as well but to no avail.

The search request was unable to connect to the Search Service

I have upgraded from WSS 3.0 to SharePoint Foundation 2010. So far everything appears to be OK apart from my search.
When I attempt a search I get the following:
The search request was unable to connect to the Search Service.
I checked the Manage Database Update Status in Central Admin and noticed the following(an upgrade is required):
Also, I checked Manage Services on Server and noticed that the only search related service is 'SharePoint Foundation Help Search'.
If I go into Manage Service Applications and click new there is no option to add a search service.
Finally I tried PSConfig:
PS C:\Users\administrator.ACHESON> PSConfig.exe -cmd upgrade -inplace b2b -force
-cmd applicationcontent -install -cmd installfeatures
SharePoint Products Configuration Wizard version 14.0.6009.1000. Copyright (C) M
icrosoft Corporation 2010. All rights reserved.
Performing configuration task 1 of 6
Initializing SharePoint Products upgrade...
Waiting to get a lock to upgrade the farm.
Successfully initialized SharePoint Products upgrade.
Performing configuration task 2 of 6
Initiating the upgrade sequence...
Successfully initiated the upgrade sequence.
Performing configuration task 3 of 6
Registering SharePoint features...
Feature installation has determined that there are no new features that require
installation.
Successfully registered SharePoint features.
Performing configuration task 4 of 6
Installing the application content files...
Installing the SharePoint Central Administration Web Application content files..
Installing the SharePoint Web Application content files...
Successfully installed the application content files.
Performing configuration task 5 of 6
Upgrading SharePoint Products...
10.00%Failed to upgrade SharePoint Products.
An exception of type Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfig
urationTaskException was thrown. Additional exception information: The upgrade
command is invalid or a failure has been encountered.
Failed to upgrade SharePoint Products.
Total number of configuration settings run: 5
Total number of successful configuration settings: 4
Total number of unsuccessful configuration settings: 1
Successfully stopped the configuration of SharePoint Products.
Configuration of SharePoint Products failed. Configuration must be performed be
fore you use SharePoint Products. For further details, see the diagnostic log l
ocated at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\1
4\LOGS\PSCDiagnostics_10_9_2013_12_47_54_528_1859316720.log and the application
event log.
This is the warnings and errors that the log contained:
10/09/2013 12:48:16 10 WRN Found registry key HKEY_LOCAL_MACHINE\Software\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS\ComponentsToRegister, but the SubKeyCount is zero
10/09/2013 12:48:24 10 WRN Failed to add the service connection point for this farm
10/09/2013 12:48:24 10 WRN Unable to create a Service Connection Point in the current Active Directory domain. Verify that the SharePoint container exists in the current domain and that you have rights to write to it.
Microsoft.SharePoint.SPException: The object LDAP://CN=Microsoft SharePoint Products,CN=System,DC=acheson-glover,DC=com doesn't exist in the directory.
at Microsoft.SharePoint.Administration.SPServiceConnectionPoint.Ensure(String serviceBindingInformation)
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
10/09/2013 12:48:40 10 ERR The exclusive inplace upgrader timer job failed.
10/09/2013 12:48:40 10 ERR Task upgrade has failed with a PostSetupConfigurationTaskException An exception of type Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException was thrown. Additional exception information: The upgrade command is invalid or a failure has been encountered.
Failed to upgrade SharePoint Products.
10/09/2013 12:48:40 10 ERR An exception of type Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException was thrown. Additional exception information: The upgrade command is invalid or a failure has been encountered.
Failed to upgrade SharePoint Products.
Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException: Exception of type 'Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException' was thrown.
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
10/09/2013 12:48:40 10 ERR Task upgrade has failed
10/09/2013 12:48:40 1 ERR Task upgrade SharePoint Products failed, so stopping execution of the engine
10/09/2013 12:48:40 1 ERR Failed to upgrade SharePoint Products.
An exception of type Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException was thrown. Additional exception information: The upgrade command is invalid or a failure has been encountered.
Failed to upgrade SharePoint Products.
Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException: Exception of type 'Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException' was thrown.
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
10/09/2013 12:48:41 1 ERR One or more configuration tasks has failed or some tasks were not run
10/09/2013 12:48:41 1 ERR One or more configuration tasks has failed to execute
10/09/2013 12:48:41 1 ERR Configuration of SharePoint Products failed. Configuration must be performed in order for this product to operate properly. To diagnose the problem, review the extended error information located at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS\PSCDiagnostics_10_9_2013_12_47_54_528_1859316720.log, fix the problem, and run this configuration wizard again.
10/09/2013 12:48:41 1 ERR Post setup configuration was not run successfully when using the command line task driver module
How do I resolve this?
Cheers
Paul

Hi,
SharePoint Foundation the search service should be installed by default. It's not the same as with 2010 Standard or Enterprise where you can create a "Service Application" for it.
Follow this article to configure SharePoint Foundation Search:
http://plexhosted.blogspot.com/2011/11/how-to-configure-sharepoint-foundation.html
Meanwhile, here is a thread which discusses the similar question:
Configuration of SharePoint Foundation 2010 Search
http://social.technet.microsoft.com/Forums/sharepoint/en-US/af57728f-ae20-477b-8c67-2b594a1a72de/configuration-of-sharepoint-foundation-2010-search?forum=sharepointadminprevious
Thanks.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Unable to connect my Apple TV to my wireless network

Hi
I have an Apple TVMC572LL/A
I had to replace my wireless router. I am now using a dual band router.
I am unable to connect to the 5GHz signal offered by the router.
It is a Netgear N750.
Is there an issue with this generation Apple TV and 5GHz?

Hi Iv'e been trying to solve this issue for a couple of weeks now and have done loads of digging. My Atv worked fine when I bought it Gen1 and connected to my wifi no problem. Then for some reason dropped the wifi, it could find the wifi but wouldn't let me join it!
The solution and worked for me....I removed my router that was sitting on top of the Atv. Apparently it causes issues and bingo connected straight away to my wifi
Have read a lot of stories thread regarding these issues and people storing the unit behind under tv's etc. Stand the unit alone and see what happenes?
Hope this works for you as it did for me Happy viewing again.

E63 unable to connect to Netgear WGR614v7: invalid...

Similar Messages

Maybe you are looking for