E63: Webaccess via WLAN just one time until restar...
Hi all,
I've some troubles with a brand new E63. I can connect to the SE515-WLAN-Router-ADSL-Modem, i can surfing, receiving e-mails so on. WLANsetting is on demand. Now I finish all activities. Two minutes later I want to surf again. This time the E63 says: System Error or No Gateway reply. If I reboot the Router, I can surf one time again.
I have also an E51 and it works fine with the same router.
Guess, it's a router issue, but how to solve it?
Look man
From your speech , I could get that your old phone isn't Nokia
or it may be nokia S40 (like : 5200 , 5300 , 6300 ......)
Now the problem is that your old phone system isn't the same as nokia E63 system.The folders of the old system may cause conflict with the new one (resulting in (GSE : General System Error ) that you get)
So the first thing you should have done is copying all thing from your old Micro-SD to PC then format the memory on PC (My computer ---> format ). Then after format , insert the memory into Your E63 , this will create some folders (video, sounds, documents , ....)
When you solve this problem the following problems will be solved .
Another thing you don't probably know is that 99.9999999 % of Nokia users don't copy images or any other thing from messages by clicking "save" as you have done, instead, they use Xplore.
Xplore makes mobile the same as PC
get it from here:
Note : I am not telling u to buy Xplore, use the free version , it's the as full one but for the 3 seconds banner when you run it.
Use Xplore to go to message inbox b : open xplore ----- > Menu --- > tools -----> options
Ayman Ahmed
Similar Messages
-
hi max
i have loop for tmp_emp_day and i wont to do the loop target_hours_exp just one time (fill cnt_days just one time) in all the big loop (tmp_emp_day) how i do that?
LOOP AT tmp_emp_day ASSIGNING <fs_emp>.
CALL FUNCTION 'Z_EMP_CAP'
EXPORTING
pernr = <fs_emp>-pernr
begda = fir_day
endda = last_day
IMPORTING
target_hrs = target_hrs
TABLES
target_hours_exp = target_hours_exp
work_hours = work_hours.
<b>LOOP AT target_hours_exp ASSIGNING <target_hours_exp> WHERE stdaz = '0.5' .
ADD 1 TO cnt_days.
ENDLOOP.</b>
<fs_emp>-miss_days = <fs_emp>-miss_days - cnt_days.
APPEND <fs_emp> TO emp_miss_days.
ENDLOOP.
Regardstry
LOOP AT tmp_emp_day ASSIGNING <fs_emp>.
CALL FUNCTION 'Z_EMP_CAP'
EXPORTING
pernr = <fs_emp>-pernr
begda = fir_day
endda = last_day
IMPORTING
target_hrs = target_hrs
TABLES
target_hours_exp = target_hours_exp
work_hours = work_hours.
if sy-tabix = 1.
LOOP AT target_hours_exp ASSIGNING <target_hours_exp> WHERE stdaz = '0.5' .
ADD 1 TO cnt_days.
ENDLOOP.
endif.
plz reward points if it helps -
Excecute a planning sequence when open Web Template (JUST ONE TIME)
Hello experts,
I want to excecute a planning sequence everytime when a webtemplate is opened.
I use the "Action before first display" for this. The problem is, that the planning sequence is excecuted multiple times when I open the web template. The web template contains several queries. Could it be that the planning sequence is started for every query?
If yes is there a way to suppress this? I want to run the planning sequence just one time for the whole web template
Thanks
JohannesYes I tried in action before rendering it is the same behaviour with the difference that the sequence is also executed after clicking on a button with another planning sequence. Action before first display is excactly what I need but I want to run the sequence just one time when the web template is loaded and not for every query. We don't use tabs at all.
Thanks
Johannes -
My application (in delphi) send Name(string), Family(string), And children (array of string)...
then These data will convert into Hex format and will be sent to CAD via APDU...
My question is how can I send all of these data at once via on APDU command, should I send Name and Family one by one and also send every index in my array one by one ??
I wrote an applet which has a SetName, Set Family and SetChildren Methods and once call SetName and send Name via one APDU, then call SetFamily and send Family via other APDU, and the big problem is in array that I'm sending each index data of array via one APDU...
I'm sure it's a foolish way and there's a better way to send these data :)
would u please help me and guid me what can I do, this is so much urgent
Kind Regards
HanaZip_Smart_Girl wrote:
first a question about your last reply:
I add this code in my applet process method, so what can i send from JCOP, can I now send Lc in 2 bytes ??The card you have is Java Card 2.2.1 which does not support extended length APDU's. As such your only choice is to implement chaining. This is also the reason why your code does not compile in Eclipse. You are building against the JC2.2.1 libraries.
Here is some code that may help you get started. This code is not tested (apart from the fact it compiles) as I am not at work at the moment. This code comes with all the standard disclaimers and may not be fit for purpose... so use at your own risk :) There is still more validation that could go in (such as checking that the GET-RESPONSE command has the same CLA byte etc). Hopefully this code works and gets you started with command and response chaining. This may also help anyone else that needs to do something similar. If this can help just one person I will be happy.
Cheers,
Shane
package chaining;
import javacard.framework.APDU;
import javacard.framework.Applet;
import javacard.framework.ISO7816;
import javacard.framework.ISOException;
import javacard.framework.JCSystem;
import javacard.framework.Util;
* Very simple applet for chaining data to and from a card.
* @author shane
public class ChainingApplet extends Applet {
private final static byte INS_GET_RESPONSE = (byte) 0xC0;
private final static byte INS_PUT_DATA = 0x00;
private final static byte INS_GET_DATA = 0x01;
private final static byte OFFSET_SENT = 0x00;
private final static byte OFFSET_RECV = 0x01;
private static short[] offset;
private static byte[] fileBuffer;
private static short fileSize = 0;
private final static short FILE_SIZE = 2048; // 2KB file
private final static short MAX_APDU = 255;
* Default constructor that initialises all memory to be used by the applet.
public ChainingApplet() {
offset = JCSystem.makeTransientShortArray((short) 2, JCSystem.CLEAR_ON_RESET);
fileBuffer = new byte[FILE_SIZE];
* {@inheritDoc}
public static void install(byte[] bArray, short bOffset, byte bLength) {
// GP-compliant JavaCard applet registration
new ChainingApplet().register(bArray, (short) (bOffset + 1), bArray[bOffset]);
* {@inheritDoc}
public void process(APDU apdu) {
// Good practice: Return 9000 on SELECT
if (selectingApplet()) {
return;
short len = apdu.setIncomingAndReceive(); // This is the amount of data read from the OS.
byte[] buf = apdu.getBuffer();
byte cla = buf[ISO7816.OFFSET_CLA];
byte ins = buf[ISO7816.OFFSET_INS];
short lc = (short) (buf[ISO7816.OFFSET_LC] & 0x00ff); // this is the LC from the APDU.
// get all bytes from the buffer
while (len < lc) {
len += apdu.receiveBytes(len);
// validate the INS byte (basic check that tests for valid GET-RESPONSE or GET-DATA)
if (offset[OFFSET_SENT] > 0 && ins != INS_GET_RESPONSE) {
ISOException.throwIt(ISO7816.SW_CONDITIONS_NOT_SATISFIED);
} else if (ins == INS_GET_RESPONSE && offset[OFFSET_SENT] == 0) {
ISOException.throwIt(ISO7816.SW_CONDITIONS_NOT_SATISFIED);
switch (buf[ISO7816.OFFSET_INS]) {
case INS_PUT_DATA:
saveData(buf, ISO7816.OFFSET_CDATA, offset[OFFSET_RECV], len);
if ((cla & 0x10) != 0x00) {
offset[OFFSET_RECV] += len;
} else {
// last command in the chain
fileSize = (short) (offset[OFFSET_RECV] + len);
offset[OFFSET_RECV] = 0;
break;
case INS_GET_DATA:
case INS_GET_RESPONSE:
sendData(apdu);
break;
default:
// good practice: If you don't know the INStruction, say so:
ISOException.throwIt(ISO7816.SW_INS_NOT_SUPPORTED);
* Simple method to save the data somewhere. Add real implementation here.
* @param source
* buffer containing data to copy
* @param sourceOff
* offset into source buffer to the data
* @param destOff
* offset into the destination buffer
* @param len
* length of the data to copy.
private static void saveData(byte[] source, short sourceOff, short destOff, short len) {
// prevent buffer overflow
if ((short) (destOff + len) > FILE_SIZE) {
ISOException.throwIt(ISO7816.SW_FILE_FULL);
Util.arrayCopy(source, sourceOff, fileBuffer, destOff, len);
* Simple method to send chainined data to the client application (if required).
* @param apdu
* current APDU
private void sendData(APDU apdu) {
// work out how many bytes to send this time and how many will be left
short remain = (short) (fileSize - offset[OFFSET_SENT]);
boolean chain = remain > MAX_APDU;
short sendLen = chain ? MAX_APDU : remain;
// Get ready to send
apdu.setOutgoing();
apdu.setOutgoingLength(sendLen);
apdu.sendBytesLong(fileBuffer, offset[OFFSET_SENT], sendLen);
// Check to see if there are more APDU's to send
if (chain) {
offset[OFFSET_SENT] += sendLen; // count the bytes sent
ISOException.throwIt(ISO7816.SW_BYTES_REMAINING_00); // indicate there are more bytes to come
} else {
offset[OFFSET_SENT] = 0; // no more bytes to send
} -
Can I convert a Word Document into PDF without buying the yearly package. I just want to do it one time?
Hi dianna50,
If you did decide to purchase a subscription to PDF Pack and give it a go, you are able to cancel within 30 days and get your money back. Adobe also offers a free 30-day trial to Acrobat, which not only lets you create PDF files, but edit them as well.
If you decide to give it a try and need help with anything, please let us know.
Best,
Sara -
InputStream and playback more than one time
Hi,
I'm trying to playback multiple times the sound I captured with microphone.
But the method playAudio() manage to listen to the sound just one time. Which way can I use to listen many times the sound ??
I don't want to use Clip !!!!!
Here is my code :
public void captureAudio() {
try {
final AudioFormat format = getFormat();
DataLine.Info info = new DataLine.Info(
TargetDataLine.class, format);
final TargetDataLine line = (TargetDataLine)
AudioSystem.getLine(info);
line.open(format);
line.start();
Runnable runner = new Runnable() {
int bufferSize = (int)format.getSampleRate()
* format.getFrameSize();
byte buffer[] = new byte[bufferSize];
public void run() {
out = new ByteArrayOutputStream();
running = true;
try {
while (running) {
int count =
line.read(buffer, 0, buffer.length);
if (count > 0) {
out.write(buffer, 0, count);
out.close();
} catch (IOException e) {
System.err.println("I/O problems: " + e);
System.exit(-1);
captureThread = new Thread(runner);
captureThread.start();
} catch (LineUnavailableException e) {
System.err.println("Line unavailable: " + e);
System.exit(-2);
if(!running){running = true;};
public void playAudio() {
try {
byte audio[] = out.toByteArray();
InputStream input =
new ByteArrayInputStream(audio);
final AudioFormat format = getFormat();
final AudioInputStream ais =
new AudioInputStream(input, format,
audio.length / format.getFrameSize());
DataLine.Info info = new DataLine.Info(
SourceDataLine.class, format);
final SourceDataLine line = (SourceDataLine)
AudioSystem.getLine(info);
line.open(format);
line.start();
Runnable runner = new Runnable() {
int bufferSize = (int) format.getSampleRate()
* format.getFrameSize();
byte buffer[] = new byte[bufferSize];
public void run() {
try {
int count;
while ((count = ais.read(
buffer, 0, buffer.length)) != -1 && !running) {
if (count > 0) {
line.write(buffer, 0, count);
line.drain();
line.close();
} catch (IOException e) {
System.err.println("I/O problems: " + e);
System.exit(-3);
playThread = new Thread(runner);
playThread.start();
} catch (LineUnavailableException e) {
System.err.println("Line unavailable: " + e);
System.exit(-4);
}ThanksI play it back the first time correctly. But if I stop it before the end or let it playing until the end, I'm unable to start it again when I click on the play button.
Here is a piece of the whole code (more than 7500 characters):
class Lecture extends JFrame
private AudioInputStream lecteurAudio;
private AudioFileFormat formatFichier;
private AudioFormat format;
private SourceDataLine line;
public boolean running;
private Thread captureThread;
private volatile boolean exitRequested;
private volatile boolean isPaused;
private volatile boolean isCancelled;
public Lecture()
running=true;
public void AudioFromFile(File fichier) throws UnsupportedAudioFileException, IOException, LineUnavailableException
this.lecteurAudio = AudioSystem.getAudioInputStream(fichier);
this.formatFichier = AudioSystem.getAudioFileFormat(fichier);
this.format = lecteurAudio.getFormat();
if((this.format.getEncoding() == AudioFormat.Encoding.ULAW) ||
(this.format.getEncoding() == AudioFormat.Encoding.ALAW))
//convertion du format
AudioFormat tmp = new AudioFormat(
AudioFormat.Encoding.PCM_SIGNED,
this.format.getSampleRate(),
this.format.getSampleSizeInBits() * 2,
this.format.getChannels(),
this.format.getFrameSize() * 2,
this.format.getFrameRate(),
true);
this.lecteurAudio = AudioSystem.getAudioInputStream(tmp, this.lecteurAudio);
this.format = tmp;
DataLine.Info info = new DataLine.Info(
SourceDataLine.class,
this.lecteurAudio.getFormat(),
((int)this.lecteurAudio.getFrameLength() *
this.format.getFrameSize()));
line = (SourceDataLine)AudioSystem.getLine(info);
line.open(format);
line.start();
if (line != null) {
try {
line.close();
} catch (Exception e) {
public void Piste()
DataLine.Info info = new DataLine.Info(SourceDataLine.class, this.lecteurAudio.getFormat());
try {
if (line == null) {
boolean bIsSupportedDirectly = AudioSystem.isLineSupported(info);
if (!bIsSupportedDirectly) {
AudioFormat sourceFormat = lecteurAudio.getFormat();
AudioFormat targetFormat = new AudioFormat(
AudioFormat.Encoding.PCM_SIGNED,
sourceFormat.getSampleRate(),
sourceFormat.getSampleSizeInBits(),
sourceFormat.getChannels(),
sourceFormat.getChannels() * (sourceFormat.getSampleSizeInBits() / 8),
sourceFormat.getSampleRate(),
sourceFormat.isBigEndian());
lecteurAudio = AudioSystem.getAudioInputStream(targetFormat, lecteurAudio);
format = lecteurAudio.getFormat();
line = getSourceDataLine(format);
line.open(format);
} catch (Exception e) {
e.printStackTrace();
return;
Runnable runner = new Runnable(){
int nRead = 0;
byte[] abData = new byte[(int)format.getSampleRate()* format.getFrameSize()];
boolean startResume;
public void run(){
do {
startResume = false;
line.start();
while (nRead != -1 && !exitRequested) {
try {
nRead = lecteurAudio.read(abData, 0, abData.length);
} catch (IOException e) {
e.printStackTrace();
if (nRead >= 0) {
line.write(abData, 0, nRead);
if (exitRequested && !isPaused) {
//cancel
line.stop();
line.flush();
} else if (isPaused) {
line.stop();
line.drain();
try {
while (isPaused) {
Thread.sleep(20);
startResume = true;
} catch (InterruptedException ex) {
//if interrupted...
cancel();
} while (startResume);
captureThread = new Thread(runner);
captureThread.start();
private SourceDataLine getSourceDataLine(AudioFormat format) {
Exception audioException = null;
try {
DataLine.Info info = new DataLine.Info(SourceDataLine.class, format);
Mixer.Info [] arr = AudioSystem.getMixerInfo();
Arrays.sort(arr, new Comparator() {
public int compare(Object o1, Object o2) {
Mixer.Info m1 = (Info) o1;
Mixer.Info m2 = (Info) o2;
if("Java Sound Audio Engine".equals(m1.getName()))
return -1;
if("Java Sound Audio Engine".equals(m2.getName()))
return 1;
return 0;
for (Mixer.Info mi : arr) {
SourceDataLine dataline = null;
try {
Mixer mixer = AudioSystem.getMixer(mi);
dataline = (SourceDataLine) mixer.getLine(info);
dataline.open(format);
dataline.start();
System.out.println(mi.getName());
return dataline;
} catch (Exception e) {
audioException = e;
if (dataline != null) {
try {
dataline.close();
} catch (Exception e) {
} catch (Exception e) {
throw new IllegalStateException("Error trying to aquire dataline.", e);
if (audioException == null) {
throw new IllegalStateException("Couldn't aquire a dataline, this computer doesn't seem to have audio output?");
} else {
throw new IllegalStateException("Couldn't aquire a dataline, probably because all are in use. Last exception:", audioException);
public boolean isPaused() {
return isPaused;
public void setPaused(boolean pause) {
if (line != null) {
if (pause) {
isPaused = true;
exitRequested = true;
} else {
isPaused = false;
exitRequested = false;
public void cancel() {
isPaused = false;
exitRequested = true;
isCancelled = true;
public boolean isCancelled() {
return isCancelled;
public void close() {
if (line != null) {
line.close();
}Edited by: bascyr on 8 mai 2010 16:29 -
How to create one time pop-up window?
I'd like to have a pop-up window called "how to use this app" show up just one time; the first time a user opens the folio to read it for instruction but then not appear again after it is closed. How could I do this? Thanks.
I have not tried the "alert-box technique" yet.
I have found code that will only display for first time visitors. How would I add an image to the below code with a link to a website?
newwin=open("yourpage.htm", "dispwin",
"width=350,height=350,scrollbars=no,menubar=no"); -
One time Discount Coupon to be used during the Sales Order Creation
I need help to configure a one time coupon to be used during a Sales Order creation. During 2009 our customers that have purchased more than certain amount we are going to give them a discount Coupon with a code that they can use just one time during his next purchase. I need help to configure this request.
ThanksHi Gilberto
Go VK11.
After maintaining the material & price, please go to -->Additional data.
You will be displayed with Validity, Assignments, Assignments for retail promotion, Limits for Pricing, Payments.
In the 'Limits for Pricing' you have three options - Max. condition value, Max number of orders & Max condition base value.
In the Max number of Orders - enter 1 to avail this special price only for first order.
Importent Note: to activate the ' Limit of Pricing' -- you need to tick 'Condition update' for the particular contion type, in condition type customising.
FOr eg. condition type - ZR00 - you need to have special price for this condition type & want to limit only for first order order.
In the customising for ZR00 - 'condition update' need to be ticked, then only you can get the above option.
i hope it is clear to you
thank you
Anirudh -
Just one filter for queries on workbook
Hi all,
In a workbook i have three queries with a common free characteristic. What can i do to have just one filter on the workbook for the three queries ?.
thanks a lotAnd how to create a common variable for 3 query??
Is the same variable will be understand by all query if we have just one insetion (the user inter the variable just one time) because it is common?
very interesting
thank tc -
I need write code executable at one time defined
I need write a code what a one time defined trigger a pl/sql, i know that command exist but in this moments not remember this command please help me.
ThanksI am not sure if this is what you are looking for, but you can add a section at the end of a package body that will be executed one time only, when the package is first invoked within the user session. Although it must be placed at the end of the package body, it will be executed just one time before anything else in the package is executed. Here is an example:
SQL> CREATE OR REPLACE PACKAGE test_one_time_only
2 AS
3 PROCEDURE every_time;
4 END test_one_time_only;
5 /
Package created.
SQL> CREATE OR REPLACE PACKAGE BODY test_one_time_only
2 AS
3 -- this will execute every time:
4 PROCEDURE every_time
5 IS
6 BEGIN
7 DBMS_OUTPUT.PUT_LINE ('every time');
8 END every_time;
9
10 -- this will execute one time only:
11 BEGIN
12 DBMS_OUTPUT.PUT_LINE ('one time only');
13
14 END test_one_time_only;
15 /
Package body created.
SQL> SET SERVEROUTPUT ON
SQL> EXEC test_one_time_only.every_time
one time only
every time
PL/SQL procedure successfully completed.
SQL> EXEC test_one_time_only.every_time
every time
PL/SQL procedure successfully completed.
SQL> EXEC test_one_time_only.every_time
every time
PL/SQL procedure successfully completed. -
i-phone3 wont recharge; initially home button wouldn't work. Applied the 'auto-touch button thing' via settings. This worked until I ran out of battery life. Now it won’t recharge either via laptop (usually does) or wall switch. Just a blk screen.
In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt -
Can I restore just One Application through time machine? (vs. Migration)
Hi. I've reformatted my Mac
Instead of Migration Assistant
I want to restore just ONE application (Microsoft Office)
1. I've plugged in my Time Machine
2. Time Machine is Not Configured
3. I Browse Other Time Machine Disks
4. I Use Selected Disk
5. I go to my latest Restore pane
6. I click around until I find the Application Folder
7. I click on Microsoft Office, and I press Restore
Am I doing it correctly? Or am I simply just Drag and Dropping into my Application Folder on my newly reformatted Mac?
Thanks in advance.That's probably not going to work. When you installed Office, it almost certainly installed other files in other places, and perhaps some "helper" apps, in addition to the main app. Unless you know what and where all those things are, and restore them, too, it's not likely to work well, if at all.
See [Transferring Applications|http://web.me.com/pondini/AppleTips/TransferApps.html] for details.
Your best bet is to reinstall it from the original disc. -
What's with the monthly subscription? Can we no longer just buy the program as a one-time fee?
Yes you can, but they have made it very confusing as to that option (trying to get folks to use subscription -- please let them know what you think of this policy). The link is at http://www.adobe.com/products/catalog/software._sl_id-contentfilter_sl_catalog_sl_software _sl_mostpopular.html. The default is the subscription, but if you click on the "I want to buy" drop down list there is both the full and upgrade versions available. It is so confusing that if you don't know it is available you would probably never find it. I did not find it until some other MVPs pointed it out and several of us have complained.
-
I have an epson xp600 and a mac book pro. Wireless printing is OK if I'm lucky for one time only then a 'failed to connect' message so I have to delete and re add the printer to get it working again (but just once!) then the same occurs. Why?
I am not certain this will fix your problem but I suggest you assign the printer a static IP address.
Using the printer's front panel, select Menu > Network > WLAN > TCP/IP > Boot method, and change it to "static". Provide a static IP address that is on your LAN's subnet.
For example, if you are using an AirPort Extreme, you might give it an IP address of 10.0.1.100. If you are using a Netgear or Linksys router that defaults to issuing 192.168.x.x addresses, you might give it an address of 192.168.1.100. That way, the printer will always "reside at the same address" on your network. If your router has the ability, you should reserve that address so that the router does not attempt to assign it to another DHCP device.
Then, go to System Preferences > Print & Scan, and delete your existing printer with the "–" (minus) button. Add it again, using the "+" (plus) button. In the window that appears, select the IP pane, and from the Protocol menu select "Line Printer Daemon (LPD)". In the Address field type the IP address you gave your printer.
If all goes well the "Pring Using" field will detect the printer at that address and automatically select the appropriate driver. You will see something similar to the following screenshot ("name" can be whatever you decide, and "location" is optional):
Click Add, then you can close System Preferences.
There are other possible reasons your printer is "not responding" which could include wireless interference from competing wireless networks, but try this "static IP" method first. It should mitigate the problem. -
When i start Firefox ( 5.0.1 ) it loads the home page fine but along with it, it starts playing a video i watched earlier on youtube and it is invisible ( no where in tabs ) and i can just hear the sound. After playing the video one time it stops.
Sorry you are having problems. First of all try Fifrefox's safemode.
*[[Troubleshoot Firefox issues using Safe Mode]]
If that works post back for further advice.
Next step, if safe mode did not work.
<u>First: Try a clean install, <sub>(you have had a none standard version installed previously)</sub></u><br /> that involves deleting the program files. Then if necessary try troubleshooting by creating and using a clean empty Firefox profile.
See
* this recent post [/questions/940399#answer-377134]
* http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
<u>Second: try a New Profile</u>
*http://kb.mozillazine.org/Profile_Manager#Creating_a_new_profile
* this will be an additional profile, it is still worth backing up any existing or currently working profile on a regular basis
**[[Back up and restore information in Firefox profiles]]
* Until you are absolutely confident about the repercussions I suggest
** always use an empty folder when creating a new profile
** never delete or rename profiles, just disable or remove shortcuts
** after creating a new test profile open it and check for any addons or plugins that may be have been included by default
Maybe you are looking for
-
How can i Restore Photo's from my previous Iphone 4s icloud back up!!!
Hello guys i am new to apple discussion but here goes... last month i had to get my iphone 4s replaced but before i did i made a back up on icloud, when i go on icloud on my new iphone, then go to manage storage it says i have 2 back ups, 1 from
-
Error while updating AD attributes-OIM 11G
Hello All, I changed the expiration date value in user table and the associated change task is propagating the change to AD User process form, BUT the Account Expiration Updated task failed and it throws the below error. Similarly for all the attribu
-
I am having problems with Facebook.
Two days ago we switched our internet company over from Hughes Net to Century Link. When we had Hughes Net, Facebook worked perfectly fine, other than it being slow simply because Hughes Net sucks. Now that we have Century Link, I decided to update t
-
Is there a size limit to the document? I have been trying to convert a pdf to excel without success
-
How to restore iMac to an earlier date through time machine?
how to restore iMac to an earlier date through time machine?