E63 - Win 7 Prof (64 bit OS) - Ovi Contact sync er...

Hi All,
While iam trying to sync my phone with Ovi suite ..getting .. Sync error 80043aberror. Detail of my hand set and laptop operating system are
E63,Installed Nokia Ovi Suite 3.1.0.91 (Latest version)Windows 7 Professional64-bit Operating System
Music, Message, Photos all syncing but contact are not syncing shows above mention error code.. As in Ovi support site advice
http://support.ovi.com/osc/en_GB/service/ovi_on_your_computer/faq/FA134956_en_US
followed the instruction.. but no luck.. still iam facing same issues.. Could please some one assist me to resolve this issues.
Regards,Arathnas

Thanks a lot for your reply..
To rectify the issue followed as you mention..no luck..Still facing same issue..
Contacts not synced
There was a problem with syncing your contacts. Please restart microsoft outlook. If this does not help try restarting Nokia Ovi Suit. If the problem still persists, repair Nokia Ovi Suite.
Error code: 80043ab4a
please find the attached screen snap shot for more information. Thanks
Regards,
Anguraj
Attachments:
Nokia Error Msg.jpg ‏198 KB

Similar Messages

Win 7 prof 64 bit RAM issues Lenovo G505s(59-379862)

I have purchased Lenovo Essential G505s(59-379862) (APU Quad Core A8 5550M- 8GB RAM- 1TB HDD- 15.6 Inches- DOS- 2.5GB Graph). and I have installed win 7 prof 64 bit on it . all drivers downloaded fm Lenovo website.
the issue is this in system configuration I see" total RAM 8GB(usable 7.2 GB) . why windows cant use full 8GB of RAM.
please help.
Thanks
Solved!
Go to Solution.

hi vikramarora42,
Welcome to Lenovo Community Forums!
This system has two GPU's
512 MB AMD Radeon HD 8550G (Integrated) and 2 GB ATI Sunpro HD 8570 Graphics (Dedicated)
This Less usable RAM i believe is because of Video Memory Sharing, Sharing part of the Memory to the Processor Integrated GPU.
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Photoshop CS3 crashes on startup in Win 7 Prof 64 bit

Hello everyone,
I'm not sure if this particular problem has been tackled before, if it has, I apologise in advance for double posting!
I have Photoshop CS3 as part of the Master Collection that I upgraded to from the old Macromedia Studio MX. But recently, Photoshop CS3 crashes on start-up and returns the following error: "Adobe Photoshop CS3 has stopped working"
I am running it on Windows 7 Professional 64-bit on a system with the following specs:
CPU: Intel® Core™i7 Processor Extreme Edition i7-975 (3.33GHz
RAM: 12 GB
Graphics Card: 2GB ATI RADEON™ HD 5970 PCI EXPRESS - DirectX® 11
HDD: 2x 500 GB
I tried running it under various compatibility modes, but alas, no luck - stops right at the same problem.
I've noticed that it crashes where the loading screen says 'building TWAIN Menus'. The software has been working without a hitch righ up until i tried installing my drivers for my old Dell all in one printer/scanner. These DID have compatibility issues, but I cant find it anywhere on my system to remove them. Or I might;ve removed them when applying a fix to remove it.
So I guess, it's the scanner software that is doing it. (hence I might've answered my own question).
Has anyone experienced this problem? perhaps even with thier own printer/scanners etc? Any ideas how this might be resolved?
Any advice or help would be appreciated, thanks in advance! :-)

John Joslin wrote:
You should be able to remove the drivers in Device Manager – or just uninstall the Dell all-in-one.
You can also disable the TWAIN plug-in by putting a tilde in front of its name.
Fantastic! Puting the tilde on the front of the twain plug-in has sorted it. At least it's working until I can get the drivers off. I tried disabling the drivers, no luck, tried removing from device manager, still no luck. Thats something I'll need to sift through the Dell forums for.
But thankfully, Photoshop now boot and works. Thanks guys!

Cloud Adobe Muse Install Errors - Win 7 Prof, 64-bit

Trying to install Muse, get the following errors, what should I do?
Exit Code: 6
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
----------- Payload: Microsoft Visual C++ 2012 Redistributable Package (x86) 11.0.61030.0 {873BE68F-480F-49A6-9649-F98CAB056AFC} -----------
ERROR: Third party payload installer vcredist_x86.exe failed with exit code: -2147024546
ERROR: Failed to install Microsoft Visual C++ 2012 Redistributable Package (x86). Please try installing it by double clicking on the executable at "C:\Users\[removed for privacy]\AppData\Local\Temp\{AB097B9E-04DD-4154-B9CC-1BCD67C9D7B5}\Muse_2014_3_CC_LS24\pa yloads\Microsoft VC 2012 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2012 Redistributable Package (x86) from Microsoft website - www.microsoft.com (I tried repairing this and get errors there too)

Errors "Exit Code: 6," "Exit Code: 7"
Mylenium

OVI Contacts sync with Outlook

Hi,
Is there a way to import my contacts entries from Outlook to the OVI application? I tried several times but it only works the opposite way round.
thanks,
stefan

I decided to try the latest PC Suite 7.1.18.0, same problem. Given that both Nokia suites use pretty much the same underlying PCSync utility, I suspect it was a glitch between PCSync and Outlook 2007 and the way the contacts are flagged/timestamped as you upgrade the versions of Outlook AND PCSync.
Initially I had synced my N78 contacts with the Switch tool from my E50. On the PC side, I upgraded from an older Outlook to Outlook 2007 AND to the new nokia suites. Seems that changing both software pieces at the same time is a no-no.
Manual merge (applies when you have few contacts - 150 in my case):
1. Create a new contacts folder on Outlook (say DummyContacts) and sync into it (one way) all your mobile contacts.
2. Then on Outlook 2007, copy & paste the contacts from DummyContacts into your primary Contacts folder. Make sure that "duplicate contact detection" is on before you cut & paste. Outlook will take you thru all the contacts that were updated on both sides, so that you can verify the conflicts. The notes field is appended to, so you'll have to edit any contacts with notes after the copy/paste.
3. Erase all contacts from your mobile, sync into it (one way) the contacts from Outlook.
After that, the 2-way sync seems to work, both with Ovi and PC suites.

Ovi Contacts Sync

I have an Ovi online account and I have had the sync setting sent to my device (Nokia 2730).
I have synced my contacts to Ovi online however, in the "Your Device" section at the bottom of the pop up box in red it says "Your device is partially configured. Please complete the configuration by synchronizing the device or remove it to add another."
It also states that my last sync was "Never" !
Why am I told that my device is "Partially Configured" and that I have never synced when I clearly have ? I can view the contacts online that I have uploaded from my device.
Does anyone have any idea as to what is going on ?
Many Thanks.
O2
Nokia 6303i

yes me too but in addition to the device section states to no device and when i tried to unsubscribe and resubscribe by my nokia e72 ovi sync app it did synced successfully but when i logon using my pc to ovi.com i found that my contacts (169 on my device) are added to the old ones (162) and created a contact list of 331 omg and i can't delete any one as some of these (169) contacts are
updated oh god i hate nokia and ovi
Nokia E72-1 Black
firmware : 053.001
of 26 of nov 2010

Win 7 Pro, 64 bit, with iTunes 10.4.1.10

I have iTunes 10.4.1.10 on Win 7 Professional, 64 bit machine. When syncing with my iPhone 3Gs, the iTunes "INFO" button yields blank screen. No text or information is shown. Worked just fine previously!

Hello nicolini,
It sounds like iTunes quits unexpectedly everytime you try to open it so you can no longer use it. I recommend the troubleshooting steps in the following article to help you troubleshoot the issue here, named:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
Start with these steps to open iTunes in Safe Mode to see if a 3rd party app may be interfering with iTunes. There is additional troubleshooting to be done in the article if this is not the case:
Start iTunes in Safe Mode
Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
Click Continue.
See if the issue you're experiencing persists in Safe Mode.
If you have the same issue while iTunes is in Safe Mode, proceed to the "Create a new user account" section. If you don't experience the same issue, follow these steps to remove third-party plug-ins.
Thank you for using Apple Support Communities.
All the very best,
Sterling

PSE 8 - win. 7 prof 64 bit - high res. - book?

A couple of questions here... Just ordered Photshop Elements 8 after purchasing new computer with Windows 7 Professional 64-bit. From what I read on MS, it will be compatible????
Will PSE 8 be able to utilize all of the features of
a) Windows 7 Prof 64-bit and
b) my computer's high resolution of 1920 x 1080???
I ask because I have issues with some older programs having fuzzy text, and want to make sure that photographs will show up with their best resolution and quality for accurate editing.
(I also ask if anyone recommends a good instructional manual/book for PSE that would teach various step-by-step directions for editing in PSE up to or thru version 8?)
Thanks everyone.
ramacorky

PSE 8 should run fine on Windows 7 64-bit. Regarding 64-bit, see this FAQ:
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_PSE_and_Vista
PSE will use a 1920 x 1080 monitor just fine.
Re a good book, many people like Barbara Brundage's "This Missing Manual"; Barbara frequently posts here.

32 bit wine install on 64 bit

I want to install wine on 64 bit computer. Because wine is for 32 bit
I have searched the forums. The solution mentioned was to make multilib
But How to make multilib. Can some one give a detailed list of commands to follow. And with some explanation.
Last edited by sant527 (2009-08-03 06:08:03)

actaully you dont need yaourt to build it. bin32-wine uses a multilib system , The package install all the 32bits version of the libs on your computer. If you have an nvidia card you will have to install lib32-nvidia-utils for 3d stuff.
Or you can use a chroot like ngoonee mentioned , with a chroot you install a 32bits install on your pc. It's fairly easy to setup a chroot using the guide. The main profit of a chroot is that you can run 32bits only linux apps in it too.

OS : Win XP Prof SP3 ... with Recovery Media for Win 7 Prof

i. 2nd attempt. The 1st didn't show.
ii.This is my first post in this forum, so I'm not sure whether email Notification is automatically sent if there's a reply.
iii. On Nov 22, 2010, I contacted Toshiba pre-sales Support for info on the same subject. I haven't received a response yet.
Hello;
1) I'm about to buy a new Toshiba laptop:
.... Toshiba TECRA A11-S3540
.... OS : Win XP Prof SP3
......... : with recovery media for Win 7 Prof
.... Processor : Intel Core i7 - 620M
.................. : 2.66 GHz / 3.33 GHz with Turbo boost
2) What is particularly attractive about this model (at least on paper and as I interpret its specs) is that it comes with Win XP SP3 OS, and I can upgrade to Win 7, if I choose to and at my convenience, with what appears to be a minimum hassle.
3) I have reviewed Jim's article at:
http://forums.toshiba.com/t5/System-Recovery-and-Recovery/Recovery-media/m-p/9148#U9148
but still have some basic questions, and I'd very much appreciate your help:
a--> What does " ... with recovery media for Win 7 Prof" really mean ??
b--> What does it include ??
c--> Does the laptop come with Win 7 OS software pre-stored on the HD ??
d--> Is there a time limit for installing Win 7 on the unit ??
e--> What if 6-12 months after purchasing the laptop, tried to install Win 7 and it failed and I ended up with NO OS ??
f--> Can I go back safely to the Win XP Prof SP3 OS ??
g--> Does Toshiba consider failure to install Win 7 as a major malfunction and would replace the unit at no cost within the provided 3-yr warranty ??
Your comments and advice would be gratefully received.
Kind regards.
Solved!
Go to Solution.

Tecra M11-S3450
I'll take another shot, Monir (with the same proviso that I'm probably not the best one here to reply).
d. Does it mean the unit comes with the 2 versions of Windows 7 (the 32 and the 64 bit) pre-installed ??
e. Can one choose which of the 2 Win 7 version to use ??
f. Let us say the laptop comes with the Win 7 32-bit version:
g. What does " ... with Windows XP Professional downgrade" really mean ??
h. Does it mean the Win XP OS software is there if you want to downgrade from the pre-installed Win 7 ??
i. Does it mean ONLY the option to downgrade from Win 7 is there, but one has to buy Windows XP OS if he wants to install it ??
d&e. My guess is that when the laptop arrives, you'll have the opportunity when you first boot to choose which version to put on the hard drive. They are stored in another (hidden) partition on the same drive.
g&h. It means the same as before (except this time for Windows XP), that there are recovery discs included which enable you to restore the hard drive to Windows XP.
i. Everything is included. You don't have to buy anything.
-Jerry

Getting error while installing sql server std 2008 R2 on win 7 prof. sp1 64bit

Hi,
I am getting error while installing sql server std 2008 R2 on win 7 prof. sp1 64bit. I have already tried all option but fail to installation
an error during the installation of assembly micro soft.vc80.crt

Hi,
I am getting error while installing sql server std 2008 R2 on win 7 prof. sp1 64bit. I have already tried all option but fail to installation
an error during the installation of assembly micro soft.vc80.crt
Can you please post summary.txt file here.Below link will help you in finding it.
http://technet.microsoft.com/en-us/library/ms143702(v=sql.105).aspx
Also with error you posted I guess it is a known issue .You need to install below package and then continue with fresh installation
http://www.microsoft.com/en-gb/download/details.aspx?id=15336
Please make sure before beginning fresh installation you make sure previous failed installation is removed completely.Use add remove program to remove failed SQL Server.If yu still face issue please post summary.txt file here
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

HP Officejet 6500 E709n Series on win 8.1 64 bit

I recently upgraded my computer to an asus desktop running win 8.1 64 bit. I cant get my officejet 6400n to install properly. I've tried uninstalling and reinstalling several times. It does recognize the printer and prints fine but the scanner doesn't work consistantly. I have no communication from the printer to the computer and cant scan over 100 dpi or the scanner freezes. I can only scan once and then the computer loses communication with the scanner and I have to restart printer and reboot system. This is getting old quick!

Hey @ehtoth ,
Thank you for taking the time to post on the HP Forums today! Hope you enjoy the experience.
I understand you are unable to scan consistently since upgrading to your new computer.
Please use the Print and Scan Doctor that HP has made available and see if it can fix the issue for you.
Click here to download and run the Print and Scan Doctor >>> www.hp.com/go/tools
If it doesn't fix the issue let me know and we can go from there. Have a great day!
I worked for HP.

I want to install windows7 on my 27in iMAC. I have an OEM version of Win7 which is win pro 7, 64 bit english. I will use boot camp to partion the hard drive for a win7 install. Can I use this version for the installation ??

My iMAC is a 2011 3.4 GHz intel i7 based with a 27in display. A year ago, I bought a Microsoft win pro 7 64-bit english OEM OS to install over a newly assembled AMD PC. I never installed it. Now, I want to put it on my iMAC using either Apple Bootcamp or Parallels. The win 7 OEM package has a lot of verbage about using an OEM preinstallation kit (OPK) and that it must be preinstalled on the hard drive. Is it OK to install this win7 version following the Bootcamp instructions.?
K6JPJ

Please post in the Boot Camp (not Bootcamp) forum I'm sure someone there can answer your quesiton if no one here is able to.

Is it possible to install win 8.1 (32 bit) in Intel(r)Core(TM)2 CPU 6300 @ 1.86 GHz 1.87 GHz /4 GB Ram 1333 MHz desktop

Is it possible to install win 8.1 (32 bit) in Intel(r)Core(TM)2 CPU 6300 @ 1.86 GHz 1.87 GHz /4 GB Ram 1333 MHz desktop.
Thanks.

Is it possible to install win 8.1 (32 bit) in Intel(r)Core(TM)2 CPU 6300 @ 1.86 GHz 1.87 GHz /4 GB Ram 1333 MHz desktop.
Thanks.
Could be possible, but you ask this question to persons who probably think they know it and guess.
Ask this in the End User Forum for this problem
http://answers.microsoft.com
Success
Cor

Lastpass doesn't install into firefox 18. I'm using win 8 pro 64 bit.

I have ie 10, firefox 18, and the latest version of chrome on my win 8 pro 64 bit os. I first used the universal installer for lastpass password manager to install lastpass on all my browsers. It showed up fine in ie and chrome but there was no sign of it in firefox 18. I checked the toolbars under the view tab and there was no sign of it. I've been using lastpass for about 1 1/2 yrs now and this is the first time it didn't show up in one of the browsers. I tried reinstalling using the universal installer and I also tried just installing it in firefox through the addons. There is still no sign of it. If you know what is causing this , I would like to know. Thank-You......John MacKinnon

Same problem, Windows 7, 32 bit, Firefox 18.0.

E63 - Win 7 Prof (64 bit OS) - Ovi Contact sync er...

Similar Messages

Maybe you are looking for