E63 Wlan not connected - but connected??

Hello,
I just updated my E63 to the newest software version (200.21.012 ) and im experiencing issues with the WLAN...
When i connect first time to a WLAN access point, it doesnt work, but then after disconnecting, the icon is still there. Under the connection manager list, there is no active connection, but i cannot use any internet based applications because it says i am already connected. Any help?
Thanks 

Another program is still using the connection. Like Facebook, Nokia Messaging, Mail for Exchange, etc........ Press the home button for a few seconds to see whitch apps are active.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Similar Messages

  • AnyConnect ... not connected but connected

    Hi! One interesting thing I noticed today -- AnyConnect (was connected some ... 8 hours) show no connection, but connection still there!
    Alar.

    This can provide clues as to a fragmentation issue in the network. Consumer routers are particularly poor at packet fragmentation and reassembly.
    Try a scaling set of pings to see if it fails at a certain size. For example, ping -l 500, ping -l 1000, ping -l 1500, ping -l 2000.
    It is recommended that you configure a special group for users that experience fragmentation, and set the svc mtu for this group to 1200. This allows you to remediate users who experience this issue but not impact the broader user base.

  • WLAN not able to connect to WIFI k3 note

    Dear MY WIFI was connecting earlier, but now it is not connecting. Though WIF network is identified. When selected and given passowrd it not able to connect.model K50T5android ver 5.0BUILD VER = vibeui_v2.5_1512_5.495.1_ST_K50-T5. Need genuine and urgent solution. Regards 

    Hi
    That is a corportate office network so i won't be able to see the ip settings and all for this wireless network.
    Chandu Singh
    Chandu Ramabharathi
    Finland

  • Photosmart all in one 7510 not recognized but connected to wireless

    I have a NETGEAR Router, WNDR3800.  It is a dual band router running both a 5GHz and 2.4GHz network.  I have never been able to maintain a working connection to the printer.  After I reload the printer onto the known printers for the Mac, if the printer goes idle I am never able to re-establish the printer for use.
    The mac and the printer are both connected to the same 2.4GHz network.
    The network has WPA2-PSK [AES] security enabled
    The network configuration page shows the network status as ready with Bonjour enabled
    The Mac has never been able to pick up the printer wirelessly. I have always had to set it up via USB connection to get the Mac and printer to talk to each other.  The printer will join the wireless network without the Mac, however, if i complete the process that way then the Mac will never see the printer.
    Recenty updated to OS X Mavericks. Printer would not work although shows the status above.  Downloaded new drivers for the OS X update.  When running the HP utility to set up the printer, it was not recognized on the network. (reverified both were connected to the same 2.4Ghz network).  Attempted to connect via USB.  When establishing the network configuration for the printer on the HP Utility via the USB cable reveived an error message that stated the following (paraphrased):
    Your printer is connected to the network but is not recognized by your Mac check with hp print website help (essentially)
    I have reset the router and re-tried the above process. No difference
    I have reloaded all the software and restarted the mac and printer. No difference.
    I have manual assigned the IP Address for the printer and reserved the address on the router.  Re-attempted to connected wirelessly and via usb. No difference.
    I am at a loss as to what I can do next.  Not sure if it a router issue or printer issue but I have no other issues with any equipment on this router both establishing connections to and communicating between several other devices.  I would appreciate any help with this issue.

    Hello dan_man182 and welcome the HP Forums!
    I understand you're having an issue printing wirelessly. I can provide help for you.
    Follow this document please: 'Unable to Find Printer' Error Message Displays on the Computer During a Wireless Network Installati...
    Another tip I can give you is the security on your router. For some reason the connection may not like the WPA2-PSK [AES] security type. Try changing that to [TKIP] and see if that helps.
    Furthermore, if your 5.0Ghz is active, but you are not using it, try disabling the 5.0Ghz frequency altogether. There is a possibility it could interfere somehow.
    That is my personal thought on the matter, if you want a full detailed description on router settings you can refer to this: Suggested Router Configurations
    Source: VisionAiry
    Thank you for choosing the HP Forums! Let me know if that helps!
    GiGi10
    I used to work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the left to say “Thanks” for helping!

  • Share Screen not working but connecting to computer to see files does!?!!

    Hi
    Strange but I can see the computer I need to share screen with in my shared devices and I can "CONNECT AS" and see all my shared files but I CAN NOT share screen. It is properly enabled and share screen works with all my other networked computer.
    Any ideas what gives here???!!! Thanks for any suggestions!

    Same problem here, cannot login into a MacPro (10.6.4) from another MacPro (10.6.4), or from a MacBook (10.6.4), or from a MacBook Pro (10.6.4), all of them located in the same network (intranet).
    As the original post, I can mount discs remotely, even ssh into the destination machine, but screen sharing (or even the simple vnc) just does not work.

  • Networ to linksys g does not work but connects

    connect to secure linksys G router with WPA using webkey
    password accepted but does not connect just searches but lists network  with lock

    Go to Settings/Wi-Fi and tap the arrow to the right of the network to which you are connected. What is the IP? If it is 169... then unfortunately you are not connected to a network, your iPad is timing out and giving itself an IP because the router is not giving it one.
    If that is what is happening then give the router a kick in the can by resetting it to factory settings and then powering it down about five minutes before powering it up.
    While the router is powered down go to Settings/Wi-fi again and tell your iPad to forget the network. About two minutes after you have powered up the router go to Settings/Wi-Fi and tap Other... Enter the name of your network, select the form of password security the network uses and return and enter the password. Tap Join.

  • No wlan connection but connection shown

    After opening Mac book the symbol shows "no internet connection" with '!', but when flipped down the list, the network is listed and has check hook that log in is fine. But nothing can be reached, no internet and no router log in side. After disconnect and reconnect the log in is fine and all works.
    Was with Mountain lion and with Mavericks the same behaviour.
    Lease renewed, or this network canceld and new setup again made already. No change.

    Well, if it would be the network then all devices using that network would have the same problem. The router accepts all devices, no restriction. The password is not misspelled. So, where is the error? I have no idea where in the network a problem could be. (Working Hardware: in the network TV, iPad, iPhone 3Gs,4,4s, iPod touch, MacBook Pro, MediaStation )

  • Extreme antenna not visible, but connected to internet

    hi. i'm fully connected to the internet via airport extreme, but if i open the airport admin utility, it can't see nothing (i've 2 airport extreme and an express). why? what can i do? iTunes also miss the express and i cannot stream music...
    OS updated with sys update.

    are you connecting to the same router for the ethernet and wireless connections?

  • Configuring the time capsule airport wlan function as "connect to wlan", the time caspule gets a correct IP adress from the other wlans IP range, but does not assign this to the ethernet ports. With Airport Express it worked!

    Configuring the time capsule airport wlan function as "connect to wlan", the time capsule gets a correct IP adress from the other wlans IP range, but does not assign this to the ethernet ports. With Airport express it worked, the single Ethernet port got the IP Parameters passed through!
    My setup is a Vodafon Esaybox connected to ISP. Time Capsule is not able to extend the wlan of the easybox, neither airport express can do.
    Only the option "connect to wlan" is succesful.
    With airport express I was able to connect my Sony Bravia TV to the lan via ethernet to stream pictures, the TV set got an IP adress from the easybox.
    With the time capsule the easybox dosn't find devices connected to the ethernet ports to submit IP adresses. The TV set get another IP adress (169.xxx.x.x.) in subnet mask 255.255.0.0 and I don not now where from.
    My notebook is a MacBook pro.
    Any idea????
    Thank a lot in advance!
    Kind regards
    Ingo

    Neverthe less, could there be the chance, that this feature could be implemnented with an firmware update?
    That would appear to be a question for Apple to answer. You can make suggestions to Apple here:
    Apple - AirPort Extreme - Feedback
    If the AirPort Extreme and Time Capsule are configured to "extend a wireless network" they will provide additional wireless coverage....and...the Ethernet ports are enabled in this type of setup.
    The "catch" here is that you must have an Apple router providing the network to be extended.

  • Nokia C3-01 wlan is connecting but unable to brows...

    Hi ,
            I bought Nokia C3-01 touch and type model 5 days before, I  connected it through the wlan and it was successfully connected, but once i started browsing it show the msg after loading for few min as " the link is not found plz try after some times' ,but the page is opening while using gprs, plz help me to resolve the problem.

    I got Wifi working finally for Opera Mini on my Nokia C3-01 phone. It was working fine for browser and mail application though.
    I did the following.
    1) In Settings >> Configuration >> Def. config. sett.
    Delete all entries.
    2) Create a access point manually using Settings >> Configuration>>Personal Settings.
    It is necessary to create one. It will still work even though it is not pointing to real access point. Just point it to dummy Pack. data acc. pt. access point say "foo".
    3) Set the access point created in step 2 as Preferred acc. pt using Settings >> Configuration>>Preferred acc. pt
    4) Make sure you had set WLAN >> Internet Conn. to Ask first.
    Now apps like Opera Mini starts Asking for Access point whenever connecting to internet.
    It shows mutiple access point in the list. Usually the first one is your wifi access point and second one is the dummy access point you had as preferred access point.
    Using the above steps i am able to point wifi access point to access internet in all apps available in my phone. If you want to still access your gprs access point too then point the preferred access point created in step 2 to real gprs access point instead of "foo". Contact your operator to get configuration details for real gprs access point or check out how it is configured in your friends phone using the same operator as yours. Just make sure you are doing it manually and are not using the configuration profile sent by operator direcly to your phone. It blocks wifi access point access on your phone.
    My phone details are as follows:
    Nokia C3-01
    v 05.65
    26-11-10
    RM-640
    (C) Nokia MR1
    My operator:
    Vodafone IN
    The moral of the story is configure your access point manually.
    Do not use configuration setting provided by operator, they block access to wifi access point.
    I dropped configuration settings provided by my operator i.e Vodafone IN when i found that apps like opera mini are always connecting to gprs instead of wifi.

  • C3-00 WLAN option not available under connectivity...

    Hello, newbie here. i just  bought a C3-00 for my son to use. The only reason i purchased it is becasue it is supposed to have wifi, and it was $50 more than the phone i was going to get which does not have wifi, so i hope the extra money has not been wasted.
    The software version on  the phone is v3.65 26-01-11, RM-614.
    under connectivity there is no WLAN option.
    there is bluetooth, packet data, and usb data cable, but no WLAN option.
    the manual does not mention WLAN, but if i search online i see lots of people talking about using wifi.
    i thought it was because i was back  level, so i downloaded nokia software updater, and connected the phone to my laptop.
    it tells me that  3.65 is the latest software version even though the nokia support page says it's at 8.7.
    so i'm stuck.
    i can't update the software, and i don't have the WLAN option.
    can anybody help before i send the phone back??

    same problem.. I've just bought my C3-00 and I can use my home wlan connection but at university there is a wpa2 enterprise wifi network... I can see the network but I can't save/connect in it.
    People with other nokia models can connect in an easy way, how can I connect? I need another phone or I have just to change some hidden options?

  • The wi-fi on my ipod touch is connected but the internett is not working! Help

    Soo annoying, it's connected but the internett is not working. I don't know what to type in or what to do, so I need help.

    Are you 100% positive you are connected?  Head to Settings - Wi-Fi and tap the > next to the network you are connected to?  What is listed for an IP address?  If it's in the 169.x.x.x range, it means your iPod did not properly receive a valid IP address via DHCP from your modem/router. So the 169.x.x.x address is a self-assigned one.
    This can usually be resolved by a reboot of your router.  You can do this by unplugging it for about 30 seconds.  After it powers back up, try reconnecting it.  It wouldn't hurt to try a reset of your iPod as well.  To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
    See here for more troubleshooting suggestions.
    iOS: Troubleshooting Wi-Fi networks and connections
    B-rock

  • On 3G we cannot send emails from either our iPhones or iPad and this also happens with some WiFi connections but not all.  Yet we can always send emails from our Hotmail Email account.  What is causing this and what do we need to do to resolve it?

    On 3G we cannot send  Business emails from either our iPhones or Ipad and this also happens with some WiFi connections but not all.  Yet we can always send emails from our Hotmail Account using both 3G and WiFi.
    We bought the iPhones and Ipad so that we could send emails while we are out of the Office, but we are not able to do this unless we can find a WiFi connection. Incoming emails are fine.  We use IMAP, for Business emails just incase this is relevant and I know that Hotmail is POP3.
    Our technical IT knowledge is not great, so we look forward to your suggestions as to how to resolve this. 

    Contact whomever supports the email account and get the correct Outgoing email server settings from them.

  • I get wireless connection but my internet does not work on my ipad 2

    I get wireless connection but my internet does not work on my ipad 2

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?

    Hi
    I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?
    I have tried reseting the network settings and forgetting my wireless connection and re-connecting to it. I even backed up my phone on itunes and restored it, factory reseted it. Nothing seems to work.
    Also after my upgrade to ios 8.1 my personal hotspot option under cellular data has disappeared.
    Would you please help me out? I would really appreciate it.

    Hi..
    Restart your router then restart the iPhone to test.
    If that doesn't help, try this support article >   iOS: Troubleshooting Wi-Fi networks and connections

Maybe you are looking for