E65 and Best CallRecorder from Smartphoneware

Hi,
Has anyone managed to get the Best CallRecorder version 1.01 from SmartPhoneWare to work on their E65? I realize it is not on the supported phones list but I can get all there other software to work on the E65 apart from that one.
If anyone has/does, I would be really grateful if you could point out what the issue was that stops the phone from recording and makes all the recordings appear as "(0 seconds)" in the list of recorded calls. This is using the demo from http://www.smartphoneware.com.
Useful links: Phone firmware update | Nokia support site

I didn't know that piece of software. Maybe you can try Extended Recording from Psiloc:
http://shop.psiloc.com/en/Application,262240,Psiloc+Extended+Recorder
BR.
Bas

Similar Messages

Migration Assistant and best cables to trans. info from a Mac G4 to new iMac?

Baest Cables to use with Migration Assistant from a Mac G4 to new imac?

No you can not use a direct USB to USB connection. You can however use a USB External Hard Drive and copy your music, photos and other files from the G4 to the External Hard Drive, then from the External Hard Drive to the new iMac.
The best option is FireWire, followed by using an External Hard Drive, then an Ethernet connection to migration from the G4.
See > Mac OS X v10.6: How to use Migration Assistant to transfer files from another Mac

Best way to export and import data from an iPhone app?

How do people here prefer to export and import data from an iPhone app?
For example, suppose your app creates or modifies a plist. It might be nice to provide that plist to the user for separate backup and later allow them to re-import it.
How do people do that? Email the plist to an address? If so, how would one later get it back in?
Is there a common way people do this kind of thing?
Thanks,
doug

Or maybe the best approach for this is some sort of file synchronization feature? Is there a way of having files from the app's filesystem automatically get stored on the computer's filesystem when synchronizing and vice-versa?
doug

What are some of the best iOS apps can remotely played videos, audios, photos and text files from a NAS hdd connected to Airport Extreme USB port? And how to configure this setup?

I have already set up NAS hdd as connecting it at USB port of Airport Extreme, i also want to remotely access it from iPhone, so what's the next step? What are some of the best iOS apps can remotely played videos, audios, photos and text files from the NAS hdd and how to configure this setup?

*Edit - I am not able to connect to the NAS when hardwired to the airport extreme.

I filmed several takes of the same scene for a movie. I trimmed the best clips from each take and put them into the project screen. However, I can't figure out how to make it flow seamlessly as one scene. Can someone please help me??

I filmed several takes of the same scene for a movie. I trimmed the best clips from each take and put them into the project screen. However, I can't figure out how to make it flow seamlessly as one scene. Can someone please help me??

1-800-676-2775 apple support tech support 1 800 275 2273
If your computer is on one minute before it freezes, than you have one minute to secure your serial number.
click the apple----->click about this Mac ------> click on version----> until you see the serial number. You may have to do this a couple of times if it freezes before you have all the numbers. A camera might help.
Good Luck

Can you suggest a best way to store and read arabic from oracle database?

Hi ,
can you suggest a best way to store and read arabic from oracle database?
My oracle database is Oracle Database 10g Release 10.1.0.5.0 - 64bit Production on unix HP-UX ia64.
NLS_NCHAR_CHARACTERSET AL16UTF16
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CHARACTERSET WE8ISO8859P1
I have presently stored the data in nvarchar2 field. But i am not able to display it correctly.

Using the national characterset should work but there are other factors that you have to consider when working with NCHAR/NVARCHAR2/NCLOB.
If possible, changing the characterset is usually the best solution if it's a possiblity for you.
For more info:
Dear Gurus: Can u pls explain the difference between VARCHAR2 & NVARCHAR2??

What's the 'best practice' way to get email and fax number from vendor?

Hello *,
could anybody let me know what the 'best-practice' is to get the fax number and smtp address from the vendor master? Is there a preferred function module I should use?
Thanks a lot,
Torsten

Hi ,
try that:
TYPE-POOLS: szadr.
DATA adr_kompl TYPE szadr_addr1_complete.
DATA adr1 TYPE szadr_addr1_line.
DATA adtel TYPE szadr_adtel_line.
DATA admail TYPE szadr_adsmtp_line.
DATA adfax TYPE szadr_adfax_line.
CALL FUNCTION 'ADDR_GET_COMPLETE'
       EXPORTING
            addrnumber              = lfa1-adrnr
       IMPORTING
            addr1_complete          = adr_kompl
       EXCEPTIONS
            parameter_error         = 1
            address_not_exist       = 2
            internal_error          = 3
            wrong_access_to_archive = 4
            OTHERS                  = 5.
* Mail
LOOP AT adr_kompl-adsmtp_tab INTO admail.
    MOVE admail-adsmtp-smtp_addr TO atab-mail.
ENDLOOP.
* fax
LOOP AT adr_kompl-adfax_tab INTO adfax.
    MOVE adfax-adfax-fax_number TO atab-fax_number.
ENDLOOP.
regards Andreas

What is the best app for identifying and removing duplicates from iPhoto Libraries/Pictures?

I have five iPhoto Libraries (original, default merged, etc.) I've tried using iPhoto Library Manager, but I seem to be digging a deeper hole. Also, question about the 15,000 faces: Are these taking up space on my hard drive? I gather I cannot easily remove them from libraries. Taking photos at concerts, sporting events, etc. just creates more faces in iPhoto; frankly, I could do without ANY FACE DETECTION!

These applications will identify and help remove duplicate photos from an iPhoto Library:
iPhoto Library Manager - $29.95
Duplicate Annihilator - $7.95 - only app able to detect duplicate thumbnail files or faces files when an iPhoto 8 or earlier library has been imported into another.
PhotoSweeper - $9.95 - This app can search by comparing the image's bitmaps or histograms thus finding duplicates with different file names and dates.
DeCloner - $19.95 - can find duplicates in iPhoto Libraries or in folders on the HD.
DupliFinder - $7 - shows which events the photos are in.
iPhoto AppleScript to Remove Duplicates - Free
PhotoDedupo - $4.99 (App Store) - this app has a "similar" search feature which is like PhotoSweeper's bitmap comparison. It found all duplicates
Duplicate Cleaner for iPhoto - free - was able to recognize the duplicated HDR and normal files from an iPhone shooting in HDR
Some users have reported that PhotoSweeper did the best in finding all of the dups in their library: iphoto has duplicated many photos, how...: Apple Support Communities.
If you have an iPhone and have it set to keep the normal photo when shooting HDR photos the two image files that are created will be duplicates in a manner of speaking (same image) but there are only twp apps that detected the iPhone HDR and normal photos as being duplicates: PhotoSweeper and Duplicate Cleaner for iPhoto. None of the other apps detected those two files as being duplicates as they look for file name as well as other attributes and the two files from the iPhone have different file names.
iPLM, however, is the best all around iPhoto utility as it can do so much more than just find duplicates. IMO it's a must have tool if using iPhoto.

HT5570 I have forgoten the security questions,i have tryed ewerithing to reset all of the instructions i have recived from the apple support team. I still can not reset the questions. Can some body please help me to reset them. Thank you and best regards

I have forgoten the security questions,i have tryed ewerithing to reset all of the instructions i have recived from the apple support team. I still can not reset the questions. Can some body please help me to reset them. Thank you and best regards

Since this is a user-to-user support forum, there isn't much we can do other than refer you to the following instructions and as noted in the instructions, then to Apple Support if you can't reset as shown in the instructions: If you forgot the answers to your Apple ID security questions

Whats the best way to transfer all my pic and vid files from Mac Air to back up drive to free up space on hard disk?

whats the best way to transfer all my pic and vid files from Mac Air to back up drive to free up space on hard disk?

Get a third drive if needed, open the Time Machine pane of System Preferences, set it not to exclude that drive, and drag the files to it. If you're moving an iTunes or iPhoto library, launch the application with the Option key held down and choose the moved library.
(118789)

I purchase iPhone 3GS and 4 and 4s from eBay and Amazone sometime from best buy all of that is ok but now befor 3 or 5 week I purchase one white iPhone 4s is locked and I can't active it i don't know why serial number c39****td0 Imei. 012936000039082

I purchase iPhone 3GS and 4 and 4s from eBay and Amazone sometime from best buy all of that is ok but now befor 3 or 5 week I purchase one white iPhone 4s is locked and I can't active it i don't know why serial number c39*****dtd0
<Personal Information Edited by Host>

Only the Apple Store sells unlocked iphones in the U.S

Best way to control and read data from multiple instruments?

Hello,
I'm building an application to test power supplies involving multiple pieces of equipment over a couple of different comm busses. The application will also send control instructions to some of the instruments, and read data from some of the instruments. The reading and control profiles will not run on the same schedule (variable length control steps, configurable read interval).
I was thinking of using a queued statemachine (producer/consumer) for the control profile and another to read the data, but I got concerned that there would be collisions between sending control commands and read commands to the same machine. Is there a suggested design pattern for implementing something like this?
Timing of the commands isn't critical down to the milisecond, but I need to collect reasonably accurate timestamps when the data is read. The same is true for the control commands.
Here are the instruments I'm going to use, if the are control, read, or both, and the communication method
Instrument Funtions Comm Method
Power Supply Read data Communicates to PMBus Adapter
PMBus to USB Adapter Read data USB (Non-Visa)
Switch control relays USB (VISA)
Power Dist. Unit read data/control outlets SNMP (Ethernet)
Electronic Load read data/control load GPIB (VISA)
Thermal Chamber read data/control temp Ethernet (VISA)
Thanks,
Simon

Hello, there is a template in LV called "Continuous measurement and Logging".
It can give you some idea how to properly decouple the "GUI Event handler" top loop (where your Event structure is) from the DAQ and other loops.
You do not need to totally replicate the above example, but you can find there nice tricks which can help you at certain points.
The second loop from the top is the "UI message loop". It handles the commands coming from the top loop, and regarding to the local state machine and other possible conditions and states, it can command the other loops below.
During normal run, the different instrument loops just do the data reading, but if you send a control command from the top loop to a certain instrument loop (use a separate Queue for every instrument loops), that loop will Dequeue the control command, execute it, and goes back to data reading mode (in data reading mode the loop Dequeu itself with a "data read" command automatically). In this way the control and data read modes happen in serial not in parallel which you want to avoid (but I think some instrument drivers can even handle parallel access, it will not happen in really parallel...).
In every instrument loop when you read a value, attach a TimeStamp to it, and send this timestamp/value couple to the DataLogging loop via a Queue. You can use a cluster including 3 items: Source(instrument)/timestamp/value. All the instrument loops can use the same "Data logging" Queue. In the Datalogging while loop, after Dequeue-ing, you can Unbundle the cluster and save the timestamp and data-value into the required channel (different channel for every instrument) of a TDMS file.
(Important: NEVER use 2 Event structures in the same top level "main" VI!)

WildStar and Best Buy's Terrible Customer Support

To Anyone Who Might Read This:
Because I can't seem to get a timely response from anyone through a private message in less than 3 days, because Best Buy phone reps feign ignorance and pass me along from rep to rep like a basketball (last call was for 88 minutes; 5 reps), and because at this point I feel as though my money has been stolen from me, I will resort to posting on your forums with the desperate hope of a reply.
Allow me to frame my comments with the backstory. On May 30, 2014, I purchased a download pre-order of WildStar Online. I paid for the full purchase of the game (59.99). According the Best Buy's online and instore adds, pre-ordering WildStar would give me several bonuses ingame, as well as access to the headstart weekend beginning on May 31. The full game edition would be released on June 3, but of course I had paid in full for the game, so I expected to recieve both the pre-order bonuses as well as the full game client.
According to both my receipt and the online add, I was to recieve the pre-order bonus code by email "shortly" after purchase. I did not. After several hours, I contacted Best Buy by phone, and I was assured that the email address on file was correct and that I should recieve my code soon. The following morning (May 31st), six hours after the headstart bonus I was supposed to recieve had already started, I still did not have any email from Best Buy. At that point, I found this forum, Best Buy Unboxed, and followed the instructions given by the moderators for just this issue. I sent two private messages to BBY which included my customer service pin and the rest of the required information, but by Saturday evening at 8p.m., I still had not recieved a response.
At this point, I called Besty Buy customer service again, as I was missing out on the pre-order bonus that I had paid for, in full, in advance, and had been guaranteed by Best Buy. The first four representatives I spoke to feigned ignorance and passed me along to the next, all with significant hold times. After 84 minutes, I was connected with a so-called online game specialist who told me my pre-order code would be sent to me within 24-48 hours. Perhaps you can see my dilemna here: 48 hours from that point would be approximately 9p.m. on Tuesday, June 2nd, 3 hours before the full release of the game. With registration and the client download, I would effectively miss out on the headstart bonus I WAS GUARANTEED WITH MY PREORDER FROM BEST BUY. And this is exactly what happened.
Once I finally recieved a response from Best Buy Unboxed and an email with my pre-order code, I was able to download and play WildStar for two days. On June 5, the WildStar client prompted me for game time credit, and would no longer allow me to access the game for play. 30 days of playtime comes with all editions of WildStar, so I was initially confused about the prompt, but after a little research I came to find out that Best Buy was supposed to send me two separate codes: A PRE-ORDER BONUS CODE "shortly" after purchase and a "RETAIL CODE" after release on June 3. I HAVE NOT RECIEVE THE RETAIL CODE, SO I CANNOT PLAY THE GAME I PAID BEST BUY IN FULL FOR IN ADVANCE!!!!!!
I sent a new private message about this problem to BBY on this forum yesterday morning (6/6/14), and I have still not recieved a response. Do you guys work on the weekends? I also sent a reply email to Best Buy, using the "reply to" address on the email that contained my pre-order bonus code, but I have still not recieved a response. I cannot think of a logical reason why I can't be given a response within 24 hours from Best Buy, particularly considering I have already paid in full for this product.
I am a long-time, loyal customer of Best Buy, but my confidence in your company has been shaken in recent years. Customer service, within your stores (particularly in Mississippi), is absolutely horrid. You representatives are not in the least bit knowledgeable, and do little more than hound customers for sales--if they aren't too busy huddled in electronics hiding from us. Phone support is equally terrible. I should not have to spend 88 minutes on a phone call and be passed from rep. to rep. to rep. to rep. until someone figurs out how to get an item to me that I have already purchased. It looks like I will now have to add Best Buy's electronic assistance to the list of my terrible customer service experiences, as a 2-3 day response time from you guy is absolutely ridiculous.
Since 2001-2002, I have spent literally tens of thousands of dollars at Best Buy. I have purchased televisions, vcrs, dvd players, blueray players, car stereos, computers, movies, video game consoles, console games, computer games, music, Keurigs, surround sound systems, an Ipad Mini, an ASUS pad.....I could go on and on. Considering my loyalty to your company, considering that the first place I want to go whenever we travel to a city that has a Best Buy is your store, considering all the money I have spent with you guys over the years.....this situation, your inability to get my the darn RETAIL CODE FOR WILDSTAR that I have already paid for, well, it just pisses me off to no end.
I am beyond frustrated. I feel as though Best Buy has stolen my money. Could you, actually would you (because I know you can) send me the merchandise that I have already paid for, and help to restore some of my faith in Best Buy?
Thanks.
TLR----Read the whole thing. You guys (BB reps) owe me that much, at least. It won't take a fraction of 88 minutes, I assure you.

Hello SEpowell,
Purchasing a digital download should be a quick, easy and painless process -- not a trying ordeal like you described -- so your frustration is certainly understandable. I'd be upset too if I found myself waiting an extended period of time for a product key, especially if there was any confusion regarding who might be able to help me find a solution.
I've sent you some information, so please make sure to check your private messages when you have the chance to do so. As always, you can check your PMs by signing into the forum and then clicking on the letter icon in the upper right-hand corner of the page.
For future reference, customers can typically expect a moderator response within 2-3 business days (not including weekends or major holidays). Sending duplicate private messages to multiple moderators will not result in a faster turnaround time. If you are in need of immediate assistance with a digital download, please call 1-888-BEST-BUY (1-888-237-8289) and ask to speak with our Digital Library team.
Aaron|Social Media Specialist | Best Buy® Corporate
Private Message

Sharepoint 2013: Problem / Error when creating Variation Hierarchy for French and German Languages from Variation root EN

Hi,
I have a website with English and Arabic Language Packs installed. I have the corresponding Variation heirachies created and the whole site collection is published.
Recently the client asked for french and german languages to be accomodated as well. So I followed the same approach I did for English and arabic (installed the language packs) for foundation, ran ocnfiguration wizard, installed server language pack &
ran configuration wizard.
But after creating the variation label, when i try to create the variation heirarchy, I am getting the following error.
"Unknown failure when creating a variation of page http://server:port/en/pages/default.aspx in label /fr/Pages/default.aspx.
The Variations Create Hierarchies job failed with the following error message& Unknown failure when creating a variation of site
http://server:port/en in label fr."
Am not sure what is going wrong. Appreciate a feedback.
Thanks,
SSP
SSP

Hi,
According to your description, my understanding is that the error occurred when you created the Variation Hierarchy for French and German Languages from Variation root EN.
I recommend to check the Resources folder located at C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15 to see if the file core.fr-FR.resx exists in the folder.
Here is a similar thread for you to take a look:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/611575b2-d129-44c6-814b-2e5782178850/unknow-failure-when-creating-variations-in-sharepoint-2013-is-this-a-bug-in-sharepoint-2013-rtm?forum=sharepointadmin
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Table Backup and Best Practice

Hi Guys,
We have 2 tables, master and child with millions of records in it.These tables gets populated from flat files that we receive from external systems.The major operation on this table are insert/delete(update). The way we do update is, if the record from flat file already exist in table we delete the matching record from master table & child table and re-insert the data from flat files.
Business has decided to delete (archive) old and inactive data from these 2 tables. This process is run every year. I want to take a backup of this table by creating a similar table in database and start the delete process.
What would be the best approach to take backup of table,because we run the archive process every year. Archive process here refers to physically deleting a record from a table.
Any help is greatly appreciated.

922855 wrote:
Hi Guys,
We have 2 tables, master and child with millions of records in it.These tables gets populated from flat files that we receive from external systems.The major operation on this table are insert/delete(update). The way we do update is, if the record from flat file already exist in table we delete the matching record from master table & child table and re-insert the data from flat files.
Business has decided to delete (archive) old and inactive data from these 2 tables. This process is run every year. I want to take a backup of this table by creating a similar table in database and start the delete process.
What would be the best approach to take backup of table,because we run the archive process every year. Archive process here refers to physically deleting a record from a table.
Any help is greatly appreciated.expdp

E65 and Best CallRecorder from Smartphoneware

Similar Messages

Maybe you are looking for