E65 and BT headset

I bougt E65 smatphone, everything seems great with it, exept one thing. When I connect my Logitech Freedom Hedset and NextLink Bluespoon AX2 on it it drops volume to the minimum, so every time I have to put it to maximum manually on headset...
Another thing when you answer the call using the headset, first second you hear callr's voys on max. level and than it drops to minimum... Pretty annoying, especially when you drive. Enyone have the solution for theese probelms? Also it is not possible to chenge volume of a headset from the phone itself...
Theese headsets were working properly on my old Nokia 6230i, so i suppose they are not broken or anything.

I have the same problem with my E65 and both of my Logitech Freedom headsets (versions 5 and 8). Although the volume problem is annoying, there is a more serious problem where after a while you hear the other party very loud and distorted, while the other party does not hear you at all anymore. Only way to solve this is to reboot (switch off and on) the phone. The headsets work perfectly on my 2 other Nokia phones, one 6021 and one other I don't remember the model number.
My only resolution is to buy a new headset, any recommendations for troublefree use?

Similar Messages

  • E65 and Bluetooth intermittent freeze up on phone

    Hi Guys
    Thanks for taking the time to respond:
    I have an E65 and PC suite at home and office (Toshiba and Bluesoleil). This works well 80% of the time. It's not set to sync auto.
    Often the Bluetooth on the phone freezes in connected mode and the only way to get it going is to switch bluetooth off on the phone and on again. It’s flashed to the latest firmware to no avail.
    I've set the phone to Bluetooth - hidden and this doesn’t make much difference either.
    The nasty is that when it freezes like this it causes the battery to drain rapidly and will prob have me die early because of the continuous radiation!
    Any advice is much appreciated.

    could also be an issue with short bluetooth range of the phone or headsets
    at least it would break up like that if range was an issue

  • 4s and BT headset: much lower max volume than on 4?

    Hi.
    I noticed on my new 4s phone that the volume level on the plantronics BT headset is much lower than I used to have on the 4.
    This is generally not a big issue when beeing in a quiet area, but in a car very difficult to understand. Even on max volume, I hardly can't hear.
    it wasn't that loud before that one has to implement some sound limitation, but at least it was easier.
    Anyone else noticed that?
    Danny

    I have the same problem with my E65 and both of my Logitech Freedom headsets (versions 5 and 8). Although the volume problem is annoying, there is a more serious problem where after a while you hear the other party very loud and distorted, while the other party does not hear you at all anymore. Only way to solve this is to reboot (switch off and on) the phone. The headsets work perfectly on my 2 other Nokia phones, one 6021 and one other I don't remember the model number.
    My only resolution is to buy a new headset, any recommendations for troublefree use?

  • E65 and what router

    hi first time poster long time reader so please be nice
    I have an E65 and i'm trying to get the internet telephone to work
    Location: UK
    Connection is : Virgin 20MB
    current router : Netgear WPN 824v2 wireless router(latest firmware)
    my problem is i can connect to the wireless network and surf the net no problem , but as soon as i try to make a net call it crashes the router , i use Ubuntu and ekiga on both wired and wireless , my thought is the phone is just not compatible with the netgear.
    So oh great and wise Nokia forum Guru's what routers do you use that is know to work with an E65
    min router requirements are :
    Cable
    4 port lan
    wireless
    i'm looking at the Linksys: WRT300N " The incredible speed of Wireless-N makes it ideal for media-centric applications like streaming video, gaming, and Voice over IP telephony"
    over to the forum and thanks for all help advice given

    This is what i got back from Netgear Support
    WPN824v2 is a home class router and does not have any specific support for Session Initiation Protocol or a H.323 gateway. The unit was not designed for use with a SIP phone in mind and may not work with it.
    You can try a firmware update or a downgrade.
    Version 2.0.10 ( North America and Worldwide Versions) Nov 15, 2006
    Version 2.0.6_1.2.17 ( for use in North America only ) Sep 1, 2006
    Version 1.0.20 ( for use only in Europe ) May 25, 2006
    Version 1.0.19 Mar. 10, 2006
    Initial Release 1.0.1 Jan. 3, 2006
    It may also be necessary to DMZ the IP address of the phone and or disable the SPI firewall.
    Assign a static IP address to the phone if able and then place that IP address of the phone in the DMZ option located under Advanced, WAN Setup.
    OR
    Enable port forwarding to the below listed ports.
    Port 5060 TCP and UDP
    Port 5004 UDP
    Port 10000 UDP (sipgate Stun service - usually 3478/9)
    Ports 16348-32768 UDP (RTP, RTCP multimedia streaming)
    STUN normally operates on TCP and UDP port 3478
    Or what ever ports are specified by the provider.
    Note: The DMZ or port forwarding can be used but no both setup to the same IP address at the same time.
    You may also want to review the below listed web site for a work around using SSH.
    http://www.fonosip.com/english/trouble.html
    Please not the WPN824v2 is end of life and no longer manufactured and more then likely there will be no further firmware updates.
    Thank you for choosing NETGEAR.
    has anyone found a router that works with the E65 ???

  • E65 and BH-214

    I should like know the compatibility between my phone E65 and blue tooth BH-214, tks 

    On which device is the call key  not working ?
    If this post answers your question, you can help others by clicking the green accepted solution' button.
    Please ask your questions to the main board and not to my mailbox. Thank you.

  • E65 and GPS Navman

    Hi,
    I have a Nokia E65 and a GPS bluetooth Navman 4410.
    The GPS's code to pair is NAVMAN.
    But when I try to pair them, I only can write numbers (no letters).
    Could you help me?
    Thanks a lot.

    All Nokia phones seem to support only numeric Bluetooth passcodes (pairing codes).
    There are about 950 million Nokia phones in daily use. Nokia sold 437 million phones in 2007 alone.
    NAVMAN is loosing a lot of potential customers by insisting on using "NAVMAN" (all letters) for their Bluetooth GPS receiver, as no Nokia phone owner can use a NAVMAN GPS receiver.
    Of course, Nokia could also change their phones to also accept other characters (not just digits) for Bluetooth passcodes, but it'll still be easier and faster for a much smaller and probably nimbler company, like NAVMAN, to change, than it it is to get a big company to do such a change (and there are more existing Nokia phones out there, than NAVMAN GPS units, I'm sure).
    In the meanwhile, buy and use somebody else's Bluetooth GPS modules (or somebody else's phones, if you absolutely must have a NAVMAN GPS receiver, and nothing else will make you happy).

  • E65 and 4GB MicroSDHC support

    Bought a E65 and tried to run a 4GB MSDHC card. Failed! Any ideas?

    The E65 does not support SDHC cards.
    It supports standard SD cards up to 2GB. 4GB standard SD cards may work but I don't know anyone who has tried it.

  • Should my iPhone 1 (iOS 3.1.3) with Bluetooth 2.0 (Handset HSP?) work with wireless earbuds with BT 4.0 and the Headset (and Handsfree, A2DP, AVRCP) protocol? They pair and connect; status bar looks good. But audio always comes out the speaker. Thx.

    Should my iPhone 1 (iOS 3.1.3) with Bluetooth 2.0 (Handset HSP?) work with wireless earbuds with BT 4.0 and the Headset (and Handsfree, A2DP, AVRCP) protocol? They pair and connect as expected (with a PIN); status bar looks good and shows Bluetooth active, and I even see the iPhone displays the battery levels of the wireless earbuds. But audio always comes out the speaker. (If I plug in wired headphones into the headphone jack then audio comes into the wired headphones, as expected.) I have rebooted the iPhone; I have had it forget about the wireless earbuds, and repaired and reconnected; I have reset all network settings. Thx in advance.
    PS: I understand that more recent versions of iOS have a way to choose where audio output goes (speaker, headphone jack, Bluetooth device). Does this older version of iOS? I could not find an option or setting.

    I've noticed this lately as well, with my iPhone 4. I couldn't confidently pin it directly on any particular iOS update, but my iPhone used to automatically connect up via Bluetooth with my Prius's handsfree feature, and now it doesn't. I work with a CE-based device at my job, with Bluetooth capability, and I used to test out that feature by having it discover my iPhone. This no longer works either.
    What I have found (not really a solution, but it does work and may be a clue for Apple) is that if I simply go to the Settings app then the General -> Bluetooth screen and let it sit there, it will pair right up with my car within a few seconds. Bluetooth is always on, and always says "Now Discoverable" at the bottom of the settings screen.

  • Cannot disable e65 and windows media player sync

    Hi
    I have a Nokia E65 and i am using Nokia PC suite to sync it.
    every time the phone connects i get a message from the windows media player that the phone memory is nearly full...
    Any idea how I can disable the sync between media player and the mobile? i have tried doing it through the media player, but everytime i remove the phone from the devices list in media player, it comes back again.
    thanks

    Windows Media Player is set to automatically sync with any new player it detects. To switch it off, connect the phone (in Media Player mode); when it starts syncing cancel the sync; then go to:
    'Sync' tab -> Down arrow (righ click) for more options menu -> Nokia E65 (or whatever the name of your phone) -> Advanced Options
    Uncheck the 'Start sync when device connects' and you're good to go. This option can also be found under:
    Options -> Devices -> select Nokia E65 (or whatever the name) -> Properties button
    Hope this helps!
    Ericsson T10i -> Nokia 7110 -> Siemens C45, C55, M55, M65 -> Nokia 6131, N73, N82 -> HTC Wildfire, Desire HD -> Nokia Lumia 800 -> HTC Desire X -> Lumia 820 -> Sony Xperia SP -> Lumia 925 + Sennheiser CX 500
    If I've helped, use the Kudos button to thank

  • I bought a new ipad3 packed but after opening its box there are no headsets in it and iphone headsets wont work with iphone so is it normal I mean why there are no heas sets with ipad3 ?

    I bought a new ipad3 packed but after opening its box there are no headsets in it and iphone headsets wont work with iphone so is it normal I mean why there are no heas sets with ipad3 ?

    Headsets don't come with the iPad. All you get is the iPad, USB cable and wall charger.
    Since you're new to iPad ...
    You can download a complete iPad User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
    Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
    Apple - iPad - Guided Tours
    http://www.apple.com/ipad/videos/
    Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
    How to - Articles & User Guides & Tutorials
    http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
    iPad How-Tos  http://ipod.about.com/lr/ipad_how-tos/903396/1/
    You can download this guide to your iPad.
    iPad User Guide for iOS 5
    http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
     Cheers, Tom

  • 6682 and bluetooth headset with no sound - Here's ...

    Hello,
    I had an 'no sound' issue with a 6682 and a Jabra BT250 bluetooth headset. I've had the phone for 2 months and used the BT250 with it every day.
    My problem started when I connected a POP connector and wired headset (not the standard Nokia version). From that point forward, when I connect my bluetooth headset all of the correct icons appear on the phone showing the BT headset is connected and the bluetooth connection is functioning, but the sound does not come out of the headset. It comes out of the handset (like a normal call) instead.
    I searched through the forum and found this procedure listed for the N70 and other headsets.
    - Take out the battery
    - Take out your sim
    - Leave it for at least 2 hours
    - Put another SIM into it
    I'm adding these steps
    - Turn on the phone
    - If prompted, enter the correct time and date
    - Pair the headset with the phone
    - The headset should now work correctly
    - Power down the phone and replace the borrowed SIM card with your own.
    - Pair the headset with the phone.
    - The bluetooth headset should now work correctly.
    This procedure correected my problem. A thorough cleaning of the connector contacts did not help.
    I hope this helps someone else.

    Did you ever figure out how to use the headset? I am having the same problem

  • Delete e-mail accounts on E65 and 6280

    I am about to sell my phones but I can't delete the e-mail accounts. I have read all possible manuals and guidelines but I can't find any instructions how to remove an old e-mail account.
    On my E65 and I can blank out all fields but not delete och reset the entire account. Also the subject line on deleted mails are not possible to remove.
    On my 6280 I have a bug so I can't use down arrow when I have th e-mail program running.... That causes me to not be able to blank out the account information. I have tried the factory reset but that does not reset e-mail account.
    Can any one help me to remove the accounts or in some way reset the entire phone so all personal information is removed?
    I can't sell the phone when it contains settings to a important mail account!

    On the E65 - *#7370# performs a reset which will wipe all data and put the phone back to basic configuration.
    I am not sure if this will work on the other handset - give it a try.
    Hope his helps.
    John32

  • Hp pavilion g6-1326sl not work the audio and microphone headset

    Good morning ,
    I have a problem on my notebook hp pavilion g6-1326sl . It does not work the audio and microphone headset .
    I tried to format the computer and reinstall the operating system win 7 , both 32 and 64 bit ( one installed ) . I tried using the drivers from the HP website , IDT audio driver High - definition ( HD ) 6.10.6341.0 rev . But the loudspeakers of the PC are combined with headphones ( loudspeakers / headset ) .
    The reproduction of the sounds takes place together , and inserting the headphones do not come off the speakers pc .
    In addition skype does not work in any way , selecting any internal and external microphone , using headphones and without .
    You know help me to solve the problem ?
    thanks

    Hi @twin1981 ,
    Thank you for visiting the HP Support Forums and Welcome. It is a great site for information and questions. I have looked into your issue about your HP Pavilion g6-1326sl Notebook and issues with Skype and a Headset. Here is a link to troubleshoot Headsets in Windows 7.
    What is the Manufacturer of the Headset?
    Here is a link to Skype help under the Technical issues.
    I hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Synch E65 and Palm T5

    Hi everybody,
    I cannot build the connection with my new E65 and mya PDA ( Palm T5); this new phone does not appear in the list of phones. How can I get it work ? Thanks

    I found this post on Geekzone regarding this issue.
    http://www.geekzone.co.nz/content.asp?contentid=833
    See if you can follow the instructions in the post and resolve the issue.
    For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
    http://kb.palm.com/wps/portal/kb/na/tungsten/t5/unlocked/home/page_en.html
    There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

  • I have a 3GS. Am trying to sync a plantronics explorer 232 Bluetooth headset and can't figure it out. I have Bluetooth turned on but it searches for devices and the headset never shows up. Anyone know exactly how to do this?  My tech skills are lacking

    I have a 3GS. Am trying to sync a plantronics explorer 232 Bluetooth headset and can't figure it out. I have Bluetooth turned on but it searches for devices and the headset never shows up. Anyone know exactly how to do this?  My tech skills are lacking

    I have the same blueparrott headset headset with the directions. Actually reading them just fixed my iphone pairing issue.
    Here they are in case u still need them along with what I needed to do to get mine to work with iphone 4
    Pair Headset with Phone
    Turn off headset off
    Hold down headset's MFB (large top button) until red & blue lights flash and you hear 2 rising tones, followed by 4 more tones. Must wait for all before you release the MFB button!! (I had my hubby hold the MFB while I waited for the tones since both come from the headset
    Release the MFB and follow your phone's instructions to place it in 'bluetooth' discoverable mode.  With the iphone4, go to "General" and then "Bluetooth" and turn indicator to "ON".
    This is where my issue occurred as the phone could not find the bluetooth, although it worked with my LG phone.  So after trying it several times thinking I was nuts and that the issue was with the iphone, I looked further in the blueparrot's directions and found this step that fixed the issue.
    Reset Paired Devices List
    On the bluetooth, press and hold down both the volume up & volume down buttons for 5-6 seconds.  A double beep will be heard and the list will be reset.  Pairing info for devices previously paired will be lost.
    The bluetooth directions provide this as step 4 but that did not work for my phone (see below)
    4. Once the phone discovers the headset, select "pair" and enter "0000" code and that when pairing is complete the blue light on the headset will stop flashing and phone will prompt you to 'connect'.
    This is what I had to do after resetting the device list on my bluetooth
    4. My iphone instanting discovered the headset and displayed it under 'Devices" but showed a message that it was 'not connected'.  Once I selected the device on the iphone by pressing on it then it changed to "connected". 
    Even when I turn the bluetooth on and off the device remains on the list and alll I do is select it to connect and disconnect after I turn on my blueparrott bluetooth
    I hope this helps others!   

Maybe you are looking for

  • I'm missing the iTunes radio icon on my iPod Touch

    I had the iOS 7 beta and I was told that it was supposed to have a new radio icon in music. When iOS 7 was officially released, I didn't have the radio icon anywhere in my music. I even checked in more and it wasn't there. To add to this, I just rest

  • A/c entries

    hi, pl let me know a/c posting entries in case of 1 goods receipt -101 2 goods issue 641 & 643 in case on intra company & inter compant sto

  • Fcpx magnetic time line is not working

    Good day, I'm trying to make a music video and when I place photos from iphotos onto the time line... the magnetic function does not work.  Also, I'm trying to fade up from black at the beginning of the video.  I set my transition time to 45 frames..

  • Monitor - Printout Mismatch

    Hello: My problem is a mismatch between the monitor display and the final print.  As detailed below, I've calibrated the monitor and the printer.  Further, I've run a number of tests, to isolate the problem. 1. My current computer system includes Win

  • Difference between Synchronous & ASynchronous.

    Hi All, I few queries: 1) Difference between Synchronous & ASynchronous communication? 2) How should we decide whether it is a Sync or Async scenario? Regards, Sreedhar.