E65 and JRE

Im using my E65 wireless capability to connect to a piece of equiptment which is WIFI enabled and has an HTTP web server. The pages served from the equipment contain java buttons which the E65 cannot display for some reason. The other content on the pages, gfx etc... display OK.
Any ideas, is there a java update?Message Edited by trebz on 03-Oct-200710:38 AM

I could be wrong, but I don't think that the nokia browser supports applets.
Try visiting http://www.java.com/en/download/installed.jsp?dete​ct=jre&try=1
... it's a simple test to check if your browser runs applets.
It's a little confusing I know, because symbian runs java, but even that is a cut down version of java (called J2ME) with very limited capabilities in comparison to the JRE required to run applets in a browser.
hth
A nokia beta tester, just like all other nokia customers.

Similar Messages

  • SAP R/3 4.7 and JRE 1.5

    Hi ,
    On our SAP r/3 4.7 server currently JRE1.4 is installed .
    We recived a request to upgrade it to 1.5
    Can you let us know if there is any dependecy between sap r/3 4.7 and JRE 1.5
    Will it run without any issue.
    Regards
    Madhav

    Hi Sunny ,
    Thanks for the info .Just one more question does  SAP Java connector 3.06 is supported by R/34.7?
    I am unable to find any information  regarding the same anywhere .
    Only thing i found was that
    SAP java connector Supports R/3 3.1I and higher (and other SAP Components that have BAPIs or RFMs).
    It does not say anything about the version of SAP java connector.
    Regards
    Madhav

  • Errors installing and uninstalling JDK and JRE 5.0 update 6

    I recently removed some older versions of java as they take up alot of space.. now wondering if i should have.
    I uninstalled all version fine, leaving only the update 6 for both JDK and JRE. Now when i try to compile in Jcreator i get the error message:
    'Error : Invalid path, "C:\ProgramFiles\Java\jdk1.5.0_05\bin\javac.exe" -source 1.5 -classpath "C:\Program Files\Xinox
    Software\JCreatorV3LE\MyProjects\Chapter07_Listing03" -d C:\Program"
    Files\Xinox "Software\JCreatorV3LE\MyProjects\Chapter07_Listing03
    @src_chapter07_listing03.txt"'
    I have no javac file in the directory.I did before i unstalled the older updates
    I am getting a windows installer error when trying to install JDK 5.0 update 6, windows installer works when trying to uninstall though. When i try to remove JDK 5.0 update 5, it tells me i all ready have this version installed, and to uninstall through my add/remove utility which is what i am doing! Then if i click ok i get: 'Fatal error during installation' This also occurs when trying to remove update 6. I also get problems with my JRE 5.0 update 6. When trying to uninstall i get the message 'error applying transforms, verify paths are valid' I cannot get rid of these!. It seems to be interfering/linked with installing them aswell.
    PLEASE HELP ME-i just want to compile
    Thank you

    This forum is for Sun Java Studio Creator product only... We'll be happy to assist you anytime if you have trouble installing or using this product. :-)

  • HTML Converter vs. JRE 1.4.x and JRE 1.3.x

    Had Netscape 6.1 and IE 5.0 and JRE 1.3.1 -- wrote applet
    and used HTML Converter to convert the HTML page to use JRE 1.3.1
    plugin.
    Everything worked just fine...
    Installed Netscape 7.02 and IE 6.0 and JRE 1.4.1.
    Now the HTML pages that were converted don't work with NN7 anymore
    because the page wants to load the 1.3.1 plugin. I get a message to
    load the 1.3.1 plugin. When I got the latest JRE, it was 1.3.1_07.
    I installed it and it still won't run because it doesn't install into
    NN7.
    And now NN6 won't run the old page anymore because the 1.3.1_07 is the
    new default plugin.
    Now NN7 and 1.4.x doesn't need converted HTML pages anymore but
    I still have a bunch of old converted HTML pages. Do I have to
    replace all my old converted HTML pages with plain vanilla pages now?
    If so, WHY DID SUN LEAD ME DOWN THE GARDEN PATH WITH THE HTML CONVERTER?
    ARRGGGGHHHHHH!
    Is there any way to get compatibility with the old converted HTML pages?
    Ken

    I don't pretend to be able to resolve the problem here - you have too many variables in the problem. The best advice I can give is to research the Plugin Developer's Guide, as it discusses this stuff in intimate detail.
    http://java.sun.com/j2se/1.4.1/docs/guide/plugin/developer_guide/contents.html
    These might also be useful
    http://java.sun.com/products/plugin/
    http://java.sun.com/products/plugin/versions.html

  • E65 and BT headset

    I bougt E65 smatphone, everything seems great with it, exept one thing. When I connect my Logitech Freedom Hedset and NextLink Bluespoon AX2 on it it drops volume to the minimum, so every time I have to put it to maximum manually on headset...
    Another thing when you answer the call using the headset, first second you hear callr's voys on max. level and than it drops to minimum... Pretty annoying, especially when you drive. Enyone have the solution for theese probelms? Also it is not possible to chenge volume of a headset from the phone itself...
    Theese headsets were working properly on my old Nokia 6230i, so i suppose they are not broken or anything.

    I have the same problem with my E65 and both of my Logitech Freedom headsets (versions 5 and 8). Although the volume problem is annoying, there is a more serious problem where after a while you hear the other party very loud and distorted, while the other party does not hear you at all anymore. Only way to solve this is to reboot (switch off and on) the phone. The headsets work perfectly on my 2 other Nokia phones, one 6021 and one other I don't remember the model number.
    My only resolution is to buy a new headset, any recommendations for troublefree use?

  • E65 and what router

    hi first time poster long time reader so please be nice
    I have an E65 and i'm trying to get the internet telephone to work
    Location: UK
    Connection is : Virgin 20MB
    current router : Netgear WPN 824v2 wireless router(latest firmware)
    my problem is i can connect to the wireless network and surf the net no problem , but as soon as i try to make a net call it crashes the router , i use Ubuntu and ekiga on both wired and wireless , my thought is the phone is just not compatible with the netgear.
    So oh great and wise Nokia forum Guru's what routers do you use that is know to work with an E65
    min router requirements are :
    Cable
    4 port lan
    wireless
    i'm looking at the Linksys: WRT300N " The incredible speed of Wireless-N makes it ideal for media-centric applications like streaming video, gaming, and Voice over IP telephony"
    over to the forum and thanks for all help advice given

    This is what i got back from Netgear Support
    WPN824v2 is a home class router and does not have any specific support for Session Initiation Protocol or a H.323 gateway. The unit was not designed for use with a SIP phone in mind and may not work with it.
    You can try a firmware update or a downgrade.
    Version 2.0.10 ( North America and Worldwide Versions) Nov 15, 2006
    Version 2.0.6_1.2.17 ( for use in North America only ) Sep 1, 2006
    Version 1.0.20 ( for use only in Europe ) May 25, 2006
    Version 1.0.19 Mar. 10, 2006
    Initial Release 1.0.1 Jan. 3, 2006
    It may also be necessary to DMZ the IP address of the phone and or disable the SPI firewall.
    Assign a static IP address to the phone if able and then place that IP address of the phone in the DMZ option located under Advanced, WAN Setup.
    OR
    Enable port forwarding to the below listed ports.
    Port 5060 TCP and UDP
    Port 5004 UDP
    Port 10000 UDP (sipgate Stun service - usually 3478/9)
    Ports 16348-32768 UDP (RTP, RTCP multimedia streaming)
    STUN normally operates on TCP and UDP port 3478
    Or what ever ports are specified by the provider.
    Note: The DMZ or port forwarding can be used but no both setup to the same IP address at the same time.
    You may also want to review the below listed web site for a work around using SSH.
    http://www.fonosip.com/english/trouble.html
    Please not the WPN824v2 is end of life and no longer manufactured and more then likely there will be no further firmware updates.
    Thank you for choosing NETGEAR.
    has anyone found a router that works with the E65 ???

  • E65 and Bluetooth intermittent freeze up on phone

    Hi Guys
    Thanks for taking the time to respond:
    I have an E65 and PC suite at home and office (Toshiba and Bluesoleil). This works well 80% of the time. It's not set to sync auto.
    Often the Bluetooth on the phone freezes in connected mode and the only way to get it going is to switch bluetooth off on the phone and on again. It’s flashed to the latest firmware to no avail.
    I've set the phone to Bluetooth - hidden and this doesn’t make much difference either.
    The nasty is that when it freezes like this it causes the battery to drain rapidly and will prob have me die early because of the continuous radiation!
    Any advice is much appreciated.

    could also be an issue with short bluetooth range of the phone or headsets
    at least it would break up like that if range was an issue

  • E65 and BH-214

    I should like know the compatibility between my phone E65 and blue tooth BH-214, tks 

    On which device is the call key  not working ?
    If this post answers your question, you can help others by clicking the green accepted solution' button.
    Please ask your questions to the main board and not to my mailbox. Thank you.

  • E65 and GPS Navman

    Hi,
    I have a Nokia E65 and a GPS bluetooth Navman 4410.
    The GPS's code to pair is NAVMAN.
    But when I try to pair them, I only can write numbers (no letters).
    Could you help me?
    Thanks a lot.

    All Nokia phones seem to support only numeric Bluetooth passcodes (pairing codes).
    There are about 950 million Nokia phones in daily use. Nokia sold 437 million phones in 2007 alone.
    NAVMAN is loosing a lot of potential customers by insisting on using "NAVMAN" (all letters) for their Bluetooth GPS receiver, as no Nokia phone owner can use a NAVMAN GPS receiver.
    Of course, Nokia could also change their phones to also accept other characters (not just digits) for Bluetooth passcodes, but it'll still be easier and faster for a much smaller and probably nimbler company, like NAVMAN, to change, than it it is to get a big company to do such a change (and there are more existing Nokia phones out there, than NAVMAN GPS units, I'm sure).
    In the meanwhile, buy and use somebody else's Bluetooth GPS modules (or somebody else's phones, if you absolutely must have a NAVMAN GPS receiver, and nothing else will make you happy).

  • E65 and 4GB MicroSDHC support

    Bought a E65 and tried to run a 4GB MSDHC card. Failed! Any ideas?

    The E65 does not support SDHC cards.
    It supports standard SD cards up to 2GB. 4GB standard SD cards may work but I don't know anyone who has tried it.

  • Term confusion: JVM and JRE

    Could anyone clarify the terms JVM (Java Virtual Machine) and JRE (Java Runtime Environment)?
    As far as I know, they mean the same thing and can be used interchangeably. Am I right?
    (I am writing a paper which requires dead accurate use of technical terms.)

    http://www.google.com/search?q=define%3Ajvm&sourceid=mo
    illa-search&start=0&start=0&ie=utf-8&oe=utf-8
    Here's one half of your search.Here's for people who would also like to know:
    JVM
    (JavaTM Virtual Machine) (n.) The part of the Java runtime environment (JRE) responsible for interpreting bytecodes.
    JRE
    (JavaTM runtime environment) (n.) A subset of the Java Development Kit (JDK) for users and developers who want to redistribute the runtime environment. The Java runtime environment consists of the Java virtual machine (JVM), the Java core classes, and supporting files.

  • Cannot disable e65 and windows media player sync

    Hi
    I have a Nokia E65 and i am using Nokia PC suite to sync it.
    every time the phone connects i get a message from the windows media player that the phone memory is nearly full...
    Any idea how I can disable the sync between media player and the mobile? i have tried doing it through the media player, but everytime i remove the phone from the devices list in media player, it comes back again.
    thanks

    Windows Media Player is set to automatically sync with any new player it detects. To switch it off, connect the phone (in Media Player mode); when it starts syncing cancel the sync; then go to:
    'Sync' tab -> Down arrow (righ click) for more options menu -> Nokia E65 (or whatever the name of your phone) -> Advanced Options
    Uncheck the 'Start sync when device connects' and you're good to go. This option can also be found under:
    Options -> Devices -> select Nokia E65 (or whatever the name) -> Properties button
    Hope this helps!
    Ericsson T10i -> Nokia 7110 -> Siemens C45, C55, M55, M65 -> Nokia 6131, N73, N82 -> HTC Wildfire, Desire HD -> Nokia Lumia 800 -> HTC Desire X -> Lumia 820 -> Sony Xperia SP -> Lumia 925 + Sennheiser CX 500
    If I've helped, use the Kudos button to thank

  • Upgrading JDK and JRE in 10.2.0.4 Oracle_Home of 11.5.10.2 EBS ?

    I've tried to find something at Metalink but failed.
    What's the lastest Java Version certified to use with the database ORACLE_HOME (10.2.0.4) in 11.5.10.2 EBS? And what's the procedure to update it?
    There is no hint in note 300482.1 "Overview of Using Java with Oracle E-Business Suite Release 11i" and the Java version related documents.
    I found note 418399.1 "How To Update The Default JDK and JRE Installed In Oracle Database Home 10.1 and 10.2" which states "...When installing a new version it is important that the major version (1.4) remains the same, and you only change the "update" number...." But that note is not EBS related.
    So is there no way to update Java in ORACLE_HOMEs beyond 1.4?
    Thanks
    Martin

    Hi Hussein,
    thx for your help!
    There is no special cause. I'm trying to keep our installations current.
    I thought that I had to update the Database JDK in earlier cases before migrating to autoconfig or before applying MPs. And as Steven Chan wrote something about [the implications of end-of-life of J2SE 1.5 for EBusiness Suite in his blog|http://blogs.oracle.com/stevenChan/2009/06/understanding_j2se_15_endoflife_implications_for_apps.html] I thought that I better should check if I got to update the DB Oracle_Homes, too.
    Martin

  • Delete e-mail accounts on E65 and 6280

    I am about to sell my phones but I can't delete the e-mail accounts. I have read all possible manuals and guidelines but I can't find any instructions how to remove an old e-mail account.
    On my E65 and I can blank out all fields but not delete och reset the entire account. Also the subject line on deleted mails are not possible to remove.
    On my 6280 I have a bug so I can't use down arrow when I have th e-mail program running.... That causes me to not be able to blank out the account information. I have tried the factory reset but that does not reset e-mail account.
    Can any one help me to remove the accounts or in some way reset the entire phone so all personal information is removed?
    I can't sell the phone when it contains settings to a important mail account!

    On the E65 - *#7370# performs a reset which will wipe all data and put the phone back to basic configuration.
    I am not sure if this will work on the other handset - give it a try.
    Hope his helps.
    John32

  • ABAP and JRE

    Hi,
    Pls explain how ABAP and JRE works  in XI environment ?
    Thx,
    Sofia

    1.
    SAP was developed by ABAP, in which SAP AG developed ABAP and it was and is still is use ABAP to build componentes of SAP. Years to come ABAP will still move on and become more important tool to maintain SAP.
    2.
    ABAP itself is a 4th generation language in which, if you are asking for its compilers, has an interpreter and a processor. There are called ABAP Interpreters and ABAP processors. To understand how both of these mechanism works, you need to understand how does the screen gets it data flow from forms to underlying coding. So ABAP interpreters functions as a means to interprets dialogs and ABAP processor to process syntaxes and others related ABAP objects. That is why we can enable the '/h' to debug screens and abap code. The underlying coding of SAP is a gargantuan piece of artwork.
    So you have it, ABAP has (known as) ABAP interpreters and ABAP processors by ABAP.
    Note : To Anyone to rebutt... Some parts of SAP kernel are written by C++
    3.
    Database is indenpendent in SAP. You can have Oracle, DB2 or SQL Enterprise Server to support SAP's massive or gargantuan data.... but.... SAP still have their own DBMS ... known as SAP DB.
    I hope this helps you...
    Thanks
    William Wilstroth

Maybe you are looking for

  • Yet ANOTHER New Problem - Can No Longer Upload an Image with 64 Bit IE9

    I've been uploading images as part of forum posts successfully for weeks using IE9 64 bit, set for Compatibility View. Suddenly, starting yesterday, using the little camera icon with IE9 64 bit, when I hit the [Browse] button, the entire IE window ju

  • Turn metronome off ... once and for all  ...

    I've seen the same question both here and other places on the web ... But I've yet to see a definitve answer/solution ... :-/ So : Is there a way to disable/turn off the metronome ONCE AND FOR ALL ! ? Now I have to turn it off every time I start a ne

  • How do i drag plugins into the right folder? so they show up in effects?

    ok i did it once but my friend told me. i think it was something like go into the mac hd then go into the library folder....and something?? i am trying to make it so that the plugin effects are inside final cut pro when i open the app. thanks. if

  • Excel 2007 Converted to PDF cuts off information

    I am using Acrobat 8.1 and I am having trouble converting the information from Excel 2007. Some of the text in the cells are cut off on the ends. Is there some kind of tweak to stop this? Thanks

  • Track Text Edit tags get trounced when applying additional tag?

    Hi all, Just upgraded to FM9. I opened a doc that was originall created in FM8. I had (and still have) enabled tracking of text edits, and can see the FM8_TRACK_CHANGES_ADDED and FM8_TRACK_CHANGES_DELETED tags when I highlight text. However, when I a