E65 and N95 microSD support

Hello,
simple question. I have E65 FW ver. 2.0633.65.01 03-10-07. I have 2 Giga Sandisk SD card. I have some maps on the SD card but when I want to download whole Europe its bigger than card. What is the maximum SD support for E65 please? Is it possible to use with this new FW bigger SD card? I asked in Nokia Care point and there told me that max is 2 GB, so Im asking you about the true of support.
And one more question I want to buy my girlfriend N95 (not N95 8GB) and what is there the maximum SD card support?
Thanks for answers

Hi petrr
For your E65 largest size is a maximum of 2GB microSD unfortunately.
For N95 the largest size currently available is 8GB micro SDHC although technology supports larger sizes.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

  • E65 and 4GB MicroSDHC support

    Bought a E65 and tried to run a 4GB MSDHC card. Failed! Any ideas?

    The E65 does not support SDHC cards.
    It supports standard SD cards up to 2GB. 4GB standard SD cards may work but I don't know anyone who has tried it.

  • E65 and what router

    hi first time poster long time reader so please be nice
    I have an E65 and i'm trying to get the internet telephone to work
    Location: UK
    Connection is : Virgin 20MB
    current router : Netgear WPN 824v2 wireless router(latest firmware)
    my problem is i can connect to the wireless network and surf the net no problem , but as soon as i try to make a net call it crashes the router , i use Ubuntu and ekiga on both wired and wireless , my thought is the phone is just not compatible with the netgear.
    So oh great and wise Nokia forum Guru's what routers do you use that is know to work with an E65
    min router requirements are :
    Cable
    4 port lan
    wireless
    i'm looking at the Linksys: WRT300N " The incredible speed of Wireless-N makes it ideal for media-centric applications like streaming video, gaming, and Voice over IP telephony"
    over to the forum and thanks for all help advice given

    This is what i got back from Netgear Support
    WPN824v2 is a home class router and does not have any specific support for Session Initiation Protocol or a H.323 gateway. The unit was not designed for use with a SIP phone in mind and may not work with it.
    You can try a firmware update or a downgrade.
    Version 2.0.10 ( North America and Worldwide Versions) Nov 15, 2006
    Version 2.0.6_1.2.17 ( for use in North America only ) Sep 1, 2006
    Version 1.0.20 ( for use only in Europe ) May 25, 2006
    Version 1.0.19 Mar. 10, 2006
    Initial Release 1.0.1 Jan. 3, 2006
    It may also be necessary to DMZ the IP address of the phone and or disable the SPI firewall.
    Assign a static IP address to the phone if able and then place that IP address of the phone in the DMZ option located under Advanced, WAN Setup.
    OR
    Enable port forwarding to the below listed ports.
    Port 5060 TCP and UDP
    Port 5004 UDP
    Port 10000 UDP (sipgate Stun service - usually 3478/9)
    Ports 16348-32768 UDP (RTP, RTCP multimedia streaming)
    STUN normally operates on TCP and UDP port 3478
    Or what ever ports are specified by the provider.
    Note: The DMZ or port forwarding can be used but no both setup to the same IP address at the same time.
    You may also want to review the below listed web site for a work around using SSH.
    http://www.fonosip.com/english/trouble.html
    Please not the WPN824v2 is end of life and no longer manufactured and more then likely there will be no further firmware updates.
    Thank you for choosing NETGEAR.
    has anyone found a router that works with the E65 ???

  • E65 and GPS Navman

    Hi,
    I have a Nokia E65 and a GPS bluetooth Navman 4410.
    The GPS's code to pair is NAVMAN.
    But when I try to pair them, I only can write numbers (no letters).
    Could you help me?
    Thanks a lot.

    All Nokia phones seem to support only numeric Bluetooth passcodes (pairing codes).
    There are about 950 million Nokia phones in daily use. Nokia sold 437 million phones in 2007 alone.
    NAVMAN is loosing a lot of potential customers by insisting on using "NAVMAN" (all letters) for their Bluetooth GPS receiver, as no Nokia phone owner can use a NAVMAN GPS receiver.
    Of course, Nokia could also change their phones to also accept other characters (not just digits) for Bluetooth passcodes, but it'll still be easier and faster for a much smaller and probably nimbler company, like NAVMAN, to change, than it it is to get a big company to do such a change (and there are more existing Nokia phones out there, than NAVMAN GPS units, I'm sure).
    In the meanwhile, buy and use somebody else's Bluetooth GPS modules (or somebody else's phones, if you absolutely must have a NAVMAN GPS receiver, and nothing else will make you happy).

  • Synch E65 and Palm T5

    Hi everybody,
    I cannot build the connection with my new E65 and mya PDA ( Palm T5); this new phone does not appear in the list of phones. How can I get it work ? Thanks

    I found this post on Geekzone regarding this issue.
    http://www.geekzone.co.nz/content.asp?contentid=833
    See if you can follow the instructions in the post and resolve the issue.
    For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
    http://kb.palm.com/wps/portal/kb/na/tungsten/t5/unlocked/home/page_en.html
    There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

  • Samsun R480 and using MicroSD Adapter 4GB memory

    I have a Samsung R480 laptop & and digital camera with 4GB microSD Adapter. 
    Question:   after plugging IN the SD device to this laptop .... NOTHING HAPPENs.... WHY, WHERE IS THE sd DEVICE DRIVER !!!!????

    macrobb wrote:
    Likely because your laptop only supports SD cards, and your MicroSD card is a SDHC card. I ran into that on my laptop.
    The solution? a $5 or so USB adaptor off Ebay. Simple, cheap, effective. Just make sure it supports SDHC cards.
    R480 is a current model - more than new enough to support SDHC/MicroSDHC.  Even my 2006-era Inspiron E1705 supported SDHC with a driver upgrade.
    *disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

  • Did Nokia N95 Classic(N95-1) support "Nokia Come W...

    Did Nokia N95 Classic(N95-1) support "Nokia Come With Music" Service?
    The Nokia Come With Music Service now only Nokia 5310XM, Nokia N95 8GB and Nokia 5800XM support. Then did Nokia N95 Classic(N95-1) will support this service soon?

    Probably not.
    You have to buy a phone with a comes with music licence so only selected newer models are available with it.
    You can't get the licence if you already have the phone. Also it's only available in certain countries.

  • Can nokia make N95 8gb support WMV in next firmwar...

    can nokia make N95 8gb support WMV in next firmware or not??

    17-Dec-2008 11:45 AM
    drdivan55 wrote:
    17-Dec-2008 10:22 AM
    psychomania wrote:
    Don't hold your breath for that. The core player people have been promising WMV support for a couple of years now.
    I won't. I am definitely determined to buy the upcoming N97 which has wmv support (or at least I red somewhere it would support it). But even if it doesn't I will still buy it. (I will not buy it only if it is crippled in some way as the N96 has no VoIP support for example.)
    Where did you get it that the n96 has no voip? I own a N95 8gb, and recently my brother purchased the N96. The first thing we installed on the N96 was Fring, and it worked perfectly. The phone also opens and plays WMV files trough the Real Player it has in it.
    However, I remember that some time ago Vodafone UK and others used to cripple the voip function on purpose...

  • MicroSD support in E-7??

    MicroSD support is not mentioned in E-7 specifications. Is E-7 really lacking microSD?

    From what you can see it looks like it's lacking support for micro SD. And most likely it will not have it too.
    It will have a 16 gb mass memory and 1 gb nand memory which should be plenty of space for most users. It will also have the USB OTG feature where you can connect most USB memory sticks to a cable and to the phone.
    So for me, the phone will be absolutely perfect when it comes to storage. Plenty of enough space and OTG feature.

  • Had a recent crash on my macbook, was previously using OS 10.6 I think. Restored from recent Time Machine backup and updated to OS 10.8.2 and now I cannot open Logic Pro 9. I get a 'No entry' Icon and a not supported on this type of Mac message. I cannot

    Had a recent crash on my macbook, was previously using OS 10.6 I think. Restored from recent Time Machine backup and updated to OS 10.8.2 and now I cannot open Logic Pro 9. I get a 'No entry' Icon and a not supported on this type of Mac message. I cannot update either as anything up to 9.1.1 tells me I don't need it yet 9.1.2 tells me I need an eligable Logic Pro Version was not found in applications.
    All of my files are stored in a separate hard drive with only the actual app having been on my Macbook. Should I just reinstall?

    Hi
    To run Mouitain Lion you need to update Logic.
    For the updaters to work the Logic application must be:
    a) Within the Applications folder, and not in any sub-folder
    b) Named "Logic Pro" with no extra numbers or spaces
    CCT

  • HT5312 I didn't make a rescue e-mail and now i forgot the answers of my security questions!!' And the apple support contact wont open???

    I didn't make a rescue e-mail and now i forgot the answers of my security questions!!' And the apple support contact wont open???

    I'm not sure what you mean by the 'apple support contact wont open' (?). If you mean the 'contact iTunes Store support' link on the page that you posted from I've just tried it and it seems to wok ok for me, though I haven't gone as far as to actually contact them.
    You can contact either iTunes Support or Apple to get the questions reset.
    e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then 'Forgotten Apple ID security questions'
    or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
    When they've been reset you can then use the steps on the page that you posted from to add a rescue email address for potential future use, or if it's available in your country you could change to 2-step verification : http://support.apple.com/kb/HT5570

  • My WIFI keeps on disconnecting and even after reporting and suggestion by support the phone hasnt been replaced or repaired under warranty

    I think I have had enough. So its been a long time back and forth between me and you. Since I am not getting any solution and same thing you guys are providing me again and again.
    I want to take a step back and list down a few things which have happened so far :-  
    I started chatting with the apple support on this issue starting September - please refer back to your chats on this Serial Number.
    I have factory reset my phone like 20 times since then as each time they asked me to follow few steps which made me loose my data as your icloud doesn't work properly as stated by your customer care support people itself that sometimes the back up doesn't happen so please take back up at your laptop too.
    Send phone diagnostics by clicking on a link.
    reset your WIFI settings
    Call apple support after 24 hours of observation.
    Next day when same issue occurs then extreme Apology.
    Take Back up on computer and Icloud both and contact apple support once its done
    Call apple support again.
    Factory Reset by erase all contents and setting options. Once one call back again.
    wait and analyse for a whole day after setting up apple ID and data.
    Wifi Issue stil exists.
    Call apple support again
    Between all this I had to explain the issue each time to a new representative. This above process I have gone through at least 7-8 times. Please go and refer your call notes.
    So finally i got to know after escalating it several times and one of your supervisors told me that the issue is a hardware issue and it can only be replaced as they have tried it all.
    Supervisor assured me that he has recommended it to be replaced in notes and asked me to visit a center.
    I called in local distributor and set up an appointment, unfortunately couldnt make it. So call them to reschedule as I am working women so i dont have all the time in life to keep interacting with associate after associate so thought of walking in to an apple store near by and lodge a complaint. The supervisor updated me that I have warranty left and it will be replaced without any cost and also if i report and issue in warranty and if apple is not able to resolve it so the warranty stands true until its completely resolved after customer's consent.
    I went in to give my phone to the tech support and they kept it for analysis and came back saying the issue doesnt exist. I was getting a disconnection in my WIFI every now and then. My Data plan was always used and i fortunately have a proof of that.
    Customer rep told me talk to apple support and if they say we will replace it. One more place added where customer has to go.
    Now and back to square one - They say phone is damaged - we cant replace it. First of all the phone is not damaged and you guys are just finding reasons to not replace a faulty phone.
    It randomly disconnects and its listed as a known issue on your website too. had this not been listed i would have never thought its the phone. Then I started to observe that its the phone that makes a disconnection and not the WIFI connections as it was everywhere home, office and at friends place.
    Best i can do is call you guys when this happens if you guys promise me that the tech employee of apple can come to whatever location i suggest at that point and do not be surprised if the phone behaves normal when the person arrives as its random.
    Now you want pictures of my phone and you want to analyse further.

    After making an appointment and waiting over a week I was a few minutes late for my appointment I was told by apple I would have to make a new appointment. The shop was Chatswood in Sydney and the manager Mathew was very pathetic. I travelled 1 hour each way and was treated very poorly I must comment and say this was my first Apple devices and I will never understand how come people are buying these devices. The apps seem really good if only the hardware and the support could match. I really wish this manager all his best to Matthew in his next position somewhere else he obviously should not be in the position of managing an Apple store.

  • Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved.  It started with the last upgrade to 10.8

    Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved.  It started with the last upgrade to 10.8

    Back up all data.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
    Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2 (optional)
    The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
    Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    resetpassword
    That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not  going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • MP3 and restricted codec support

    hi,
    finally I have my system set and running. I did go for the KDE4 which I like very much and followed all the steps as stated in the Beginner'S Guide.
    However, I don't have MP3 neither other multimedia propietary format access like MP4, AAC, MOV, WMA, WMV or RMVB - I carry my multimedia collection of songs, videos and movies from when I was on WinXP (yikes!)- despite I installed Xine and other utilities as desccribed in the Beginner's Guide.
    I do can watch some AVI files but can't access sound stream so they're muted. How do I add full multimedia support to my fresh shiny Arch? I did try to search the forums but there's to seem a problem because I keep receiving desconnections errors.

    http://bbs.archlinux.org/viewtopic.php?id=93862
    Re: MP3 and restricted codec support
    why did you opened a new thread instead of discussion in the previous one?
    oops, I did it again, sorry! (yeah, I know you prefer Brtiney saying that )
    I just did the same of my very first post: promise to don't screw things again and follow the rules.
    @Bralkein: thanks for your tips and useful research, I will stick with xine until I backup my root, then maybe I try gstreamer.
    @.:B:.: I have panic of installing things that can break my system, before installing Arch few days ago I came from an entire life in *buntuland, so you'll see : D
    Last edited by martin77 (2010-03-27 05:10:09)

  • I would like to put Dreamweaver 8 on a new computer.  There is no "deactivate" function and the technical support person I chatted with recommended I come here.  Can I just use the serial number again?  How can I deactive?  Has anyone else run into this?

      There is no "deactivate" function and the technical support person I chatted with recommended I come here.  Can I just use the serial number again?  How can I deactive?  Has anyone else run into this?  How can I get Dreamweaver 8, which is no longer being activated by Adobe, on a new computer?  Is it even worth doing or do I need to get a new version.  What are the killer features I'm missing?

    If you manage to get it installed on your current OS, don't forget to install the 8.02 update.
    Adobe - Dreamweaver Support Center : Updaters
    Nancy O.

Maybe you are looking for