E65 and what router

hi first time poster long time reader so please be nice
I have an E65 and i'm trying to get the internet telephone to work
Location: UK
Connection is : Virgin 20MB
current router : Netgear WPN 824v2 wireless router(latest firmware)
my problem is i can connect to the wireless network and surf the net no problem , but as soon as i try to make a net call it crashes the router , i use Ubuntu and ekiga on both wired and wireless , my thought is the phone is just not compatible with the netgear.
So oh great and wise Nokia forum Guru's what routers do you use that is know to work with an E65
min router requirements are :
Cable
4 port lan
wireless
i'm looking at the Linksys: WRT300N " The incredible speed of Wireless-N makes it ideal for media-centric applications like streaming video, gaming, and Voice over IP telephony"
over to the forum and thanks for all help advice given

This is what i got back from Netgear Support
WPN824v2 is a home class router and does not have any specific support for Session Initiation Protocol or a H.323 gateway. The unit was not designed for use with a SIP phone in mind and may not work with it.
You can try a firmware update or a downgrade.
Version 2.0.10 ( North America and Worldwide Versions) Nov 15, 2006
Version 2.0.6_1.2.17 ( for use in North America only ) Sep 1, 2006
Version 1.0.20 ( for use only in Europe ) May 25, 2006
Version 1.0.19 Mar. 10, 2006
Initial Release 1.0.1 Jan. 3, 2006
It may also be necessary to DMZ the IP address of the phone and or disable the SPI firewall.
Assign a static IP address to the phone if able and then place that IP address of the phone in the DMZ option located under Advanced, WAN Setup.
OR
Enable port forwarding to the below listed ports.
Port 5060 TCP and UDP
Port 5004 UDP
Port 10000 UDP (sipgate Stun service - usually 3478/9)
Ports 16348-32768 UDP (RTP, RTCP multimedia streaming)
STUN normally operates on TCP and UDP port 3478
Or what ever ports are specified by the provider.
Note: The DMZ or port forwarding can be used but no both setup to the same IP address at the same time.
You may also want to review the below listed web site for a work around using SSH.
http://www.fonosip.com/english/trouble.html
Please not the WPN824v2 is end of life and no longer manufactured and more then likely there will be no further firmware updates.
Thank you for choosing NETGEAR.
has anyone found a router that works with the E65 ???

Similar Messages

  • Adding VLAN to Po-Group and OSPF routing what is the correct way?

    Hi Community,
    I recently had an issue that brought down the links between a couple of switches...luckily this was done after hours and I did not save the config so was able to revert back.
    The basic scope of my project is:
    We are running out of IP's on the 192.168.1.0/24 sunbnet so wanted to create a seperate VLAN/Subnet  for physical workstations.
    He is what I orginally did;
    1) On our core switch; (Switch1) 
         Create the VLAN,
         VLAN interface,
         DHCP pool,
         excluded address'
    2) On second  switch (Switch 2)
         Add VLAN name, no interface
    3) I then updated the PO-group on Switch1 with new VLAN  (this brought down the link before I was able to finish my config)
        Therefore I was not able to complete the following:
              add vlan to spanning-tree or updated OSPF routing
    Here is what I assume to be the correct order?
    1) On Core Switch (Switch 1)
         Create VLAN
         VLAN interface
         DHCP pool
         excluded address'
         add vlan to spanning-tree
         add vlan (passive interface) and sunbet to OSPF routing
    2) On Switch 2
         Add vlan name/interfaces with no ip
    3) Update PO groups after the above has been configured
         Add new VLAN to Po-Group on Switch 2
         Add new VLAN to Po-Group on Switch 1
    4) Last steps
         Updated specific access ports with new VLAN and test
         upon completion of testing, update all other access ports connected ot workstations with new VLAN
    Questions:
    Did my links go down because I added new VLAN to Po-group BEFORE  updating spanning-tree and OSPF routing?
    Can anyone verify the order as outlined in the section "Here is what I assume to be the correct order"

    So the order in which to apply TASKS is correct?
    also just to clarify the following TASK  based on your comments.
    Step 4- Add new VLANs to OSPF as passive interface
    On Switch 1 (core)
    We have this line of code
    router ospf 100
    router-id 192.168.1.10
    log-adjacency-changes
    passive-interface Vlan10
    passive-interface Vlan30
    passive-interface Vlan50
    passive-interface Vlan500
    network 192.168.0.2 0.0.0.0 area 0
    network 192.168.1.10 0.0.0.0 area 0
    network 192.168.30.254 0.0.0.0 area 0
    network 192.168.33.254 0.0.0.0 area 0
    network 192.168.51.254 0.0.0.0 area 0
    network 192.168.99.5 0.0.0.0 area 0
    network 192.168.200.254 0.0.0.0 area 0
    TASK: OSPF - Add new VLANs(40 & 41) to OSPF as Passive Interface
    ******* Begin Here  *********
    config t
    router ospf 100
    passive-interface vlan40
    passive-interface vlan41
    !WE SHOULD ADD THIS LINE OF CODE
    network 192.168.40.254 0.0.0.0 area 0
    network 192.168.41.254 0.0.0.0 area 0
    ******* End Here  *********
    RESULT:
    router ospf 100
    router-id 192.168.1.10
    log-adjacency-changes
    passive-interface Vlan10
    passive-interface Vlan30
    passive-interface Vlan40
    passive-interface Vlan41
    passive-interface Vlan50
    passive-interface Vlan500
    network 192.168.0.2 0.0.0.0 area 0
    network 192.168.1.10 0.0.0.0 area 0
    network 192.168.30.254 0.0.0.0 area 0
    network 192.168.33.254 0.0.0.0 area 0
    network 192.168.40.254 0.0.0.0 area 0
    network 192.168.41.254 0.0.0.0 area 0
    network 192.168.51.254 0.0.0.0 area 0
    network 192.168.99.5 0.0.0.0 area 0
    network 192.168.200.254 0.0.0.0 area 0
    Better??
    Again thanks...your feedback have been a tremendous help!

  • EDI - 753Routing Request and 754 Routing Instructions transactions- what SAP ECC6 EDI output type, msg type, msg code, basis idoc is best practice to generate the idoc?

    One of our Trading Partner wishes to implement the 753 Routing Request and 754 Routing Instructions.  Can anyone give me best practice answer the following Questions?  We are on SAP ECC6 R3
    What Application? i.e. V2, V7?
    What output condition to use?  i..e. LALE, LAT2, SEDI????
    What Message type?  i.e SHPADV?
    What Basic Idoc Type? i.e SHPMNT05?
    What Message Code?  i.e. SHPM?
    What Process Code?  i.e. SHPM??
    What Function Module? i.e. IDOC_OUTPUT_SHPMNT??
    Does the SAP Transpotation Module have to be configured for this to be implemented?
    Your comments are greatly appreciated, we have until Nov 1 to be compliant?

    Good Morning,
    While I did not get any responses from my question, yes, I was able to determine what needed to be configured.   I hope the below will help you: This is for SAP ECC6
    The output application for the 753 Routing Request is "V7"
    The output type is "SEDI"
    Transmission medium is "6"
    The Basic Idoc type is "Shipmnt05"
    when setting up your Partner Profile (WE20) add:Message Partner Role "SP" with Message type "SHPADV', Message coed "753", Basic Type "SHPMNT05", Message Control add Application "V7", Message type "SEDI", Process Code "SHPM".
    also http://scn.sap.com/thread/698368 pages 14 and 15 were helpful.
    I have not configured the Inbound 754.  For now the inbound 754 Routing Instructions will be emailed to our traffic department.
    Thank you,
    Have a great day,
    jane

  • I smashed my IPAD glass and after having it repaired I am no longer able to access wifi unless I am right next to my router.  Has anyone else had this experience and what is solution?

    I smashed my IPAD glass and after having it repaired I am no longer able to access wifi unless I am right next to my router.  Has anyone else had this experience and what is solution?

    Given the complexity in merely getting the thing open, that is likely. Or they forgot to reconnect it. See #14  and from #52 on down in: http://www.ifixit.com/Guide/Installing+iPad+2+GSM+Bluetooth-Wi-Fi+Antenna/6166/1

  • I´m doing a design for presale, where I will need a router what support PAT for 500 or a little more of users, it not need any more features only static routing and dhcp pool for 500 users, can you help me for know what router recommend?

    I´m doing a design for presale, where  I will  need a router what support PAT for 500 or a little more of users, it  not need any more features only static routing and dhcp pool for 500 users, can you help me for know what router recommend?

    What is your WAN speed currently and projected WAN speed in the next 3 years?

  • What is the proper config for the Airport Extreme when a Voice over IP device is between the cable modem and the router.

    What is the proper config for the Airport Extreme when a Voice over IP device is between the cable modem and the router.  Its a VoIPo device. The cable modem is connected to the VoIP WAN port and the LAN port on the device feeds the Airport Extreme.  The VOIP is working fine, and my Mac are getting 10. addresses from the Airport Extreme.  But I do get confict messages and lose my connection periodicaly.  Looking for help.

    Its a VoIPo device.
    Per chance, is this device the Grandstream HT502?

  • What is the fundamental difference between classful and classless routing?

    Hello to all,
    After reading several RFCs, guides and HOWTOs I am confused by an apparently trivial question - what is the basic, fundamental difference between classful and classless routing?
    I am well aware that - said in a very primitive way - the classful routing does not make use of netmasks and instead uses the address classes while the classless routing utilizes the netmasks and does not evaluate the address classes.
    However, already in 1985 the RFC 950 (Internet Standard Subnetting Procedure) stated that the networks can be further subnetted using the network mask. Since then the routers are expected to use network masks in the routing decision process in the precise way they use it nowadays. However, if the routers use network masks they are doing the classless routing, aren't they? Where is then the difference if we used to describe the 80's way of routing as a classful routing? Or was it already the classless routing? The RFCs about CIDR came gradually only in 1992 and 1993.
    If somebody could give me an insight into the key difference between classful and classless routing (and perhaps into the Internet history, how was the real routing done then) I would be most grateful.
    Thank you a lot!
    Regards,
    Peter

    Hello Mohammed,
    I am afraid we still have not understood each other ;) I am not looking for the algorithms used to select the best path. I am well aware of them, both Ford-Bellman and Dijkstra, and about their internals. By the way, these algorithms do not have any influence whether the routing is classful or classless because they deal with metrics, not with masks. For example, a classless EIGRP internally uses a distance-vector algorithm, not a SPF algorithm.
    I will try to explain once more what is my problem... There are two terms commonly used but badly defined: the classless routing and classful routing. Originally, I have thought that the classful routing works as follows:
    - The routing table consists only of classful destination networks (major nets), metrics and respective gateways. No network masks are stored in the table because we are classful, that is, we use exclusively the route classes and all entries in the routing table are already classful.
    - When routing a packet, the router looks at its destination IP address and determines the major net of this IP address (that is, the classful network that this IP address belongs to). Then it looks up the corresponding entry in the routing table and sends the packet to the respective gateway.
    I thought that the classful routing works in this way. I won't describe the classless routing - both of us know how do the today's routers select the next hop.
    However, in the RFCs 917 and 950 which were published in 1985, long ago before the term 'classless routing' was coined, the network mask was already defined and it was stated how the routers should work with it.
    Now I am confused. The terms classless addresses and classless routing were defined sometime in 1990's, therefore I assume that the routing before the invention of classless IP assignment can be in fact described as classful. In other words, I thought that the routing that was commonly used in 1980's did not use netmasks and can be described as classful because the notion of classlessness came first in 1990's. But now I see that netmasks were defined in 1985.
    Now where am I wrong? Do I understand the classful routing properly as I described it? Is it correct to talk about routing in that era as classful although the netmasks were already in use? Or was it already the classless routing?
    Basically I am trying to understand what was called the classful routing if the classless routing is said to be something different.
    Mohammed, I am most grateful to you for your patience and suggestions! Thank you indeed.
    Regards,
    Peter

  • So I wanna go about creating a iPhone app. What would be the easiest and cheapest route? Thanks everyone!

    So I wanna go about creating a iPhone app. What would be the easiest and cheapest route? Thanks everyone!

    Download Xcode, learn Objective-C, practice endlessly, purchase Apple Dev status, then publish your work.

  • What's the difference between routing and rate routing

    As we all know that routing normally used in discrete manufacture, and  rate routing used in REM, one of my client, the just use routing for REM instead of rate routing, are there any gurus can tell me some detail information about them?
    Thanks!
    Eric

    Hi,
    对于routing和rate routing来说，区别并不是很明显，但从流程的角度来说，routing适用于所有的离散型制造业，而rate routing适用于重复制造业！
    如果非要找出差别的话，就是routing可以定义并行序和可选序，而且rate routing只能定义并行序！
    具体的使用差别可以参考如下链接：
    http://help.sap.com/saphelp_45b/helpdata/en/03/bb1d0ca6e811d189010000e8323492/frameset.htm

  • HT201269 When I try to setup my new iPad air, I go through all the steps for the iCloud sign-in and choosing security questions and what not. But after I hit the agree to the terms and conditions... It says Apple ID could not be created because of a serve

    When I try to setup my new iPad air, I go through all the steps for the iCloud sign-in and choosing security questions and what not. But after I hit the agree to the terms and conditions... It says Apple ID could not be created because of a server error. Have no clue what to do... I've restarted the iPad and get the same message. But my internet works just fine.

    1. Turn router off for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings

  • VPN between ASA5505 Easy VPN Server and 881G Router as Easy VPN Client

    Hello,
    I have problem in VPN between ASA5505 Easy VPN Server and 881G Router as Easy VPN Client. ASA 5505 have 7.2.3 software and 881G router have 15.1 software.
    881G is configured as hardware client in network exstention mode, and it is placed behind NAT. ASA5505 is working as server. Same VPN Group works correctly from VPN software clients.
    When I send traffic from 881G client side, in show cryto sessin detail I see encrypted packets. But with same command I dont see decrypted packet on ASA5505 side. On both devices Phase 1 and Phase 2 are UP. 
    VPN is working when I replace ASA5505 with ASA5510  correctly with have 8.4.6 software. But problem is that i need to do this VPN between ASA5505 and 881G.
    Can you help me, how can I debug or troubleshoot this problem ?
    I am unable to update software on ASA5505 side.

    Hello,
    Hire is what my config look like:
    crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
    crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
    crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
    crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
    crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
    crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
    crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
    crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
    crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
    crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
    crypto dynamic-map outside_dyn_map 20 set pfs
    crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
    crypto dynamic-map outside_dyn_map 40 set pfs
    crypto dynamic-map outside_dyn_map 40 set transform-set ESP-3DES-SHA
    crypto dynamic-map outside_dyn_map 60 set pfs
    crypto dynamic-map outside_dyn_map 60 set transform-set ESP-3DES-SHA
    crypto dynamic-map outside_dyn_map 80 set pfs
    crypto dynamic-map outside_dyn_map 80 set transform-set ESP-3DES-SHA
    crypto dynamic-map outside_dyn_map 100 set pfs
    crypto dynamic-map outside_dyn_map 100 set transform-set ESP-3DES-SHA
    crypto dynamic-map outside_dyn_map 120 set pfs
    crypto dynamic-map outside_dyn_map 120 set transform-set ESP-3DES-SHA
    crypto dynamic-map outside_dyn_map 140 set pfs
    crypto dynamic-map outside_dyn_map 140 set transform-set ESP-AES-128-SHA
    crypto dynamic-map outside_dyn_map 160 set pfs
    crypto dynamic-map outside_dyn_map 160 set transform-set ESP-3DES-SHA
    crypto dynamic-map outside_dyn_map 180 set pfs
    crypto dynamic-map outside_dyn_map 180 set transform-set ESP-3DES-SHA
    crypto dynamic-map outside_dyn_map 200 set pfs
    crypto dynamic-map outside_dyn_map 200 set transform-set ESP-AES-256-SHA
    crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
    crypto map outside_map interface outside
    crypto isakmp enable outside
    crypto isakmp policy 1
     authentication pre-share
     encryption 3des
     hash sha
     group 2
     lifetime 86400
    crypto isakmp policy 2
     authentication pre-share
     encryption 3des
     hash sha
     group 1
     lifetime 86400
    crypto isakmp policy 3
     authentication pre-share
     encryption des
     hash sha
     group 2
     lifetime 86400
    tunnel-group HW-CLIENT-GROUPR type ipsec-ra
    tunnel-group HW-CLIENT-GROUP general-attributes
     address-pool HW-CLIENT-GROUP-POOL
     default-group-policy HW-CLIENT-GROUP
    tunnel-group HW-CLIENT-GROUP ipsec-attributes
     pre-shared-key *******
    group-policy HW-CLIENT-GROUP internal
    group-policy HW-CLIENT-GROUP attributes
     password-storage enable
     split-tunnel-policy tunnelspecified
     split-tunnel-network-list value cisco_splitTunnelAcl
     nem enable

  • How to setup apple time capsule with FIOSinternet and VZ router?)

    Hello,
    I have Apple time capsule and the VZ Router MI424WR. I current set up:
    1. VZ router - wireless off, the rest is standard
    2. Time capsule: Wireless on in Bridge mode
    Result: Internet works but the wireless network is very in-stable. Airtunes is nearly not usable.
    I searched in the Internet and there was several comments that is is not a good combination. Therefore it is recommended to convert the VZ router in a modem mode and use only the Time capsule as the router. I tried this several times I do not get it to work. I followed this procedure (http://data.agaric.com/node/2160) but then I need the PPPoE Account number and password. But there do I get this? The Verizon support was not really helpful.
    Please, is there a good and complete description to solve that issue?
    Thanks in advance
    Moebius

    Go back to your first setup ...
    Verizon router with wireless turned off
    Apple Time Casule with wireless turned on
    Method 1:
    With the Time Capsule in "Bridge Mode", if I remember correctly, you should connect the WAN port to one of the open ports on the Verizon router (I believe bridge mode also turns off the DHCP server on the Time Capsule, if not, find that and turn if off as well).   Change the addressing mode for the Time Capsule to "static" and assign it an address on the LAN which is not in use (choose something you know is out of the way but on the LAN -- I suggest 192.168.1.180 to start -- you can change it once you get everything working).
    If it doesn't work this way for you, move the cable from the WAN port on the Time Capsule to Port 1 and try again.
    Method 2:
    This results in a router behind a router setup, but unless you have devices connected directly to the Verizon router, it shouldn't be a problem.  
    With the Time Capsule disconnected from the Verizon router, turn on "Connection Sharing" (not bridge mode) and make sure DHCP is enabled on the Time Capsule.  You need to change the address range being used by the Time Capsule (which I think defaults to 192.168.1.x to another network -- I suggest, 192.168.2.x with a netmask of 255.255.255.0 and give the router an address of 192.168.2.1 on the LAN side.  Now, connection the WAN port to one of the Verizon router LAN ports.  If you had anything connected to the Verizon LAN ports, move those over to the LAN ports on the Time Capsule and reboot them.
    Method 3:
    This is the least desirable of the scenarios because it relies on Verizon's crappy radio in their router (the Time Capsule has a much better radio and support 802.11n as well as b and g) whereas Verizon's only support b/g.    Go back to the configuration for Method 1, but also turn OFF wireless on the Time Capsule and turn on wireless on the Verizon router.   Try both bridge scenarios described -- using the WAN port first and if that didn't work, then moving the connection to port 1.
    There is no scenario where you can place the Verizon router behind the Time Capsule -- since I believe Verizon is using all MoCA connections for the WAN side of their connection (you'd have to get Verizon to convert you to ethernet WAN and then they would not support you most likely for any STB issues with your FiOS if the Time Capsule was between the ONT and their router ... so don't even bother wasting time there ... more headaches than it would be worth.
    If you're still not sure exactly what each configuration screen on the time capsule should say, post some screen snaps (or the configuration settings/choices which you are unsure about and someone will likely know the answer here).

  • Outlook 2010 and 2013 are unable to connect but OWA (and mail routing) works fine

    Hi-
    Not sure why but this past Sunday (just after DST adjustment) outlook clients (using 2010 and 2013) were unable to connect to an Exchange 2013 server.  OWA and mail routing (internal and external) is working fine.  I've even tried on multiple machines
    and all of them experience the same issue.  On a new machine with a fresh version of outlook 2013 installed here is what happens:
    Click on Outlook 2013
    Click Next until the account setup is displayed.
    Name and email is auto-populated
    Established network connection is good
    Searching for email address settings is good (once the self-signed exchange 2013 cert is accepted)
    And then the logging onto the mail server fails.  The first pop-up is:
    The Connection to Microsoft Exchange is unavailable.  Outlook must be online or connected to complete this action.
    Clicking "OK" is followed up with a window with the Microsoft Exchange connection info.
    It lists Microsoft Exchange server which is populated with: GUID@<domain suffix>
    Mailbox which is populated with: =SMTP:<Valid Email address>
    On the Exchange Server I have noticed that the Web Management Service (WMSVC) is stopped and will not start.  Starting the service outputs:
    EventID 7024
    "The Web Management Service terminated with the following service-specific error:  Unspecified error"
    Not really helpful :)
    Since this is only happening with Outlook on multiple clients I'm expecting something with Exchange or the ability for outlook to connect to exchange.
    Thanks in advance!

    Hi
    I know this is an old post, but I'm having a very similar issue. I have CU6 installed and all other client connectivity apart from internal Outlook connectivity is working fine. I have distributed the new Self-Signed Certificate and the tested to verify
    the clients trust it. I have tried on multiple machine with multiple accounts and none of them connect.
    I'm at the stage of reinstalling, but I would rather troubleshoot the problem, just in case ever hit the same wall in the future. I have run Test-OutlookConnectivity with the following output;
    RunspaceId         : 71f8d740-c499-4bbe-8baf-9cbb12566fb8
    Server             : PW-SC-01.companyname.local
    MonitorIdentity    : Outlook.Protocol\OutlookRpcDeepTestProbe\NEW2013
    RequestId          : 75641e34-aa49-4fce-aad7-181b56dd7b29
    ExecutionStartTime : 10/11/2014 13:50:03
    ExecutionEndTime   : 10/11/2014 13:50:03
    Error              : Error 0x6ba (The RPC server is unavailable) from ClientAsyncCallState.CheckCompletion: 
                         RpcAsyncCompleteCall 
                         EEInfo: ComputerName: n/a
                         EEInfo: ProcessID: 14544
                         EEInfo: Generation Time: 2014-11-10 13:50:03.737
                         EEInfo: Generating component: 2
                         EEInfo: Status: 0x000006BA
                         EEInfo: Detection location: 1710
                         EEInfo: Flags: 0
                         EEInfo: NumberOfParameters: 1
                         EEInfo:    prm[0]: Long val: 0 (0x00000000)
                         EEInfo: ComputerName: n/a
                         EEInfo: ProcessID: 14544
                         EEInfo: Generation Time: 2014-11-10 13:50:03.737
                         EEInfo: Generating component: 13
                         EEInfo: Status: 0x000006BA
                         EEInfo: Detection location: 1352
                         EEInfo: Flags: 0
                         EEInfo: NumberOfParameters: 1
                         EEInfo:    prm[0]: Long val: -1073606646 (0xC002100A)
                         EEInfo: ComputerName: n/a
                         EEInfo: ProcessID: 14544
                         EEInfo: Generation Time: 2014-11-10 13:50:03.737
                         EEInfo: Generating component: 14
                         EEInfo: Status: 0xC002100A
                         EEInfo: Detection location: 1380
                         EEInfo: Flags: 0
                         EEInfo: NumberOfParameters: 2
                         EEInfo:    prm[0]: Long val: 12175 (0x00002F8F)
                         EEInfo:    prm[1]: Unicode string: /rpc/rpcproxy.dll?PW-SC-01.companyname.local:6001
                         EEInfo: ComputerName: n/a
                         EEInfo: ProcessID: 14544
                         EEInfo: Generation Time: 2014-11-10 13:50:03.737
                         EEInfo: Generating component: 14
                         EEInfo: Status: 0x00010000
                         EEInfo: Detection location: 1385
                         EEInfo: Flags: 0
                         EEInfo: NumberOfParameters: 2
                         EEInfo:    prm[0]: Long val: 8 (0x00000008)
                         EEInfo:    prm[1]: Binary Buffer: [48-1263-10248-1262-126-9632122164676121-3988104-118-11373-61-94
                         -111-112-98-1217048136942-12272-122-91311550483449324830638543192311910198979999101115115461121199
                         91111091091154699111461171074830231349524949485349505348484990231349574949485349505348484990483449
                         324830638543192311910198979999101115115461121199911110910911546991114611710748-12613448136942-1227
                         2-122-913111503-126115048-1261102-126110-22103-15-109-16-121-119-3121-4-106119-119-9369122-5779121
                         719-98-24-67-32918-98-236-19-10715326827-76102-61100108-12718-438331-37109-102-57-9942-11389-10374
                         -77-5-4-107109-11847342222-63-48-7468-17-1067033-56111-33-54-16-105-62-76-1282011-1664-12158-4915-
                         88-53-9-29-2994-49-54-5211-1364-212121-12396-127-353-396185117-681229-434246070-109818119-4858-128
                         -106-1279248-49110-44-81-121494199-118-17-106-71106828294-93-110-110-106-415084-127126-45-12331421
                         -61-2757-24-128-28-25111-52113121-56-98-5821527282-47255245104-111-55-1099747-115-11172-287-12526-
                         79-12430-119421360-107-6430-5410282-52-51-128533354-116672757-77-75-111-72-118-10114-84484825-40-1
                         8-70-24-9111-61-5391-8034125-12632-16-19-128112030-8-427523101-93-127-5348-127-5648146385291511-14
                         4325-9648-127-110638529174-127-11848-127-121-12623119101989799991011151154611211999111109109115469
                         911146117107-1262211211945115994548494611211999111109109115461081119997108-12626651171161116810511
                         59911111810111446808767111109109115461081119997108-12626651171161116810511599111118101114468087671
                         11109109115469911146117107-12613808767111109109115461081119997108-12613808767111109109115469911146
                         11710748196385293741248106843615573148126385291911-14248048136942-12272-122-913115503-12611081-930
                         6613-74953718-12745-14-25-94107-80-5-45-2231536-1728-12897-8587577-1252765-892896-83-10267-7926-20
                         -9841-1079-12-29-4315671111357-684036-40-5129-91-24-461066-12306-65-9118-89115191071-30-20-1067161
                         -83-91-74105-931649-48-96126-13-71-118-8967567-40-64-104-113-31-51-102357125100-50113-103-113123-9
                         873-627067-25-908-10131118125122-71-115-37-1850-1055851-31410-77-7312-36848124-26104-10711043-2048
                         -48-12666611759121127-2960-1571-9-95-98-1036911610-74221-32-25114-108749933-7147562114-3635-101-81
                         -1058-73108-61-78-128-116-715155112714-37-18-84-8331-2716-1174257-76-5-1598-15-12875-98-7329632178
                         -10714-123-6312212-1028359-56-76-683-873987-2120-845954-7617-71-57999828110], size=926
    Exception          : Microsoft.Exchange.Rpc.ServerUnavailableException: Error 0x6ba (The RPC server is unavailable) 
                         from ClientAsyncCallState.CheckCompletion: RpcAsyncCompleteCall 
                         EEInfo: ComputerName: n/a
                         EEInfo: ProcessID: 14544
                         EEInfo: Generation Time: 2014-11-10 13:50:03.737
                         EEInfo: Generating component: 2
                         EEInfo: Status: 0x000006BA
                         EEInfo: Detection location: 1710
                         EEInfo: Flags: 0
                         EEInfo: NumberOfParameters: 1
                         EEInfo:    prm[0]: Long val: 0 (0x00000000)
                         EEInfo: ComputerName: n/a
                         EEInfo: ProcessID: 14544
                         EEInfo: Generation Time: 2014-11-10 13:50:03.737
                         EEInfo: Generating component: 13
                         EEInfo: Status: 0x000006BA
                         EEInfo: Detection location: 1352
                         EEInfo: Flags: 0
                         EEInfo: NumberOfParameters: 1
                         EEInfo:    prm[0]: Long val: -1073606646 (0xC002100A)
                         EEInfo: ComputerName: n/a
                         EEInfo: ProcessID: 14544
                         EEInfo: Generation Time: 2014-11-10 13:50:03.737
                         EEInfo: Generating component: 14
                         EEInfo: Status: 0xC002100A
                         EEInfo: Detection location: 1380
                         EEInfo: Flags: 0
                         EEInfo: NumberOfParameters: 2
                         EEInfo:    prm[0]: Long val: 12175 (0x00002F8F)
                         EEInfo:    prm[1]: Unicode string: /rpc/rpcproxy.dll?PW-SC-01.companyname.local:6001
                         EEInfo: ComputerName: n/a
                         EEInfo: ProcessID: 14544
                         EEInfo: Generation Time: 2014-11-10 13:50:03.737
                         EEInfo: Generating component: 14
                         EEInfo: Status: 0x00010000
                         EEInfo: Detection location: 1385
                         EEInfo: Flags: 0
                         EEInfo: NumberOfParameters: 2
                         EEInfo:    prm[0]: Long val: 8 (0x00000008)
                         EEInfo:    prm[1]: Binary Buffer: [48-1263-10248-1262-126-9632122164676121-3988104-118-11373-61-94
                         -111-112-98-1217048136942-12272-122-91311550483449324830638543192311910198979999101115115461121199
                         91111091091154699111461171074830231349524949485349505348484990231349574949485349505348484990483449
                         324830638543192311910198979999101115115461121199911110910911546991114611710748-12613448136942-1227
                         2-122-913111503-126115048-1261102-126110-22103-15-109-16-121-119-3121-4-106119-119-9369122-5779121
                         719-98-24-67-32918-98-236-19-10715326827-76102-61100108-12718-438331-37109-102-57-9942-11389-10374
                         -77-5-4-107109-11847342222-63-48-7468-17-1067033-56111-33-54-16-105-62-76-1282011-1664-12158-4915-
                         88-53-9-29-2994-49-54-5211-1364-212121-12396-127-353-396185117-681229-434246070-109818119-4858-128
                         -106-1279248-49110-44-81-121494199-118-17-106-71106828294-93-110-110-106-415084-127126-45-12331421
                         -61-2757-24-128-28-25111-52113121-56-98-5821527282-47255245104-111-55-1099747-115-11172-287-12526-
                         79-12430-119421360-107-6430-5410282-52-51-128533354-116672757-77-75-111-72-118-10114-84484825-40-1
                         8-70-24-9111-61-5391-8034125-12632-16-19-128112030-8-427523101-93-127-5348-127-5648146385291511-14
                         4325-9648-127-110638529174-127-11848-127-121-12623119101989799991011151154611211999111109109115469
                         911146117107-1262211211945115994548494611211999111109109115461081119997108-12626651171161116810511
                         59911111810111446808767111109109115461081119997108-12626651171161116810511599111118101114468087671
                         11109109115469911146117107-12613808767111109109115461081119997108-12613808767111109109115469911146
                         11710748196385293741248106843615573148126385291911-14248048136942-12272-122-913115503-12611081-930
                         6613-74953718-12745-14-25-94107-80-5-45-2231536-1728-12897-8587577-1252765-892896-83-10267-7926-20
                         -9841-1079-12-29-4315671111357-684036-40-5129-91-24-461066-12306-65-9118-89115191071-30-20-1067161
                         -83-91-74105-931649-48-96126-13-71-118-8967567-40-64-104-113-31-51-102357125100-50113-103-113123-9
                         873-627067-25-908-10131118125122-71-115-37-1850-1055851-31410-77-7312-36848124-26104-10711043-2048
                         -48-12666611759121127-2960-1571-9-95-98-1036911610-74221-32-25114-108749933-7147562114-3635-101-81
                         -1058-73108-61-78-128-116-715155112714-37-18-84-8331-2716-1174257-76-5-1598-15-12875-98-7329632178
                         -10714-123-6312212-1028359-56-76-683-873987-2120-845954-7617-71-57999828110], size=926
                            at Microsoft.Exchange.Rpc.ClientAsyncCallState.CheckCompletion()
                            at Microsoft.Exchange.Rpc.ExchangeClient.ClientAsyncCallState_Connect.End(IntPtr& 
                         contextHandle, TimeSpan& pollsMax, Int32& retryCount, TimeSpan& retryDelay, String& dn
    PoisonedCount      : 0
    ExecutionId        : 63105129
    SampleValue        : 33.5194
    ExecutionContext   :     Mailbox logon verification
                                 EMSMDB.Connect()
                                 Task produced output:
                                 - TaskStarted = 10/11/2014 13:50:03
                                 - TaskFinished = 10/11/2014 13:50:03
                                 - Exception = Microsoft.Exchange.Rpc.ServerUnavailableException: Error 0x6ba (The RPC 
                         server is unavailable) from ClientAsyncCallState.CheckCompletion: RpcAsyncCompleteCall 
                         EEInfo: ComputerName: n/a
                         EEInfo: ProcessID: 14544
                         EEInfo: Generation Time: 2014-11-10 13:50:03.737
                         EEInfo: Generating component: 2
                         EEInfo: Status: 0x000006BA
                         EEInfo: Detection location: 1710
                         EEInfo: Flags: 0
                         EEInfo: NumberOfParameters: 1
                         EEInfo:    prm[0]: Long val: 0 (0x00000000)
                         EEInfo: ComputerName: n/a
                         EEInfo: ProcessID: 14544
                         EEInfo: Generation Time: 2014-11-10 13:50:03.737
                         EEInfo: Generating component: 13
                         EEInfo: Status: 0x000006BA
                         EEInfo: Detection location: 1352
                         EEInfo: Flags: 0
                         EEInfo: NumberOfParameters: 1
                         EEInfo:    prm[0]: Long val: -1073606646 (0xC002100A)
                         EEInfo: ComputerName: n/a
                         EEInfo: ProcessID: 14544
                         EEInfo: Generation Time: 2014-11-10 13:50:03.737
                         EEInfo: Generating component: 14
                         EEInfo: Status: 0xC002100A
                         EEInfo: Detection location: 1380
                         EEInfo: Flags: 0
                         EEInfo: NumberOfParameters: 2
                         EEInfo:    prm[0]: Long val: 12175 (0x00002F8F)
                         EEInfo:    prm[1]: Unicode string: /rpc/rpcproxy.dll?PW-SC-01.companyname.local:6001
                         EEInfo: ComputerName: n/a
                         EEInfo: ProcessID: 14544
                         EEInfo: Generation Time: 2014-11-10 13:50:03.737
                         EEInfo: Generating component: 14
                         EEInfo: Status: 0x00010000
                         EEInfo: Detection location: 1385
                         EEInfo: Flags: 0
                         EEInfo: NumberOfParameters: 2
                         EEInfo:    prm[0]: Long val: 8 (0x00000008)
                         EEInfo:    prm[1]: Binary Buffer: [48-1263-10248-1262-126-9632122164676121-3988104-118-11373-61-94
                         -111-112-98-1217048136942-12272-122-91311550483449324830638543192311910198979999101115115461121199
                         91111091091154699111461171074830231349524949485349505348484990231349574949485349505348484990483449
                         324830638543192311910198979999101115115461121199911110910911546991114611710748-12613448136942-1227
                         2-122-913111503-126115048-1261102-126110-22103-15-109-16-121-119-3121-4-106119-119-9369122-5779121
                         719-98-24-67-32918-98-236-19-10715326827-76102-61100108-12718-438331-37109-102-57-9942-11389-10374
                         -77-5-4-107109-11847342222-63-48-7468-17-1067033-56111-33-54-16-105-62-76-1282011-1664-12158-4915-
                         88-53-9-29-2994-49-54-5211-1364-212121-12396-127-353-396185117-681229-434246070-109818119-4858-128
                         -106-1279248-49110-44-81-121494199-118-17-106-71106828294-93-110-110-106-415084-127126-45-12331421
                         -61-2757-24-128-28-25111-52113121-56-98-5821527282-47255245104-111-55-1099747-115-11172-287-12526-
                         79-12430-119421360-107-6430-5410282-52-51-128533354-116672757-77-75-111-72-118-10114-84484825-40-1
                         8-70-24-9111-61-5391-8034125-12632-16-19-128112030-8-427523101-93-127-5348-127-5648146385291511-14
                         4325-9648-127-110638529174-127-11848-127-121-12623119101989799991011151154611211999111109109115469
                         911146117107-1262211211945115994548494611211999111109109115461081119997108-12626651171161116810511
                         59911111810111446808767111109109115461081119997108-12626651171161116810511599111118101114468087671
                         11109109115469911146117107-12613808767111109109115461081119997108-12613808767111109109115469911146
                         11710748196385293741248106843615573148126385291911-14248048136942-12272-122-913115503-12611081-930
                         6613-74953718-12745-14-25-94107-80-5-45-2231536-1728-12897-8587577-1252765-892896-83-10267-7926-20
                         -9841-1079-12-29-4315671111357-684036-40-5129-91-24-461066-12306-65-9118-89115191071-30-20-1067161
                         -83-91-74105-931649-48-96126-13-71-118-8967567-40-64-104-113-31-51-102357125100-50113-103-113123-9
                         873-627067-25-908-10131118125122-71-115-37-1850-1055851-31410-77-7312-36848124-26104-10711043-2048
                         -48-12666611759121127-2960-1571-9-95-98-1036911610-74221-32-25114-108749933-7147562114-3635-101-81
                         -1058-73108-61-78-128-116-715155112714-37-18-84-8331-2716-1174257-76-5-1598-15-12875-98-7329632178
                         -10714-123-6312212-1028359-56-76-683-873987-2120-845954-7617-71-57999828110], size=926
                            at Microsoft.Exchange.Rpc.ClientAsy
    FailureContext     : 
    ExtensionXml       : 
    ResultType         : Failed
    RetryCount         : 0
    ResultName         : 75641e34aa494fceaad7181b56dd7b29-OutlookRpcDeepTestProbe/NEW2013
    IsNotified         : False
    ResultId           : 1748063
    ServiceName        : InvokeNow
    StateAttribute1    : Momt
    StateAttribute2    : UnknownIssue
    StateAttribute3    : PW-SC-01.companyname.local
    StateAttribute4    : Unknown
    StateAttribute5    : {C54AD38D-1E00-4F53-ABAE-26518C3FF82F}
    StateAttribute6    : 0
    StateAttribute7    : 0
    StateAttribute8    : 0
    StateAttribute9    : 0
    StateAttribute10   : 0
    StateAttribute11   : Momt
    StateAttribute12   : 
    StateAttribute13   : VgEAVAdXaW5kb3dzQwBBCEtlcmJlcm9zTA9QV0NPTU1TXG5hdGhhbmhVLlMtMS01LTIxLTIwNTc0OTEwMzItMzE4NDA2NDk3OC
                         0xNTQ2MTE0ODM1LTI2MzJHHQAAAAcAAAAtUy0xLTUtMjEtMjA1NzQ5MTAzMi0zMTg0MDY0OTc4LTE1NDYxMTQ4MzUtNTEzBwAA
                         AAdTLTEtMS0wBwAAAAdTLTEtNS0yBwAAAAhTLTEtNS0xMQcAAAAIUy0xLTUtMTUHAADAE1MtMS01LTUtMC0zNDc3ODcxMTMHAA
                         AALlMtMS01LTIxLTIwNTc0OTEwMzItMzE4NDA2NDk3OC0xNTQ2MTE0ODM1LTQxODcHAAAALVMtMS01LTIxLTIwNTc0OTEwMzIt
                         MzE4NDA2NDk3OC0xNTQ2MTE0ODM1LTUxMgcAAAAuUy0xLTUtMjEtMjA1NzQ5MTAzMi0zMTg0MDY0OTc4LTE1NDYxMTQ4MzUtND
                         E3NAcAAAAuUy0xLTUtMjEtMjA1NzQ5MTAzMi0zMTg0MDY0OTc4LTE1NDYxMTQ4MzUtMzU3MAcAAAAuUy0xLTUtMjEtMjA1NzQ5
                         MTAzMi0zMTg0MDY0OTc4LTE1NDYxMTQ4MzUtNDEyMgcAAAAuUy0xLTUtMjEtMjA1NzQ5MTAzMi0zMTg0MDY0OTc4LTE1NDYxMT
                         Q4MzUtMTE2NAcAAAAuUy0xLTUtMjEtMjA1NzQ5MTAzMi0zMTg0MDY0OTc4LTE1NDYxMTQ4MzUtMTE0MQcAAAAuUy0xLTUtMjEt
                         MjA1NzQ5MTAzMi0zMTg0MDY0OTc4LTE1NDYxMTQ4MzUtNDE1MwcAAAAuUy0xLTUtMjEtMjA1NzQ5MTAzMi0zMTg0MDY0OTc4LT
                         E1NDYxMTQ4MzUtNDE0NQcAAAAtUy0xLTUtMjEtMjA1NzQ5MTAzMi0zMTg0MDY0OTc4LTE1NDYxMTQ4MzUtNTE4BwAAAC5TLTEt
                         NS0yMS0yMDU3NDkxMDMyLTMxODQwNjQ5NzgtMTU0NjEx
    StateAttribute14   : 
    StateAttribute15   : 
    StateAttribute16   : 0
    StateAttribute17   : 0
    StateAttribute18   : 0
    StateAttribute19   : 0
    StateAttribute20   : 0
    StateAttribute21   : /o=companyname/ou=first administrative group/cn=Recipients/cn=NathanH
    StateAttribute22   : EMSMDB.Connect()
    StateAttribute23   : https://pw-sc-01.companyname.local:444/rpc/rpcproxy.dll?PW-SC-01.companyname.local:6001
    StateAttribute24   : Negotiate
    StateAttribute25   : [33]10/11/2014 13:50:03 [FAILED!] EMSMDB.Connect(); 
    Identity           : fcd6159dd8fe42aebf10100cc4934356
    IsValid            : True
    ObjectState        : New

  • Using a WRT54G as a second wireless and wired router on a LAN

    I have setup a WRT54G as a second wired and wireless router on my local LAN.
    The WAN wired side of the WRT54G is setup completely DHCP. It gets IP 192.168.1.104 most of the time. (I have used a PC with DHCP on theis ethernet wire and it gets to the internet OK). 
    The LAN side of the WRT54G is setup as 192.168.20.1 and all wireless and wired devices connecting to it get ips of 192.168.20.xxx and communicate between them selfs perfectly.  However, none of them can get to the internet through the WRT54G.  What have I done wrong?
    Thank You

    I guess your WRT54G is not connected to Internet directly, but it's connected to another router that has Internet access.
    If this is the case, you can configure this device as access point/hub only in order to get Internet access from the other router. Ignore the WAN connection on this WRT54G, just connect both router's LAN port with crossover cable.. After that configure the WRT54G's wireless setting. You can get more detailed info on how to do it in following article:
    Quick Guide to Configure Wireless Router as Access Point
    Hope helps..

  • CE dial-in to PE. What routing protocol I should use ?

    Hi,
    Situation - CE connected to PE via some ethernet interface (primary) and ISDN dial-up as backup, so I need to use some dynamic routing protocol to distribute customers networks to other sites. Now I'm looking towards extended (triggered) RIP, but maybe there are better choices?
    As I know, only triggereg RIP and OSPF supports 'on-demand' circuits, but OSPF isn't recommended as CE-PE protocol because it has no VRF awareness and we would have to run separate OSPF process for every VRF what isn't nice. This makes RIP only choice? Or there are another possibilities, maybe BGP ?

    Hi,
    over all there is static, RIPv2, EIGRP, OSPF, ISIS and BGP for PE-CE.
    Well floating static alone seems no possibility in your case.
    RIP and EIGRP have some issues when running on redundant links into the VPN (possibility of routing loops), which would be the case with backup active and primary coming back. Depending on the exact topology there might or might not be a workaround.
    OSPF has to be run as separate processes. Might be tough on PE resources, depending on your exact setup details. Other than that it does the job.
    eBGP with ebgp-multihop and static routes is an option. So eBGP doesn´t go down, just is directed over backup link in case primary is down.
    Pick your poison! :-)
    regards
    Martin

Maybe you are looking for

  • SQL Functions to Update XML Data

    Hi, Can anybody please tell me whether SQL Functions to Update XML Data (such as updateXML, insertChildXML, insertXMLbefore etc) are available with oracle 9i or not? Please tell me.

  • Application doesn't viewed in Workspace

    Hi, I'm using HFM 9.3 version with oracle 10G.I configured shared services,HFM & hyperion repoting analysis. I can able to create application in HFM and load data into it.But i can't able to view the application in the workspace. I have given provisi

  • Is it possible to down grade to iTunes 10 in Mountain Lion?

    I had no problems using iTunes10 on Lion. Now after upgrading to iTunes 11 and to Mountain Lion, I cannot import my music from CDs.

  • Stop inporting of duplicate files

    I back up all my RAW files from a wedding to my Epson P5000. Sometimes my assistant or I will backup the same CF twice. I have 'do not import duplicates' set, however, Aperture always imports them anyway. Anyway to set this as a default that works or

  • Have to use GET LINK feature to open pics with BB8330

    Can anyone help with this? Purchased 2 new BB8330 curve through best buy (sprint is the carrier) at the same time, one for me and the wife. She gets her MMS pics right away, I have to use the link to go and view the picture. Called help desk from spr