E65 can't recognize HS-31 headset

I bought a HS-31 stereo headset, and I realised that the phone can't recognize it. But can recognize the HS-5 mono headset which was packed with the phone together.
Based on offical Nokia web site http://europe.nokia.com/A4397267 this headset (HS-31) is one of the compatibility accessories.
I tried to find where can I set connected devices, and finally I found that:
tools ->settings ->phone ->enhanced settings ->others detected as -> mono headset or text phone. There is no opportunity to set stereo headset. Fw:2.0633.65.01
Thanks!

Problem solved. After not receiving any suggestions from the Forum - and having no success on my own - I went to the closest ATT store (about 40 miles away from our rural home) and explained the problem to one of the ATT salespersons. He said the BB had probably frozen. I handed him my 8700c, he took off the battery cover, took out the battery, partially removed (and then reinserted the SIM card), replaced the battery, replaced the cover, handed the BB back to me and said it should self-correct, re-boot and be good as new in less than three minutes. Once the screen re-appeared, I tried to connect the Soundport Flex ear bud and it worked perfectly. I was in and out of the store in five minutes. Impressive!
Apparently "freezing" is not uncommon after the BB has been on, in his words, a "long time." In my case that would be, most days 18 hours and some days on all day/night for two days if I've forgotten to turn it off.
Anyway I'm thrilled that ATT solved the problem and hope the solution is useful to those of you who may experience the same problem.
Bret

Similar Messages

Can I connect multiple bluetooth headsets to my iPod at the same time?

Can I connect multiple bluetooth headsets to my iPod at the same time?

After 1 or 2 reboot system I managed was enter my MacBook Pro my AppleID and it is connected I managed so to have the flow of "Stream Photo" from my iPhone 4 S to my iPad 2 on the MacBook. But incomprehensible how the function "find my Mac" not recognize the MacBook Pro in "iCloud.com" or App in the iPhone 4 / iPad 2. Thus I do little "see the iMac, iPhone 4 and my iPad 2" and not the Macbook Pro !?!
I am sorry about my English quality but I'm not English speaking this text is translated by Microsoft Translator.

After I upgraded to Yosemite iphoto can't recognize my backup CDs which were created in iLife09. Ihave the original applications install disk and my old hard drive(I upgraded to SSD). How do I get a n iphoto back to read by old CDs?

After I upgraded to Yosemite,iPhoto can't recognize my backup CDs created in iLife 09. The applications install disk won't install iphoto because iphoto 9.5 is already installed..I updated to a SSD and have the original Hard Drive with an updated iphoto which recognized the older CDs(thanks to iphoto expander). I thought that the iphoto that transferred with the new hard drive was the same as what was on the old one. I guess it wasn't. I really need to access my backups. HELP

Later version of iPhoto write to the library on opening, and so cannot open libraries on optical media, as that cannot be written to. Further, optical media is going e way of the floppy disk. Therefore, you need to use a different form of archiving and back up going forward.
To allow iPhoto to open these libraries you need to copy them to your Mac or an attached external disk.
To merge them into an existing Library will require that you use either Aperture (if you have it) or iPhoto Library Manager.

My new MacBook Pro and Imac can't recognize my digital video camera (Canon GL2) via FireWire 800 9 pin to 4 pin cable.

My new MacBook Pro and Imac can't recognize my digital video cameras (Canon GL2 or Sony) via FireWire 800 9 pin to 4 pin cable. I've tried two different cables. Any suggestions? Thanks.

Is your DV camera plugged in to AC power (not batteries only)? When you step down from 9 pins to 4 pins, you lose the "power" pins.

Remote Disc Can't recognize Blank disc, but it does recognize other discs. I am trying to burn something from my itunes on my mac mini to a blank disc on my windows computer. What could be wrong?

Remote Disc Can't recognize Blank disc, but it does recognize other discs. I am trying to burn something from my itunes on my mac mini to a blank disc on my windows computer. What could be wrong?
I can see other discs such as music and stuff so I know I have installed it correctly but how come I can't see the blank disc that I need to burn?

You can't burn discs remotely, you can only read data discs remotely (i.e. you cannot play movie DVDs either).
Either copy the files to the remote computer or get an external drive.

Can I share a bluetooth headset with my iPhone 4 and my Mac?

Can I share a bluetooth headset with my iPhone 4 and my Mac? I don't mean both at the same time. I just think it's silly to buy a separate headset for each. I'd like to be able to sometimes use the headset with my Mac and other times use it with my iPhone. Is this possible? How hard is it to set up and is it annoying to switch over from one to the other.
The headset would be used 75% of the time with my iPhone.

Contacts can be synced direct with Outlook 2003, 2007, or 2010 via the iTunes sync process along with syncing calendar events, notes, and reminders. This is selected under the Info tab for your iPhone sync preferences with iTunes.
If you don't use Outlook for contacts - your Outlook address book is empty, before the first sync for this data enter one contact in the Outlook address book. This will provide a merge prompt with the first sync for this data.
Or if your iPhone 4 is running iOS 6, you can create your hotmail account using the hotmail account preset with the iPhone's Mail app per the instructions included with this link. If your iPhone 4 is not running iOS 6, you will need to manually create the account as an Exchange account.
http://www.wikihow.com/Sync-a-Hotmail-Account-on-an-iPhone
Regardless if you have any contacts available in your hotmail online address book, you should be provided a merge prompt when turning contacts on for over the air syncing with your hotmail account settings on the iPhone, which you want to select. This will merge your existing iPhone contacts with your hotmail online address book and merge your hotmail online address book with your iPhone contacts.
To have the contacts available on the iPhone 5, create your hotmal account with the Mail.app on the iPhone 5 followed by turning contacts on for over the air syncing with the account settings on the iPhone.
Or after syncing your iPhone 4 contacts direct with your Outlook address book, sync your Outlook contacts with the iPhone 5.

Can I use a bluetooth headset and a bluetooth isimple remote at the same time?

I use a wireless headphone when I ride my motorcycle and its great, but I would like to hook up a remote that would allow me to skip tracks, pause, and adjust volume.
I found this:
http://www.amazon.com/iSimple-Portable-Wireless-Smartphones-Bluetooth/dp/B00KPZN 5UC/ref=sr_1_1?ie=UTF8&qid=1428870380&sr=8-1&keywords=isimple+remote
I need to know if I can use it and my wireless headphones at same time before I buy it though since they both use bluetooth

There is no wired controller I know of. Your wired headphones should have a controller on them.
You can connect more than one BT device to an iPhone you just cannot use more than one A2DP stereo Bluetooth device or Handsfree Headset. Check with the iSimple people and see which BT profile they are using for their remote. If it is low power bluetooth then you can use it with your headset.

I updated my iTunes to 11.3.0.54 yesterday and since then iTunes can't recognize my iPhone 4s and even an iPod

I updated my iTunes to 11.3.0.54 yesterday and since then iTunes can't recognize my iPhone 4s and even an iPod
what to do?

Hello,
Only option is upgrading your Mac's OSX, since Apple will not allow iOS to go backwards.
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 4GB at least, more if you can afford it)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
Call Apple Sales...in the US: 1-800-MY-APPLE. Or Support... 1-800-275-2273
Other countries...
http://support.apple.com/kb/HE57
It looks like they might still have it...
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA

I had my macbook pro system restored at an apple store and now my itunes can't recognize my iPhone. What should I do?

I had my macbook pro system restored at an apple store and now my itunes can't recognize my iPhone. What should I do?

Try these: iPhone, iPad, or iPod touch: Device not recognized in iTunes for Mac OS X, http://support.apple.com/kb/TS1591

PDF files shown as' damaged or used a format preview can't recognize' once I save them to a thumbdrive

Hi,
I'm using a Macbook Pro system version 10.10.2.All PDF files (actually regardless of the format) are shown as' damaged or used a format preview can't recognize' once I copy them to a thumb-drive from the Mac. The file names end correctly as .pdf. I am sure that the thumb drive was in a good condition before I used it on the Mac and I tried two other new thumb drives but the problem persisted. Can anyone tell me how to solve the problem? Thanks a lot!!

Please repartition and format the flash drive for a Mac. It's likely formatted for a PC.
Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.

Can Preview recognize hyperlinks (embedded URLs) in PDF docs?

I've been trying to research this online but I get conflicting answers. Can Preview recognize hyperlinks (embedded URLs) in PDF documents? If it can, then how are those created?
I am using Adobe Acrobat Professional v7 (on Windows) and Preview doesn't appear to see the links I've created. Acrobat Reader on both Mac and Windows works fine.

I don't have any documents that I can test straight off, but I know Preview is limited when it comes to some of the advanced features of PDFs and you have to use Acrobat Reader for those. This might be another of those.

I can't recognize the DVD RW Optiarc

Dear Sir,
My system can't recognize the DVD RW on my Entertainment Notebook HP Pavilion dv6815el.
I've upgrade it to Windows 7 12 months ago, without problem, but from 5 days I've big troubles!
Maybe for some mistake, using Nero or Alcool virtual drivers, there is an incompatibily beetwen drivers.
Iìve suddenly unistalled those programs, but as in Device manager as on windows explorer I can't see it anymore
It seem to work only fiew seconds lighting and noising, when I load a CD or DVD, after it stops.
I tried with fixwin and by modifiyng regedit; now I tried your checks as suggested, but no results; there isnt!
And I can't open DVD/CD-ROM Drives find it in order to find and uninstall it..
I find only the HD drive and, if plugged, a external DVD RW.
Also restoring old system images, I cannot fix the big bug.
By driverwhiz I can see it; Pls see my shots as follows:
http://i192.photobucket.com/albums/z170/pamwagner47/devices.jpg
http://i192.photobucket.com/albums/z170/pamwagner47/scandriverwhiz.jpg
http://i192.photobucket.com/albums/z170/pamwagner47/reg.jpg
http://i192.photobucket.com/albums/z170/pamwagner47/reg1.jpg
At last, I can't see, as in other models of HP notebooks, in the bottom, under the battery, the small screw in order to put out or change this Optiarc device, if damaged.
Help me please!!!!

Hi,
The easiest solution may be to run Windows System Restore. If you have Norton Internet Security installed, you will need to disable Nortons Tamper Protection as shown in Step 2, on the link below.
http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20091112171719EN&ln=en_US
Once you've done this, shut down the PC. Windows System Restore is usaully best run in Safe Mode. Tap away at f8 as you start the PC to enter Windows Recovery Console. Use the arrow keys to select Safe Mode and hit enter. When this has loaded, from the Start Menu, click All Programs, click Accessories, click System Tools and launch System Restore. Pick a restore point before the problem occured and then proceed with the restore process. Windows will reboot as normal.
If this doesn't work or you do not have a restore point earlier than the problem, try the automated fixit from Microsoft on the links below.
Windows 7
Check if the drive is now working.
If the drive is not working, from the Start Menu, open the Control Panel and click on Device Manager. Click to open the IDE ATA/ATAPI Controllers. Right click on the first channel and select uninstall. Do not delete drivers if asked. When uninstalled repeat the process for each channel. Also if an ATA controller is listed, right click and uninstall this, again not deleting drivers if asked. Then open DVD/CD-ROM Drives. Right click the drive and select uninstall. Do not delete drivers if asked.
Reboot the PC and let Windows reinstall the devices. Check the drive again.
If it still isn't working, run the automated fixit from Microsoft on the link below again.
Windows 7
Next, from the Start Menu, open the Control Panel and click on Device Manager. Next click to open DVD/CD-ROM Drives. Right click the drive and select uninstall. Do not delete drivers if asked. When the device has uninstalled click on the 'Scan for Hardware Changes' icon ( usually just below Help on the toolbar ). Let windows reinstall the drive and see if it now works.
Hope this helps.
Best wishes,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

My computer/Ovi Suite can't recognize my nokia 523...

Hi, I just got my new nokia 5230 and I am trying to connect it to my computer with a nokia CA-101 cable but the computer can't recognize it, keeps telling me that my phone is a unknown device and 'one of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it'.
I already downloaded Ovi suite and it's the same problem there:
'Nokia Ovi Suite could not recognize your device. Try disconnecting and re-connecting the USB cable.'
Well I've done that again and again, and I selected the 'PC Suite' USB mode on my phone but it's always the same story...
What to do???

The device (phone) side only support "PC Suite" mode, there is no "Ovi Suite" mode.
The phone can connect as Massive Storage or PC Suite mode without any problem. But Ovi Suite does not detect the phone at all.
Ovi Suite version is 2.2.1.23
Phone Software version is 12.2.082
Why?

Anyone else seeing this - iDVD 08 *sometimes* can't recognize a superdrive

Anyone else seeing this - iDVD 08 sometimes can't recognize a superdrive in my 1-month old iMac
The error is "Your Macintosh does not have a supported SuperDrive. Please note that while you will be able to work with iDVD projects, you will not be able to burn a DVD disc."
Funny - it never said ths with iDVD 06
I'm seeing this about 20% of the time when opening iDVD.
Hardware Overview:
Model Name: iMac
Model Identifier: iMac5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 4 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: IM51.0090.B08
SMC Version: 1.8f2
PIONEER DVD-RW DVR-K06:
Firmware Revision: Q609
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2000 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW, +R DL
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
iDVD:
Version: 7.0
Last Modified: 8/10/07 6:44 PM
Kind: Universal
Get Info String: iDVD 7, Copyright 2001-2007 Apple Inc.
Location: /Applications/iDVD.app

Hardware Overview:
Model Name: iMac
Model Identifier: iMac5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 4 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: IM51.0090.B08
SMC Version: 1.8f2
Serial Number: W87239PKVUX
PIONEER DVD-RW DVR-K06:
Firmware Revision: Q609
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2000 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW, +R DL
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
iDVD:
Version: 7.0
Last Modified: 8/10/07 6:44 PM
Kind: Universal
Get Info String: iDVD 7, Copyright 2001-2007 Apple Inc.
Location: /Applications/iDVD.app

Ibook g4 can't recognize wifi card but recognize bluetooth

Hi,there:
G4 can't recognize wifi card , but can recognize the bluetooth, last night I take apart of machine, and found that the 2 are into 1 chip, but now I forget which model is it?maybe 1127.
When I take the card out and put back again, start machine , mac will recognize it and after a few minutes, the card disappeared.
Does this showes the wifi-bluetooth card is faulty? or sth else?
All the best!

do the PMU & PRAM reset first. still having issues, then try pulling the card & all the cables & put it back in.
do the PMU & PRAM again once back together.

E65 can't recognize HS-31 headset

Similar Messages

Maybe you are looking for