E65 could not start after installed new firmware

Hi,
Yesterday I conected to PC suite and updated firmware from 2.0.... to 3.0... > Everything went through smoothly. After I restored all information from back up files of PC suite, then I could not use my phone any more. Everytime I try to restart my phone, the message " Phone start-up failed. Contact to retailer "
Could any one help me to make my phone back to work, please ? Thanks a lotttttt

See this.
/discussions/board/message?board.id=communicators&​thread.id=31577

Similar Messages

  • My new iPhone4S could not start after the Apple mark disappear, the running screen stand still over 30mn. Can someone tell me how to solve this problem.

    My new iPhone4S could not start after the Apple mark disappear, the running screen stand still over 30mn. Can someone tell me how to solve this problem.
    I tried to connect to iTune hoped to restore the system but iTunes did not reconige it.

    here is link to the apple product feedback website:
    http://www.apple.com/feedback/

  • Windows could not start after SP-3 update

    Windows could not start after SP-3 update
    After I updated Apple Software Update to 2.1 and then updated to BC 2.1 successfully I D/L & Installed SP-3. Even got the Wizard & seemed to go OK. Got prompt “Installation Complete, Need to restart.” I did. I got a black screen with text:
    Windows could not start because the following file is missing or corrupt:\Windows\inf\biosinfo.inf
    You can attempt to repair the file by starting Windows setup using the original setup CD-ROM. Select ‘r’ at the 1st screen to repair.
    I used the power button to shut down Windows & then booted into Mac OS X normally.
    I think I need to restart my Mac into Windows (using the Option key ) WHILE THE WINDOWS XP installation CD is in the optical Drive. Then maybe I’ll get a choice to select ‘r’ to repair at the 1st screen?
    Has anyone done this with a similar error & successfully repaired their Windows installation? I don’t know if this is a Boot Camp problem or not. XP SP 2 had been working just fine.
    Thanks for any help.

    Solved! It apparently was NOT a Boot Camp Issue. The fix was to obtain the file “biosinfo.inf” and from the Mac side, go into my WIndows XP HDD & add that file to: Windows/INF folder. (Yes, it was missing). Why my XP SP2 installation worked fine w/o this file is beyond my knowledge. Perhaps this file is needed only when doing a type of major update yet not needed for simply starting & running Windows? There are web pages stating that upgrading to SP 3 can cause this problem if using 3rd party software such as Norton Anti-Virus (I don’t have that but DO have Zone Alarm). There are also various complicated, long fixes out there. For me, replacing that file did the trick & everything seems fine now. (As far as where one “obtains” that file--long story)
    Message was edited by: growler62000

  • HT4623 my phone main button not working after installed new version software 7.0.6

    my phone main button not working after installed new version software 7.0.6

    Arrange some liquid like petrol spirit and w 40
    two drops in to home button.
    30 times press slowly slowly and then restart your apply iphone.
    You will get ready.
    I am sure. Thanking you...

  • DistributedCacheService not starting after installing CU5

    Hello!
    I installed AppFabric CU5 (http://support.microsoft.com/kb/2932678) on a VM running SharePoint 2013 (Windows 2012).
    After installing (and updating the config file), the AppFabricCachingService no longer starts. The event viewer has the following:
    Event ID: 1026
    Application: DistributedCacheService.exe
    Framework Version: v4.0.30319
    Description: The process was terminated due to an unhandled exception.
    Exception Info: System.TypeInitializationException
    Stack:
       at Microsoft.ApplicationServer.Caching.VelocityWindowsService.StartServiceCallback(System.Object)
       at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
       at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
       at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
       at System.Threading.ThreadPoolWorkQueue.Dispatch()
    Event ID: 1000
    Faulting application name: DistributedCacheService.exe, version: 1.0.4632.0, time stamp: 0x4eafeccf
    Faulting module name: KERNELBASE.dll, version: 6.2.9200.16384, time stamp: 0x5010ab2d
    Exception code: 0xe0434352
    Fault offset: 0x00000000000189cc
    Faulting process id: 0xa0
    Faulting application start time: 0x01cff81d1301034e
    Faulting application path: c:\Program Files\AppFabric 1.1 for Windows Server\DistributedCacheService.exe
    Faulting module path: C:\Windows\system32\KERNELBASE.dll
    Report Id: 50d61782-6410-11e4-93fe-00155d73c008
    Faulting package full name:
    Faulting package-relative application ID:
    I removed and added  the host into the cluster, but it still did not start. I even updated the HOST file to have the fully qualified name.
    Any assistance is greatly appreciated.
    Thanks,
    Greg

    Hi,
    According to your post, my understanding is that after installing the AppFabric CU5, the AppFabricCachingService could not start.
    After installing the update you should do the following in all the servers that are holding the distributed cachec.
    After applying the CU, AppFabric uses a nonblocking garbage collection (background server garbage collection).
    Nonblocking garbage collection is a new feature in the .NET Framework 4.5.
    To apply this fix, follow these steps.
    1. Upgrade the servers to the .NET Framework 4.5.
    2. Install the cumulative update package.
    3. Enable the fix by using the following setting <appSettings><add key="backgroundGC" value="true"/></appSettings> in the DistributedCacheService.exe.config file between
           </configSections>
       <appSettings><add key="backgroundGC" value="true"/></appSettings>
       <dataCacheConfig>
    4. Restart the AppFabric Caching service for the update to take effect.
    Note :By default, the DistributedCacheService.exe.config file is located under the following directory:
    %ProgramFiles%\AppFabric 1.1 for Windows Server 
    For more information:
    http://blogs.msdn.com/b/calvarro/archive/2014/03/20/points-to-consider-with-distributed-cache-on-sharepoint-2013.aspx
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • Game does not start after installing on mac pro

    Game does not start after new install on mac pro ?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • CRS could not start after reboot

    I installed oracle 10g R2 RAC on RHEL4 U4 with 2 nodes. It runs fine on 2 nodes (without reboot after installation). But when I rebooted one node, I found that the CRS daemon could not start automatically. The boot menu show "Starting CRS" [OK]. The "init.crs start" command won't init the CRS daemon.
    $ ./crs_stat
    CRS-0184: Cannot communicate with the CRS daemon.
    SQL> conn / as sysdba
    Connected to an idle instance.
    SQL> startup
    ORA-01078: failure in processing system parameters
    ORA-01565: error in identifying file '+DATA1/RAC/spfileRAC.ora'
    ORA-17503: ksfdopn:2 Failed to open file +DATA1/RAC/spfileRAC.ora
    ORA-15077: could not locate ASM instance serving a required diskgroup
    ORA-29701: unable to connect to Cluster Manager
    $ /etc/init.d/init.crs start
    Startup will be queued to init within 90 seconds.
    $ cat /etc/inittab
    id:5:initdefault:
    # Run xdm in runlevel 5
    x:5:respawn:/etc/X11/prefdm -nodaemon
    h1:35:respawn:/etc/init.d/init.evmd run >/dev/null 2>&1 </dev/null
    h2:35:respawn:/etc/init.d/init.cssd fatal >/dev/null 2>&1 </dev/null
    h3:35:respawn:/etc/init.d/init.crsd run >/dev/null 2>&1 </dev/null
    $ ls /etc/rc5.d
    K01tog-pegasus K35smb K85mdmpd S05openibd S18rpcidmapd S55sshd S96readahead
    K02NetworkManager K35vncserver K87auditd S06cpuspeed S19rpcgssd S56rawdevices S97messagebus
    K05saslauthd K35winbind K87ipmi S08arptables_jf S19vmware-tools S56xinetd S97rhnsd
    K10dc_server K40smartd K89netplugd S08iptables S25netfs S58ntpd S98cups-config-daemon
    K10psacct K50ibmasm K90bluetooth S09isdn S26apmd S80sendmail S98haldaemon
    K12dc_client K50netdump K94diskdump S10network S26lm_sensors S85gpm S99local
    K15httpd K50snmpd K96pcmcia S12syslog S27vasd S90crond
    K20nfs K50snmptrapd S00microcode_ctl S13irqbalance S28autofs S90xfs
    K24irda K50tux S01sysstat S13portmap S29oracleasm S95anacron
    K25squid K73ypbind S04readahead_early S14nfslock S44acpid S95atd
    K30spamassassin K74nscd S05kudzu S15mdmonitor S55cups S96init.crs
    Do I miss any configuration to initialize the CRSD at boot?
    thanks, ezlee

    did you run cluster verification utility for node connectivity?
    http://docs.oracle.com/cd/E11882_01/rac.112/e16794/cvu.htm#autoId19
    also check the logs ad $GRID_HOME/log/<hostname>/...
    starting with alert.log, then the ones its referencing

  • Windows could not start DBConsole for new database instance

    Hi,
    I am getting this error "Windows could not start the OracleDBConsoleOracleInstance2 on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the system vendor, and refer to service-specific error code 1".
    I installed Oracle 11g on Windows 7 and created my 1st database instance (oracleInstance1) successfully with a listener and service configured. I could access this database using DBconsole URL: https://hostname:1158/em.
    I see the services started for:
    OracleDBConsoleOracleInstance1
    OracleOraDb11g_home1TNSListener
    OracleServiceOracleInstance1
    Next, I created a second database instance (oracleInstance2) and have configured a new service for this database. I am using the same listener as I intend to use one database instance at any point of time.
    However, I got this warning message during configuration:
    "Enterprise manager configuration succeeded with the following warning - Error starting Database Control. Please execute the following command(s).
    1. Set the environment variable ORACLE_UNQNAME to Database unique name.
    2. C:\Oracle\product\11.2.0\dbhome_1\bin\emctl.bat start dbconsole"
    To start the new database console, I stopped the previously running DBConsole, OracleDBConsoleOracle1 and started the new DBConsole OracleDBConsoleOracle2 and get the above error.
    When I try to start dbconsole manually using "emctl dbconsole start", it starts OracleDBConsoleOracle1 instead.
    I changed environment variables ORACLE_SID=oracle2 and ORACLE_UNQNAME=oracle2
    What am I missing here. Please help!
    Thank you.

    968952 wrote:
    Hi,
    I am getting this error "Windows could not start the OracleDBConsoleOracleInstance2 on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the system vendor, and refer to service-specific error code 1".
    I installed Oracle 11g on Windows 7 and created my 1st database instance (oracleInstance1) successfully with a listener and service configured. I could access this database using DBconsole URL: https://hostname:1158/em.
    I see the services started for:
    OracleDBConsoleOracleInstance1
    OracleOraDb11g_home1TNSListener
    OracleServiceOracleInstance1
    Next, I created a second database instance (oracleInstance2) and have configured a new service for this database. I am using the same listener as I intend to use one database instance at any point of time.
    However, I got this warning message during configuration:
    "Enterprise manager configuration succeeded with the following warning - Error starting Database Control. Please execute the following command(s).
    1. Set the environment variable ORACLE_UNQNAME to Database unique name.
    2. C:\Oracle\product\11.2.0\dbhome_1\bin\emctl.bat start dbconsole"
    To start the new database console, I stopped the previously running DBConsole, OracleDBConsoleOracle1
    Why?
    and started the new DBConsole OracleDBConsoleOracle2 and get the above error.
    When I try to start dbconsole manually using "emctl dbconsole start", it starts OracleDBConsoleOracle1 instead.
    I changed environment variables ORACLE_SID=oracle2 and ORACLE_UNQNAME=oracle2
    What am I missing here. Please help!First thing you are missing is showing us what you did. Instead you just described it, and that leaves a lot of room for questions. Copy and paste from a command prompt can work wonders here.
    From a command prompt, enter the following:
    set ORACLE_SID=oracle2
    set ORACLE_UNQNAME=oracle2
    set | sort
    net start
    emctl start dbconsolecopy the entire session, commands and full responses, and paste back here.
    >
    Thank you.Just to take a side road ...
    "I am using the same listener as I intend to use one database instance at any point of time. "
    Doesn't' matter if you use one instance or 100. The listener was DESIGNED to service multiple instances of multiple versions running from multiple homes. It is nothing but a connection broker. A telephone switchboard, if you will. All you need is a single listener, with the default name of LISTENER, running on the default port of 1521. It will handle all the database instances you care to throw at it. More instances than anyone in their right mind would ever put on a single server. Your server will run out of capacity to host additional instances before the listener runs out of capacity to service them. Especially since your 'server' is really just a toy in the Oracle world.

  • Windows 8.1 is not starting after installing Bluetooth driver

    I cannot start Windows 8.1 Pro (64Bit) after enabling Virtualization ( because I need HYPER-V ) from BIOS settings.
    It was perfect before installing RaLink Bluetooth Driver update.
    I use "HP ENVY 15 Touchsmart j001tx" laptop.
    Please have a look on this articles also:
    http://answers.microsoft.com/en-us/windows/forum/windows8_1-performance/windows-81-is-not-starting-after-enable/5aee0db6-7cdd-46b7-b85f-f048d9cf5d7e
    http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/bluetooth-driver-for-hp-probook-4740s-crashing/633a2200-ecdf-45bb-b643-075650ea3a16
    Further information:
    HYPER-V and Bluetooth individually works fine. But laptop is not starting up when both are installed. Please help me.
    Sushovan Mukherjee

    Hi:
    If your model uses a Ralink wireless card, see if installing this bluetooth driver works.
    http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_135494_1

  • Wifi connection with 4s not working after installing new software ios6

    wifi connection with 4s not working after installing ios 6.

    Go to Settings > WiFi > Select your network and hit the right arrow to "Forget Network"
    Then go to Settings > General > Reset Network Settings  and try connecting again when the phone restarts.

  • CLI156 Could not Start the domain - new session

    Hi,
    I'm trying to start my doamin but get the following message:
    Starting Domain domain1, please wait.
    Log redirected to C:\Sun\AppServer\domains\domain1\logs\server.log.
    Could not create temporary files - check C:\DOCUME~1\&#915;&#8734;&#8805;&#960;\LOCALS~1\Temp\ to see
    if its writeable and not-full
    CLI156 Could not start the domain domain1.
    I guess the problem is with the library name in hebrew. But I don't know where can I change the path for the temporary files.
    Can anyone help?
    Thanks,
    Gilad

    Specify TempDir directive in your server's instance_dir/config/init.conf file.
    Syntax is:
    TempDir path
    Or change environment's TEMP variable. Application server uses this variable for temp files writing by default.

  • IPod service manager will not start after installing iTunes 10

    iPod service manger will not start after loading iTunes 10. iPhone will not connect. I've removed reinstalled, wiped the registry reinstalled and deauthorized, removed and reinstalled from several different downloads. I have full permissions fo rservices and am administrator.. We now have three other units in teh office with the same issue.
    now what do I do?

    Don't know about fixing PitStop. However, have you tried a simple repair on Acrobat. If Acrobat won't open you can do that from the Programs and Features menu (Add/Remove Programs in OS prior to Win7).

  • CSA : Cluster not started after installing CSA 6.0.0.209

    After installing CSA 6.0.0.209 on Win2003 Server,
    the cluster service is not started.
    The server said that the network connection service is not started.
    The CSA is registered in the Management Center.
    And the group is in LEARN MODE.
    What is the source of this problem?

    First off, do you get any events from that machine in the csamc ? If not, does it solve the problem if you disable csa and try to start the cluster service ? If so, then you could have a deny rule that has no log (even though that is highly unlikely if you are using the default policies) Also what clustering software are you using, microsoft or some other 3rd party sw ?
    Jan

  • Oracle web tier install+config: opmn does not start after install

    Centos 5 box.
    After a silent install of web tier 11.1.1.2 opmn will not start. The installation was "complete" but I found some errors in the various log files.
    When I try to start a process (for example) using opmn this error occurs in the log file:
    [2011-03-31T16:31:49][opmn][TRACE:1][][OPMN]Failed to open wallet (file:/apps/oracle/orahttpserver/as_1/instances/instance2/config/OPMN/opmn/wallet) [default password] (28759)
    Command line says unexpected error, code 512 or something to that effect. The given wallet directory is empty.
    Checking back through the install & configure logs:
    java.lang.NoClassDefFoundError: oracle/security/crypto/core/PublicKey
            at oracle.as.config.utl.FileUtil.createSelfSignedOracleWallet(FileUtil.java:697)
            at oracle.as.config.utl.FileUtil.generateWallet(FileUtil.java:631)
            at oracle.as.config.utl.FileUtil.generateWallet(FileUtil.java:667)
            at oracle.as.config.utl.FileUtil.generateWallet(FileUtil.java:558)
            at oracle.as.config.impl.OpmnProvisioner.generateWallet(OpmnProvisioner.java:70)
            at oracle.as.config.impl.OpmnProvisioner.createOpmnConfiguration(OpmnProvisioner.java:366)
            at oracle.as.config.impl.OracleASInstanceImpl.createOpmnConfiguration(OracleASInstanceImpl.java:586)
            at oracle.as.config.impl.OracleASInstanceImpl.create(OracleASInstanceImpl.java:107)
            at oracle.as.install.webtiercd.webtierconfig.util.CreateASInstance.createASInstanceWrapper(CreateASInstance.java:137)
            at oracle.as.install.webtiercd.webtierconfig.util.CreateASInstance.createStandaloneASInstance(CreateASInstance.java:83)
            at oracle.as.install.webtiercd.webtierconfig.actions.WebtierConfigurationAction.configureInstanceStandalone(WebtierConfigurationAction.java:590)
            at oracle.as.install.webtiercd.webtierconfig.actions.WebtierConfigurationAction.configureStandalone(WebtierConfigurationAction.java:441)
            at oracle.as.install.webtiercd.webtierconfig.actions.WebtierConfigurationAction.doExecute(WebtierConfigurationAction.java:174)
            at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
            at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
            at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
            at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
            at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
            at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
            at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
            at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
            at java.lang.Thread.run(Thread.java:619)
    Caused by: java.lang.ClassNotFoundException: oracle.security.crypto.core.PublicKey
            at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionClassLoader.loadClass(StandardConfigActionClassLoader.java:75)
            at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
            at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
            ... 22 more
    The configuration of  completed successfully.
    Checking a screen shot of someone else's configure output theirs continues beyond
    "Bootstrapping OPMN configuration files..."
    and correctly generates the instance etc.
    I have tried a reinstall, and also tried a generate a new instance using the silent config tool. Same errors each time.
    Log also states;
    Oracle Instance Home
                            Instance Home Size: 0 MB (or 40mb)
                            Available: 0 MB
    . This varies between installs and configs but available is always 0. There is Gb's of space available in the directory and the user has write permissions.
    Can anyone tell me why it is failing to correctly generate the wallet?                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    Solved. Oracle_home and Instance home must be subdirectories of MIDDLEWARE_HOME. MIDDLEWARE HOME and command to not install updates must be added to response file. Helpful to install and configure separately.

  • Apache does not start after installing the policy web agent

    Hi,
    We get the following error when we start the apache webserver on linux which has opensso policy agent installed/configured to it.
    ./apachectl start./apachectl: line 77: 4453 Segmentation fault $HTTPD -k $ARGV
    Environment:
    OS: Linux SystemName 2.6.9-42.ELsmp #1 SMP Wed Jul 12 23:27:17 EDT 2006 i686 i686 i386 GNU/Linux (32 bit)
    WebServer: httpd-2.0.50-i686-pc-linux-gnu.tar.gz
    Policy Web Agent: Apache_2.0.54_agent_2.2_RHAS3.0.tar.gz
    Could not find the issue/solution for this problem on internet... Please suggest if anyone has some solution to this.
    Regards
    Manoj

    Hi,
    Once I had an iAS 1.0.2.2 running without problems. However after installing Patch 7 for Forms (released 27 august 2001) I get exactly the same error messages as Pieter. I have tried starting apache as administrator, comment out mod_ose, set wv_gateway_cfg, but none seem to work. Please help.
    Environment:
    iAS 1.0.2.2 on Windows NT
    Oracle 817 on AIX
    null

Maybe you are looking for