E65 delay taking photo with camera - Can other use...

Can any other E65 users please confirm if the following camera behaviour is normal:-
When I take a photo I hear the shutter sound and see a frozen picture on the screen.
However, this frozen picture is not the one that is stored. The camera actually seems to take another freeze, (no accompanying sound), about a second later. This second shot, which is the one that is saved to memory, is invariably blured or incorrectly framed as the camera has moved away from pointing at the subject.
Anybody see this bug too?
Mike

All firmware is original I only got it last week, the only update I have made to it is installing the latest version of the Nokia pc suite (Nokia_PC_Suite_683_rel_14_1_eng_web) if you don’t already have this version and install it you may run in to a driver connectivity problem.
This happened to me, if it does happen it’s because there is old driver software conflicting with new software. to solve uninstall Nokia pc suite then go to start, control panel, add remove hardware and get rid of "Nokia connectivity cable driver" and "PC connectivity solution" then re-install the latest pc suite.
Other than that I don’t really know what firmware version I have on there at the moment, how can I check it?

Similar Messages

  • My iphone 3g is getting really slow. I done full restore ,deleted most apps . Not many photos in my album. i have no videos on my iphone. When taking photo with my iphone it takes ages for camera to open up. Very slow to take photo. Any suggestions? Help!

    My iphone 3g is getting really slow. I done full restore ,deleted most apps . Not many photos in my album. i have no videos on my iphone. When taking photo with my iphone it takes ages for camera to open up. Very slow to take photo. Any suggestions? Please help !!!!

    Thank you very much for your reply gdgmacguy :) I did all you suggested apart from restore as new device . Didn't know I could do that . After restore I did restore from back up only,  as I didn't want to end up without contacts details on my phone. If I restore as new device how do I get my all contacts? Still will have to use back up? Sorry if it sounds like I don't know what i am doing, i just have no one to ask who would know. Thank you

  • I have a problem. I take photos with camera of my iPod touch 5 with the effects that comes in the iPod and now when I look to my photos I see that the effects go out and the photos looks like I didn´t put the effects. What is that? How can I solve it?

    I have a problem. I take photos with camera of my iPod touch 5 with the effects that comes in the iPod and now when I look to my photos I see that the effects go out and the photos looks like I didn´t put the effects. What is that? How can I solve it?

    Try:
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             

  • Taking photos with my iPhone5c color shifts from photo to square

    When taking photos with my iphone 5c ios7 I notice the color shifts from photo to square. The color changes are noticible. I have auto focus on, flash off, on both formats I click on the image to get exposure and focus and take the photo.

    Hi Rick,
    Thanks for visiting Apple Support Communities.
    If the colors look different when you take pictures in "photo" and "square" mode, make sure that there are no filters being used:
    Apply a filter:  (iPhone 4s or later) Tap the filter icon to apply different color effects, such as black & white. To turn off a filter, tap , then tap None. You can also apply a filter later, when you edit the photo. See Edit photos and trim videos.
    If you are seeing unexpected results when taking pictures with your iPhone 5c, these troubleshooting steps can help:
    Camera isn't functioning or has undesired image quality
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try to remain steady while focusing:
    Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
    Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
    Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
    Note: Video-recording features are not available on original iPhone or iPhone 3G.
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    You can find the article with these steps here:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    All the best,
    Jeremy

  • Problem opening photos with camera raw 7.1 with Photoshop CS6

    I am using Windows 7 32 bit system with 4GB ram and graphics accelerator.
    I have Photoshop CS5.1 installed in the same system at it works perfectly.
    What happens is when I use the B+W function, I get an error message saying that I have not enough ram.
    After that, when I open the next photo with Camera Raw, the raw image will not open.
    I have already maximised the Ram that Photoshop can use to 1.7GB and there is more than enough space in my scratch disk.
    Anyone can tell me what the problem is?

    Hi Noel,
    Thanks for your reply.
    Just to clarify.
    I applied B+W layer adjustment on my photos.  It is part of an automated set of actions which I apply to all my photos.  I adjust the B&W layer to 50% overlay.  When I click on the B&W adjustment layer, there is an error message that tells me I have not enough ram. Once that happens, when I open the next photo in raw, I don't see the new photo but only the frame of the camera raw though which I see my photoshop desktop.  
    It doesn't occur with the first few photos.  But by the 3rd or 4th it happens.
    I will adjust it to 50% and see what happens.
    Leslie

  • I have been taking photos with my Ipad for several months and sending them via email and Facebook.  Now it will transfer photos to FB but not email addresses.   What could be the problem?          email an

    Have been taking photos with my Ipad and sending them to email address and FB.  For some reason it will now send photos to FB but not my email address.  What could be the problem?

    Does your email provider have a limit on the total file size allowed on their server? It could be that emails with photos send in the past are still on your email server. They might even be in the servers trash folder. If the total MB of those emails exceeds the amount allowed then no additional emails can be received. Try using a web mail page to check and edit what's on the email server.

  • I want to use a video projector with powerpoint can I use my mac to drive it- and what about sound?

    I want to use a video projector with powerpoint can I use my mac to drive it- and what about sound?

    Hi Scott,
    You should be able to. If the projector has a speaker with acceptable sound, that's one option, otherwise powered speakers or a surround system.
    What connections does the projector have?
    Exactly which MBP do you have?

  • What type of headset with microphone can be used for softphone on ipad?

    what type of headset with microphone can be used for softphone on ipad? ideally wireless, if not a simple one not too bulky

    I use the same bluetooth headset that I use with my iphone, Jabra.
    and in using skype or other voip apps, it works just like my iphone does.

  • What kind of camera can I use??????

    I need to measure crack length in fatigue test of an Aluminium sample automatically. For example, the camera can take shots (Images) every 4000 cycles (fatigue load cycles), maybe more cycles.
    For my test, I need to measure both sides crack length (right side and left side of specimen centre line), shown in Fig1.  So I need to take shots both crack tips at the same time, which means camera must have a large field view and the resolution should measure 0.01mm, to see both crack tips clearly. At the end, I must be able to acquire images from Labview. I can save all the images into my fold from Labview, then I can measure crack lengths in left and right side from every image.  Fig1. sample size and crack tip
    Would you please give me any suggestions on the characteristic/specifications of this kind of camera?
     What kind of camera can I use? How much this kind of camera? Where can I order this kind of camera?
    Attachments:
    camera-Fig13.jpg ‏16 KB

    Hi Cran.
    You might want to put this topic into the Hardware Forum instead.
    It seems that this isn't much of a LabView question......
    Regards BCL
    Don't forget to rate a good Answer....
    Here should be some cool signature
    But there's NOT
    LV7Express, LV8.5.1

  • If I buy the iPad 2 with 3g, can I use it on a wireless network without using the 3g?

    If I buy the iPad 2 with 3g, can I use it on a wireless network without using the 3g?

    I leave both 3G and Wireless permanently enabled. I find that whenever I am within range of one of my chosen Wireless networks it automatically uses Wi-Fi rather than 3G. When I am not my Ipad2 uses 3G.
    So in essence Wi-Fi takes priority over 3G.

  • When u buy Philips DC291 Docking Clock Radio with Remote can u use a ipad 4 on it

    When u buy Philips DC291 Docking Clock Radio with Remote can u use a ipad 4 on it

    No, it has the wrong connecting pin. It was designed for  iPad 1.

  • I have a att iphone 4s and i have service with sprint can i use it on sprint?

    I have a att iphone 4s and i have service with sprint can i use it on sprint?

    Thank you guys so I figured out how to use it I have a cheap android phone on sprint I use google voice on my phone 4s and I can make calls and text messages also use FaceTime and iMessage. So I'll just trade it or sell it and buy a sprint one until then ill use google voice 

  • What Laser Photo paper 4X6 can I use in a color Laserjet Pro M276

    What Laser Photo paper 4X6 can I use in a color Laserjet Pro M276?
    This question was solved.
    View Solution.

    Hi,
    You have to go to the next page, first page only lists 12 items. Anyway, HP supplies larger size papers for Laser printers. I don't know the reason behind:
       http://store.hp.com/webapp/wcs/stores/servlet/CategoryListingView?catalogId=10051&categoryId=88331&l...
    I don't print photos at home, cost too much but for testing, I normally print 4 photos on one sheet (A4) and cut in 4.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Using SOA with OBIEE -- Can i use ECLIPSE or do i need JDeveloper?

    Hello - I want to use SOA with OBIEE -- Can i use eclipse or do i need JDeveloper?
    Any help is appreciated.
    Thanks,

    You can of course use either eclipse or Jdevelopper.
    What you need is to consume the web service file (WSDL). You can also use the package UTL_HTTP or any language you work with.
    For JDevelopper :
    http://oraclebizint.wordpress.com/2007/07/31/customizing-obi-ee-soap-api/
    For Eclipse :
    With Eclipse, you have to install WTP and then you can create the library.
    http://www.eclipse.org/webtools/
    Re: Problems calling the OBIEE webservices
    See at the end of the post.
    What is your favourite ide ?

  • My iPhone 5 camera gives a blurred image when taking photos with the device, how can i fix that

    i have had my iPhone 5 for almost a year now and have been suffering from this problem for quiet a while now, when taking pictures with my iPhone 5 the result is a blurred image, i dont know why the focus of the image is so bad !

    MAke sure teh problem is not do to camera shake by holding it firmly on a solid surface and taking a picture of something in the 10-20 foot range.  If that rules out shake, and the image is blurred, take the iPhone to an Apple store genius bar and have it examined.  Backup all of your content in iCloud in case the verdict is a replaement iPhone, they can resore your content from an iCloud backup.

Maybe you are looking for

  • Multiple Finance EBS as source system ETL to one OBIA finance Analytics

    Hello every one! My scenario is I have 3 geographical locations all running Oracle EBS finance but may be with different release (R11 and R12). Consider: Company A - EBS finance R11 Company B - EBS finance R12 Company C - EBS finance R11 all these co

  • Viewing pictures on .mac accounts

    Is it possible to view name/password protected .mac webgalleries through an Apple TV? If yes, some guidance would be appreciated. When one publishes a web gallery out of Aperture, there is an option to allow everyone to see it or to restrict it with

  • Regarding postings

    hello sap guys,   i am bit confused regarding the posting to the accounts. Suppose i have one semifinished material and rawmaterial.Now when i do the goods issue of raw material for semi finished material than these much amount of rawmaterial cost wi

  • S-domain transfer function

    I am trying to recreate my partners Matlab filter in Labview whereby a sine wave goes through a low pass filter. I am using a sinewave array as the input and am trying to impose the s-domain low-pass transfer function s/(1+sT) on the wave as is done

  • Installing NW Gateway 2.0 addon on fresh NW 740

    Hello, After installing a new NW 740, I follow up the steps in this how to doc: Installing and Configuring SAP NetWeaver Gateway 2.0 Non of the add on run successfully, for example, when I run the saint for GW_CORE i get The Add-On GW_CORE rel.200 is