E65 - Does not recognise a few of my contacts

I recieve a text message from a friend, save the details straight from the txt to contacts and whenever that person contacts me in the future (either via txt or voice call) the contact name does not come up. I know the number is entered in the phone correctly as I use the details to dial out? Why does the phone not recognise the contact when it's correctly entered into the phone?
I have even tried re-entering the phone number from the start, but it will not recognise?

hi will,
if you have a duplicated the number, either by using another name or even using the same name, it will not be "recognized", the number should only be put once in your contact, then it will show your contact's name...

Similar Messages

TS3988 i have updated my phone with the new software and it keeps saying that verification has failed on my icloud and that the certificate for service is invalid. following this now my phone does not recognise any of my iphone contacts and so i cannot f

i have updated my phone with the new 6 IOS. Since doing this my icloud account keeps saying that verification failed and the certificate for service is invalid. Folowin this problem my phone also does not recognise my other iphone contacts so i cannot facetime or send imessage

You don't need an app. You need couple's counseling. I believe what you want to do may also be illegal in many jurisdictions.

Itunes on windows 8.1 does not recognise my iphone/nano or ipad. I have reinstalled a few times and nothing has worked?

I have updated my laptop to windows 8.1. My laptop now does not recognise my iphone, nano or ipad? I have uninstaled and reinstalled. I can downlaod pictures off my iphone but not connect to itunes?
Please help

iOS: Device not recognized in iTunes for Windows

Lightroom 5.7.1, Yosemite OS X - Synchronise Folder function doesn't work in Lr. Is there a compatibility issue? I can see the folders/images in Finder but when trying to synchronise folders in Lr it does not recognise that there are any images and theref

Lightroom 5.7.1, Yosemite OS X - Synchronise Folder function doesn't work in Lr.
Is there a compatibility issue? I can see the folders/images in Finder but when trying to synchronise folders in Lr it does not recognise that there are any images and therefore unable to import to catalogue. Anyone has any idea how to make it work. Thanks a lot.

Hi Elba,
Thank you very much for your reply. Not sure, however, that we are talking about the same problem.
I am trying to perform the same function in Lr that I have been doing for many years in the past and has only been a problem in the last few days (possibly coinciding with upgrading to Yosemite, trying to find out whether that is the problem)
I am not intending to sync any files with Creative Cloud but only trying to use 'Synchronize Folder' function in Lr. Normally, I would right click on a particular folder in Lr catalogue and click on that function to check that the Lr Catalogue is perfectly matching my drives where the original photos are actually stored.
The problem that I only started to encounter is that I can see the files on the actual drives but they do not appear in my Lr Catalogue and they are completely invisible to Lr. I simply can not get Lr to recognise them and then import them to catalogue.
If for example, I export images to Ps and then save and close them, they do appear on my drive but are invisible to Lr and I can't get them imported into the catalogue. Import to folder also not producing any results as they are still invisible to Lr.
Completely baffled by it. Any idea what could be the reason?
Kind regards,
Nik

Itunes does not recognise CDs................please help

i've had my ipod for a few months now and it hasnt been a problem before as it has always imported CDs fine onto my ipod but recently whenever i insert a CD into the drive itunes does not recognise that i have put a CD in and it cant be the CDs that i put in as i have leant one of them to my friend and she said its worked fine on her itunes, when i insert the CD and go onto run CD diagnostics this comes up,
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
FUJITSU SIEMENS P5SD1-FM2
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: NVIDIA GeForce 6200SE TurboCache(TM)\GeForce 6200SE TurboCache(TM)
IDE\DiskST3160023AS____________________________3.00___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomHL-DT-STDVDRRW_GWA-4164B_______________1.03___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: HL-DT-ST DVDRRW GWA-4164B, Rev 1.03
Drive is empty.
The last failed audio CD burn had error code -128(0xffffff80). It happened on drive D: HL-DT-ST DVDRRW GWA-4164B on -128(0xffffff80) media at speed 0X.
i dont even understand what this means, please help!!!!!!!!!!!! thanx xxxx

Well the report just tells basics of your setup and errors going on in short. Error -128 means either you or iTUnes cancelled the burn before it even started.
Your issue tho is you have no lower filter. you should have 2, and upper filter and a lower filter. Now Im not that good with the filter thing just yet, but I think if you reinstall itunes it will install the lower filter you need.
You will want to remove itunes AND quicktime in the control panel>Add/remove. Dis able any antivirus/security programs so they do not interferr with iTUnes and then download and install the latest iTunes from www.apple.com

My i pad shows connect to itunes but my computer does not recognise the devise -- it was ok until i tried to do a software update

my i pad shows connect to itunes but my computer does not recognise the devise -- it was ok until i tried to do a software update

Try and force iPad into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.

Prem 8.0.1 does not recognise DV camera

Adobe Premier Elements 4.0 and 8.0.1
Windows XP SP3, AMD 5600+, 4G RAM, 1394 connection
NVidea GeForce GT 240 video card, latest driver updates
Sony TRV-240 Dig8 Camera
Sony camera is recognised by Windows My Computer, AVS Video Recorder and Windows Media Encoder with capture capability.
Premier only recognises camera as "Microsoft DV Camera and VCR" and does not capture.
How to get Premier to recognise camera and capture video?

Re: prem 8.0.1 does not recognise DV camera
created by A.T. Romano in Premiere Elements - View the full discussion
omni60
Premiere Elements 4 or 8.0/8.0.1 on Windows XP 32 bit.....Yes
Are you set up with a FireWire (iLINK) connection for this DV Data capture?
Yes, as indicated by the 1394 connection statement.
From the screenshot, it appears that you only have 77 GB free space at the save location for the DV data capture. Can you point the Captured Video and Captured Audio to another save location with more free hard drive space?
Have moved to 300GB free space. no success.
Is this a "it worked before but not now" or "it never worked before" for Premiere Elements 4 or 8.0/8.0.1?
worked a few years ago marginally probably on Prem Elem 4.0. Have rolled-back NVIDIA drivers to 296.10 dated 14 June 2012 with no success
As background if needed, please review the following Adobe document on Capture
http://help.adobe.com/fr_FR/premiereelements/using/WS5CDA0F91-60F1-4b7 9-ABF6-E9E75F498DB2.html#WS2AF26FB5-4C63-4c46-9DB3-7249558F6528
Although it targets newer versions, the principles should be applicable to Premiere Elements 4 and 8.0/8.0.1.
Have read, no fixes.
Please review and consider and then we can decide what next.
Have removed NVIDIA card and am using on-board DVI port. Prem 8.0 still reports "Microsoft Dv Camera" and not Sony as other programs do. What causes Prem Elem to not report Sony DV camcorder?
Thank you, will keep trying.

I am trying to install a brand new WD 500 gb sata internal hd in my macbook pro. the original install dvd does not recognise the hd. all hardware is ok. any help?

I am trying to install a brand new WD 500 gb sata internal hd in my macbook pro. the original install dvd does not recognise the hd. all hardware is ok. any help?

For some reason OS X disks (whatever edition or flavors) that are supplied with Apple products only seem to contain a limited knowledge of available hard drives on the market at the time of thier publishing. This (rather opportunistically) creates a "Best Before" stale-OS X-software-copy situation where upgrading to or replacing a defective internal SATA hard drive with a newer, better or larger one is a largely hit and miss affair.
If you buy the latest and greatest disk drive available for any older Mac you are likely to run into unresolvable problems making a clean re-install of your own, old edition or flavor of OS X onto any newer or larger hard drive since the OEM (gray) "OS X Install Disks" that Apple supply with retail products seem to contain only time-sensitive lists/mapings of then-known target drives that the Drive Management Tool in the then-published old "Installer Software" will support.
Presumably new (colorful "X") retail versions of OS X (10.whatever.whatever) also contain time-limited Installers with limited knowledge of and adaptability to/compatability with a limited number of old hard drives then kicking-around on the market.
This is especially a problem nowadays since the countless "puny old" hard drives that have been on the market are largely obsolete in a few months time, as manufacturers continue to produce larger and cheaper units, discontinuing older puny products... So if your drive fails you need an exact old (or similar familial) replacement drive for your "backup copy of OS X" to do a fresh, clean OS X re-install. Otherwise you need to purchase a new retail version of OS X, since yours is now effectively obsolete. Purchasing an old, puny drive to re-install your version.flavor of OS X to avoid buying a new version of OS X is a rather false economy.
If you still have a working old hard drive with your old polluted 10.version.flavor of OS X still working on it you apparently must clone it with Time Machine or the newest version of Disk Utility (disk image copying) to most newer, larger drives, and a clean reinstall to such new hard drives is not possible.

Facebook does not recognise iMovie file type

Hi all. I have successfully downloaded videos to Facebook this year, but have just upgraded to Lion from Snow Leopard and something appears to have changed.
When I try to "Share" onto Facebook, the Facebook interface does not recognise the movie type. I also notice that instead of each project showing in the "Movie Events" file as a thumbnail of the opening frame, it sits as an iMovie Icon, albeit with the project name.
I have successfully uploaded to Vimeo, so my question is: has something changed in iMovie after the upgrade to make the "project" indigestable to Facebook?

GR-Blitz,
You can see a few ways of doing it in this thread:
https://forums.adobe.com/message/6474423#6474423

After having updated the software on my apple tv, i cannot set up home sharing on it (let alone itunes!) simply, the apple tv does not recognise my apple id and password anymore

i have updated the apple tv software (on one apple tv, ihave 2) after having used for 2 years withou any problem.
i tried to log in again to watch movies already purchased but i cannot. the itunes store is not available and the home sharing does not recognise my id and password. on my pc i have alsoupdate to the latest software my itunes.
the second apple tv where i am still resisting tomupdate the software works very well as always.
help!?

Hi Everyone,
hope this message finds you all in time. The recent Apple TV update 5.1 is terrible. Apple knows it is which is why (thankfully for some relentless user -I have no idea who but I believe it was under threat) they have allowed to sign 5.0.2 again which means you can downgrade your Apple TV 2 and 3 to a 5.0.2 version via iTunes. Who knows how long they will keep the window open but I have downgraded my ATV early this morning. I couldn't post this earlier because I was out all day but I am doing it now.
Here's how to do it:
1) Connect your ATV to your computer via a Mini USB (not included with ATV but included with many other electronic devices) - in order for your ATV to appear in iTunes you must FIRST plug the USB cable to your computer and ATV and only THEN plug the power cable.
2) Download your ipsw restore file from Apple.
5.0.2 (ATV 2): AppleTV2,1_5.0.2_9B830_Restore.ipsw
5.0.2 (ATV 3): AppleTV3,1_5.0.2_9B830_Restore.ipsw
3) In iTunes select yout ATV, hold SHIFT and click on Restore
4) Find and choose the downloaded IPSW file in the Open Dialog Box and hit Next
5) As long as Apple still signs that version the Restore process will begin and will take a few minutes to complete.
Enjoy!
raadore

Itunes does not recognise my library

I have my itunes library on a NAS. This morning I have tried to open Itunes and it does not recognise the library - it is asking me either to create a new library or to choose another library. When I try to link it to my existing library, I cannot select the library as it is greyed out.
This very same thing happened a few weeks ago and at that point i decided to rebuild the library. I wondered if anyone knows if they have had a similar experience, or why it is happening?
thanks

I also am having this problem. It seems Apple has decided what's best for us, and your system will automatically switch the library location back to your hard drive on the MAC if it is unable to find the NAS library or if the NAS is turned off. This causes EXTREME frustration, because when you have TONS of music on your NAS, you then have to re-direct the library location back to the NAS manually, and it takes a LONG time for the MAC to reorganize the library. Plus if you inadvertantly loaded new music into your library after the location was moved back to your hard drive, you'll now have music in two different locations and consolitdating them is another huge time suck.

IPod Nano: Error Message "The USB device has malfunctioned and Windows does not recognise it"

Hi everyone, I just received 2 brand new iPod Nanos for my kids for Christmas, thought I'd be smart and sync them both now before wrapping them so I don't have to be messing around with them on the day. One synced without a problem, then using the same cable, same computer, same USB port, the 2nd one came up with "The USB device has malfunctioned and Windows does not recognise it" I've tried restarting my computer, unplugging and reinserting the USB. Is there anthing else I can try before returning it? Thanking you for any help.

I have solved my problem, I ended up ringing Apple and got an awesome lady who told me to reset it by pressing the sleep button and menu button together for about 10 seconds and once it actually turned on for the first time the computer then recognised it, so it's all good, :-) Thank you lovely lady!

I have a 16GB iPhone 3GS. Tried synching my phone through iTunes (11.0.1 I think... on a 2009 Macbook Pro). Now when I connect to iTunes, it says it does not recognise the content on my phone. Is this because my phone (and laptop) are too old?

I have a 16GB iPhone 3GS. Tried synching my phone through iTunes (11.0.1 I think... on a 2009 Macbook Pro). Now when I connect to iTunes, it says it does not recognise the content on my phone. Is this because my phone (and laptop) are too old?
Also, when I tried to Restore the settings, an Error Message pops up that says " The iPhone software update server could not be contacted. The requested resource was not found.
I'm trying to free up space on my phone by removing [literally] thousands of old photos which were originally synched to the phone, because I had forgotten to uncheck the photos button when I synched it ages ago.
I have also tried synching it on my 24" iMac (running OSX Snow Leopard). But again, when I try restoring the phone through itunes, it says the file is corrupted. It sggests unplugging the device, and then plugging it in again. I have done this numerous times with no success.
I'm guessing it must be because my phone (and versions of iTunes, and OSX) are all too old.
Please can anybody help.
Cheers,
Dan_nz.

There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

I changed from i iphone 5 back to a iphone 4.. now my itunes does not recognise that i have a iphone 4! how do i convert my last back up (on iphone 5) to my new iphone 4?

i changed from i iphone 5 back to a iphone 4.. now my itunes does not recognise that i have a iphone 4! how do i convert my last back up (on iphone 5) to my new iphone 4?

In your case you can only restore from a backup that has been created with the same iOS version. An iPhone 4 can only run 7.1.2, and, unless your iPhone 5 did not run the same version, you can't use a newer iOS backup of the 5 on the iPhone 4

Flash Player Does not work at few Web Sites

I was using Flash Player 10 somehow it suddenly forced me to install the latest Flash Player and I did it. Now it does not work at few web sites but works on other. The web sites where it does not work I am including the screenshots. when I want to watch video on these sites it says loading ad and it keeps on like never ending please advise below are the screenshots of the two web sites where it does not work
Satbahadur
My Device is HP Laptop and I have Windows xp

Hi Chris
I checked on my daughters MAC laptop too its not working on it too. I may
try getting adblocker then I will try again. Thanks for your quick
attention I appreciate your help
Satbahadur
Message was edited by: Satbahadur Chris Sorry to add some more info I tried one adblocker called simple blocker but now the video does not load I am confused don't know what is possible Please advise when ever you have time Thanks again

E65 - Does not recognise a few of my contacts

Similar Messages

Maybe you are looking for