E65 Firmware update yet ?

I am still stuck with the following :
1.0633.18.01
11-01-07
RM-208
Nokia E65
Frankly its getting a little too annoying that nokia hasent opted to get a firmware out yet. Any new speculations or updates to this firmware ?
Thanks.

Totally agree witth the above - come on Nokia.
There is a thread in the E Series board which suggests a major release in the next couple of weeks - but no concrete proof of this nor source of the info.Message Edited by john32 on 15-Aug-200702:58 PM
John32

Similar Messages

Nokia E65 firmware update due in October

Hi all,
we just received a message from the Eseries team. They informed us that "Nokia will release a firmware update for the E65 in October for most E65 variants."
There's been plenty of discussion here among E65 owners so I hope this helps. We do not have any information about any possible changes that this update will bring but I am sure many of the discussions about the E65 here at Support Discussions have been a valuable source of information to Nokia.
I wrote all my posts from 2005-2011 as an "Admin" for this community. I still work for Nokia as an external consultant, so my rank in all posts is now "Employee".

28-Sep-2007 08:24 AM
jacekza wrote:
..please ask them to release a public change log for the E65 firmware... and even all firmwares. And also please find out from them if they have any intention of releasing new firmware for the E70.
At the moment Nokia does not publish change logs nor schedules for any product-specific updates.
E65 was an exception since there seemed to be so much concern over whether it will be supported by NSU at all (as it's not yet listed at www.europe.nokia.com/softwareupdate).
I wrote all my posts from 2005-2011 as an "Admin" for this community. I still work for Nokia as an external consultant, so my rank in all posts is now "Employee".

Nokia E65 Firmware Updating Problems.

Hey guys I have a Nokia E65 (RM-208).
Whenever I try and run the Nokia Software Updater it is never able to find an update. Even though I know there are updates available.
When I press *#0000# it says 1.0633.03.00
28-09-06
RM-208
Nokia.
Does anyone know an alternative way to download and install this firmware on my phone? I really need to update the firmware because this phone is very buggy.
Thanks in advance.

Anyone???

E65 Firmware Updates ?

Here are my details:
1.0633.18.01
11-01-07
RM-208
Nokia E65
Bought this mobile on 16th April 2007 in the Middle East (UAE - Abu Dhabi)
Browsing through these forums i came up with the following updates:
Update 1:
1.0633.18.02
26-01-07
RM-208
Update 2:
1.633.58.02
I connected my phone to the NSU software but it still says no new firmware. Is there a site by nokia or anyone, where constant updates are added as to what model would has what new software version.
I believe that the customer care section of phone shops get their info from some nokia site. Downloading that software is copyrighted, but having access to version information is harmless. Why doesnt nokia give a page where all phones are updated with their latest software versions and the changelogs.
Thanks and regards.

Google :
http://www.google.com/search?hl=en&q=1.633.58.02&btnG=Google+Search
Link 1 :
/discussions/board/message?board.id=smartphones&message.id=30862&page=2
Link 2 :
/rss/message?board.id=smartphones&message.id=33810
Regards

E65 Firmware Update O2

I recently (about a month ago ;-)) had problems with my phone. After player DoomRPG on my phone and turning it off it said it had problems starting and that i Should contact the supplier. Upon taking it to the O2 store, and going on a rampage and saying that I lost money and couldn't make important calls and that they should give me a shiny, new N95, they said they will first have to send to an 02 service shop. When I got the phone back I got a note saying that there were problems in the firmware and that they had no upgraded the phone's firmware to an 'all new o2 approved' firmware. What are your thoughts?

hello dijay
type the *#0000# and check what version it is.
That way you know if it is still the previous.
Cheers

Any new firmware updates for Linksys E2500 yet?

I heard about this http://www.komando.com/news/241801/self-replicating-virus-infects-and-breeds-inside-linksys-routers and wondering if there are any firmware updates yet but I havent seen any unless one is being worked on?

If your router is infected, you can reload the same firmware and get rid of it (but of course make sure you disable or change the remote management port so it is not still vulnerable). The new firmware expected to come out will fix the vulnerability, but in the meantime, you can stop the attack by reloading...rebooting won't do it.

E65 & A2DP - firmware update?

I bought MD-5W bluetooth _stereo_ speakers to listen
to music streamed via bluetooth by my Nokia E65.
Unfortunately, the E65 does not support A2DP.
Nokia did it for other phones so I'm wondering
if there are any plans to add A2DP support in
the next (and first) firmware update for the E65?
Maybe they fix the occasionally "Insert SIM" crashes
too ...
Mono tin sound is painful!
Florian

Hello
I agree with all the users here. It seems like the E65 should have a new firmware upgrade, to fix all the new bugs with the wifi connection. In my opinion, Nokia need to add A2DP for a phone like this since many users use A2DP for bluetooth speakers to receive phone calls while driving, and also listening to music. Although this phone is a part of the E series, a bluetooth profile such as the A2DP need to be supported for business users who don't need it for multimedia reasons!
There are many users complaining about this lack of A2DP and WLAN instability. We encourage Nokia to release a new update for our phone and not to leave us behind - else all users will understand the E-series is a fiction and N-series are much more advanced and stable.
Please release a new update with A2DP for us, we are yearning for it so much!

E71 NAM firmware, why no update yet

Why does it take so long for Nokia to release the firmware updates for unlocked NAM phones?
There was a firmware release in March and it's still not available for my NAM product code.

oh Great Does it fix many of the things from Mavericks? And what if you have installed things in Mavericks like a thing that adds folder functions and stuf like that. And i have a Mac Pro 2.66 Gzh Quad Core IntelXeon. from 2009. 10GB
I heard that yosemete is not good for the older macs. I wonder if mine is considered old

Cisco Router tried to take a firmware update and no longer works

Ok so internet was working fine until Cisco Connect told me to take an update. My connection is wired and there were no disruptions during the download. Yet the download still failed and now my power light blinks continuously and there is no internet access. I tried instructions on "How to unbrick your Cisco Router", even got them to work, it took the firmware update from the cmd line. Still doesnt work though. What's wrong with this thing and how do i fix it?
Solved!
Go to Solution.

I ended up downloading a firmware utility program and was able to get it to reload. The power light became solid somewhere between 2-5 mins, however still didnt connect to the internet. Found that all this factory resetting will change your Internet access name & password, with no way to find out the new one. You have to remove the Cisco Connect program from your computer and reload it from the original disk. Only then will you be up and running again. While I appreciate the response Helm, I was way beyond a 30 second reset button solution when I posted this lol.

Does anyone know how to solve: "Firmware update failure. Disk write error"?

Hi all,
Here is the list of all what went wrong and where I am now:
1. My Ipod worked well
2. I wanted to update it, you know, the normal thing with Itunes
3. Every time I tried, my computer froze. I was unable to add only one song (both automatically and manually).
4. I took my external drive (where my music is) at work and tried again: same result.
5. I decided to run the Updater I have on the CD that came with the Ipod.(2005-02-07; I usually avoid the newer version, having had once a problem when putting a newer version of Updater).
6. The Updater was unable to operate any action on my Ipode (I don't remember the messages now).
7. Like I tried what I describe here above like a hundred time. I decided to format the Ipod with Windows (My Computer, right click on the Ipod, format).
8. It did and now I have only the famous folder with an exclamation mark on my Ipod.
9. Now when I am running the Updater, it says it cannot Restore the factory settings giving this message "Firmware update failure. Disk write error".
I would appreciate any help because, during the last 2 hours, I read and tried all I found on the Support Help here on the Apple web side without any result yet.
Thank a lot for your answer

Hi Cyrille,
Have you looked at Knowledge Base Document #301267 on "Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod?
Jon
Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more... Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

WiFi Problems - TC to MP, since recent firmware update

Hello,
i found some threads about other people having trouble here, but nothing seemed to fit my situation.
I have 2 Macs - a Mac Pro (Early 2008) and a MacBook (Late 2008). And a Time Capsule, which i purchased sometime between the Macs. Up to now, everything worked perfect, both machines were connected via WiFi to the TC. But since the recent firmware update, the MacBook works fine with the TC, absolutely no problems, but the Mac Pro (a bit longer distance) doesn't work any longer.
This started on Friday (i don't use the MP daily), it was impossible to get a WiFi connection, tried re-entering connection data and so - no success.
On Saturday, i used the cable to check the TC configuration, everything worked fine, and after fiddling around with the setup, i finally got WiFi working again.
Sunday - MP was off all the day.
Today - Just powered it up, no WiFi. When i disable and re-enable AirPort, it gets a connection for a second or 2, but then drops it. If i get a connection, i have a strong signal (all bars black), so signal quality isn't an issue. And before the update, everything worked fine, the only change is the firmware update last week.
The MacBook doesn't have any issues, no matter, where it is located. I'm currently writing this post on it while syncing some home directory stuff with the MP (MB connected via WiFi, MP connected via cable).
So what is this new problem? After damaging USB to complete unusability, Apple now continues with the WLAN features? What comes next? When will all this be fixed?
Meanwhile, i think it was not the best idea to switch to Apple about a year ago. The continous quality drops get painful meanwhile. I wonder when my iPhone gets unusable (which also works fine with the TC, by the way
...Michael

Hi again,
okay. It really was the 7.4.1 firmware. This morning, i reverted to 7.3.2, did a full reset, reconfigured everything, and now my network works fine as it did before.
It seems to be important to reconfigure the TC, as just downgrading the firmware didn't really help, while full reconfig with 7.4.1 also doesn't help.
I now turned off the automatic search for new versions on the TC. I will be informed by the AP Express, which has no problems with 7.4.1 yet.
Hope, Apple re-introduces quality control soon and doesn't make the customers be the beta-testers.
...Michael

HT3728 Does factory reset go back to latest firmware update.

I have resently updated my airport express to latest firmware. The airport express is configured as an extension to my wifi with an Extreme as main device.
Shortly after the firmware update (1-2 days) the express stopped working and status light turned yellow.
I have since then tried to do factory reset several times without getting the device up and running again.
When doing factory reset the status light turns yellow after releasing the button and stays amber with short interval with green (1 second every minute or so)
I have not been able to discover the express from my iPad, iPone or iMac again.
Could the reaons be latest firmware update?
Any advice to get it back to normal?
Thanks,
Per

Does factory reset go back to the latest firmware update.
A Factory Default Reset will not affect the installed firmware.
Shortly after the firmware update (1-2 days) the express stopped working and status light turned yellow.
A solid amber light is unfortunately an indication that the internal power supply inside the AirPort Express is failing, or has failed.
I have since then tried to do factory reset several times without getting the device up and running again.
The AirPort Express has failed, and will need to be replaced.
When doing factory reset the status light turns yellow after releasing the button and stays amber with short interval with green (1 second every minute or so)
This is yet another confirmation that the Express has failed, and will need to be replaced.

Latest Firmware Update Issues with Screen Sensitivity

Hi All,
I synced my original iphone a few days ago and it required a firmware update. Since then, I have had numerous problems with the touchscreen for email and texting. Sometimes, I cannot open a folder on one of my emails or send a text because hitting the "send" icon does nothing. I've restarted my phone and reset it but have not yet tried a restore. Had anyone else had these issues?
And do you have any other suggestions I should try before doing a restore? Many thanks.
Kathy

Do not know about its compatibility and functionality.. but if you are OK with Beta softwares.. you may have a look at..
http://betalabs.nokia.com/blog/2011/03/16/nokia-software-updater-for-mac-available-in-beta?restsso_p...

Can't find firmware update in folder it's supposed to be in

I just purchased the iMac software install CD for Mac OS9.2 and tried to install it on my very old blueberry imac which is now running 8.6. I started the computer up from the CD and everything loads in correctly to start but when I try to install it, a message comes up saying that the firmware needs to be updated and that it is in the CD extras folder. When I open that folder I don't see anything that says anything about firmware updates. Am I overlooking something or is it called something else and I'm just not looking for the right thing? I've exhausted every book I can find and there isn't much about OS9 or firmware in any of them. I don't have that computer hooked up to the internet at the time so I can't download updates. I have access to an iMac (intel) if I can do something to a disk (I've honestly never tried it yet with the new iMac) I just hope you aren't going to tell me I bought the wrong disk, I have a dreadful feeling that $40 later I'm out of luck. I've already been majorly taken by the apple store that screwed up this computer in the first place (sold me and installed the wrong memory, then when nothing would work properly said the memory wasn't right, they took OSX out and said it would not run on this computer, installed OS9 without charging me because of all of the problems, but never gave me a disk for it. Then one day the dreaded blinking question mark appeared and OS9 would never run again so I'm back to good old 8.6 and thought I'd try again. I'd appreciate any help you can offer. It would mean the world to me if I could get this running in OS9.
blueberry imac 333MHZ Mac OS 8.6 or Earlier upgraded memory

Hi, KAC13 -
As Niel has stated, the OS 9.1 CD, p/n 691-2746-A, will work.
The p/n for the retail OS 9.2.1 Install CD (North American English) is 691-3334-A.
Both of those CDs will contain any firmware update required in order to install that version on your model. It would be advisable to test run the disk before proceeding to remove your existing OS 8.6 - boot to it, then try the installer. If you get the "your need to update the firmware" protest at any point, you will still have OS 8.6 on the machine and so be able to install the firmware update.
If that protest does occur, copy the sub-folder containing the firmware update for your model from the CD to the hard drive before trying to install it.

After EFI Firmware update 2.3, MBP Early 2011 will not boot. During restart it all went wrong please help!

Hello,
I've done an ample amount of Internet research to find an answer to this problem however nothing yet found is quite like this. I will start from the beginning.
I am traveling through Europe, and I normally live in California. When I arrived in Ireland my MBP early 2011 15 inch, began crashing constantly when I had several tabs open on Chrome and maybe one or two low CPU/Memory using applications, nothing the 8gb RAM &750gb hard drive can't normally handle. Thus I began trouble shooting. I ran disk utility once started up and repaired both disk and permissions. Still crashing. It didn't seem like it had anything to do with a kernel panic shut down, I never would receive the usual message indicating so. After that I did an SMC reset. It was still crashing. I then upgraded the OSX from 10.8 to 10.8.4 believing it could help. It did momentarily, but then crash again. (When it crashes screen goes black suddenly and upon pressing power button does a regular boot on my single partition). I decided attempting to repair using the Internet recovery option but it appeared my MBP had not yet have it installed, so I downloaded from Apple and began installing. Here I made a mistake, I unplugged the power source as it was restarting. When the gray screen and apple appeared, the loading bar shows up as it says it will when installing the update, but when the bar fully loads it crashes every time. I've tried starting in safe mode, which then loads but never goes further (I let it stand for two hours such as that and nothing). Then I decided to allow the MBP to fully charge overnight to give it time and charge. This morning the problem has stayed the same, even with power source plugged in. Please help I need this to work.
Thank you and please ask any questions!

Your constant crashing problem is probably some type of hardware fault which no update can fix. Doing the 10.8.4 update and then the firmware update just caused further problems. you need to take thr system to a apple store to be diagnosed and fixed if cost effective.

E65 Firmware update yet ?

Similar Messages

Maybe you are looking for