E65 Speed dial problem

Just got a new E65 after dumping my i-mate SP5 Windows Mobile device. I seem to have a bug/problem with the speed dial functionality. The speed dials work fine when using the kepad long press method, but if I select from the on screen application I just get "Invalid phone number". Can anyone help

I managed to resolve this myself throguh trial and error. It seems that the speed dial application doesn't like spaces and brackets in the phone number (as often happens when the number is first entered in Outlook for example), whilst the long key press method doesn't care about this sort of number punctuation. Using +country-code doesn't seem to be a problem in either mode. So I just edited my stored numbers and it works fine.
Also note that the same problem exists with the number used for conference calls, and using the hot key for conference call dialing.

Similar Messages

  • Freetalk-1200 Connect.Me speed dial problem

    Just received my long awaited Connect.Me and it's been working just as I expected. The only problem I encountered was that I couldn't assing speed dial numbers to 2 of my contacts. Others work perfectly, when I click them, box of information appears to the middle of the screen, but when I click one of the two with the problem, nothing happens.
    I have tried everything like resetting from the button and from the web UI, deleting and adding them again to my contacts but nothing helps. Adding new contacts works fine. I would not rather create a new Skype account for my self - nor ask these two friends to make a new account for themselves - just because of this problem. Any kind of advice is welcome
    Cheers from Finland!

    Skype hasn't supported speed dials in it's software for some time.  It's considered a legacy feature. The use of speed dials is configured through the Freetalk Connect Me web interface, not the Skype client.  You need to sign into your Connect Me device via your web browser and click on "Contacts and Speed Dials".  Once there all your contacts will be listed on the left pane.  Select any one of those contacts and click "ADD TO SPEED DIAL".  It will assign a speed dial number incrementally on the right pane.  You can change that number to a number of your choosing (0-99) at any time.  That's all it takes to set up.  If you recently add a contact it my not show on that list.  If it doesn't sign off the client in which you added the contact or contact changes, then power cycle the Connect Me box and log back in.  It should update.  If it does not, the only other alternative is to do a factory reset on the unit so that it will purge the list and updated it with the latest copy.  Below I attached an image of the screen, though it may take some time until it gets approved and displayed to the general public.

  • E65 voice dialing problem

    I realized that not all the contacts has a voice tag. Is this normal?

    Dear François,
    We should shout all together : ANY BODY FROM NOKIA THERE!!!
    I had this problem once again after having discussed with you. I am in Turkey. I experienced the problem completely the same as you described in your post both with English and Turkish languages on the phone.
    I think this is a problem of comptability of any of the following combinations; Phone Software / PC suite / Windows Vista / and, maybe, the silly Toshiba bluetooth stack I am bedly experiencing since I have changed my laptop for about 15 days ago. Before, it was a heaven with XP + Vidcomm bluetooth drivers.
    I will try to describe my environment parameters and what happens when, just expecting that somebody from Nokia may read and bring a solution to this problem as soon as possible.
    The voice dialing is dieing when you synchronize is with PC suite and try to reach text messages and calender on the phone through PC suite. The way I found to solve the problem is to turn off the synthesiser. Swicth the phone off and then swicth it on again and finally turn the synthisiser on. Here you are. It works and also with contacts. This feature is very important for me because I use this feature with my car kit since a while and I was really happy until I had this problem. It was a big comfort.
    My environment, if anybody from Nokia will be interested in:
    I synchronize my E65 with one Vista laptop, one XP laptop, one car kit (Parrot CK 3000) and one GPS device.
    E65 software version is 3.0633.69.00 06.02.2008 RM208
    PC suite versions I keep using 6.86.9.0 and 6.86.9.3.tur
    NOKIA PLEASE BRING A SOLUTION TO THAT PROBLEM !!!!!
    BR
    Yilmaz

  • 9850 speed dial issue

    I have a 9850 os 7.1 and have been having speed dial problems. I can touch and hold a number but the phone will not always dial. Sometimes I have to hold it for 10-15 seconds before it starts to dial. Other time I have to release and try again. I've had this issue on the past few os's .
    Need BB and T-Mobile to kiss and makeup!!!

    I've had that issue on mine, as well.  A battery pull usually does the trick.  To do so, remove your battery while your phone is powered on then replace it.
    I hope  that helps you. 
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • How to set up speed dial?

    I used to have Speed Dial but it suddenly disappeared! I believed I downloaded it again now, but don't know how to set it up. Before, when I opened Bookmarks, I had the option to: Set as Speed Dial. Now that does not show up under the 'Bookmark' tab!

    I've figured out the speed dial problem. But I have a much larger problem:
    A while ago I used Thunderbird for my email. All was find until it requested a password ~ which I never even had! Eventually I dumped Thunderbird. Now I just installed it again, and right from the start, it asks for a password. I DON"T HAVE ONE! I try to enter one, but it just keeps asking for a password. I'm thinking it wants a NEW password, but it won't except any, nor tell me what's required to make an exceptable password. So I uninstalled it again. If you can help with this I'll reinstall Thunderbird, otherwise I'm done wasting my time with it!

  • How to recover Missing speed dials Assistant Console Lost after DBreplication problems

                       Hi everyone,
    Does anybody knows where i can recover lost speeddials (contacts) from Assistant Console (IPMA Solution)  in Call Manager Backups or RTMT files?
    I have 1 cluster with 2 call managers 7.1.3  (PUB and SUB) , the phones registered to SUB and the IP of PUB configured in Assistant Console settings.
    I had a problem with replication of database  between the 2 cucms ,  after i resolved the problem the IPMA solution start to work but some assistants lost part of their contacts in aplication , seems like they return to an old state , they not lost all , but some contacts (maybe the last added) .
    My question is that i want to recover , somehow , the lost contacts , even in the "paper" format , in pub or sub.
    I know tht i can restore the old database , but maybe the old database was corrupted because of dbreplication problems.
    I read already the "Troubleshoot Missing Speed Dials Issue in IPMA   Document ID: 111006" : http://www.cisco.com/image/gif/paws/111006/ipma_speeddail-00.pdf  
    and its useful only to backup the actual contacts , not the missing ones.
    Best Regards.

    Hi Robert,
    We have exactly the same issue.
    We have opened a TAC case and the workaround was to download the new IPMA client from the Cisco website but unfortunatly that haven't solved the issue...
    Have you found something on your side ?
    Regards,
    Nicolas

  • Problem with speed dial

    Hello,
    Just picked up my iPhone 5 and noticed an existing speed dial from my favorites is not working properly.
    My speed dial contains a 10 digit phone number, a 10 digit access code, and a 5 digit password all separated by commas.  When activated from my favorites the phone number dials perfectly but the 10 digit access code, and a 5 digit password dials very slowly and my system does not recognize the entries.
    I deleted the favorite from my contacts and re entered it with the same result. Even re installed ios 6 but no help.
    This feature worked perfectly on my iphone 4. 
    Any ideas your help would be greatly appreciated.

    All,
    Just went to a Verizon store and conducted a test. I used an iPhone 4S and a iPhone 5 both running ios 6. The 4s dialed a programmed speed dial containing an access phone number, a access number and a password. It worked flawlessly. Ran the same series of numbers on the iPhone 5 (not mine) and it failed miserably. 
    I hope that apple can provide a fix for us speed dialers. It's quite annoying. 
    Thanks

  • Speed Dial not auto refreshing correctly anyone else having this problem?

    Speed Dial is not auto refreshing certain windows correctly.

    It was my Sandboxie so I had to make some more configurations to it here's a link to the post http://www.sandboxie.com/phpbb/viewtopic.php?t=12048&highlight=speed+dail.

  • 5800 - cannot speed dial and dial from handsfree c...

    I verified the following behaviour of the new 5800 which seems to me to be a bug, because it works on other nokia series 60 phones:
    Because I synchronize my phonebook with MS Outlook, phone numbers have the syntax "+43 (1) 9876543". These phonebook entries can be dialed without problems when I call using the phonebook.
    But if I use the speed dialing feature (press and hold e.g. key "2" ), I get the message "Nicht gestattet" (German, means "not allowed" ), and the number is not dialed. If I delete the spaces and the brackets, dialing is possible without problems.
    The same behaviour can be seen if I try to dial from my built in handsfree set in my car with numbers as described above.
    Before the 5800 I used a E65 and a 6120c, there the syntax described above worked without problems.
    Software: v11.0.008.red.01
    Any clues?
    Best regards,
    Thomas
    Message Edited by tez1 on 04-Feb-2009 11:52 AM

    magpie68 wrote:
    FIX... 
    I got this, I found out it happened when the number has spaces in it.
    Try cleansing the number of all spaces and punctuation (and prefix with +country code)
    This works for me.
    Alan
    Sorry, this is no fix, this is a workaround. It is clear, that this will avoid the problems. But PIMs like MS Outlook create phone numbers in this format; after synchronization with my phone, there are spaces in all of the phone numbers. Therefore I suggest, Nokia implements this like for all other S60v3 phones. This would be the only fix. Regards, Thomas.

  • Nokia E61/Speed Dial - Invalid number error

    I have synchronized with my outlook to pull my contacts into the phone. I can dial out of the contacts just fine but when I try to assign one to a speed dial button I get an "invalid number" error. If I create a new contact, it works when I assign it but not when I used one pulled in from my Outlook contacts. Any ideas?

    I just noticed something similar to this problem on my E65.
    If I assign a number to my SpeedDial (eg. +61-3-9999-9999) it will work if I use the hard key button to invoke the speed dial.
    But if I start the Speed Dial application and use that interface on the GUI to call the interface the E65 complains "Invalid Phone Number".
    It is strange the the hard-key speed-dial will work, yet the application interface doesn't.
    Any suggestions?

  • How do I set the default page when I select "+" for a new tab? Right now it defaults to Yahoo search and I want to set it to my Speed Dial page. I did have the default page set to Speed Dial but I can't find anywhere how I did it in the past.

    You can set the homepage for opening tabs, but I can't find the setting for designating what page opens when I hit the + button on tabs.
    This is the page that loads:
    http://search.yahoo.com/?fr=freeze&type=W3i_NA,132,3_6,Tab%20Search,20100937,6693,0,16,0
    How did Yahoo embed this in the Tab settings?

    Firefox '''does not''' come with a setting for a page that opens in a new Tab, the default installation always opens a blank page when you open a new Tab. Many extensions include a feature to open their choice of a webpage when you open a new tab, as does the Speed Dial extension which uses a "local page" internal to Firefox.
    You need to figure out which extension has taken over that preference that Speed Dial needs to use. You didn't bother providing a Troubleshooting Information... listing as requested when you asked this question, but I can guess your problem is related wither a Yahoo extension or a Conduit / OurToolbar extension - as there is a plugin listed = Package Installer & Install Conduit.
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • I can no longer Dial my speed dial numbers by bluetooth after GB update....HELP

    I can even deal with the fact that it erased my original speed dial settings. What I cannot deal with is the fact that BY LAW i must use a hands free device wihle driving but since the GB  update I can no longer Dial my 9 speed dial numbers by Bluetooth. Trying to push the number and hold it for a few secs not only breaks the law and jepordizes my kids in the car . Here how it works ( or supposed to work. I push the button on my head set. It says " Say A Command ". I say Call speed dial 3. It repeats it back to me. I say Yes. It NOW dials the last number dialed. I never had this problem before the update.  
    Motorola Droid X now with Gingerbread updated OTA
    Bluetooth is a Blueant Q1 with the App running on the Droid and updated to its latest firmware of 8.21
    Help 

    Adam819 wrote:
    I can even deal with the fact that it erased my original speed dial settings. What I cannot deal with is the fact that BY LAW i must use a hands free device wihle driving but since the GB  update I can no longer Dial my 9 speed dial numbers by Bluetooth. Trying to push the number and hold it for a few secs not only breaks the law and jepordizes my kids in the car . Here how it works ( or supposed to work. I push the button on my head set. It says " Say A Command ". I say Call speed dial 3. It repeats it back to me. I say Yes. It NOW dials the last number dialed. I never had this problem before the update.  
    Motorola Droid X now with Gingerbread updated OTA
    Bluetooth is a Blueant Q1 with the App running on the Droid and updated to its latest firmware of 8.21
    Help 
    Food for thought:  There is actually information released by the NTSB that even using "hands free" devices while driving have been proven to  distract drivers.
    As for the Bluetooth commands: I've never used "speed dial" I usually say "Call Nicole Mobile" and it will connect still with no problems.
    I just tried to use the voice command "call speed dial 1" and it did not recognize it.  It appears you must use the name now.

  • Speed dial only has one icon, to open up the windows. Another used to be on the other end of the tool bar for entering websites into the windows. Also do not know how to form another group.

    I have just downloaded Firefox into a new computer. The firefox I had in my old computer had one (9 pt) icon at one end that brought up the speed 9 speed dial windows. It also had another similar icon at the other end of the tool bar that you could click on and place a website you were looking at into a particular window. This add on does not have that feature, which makes it very hard to make entries into the windows.
    Also I have not found the way to add other groups of windows as I had before. I could even label them in categories. What to do?
    My Computer is an HP p6653w and my default browser is Firefox 3.6
    My operating system is windows 7.

    Hi,http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03149924&cc=uk&dlc=en&lc=en#N89
    First, I am sorry to see your experience, however be aware that this forum is a peer-to-peer community and not a direct contact with HP.
    To clarify, the product specification do list the ink cartridges regionalization, the specifications itself reffer to HP Suresupply to locate the ink cartridges for your region, as well as the following document which clearly state that information:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03239171&tmp_task=prodinfoCategory&cc=uk&dlc=en...
    Firs be sure to have the latest software installed prior contacting HP support, which should be listed as 28
    You may find that information listed in the following document (Check the How can I tell which driver version I have? section), if you have any older version be sure to uninstall it and install the latest software, as listed within the same document:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03149924&cc=uk&dlc=en&lc=en#N89
    If you need, the latest software can be found below:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-108821-3&cc=uk&dlc=en&lc=en...
    Next ensure you have any of the 564 ink cartridges, once the printer being reset it require all the 4 ink cartridges to work
    Finally check the private messages I sent you prior contacting HP support , the envelope icon at the top-right part of that screen.
    The ensure you use the correct contact details lease double chekc it below:
    http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • N8 "Speed Dial" Reboot Issue...?

    (original post link)
    I have pr1.0 s/w 011.012, I also think it is a custom version, will speak to my carrier and post back later.  But in the mean time it seems I am not alone with this issue.  After googling I found others seem to be having the same issue, there might be bug after all regardless of the f/w & s/w release you have.
    (see posted links to this forum below.)
    speed dial issue link #1
    speed dial issue link #2
    speed dial issue link #3
    speed dial issue link #4
    Thanks jon, your assistance is greatly appreciated.

    Yes I have the same issue, although I have'nt worked out what causes it to do this there is definately a problem.
    Some are saying it might be the use of various characters like these " [ { ( ) } ] ' etc, but I dont use these in my contacts as I found out a long time ago some mobiles just dont like them.
    Although it does not happen all the time, the frequency I found was about 3 out of 10, when it starts doing it it will continue to do it for 2 or 3 times in a row.
    Currently I just dont use speed dial, which is a massive pain in the but.
    I had created a post here which I will leave open for now and see what the outcome is.  I have searched and its clear others are having the same problem.
    Come on Mr. Nokia ... time to have a look at this as I have had x3 N8's replaced because of this, and in 1 instance I was fortunate enough to show the team @ Vodafone, do I now have to show the Optus team the same issue's.
    Thanks.

  • Am using windows 7 and upon installing firefox 4 i installed speeddial extension and it was working fine but after 2 days speed dial no longer appears why is that?

    upon downloading firefox I added speed dial . It was working fine for a couple of days but yesterday when I opened up firefox which I made as a default browser because of the speed dial it no longer appears even though it is still appearing as one of the extensions and is enabled

    Hello Steve.
    You may be having a problem with some extension or plugin that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    If you detect a faulty add-on, you should contact its author for support. You can also search for alternatives. Site filters are relatively common in the add-ons gallery: [http://addons.mozilla.org addons.mozilla.org].

Maybe you are looking for