E65 unable to format phone ..

1, when removing software from app manager, it only remove the icon not the system files
2, the 3 button format (buttons green + 3 + * ) does not work work at all.
3, if your nokia e65 develops a software problem the code *#7370# and *#7780# wont help as they only restore back to manufaures default.. they dont wipe the writable memory clean.
HELP !!!
E65-E70-E61 Sip / Voip

the buttons green + 3 + * work.keep them pressed till the phone comes on
At last a nseries phone im truely happy with THE N82

Similar Messages

HT4061 unable to unlock phone as it is asking for a password i do not have

unable to unlock phone as it is asking for a password i do not have?

Hi Danny,
You will need to follow the instructions in the support article link below that best apply to your situation:
http://support.apple.com/kb/HT1212
Good luck!
Cheers,
GB

Unable to format partition, disk may be damaged

I was experiencing a problem with my Windows XP installation on Bootcamp. The Windows side kept restarting, and I could not find the reason, so I formatted with the Windows XP disc and tried to re-install it, but it didn't work. I forget the exact error as to why. So I went back to the Mac side and re-formatted the partition sing Bootcamp, and now when I try to re-install the Windows XP on the Bootcamp partition, I get the error:
Unable to format partition, disk may be damaged
What can I do? I don't understand, because this disk has worked before and I am on the mac side right now, so the actual disk does not appear to be damaged. What can I do?

Do a full format as it will check for errors and mark bad clusters if it finds any (full format = quick + chkdsk /x ), but only create one OS partition e.g like 30GB or something , this will be plenty enough for the os ,instead of the whole drive . Will save you time .
Wait with partitioning the rest of the drive as an extra partition until the OS is installed using diskmanagement .
Also make sure sata-dma is enabled in bios .

ICloud you have the ability to NOT format phone numbers of contacts; this ability is not available on the contacts of iPhone. If I set-up a phone number in iCloud with NO parenthesis, ex. 123- 456-7899, then this format should be available on the iPhone

In iCloud you have the ability to NOT format phone numbers of contacts; this ability is not available on the contacts of iPhone. If I set-up a phone number in iCloud with NO parenthesis, ex. 123- 456-7899, then this format should be available on the iPhone contact.

That is correct is doesn't. Standardized formatting of phone numbers in the iOS app is more important because it supports contact from a variety of locations (gmail, hotmail, etc.). iCloud doesn't (not directly).

Win XP Unable to format hard disk and install

Recently my system has got error about system hive error
"C:\windows\system32\config\sysem file missing"
So when I tried to reinstall the system the winxp setup says
unable to format my hard drive after I choose C Drive to Quick Format(NTFS) and install option,this note appears
"setup was unable to format drive c:the hard disk may be damaged
make sure the disk is on and properly connected to the computer .If the disk is a SCSI disk,make sure your SCSI devices are properly terminated.See your computer or SCSI adapter documentation for more info"
Thinking that the hard disk(Seagate Barracuda 160GB SATA) might have corrupted I used Seagate seatools to check for error and the test failed. So I replaced the hard disk with brand new WD 160GB SATA hard disk and started installing the winxp. Again I'm facing the same problem. Even I checked with the new connection port.
I'm using AMD Sempron Processor. MSI K9MM-V Motherboard. dynet 512MB RAM.
As the problem is existing even with the new hard disk I think there is no problem with the hard disk or cable. the problem must be something else.
Please help me find the problem and rectify it.
(My hard disk is SATA and No-RAID, No-SCSI, BIOS detects my hard disk and I'm able to create partitions but unable to format and install WinXP)
I've used the same hard disk on another system with MSI Mother Board but it's working fine. Windows XP installs without any problem. I've replaced the hard disk in which the Win XP already exists(Win XP installed on another system with same configuration MSI K9MM-V Mobo, AMD Sempron Processor, 512MB RAM) But it hangs the system and when I restart the system it says,
"Windows Could Not start because the following file is missing or currupt:
\Windows\System32\Config\System
You can attempt to repair this file by starting windows setup using the original setup CD-ROM. Select 'r' at the first screen to start repair."
I've tried this some 10-15 times every now and then this problem is popping up.
So I think this is not the problem with Hard Disk. It must be the problem with Mother Board. So please help me resolve this issue.

Good luck!
But please remember what you wrote: "BIOS detects my hard disk and I'm able to create partitions but unable to format and install WinXP",
and what Bas wrote about listing your system components.
Have a minimised system when you install Windows.
A cloned copy of Windows can do this, for example one that a back-up program made.

I have restored my iPod classic and everything has been wiped off, now when I connect it to the laptop, iTunes doesn't recognise it and windows won't format it, an error message comes up "unable to format"

I have restored my iPod classic and everything has been wiped off, now when I connect it to the laptop, iTunes doesn't recognise it and windows won't format it, an error message comes up "unable to format". Can someone please help me sort this problem, it's so frustrating!!!!!!

It could be an indication or a damaged or dying hard drive. I would recommend doing a disk diagnostic on the iPod's HD using the instructions given by turingtest2 in this older thread. He also covers what the resulting numbers indicate.
https://discussions.apple.com/thread/3784647?start=0&tstart=0
B-rock

Portege R100: 4GB SD card runs very slow - unable to format

Laptop working fine, no issues when using 1GB SD card. When 4GB SD card inserted PC runs very slow. Eventually I am able to run Toshiba SD Memory Card Format software (latest download version). It doesn't seem to recognise 4GB card. Unable to format. When tried later with 1GB card everything works well.
Has anyone been able to get a 4GB SD card working ?
I am not sure whether the laptop software needs a patch, or if 4GB card is not fully compatible with SD card standards, though it was bought from reputable supplier.
Graham

Hi
I think its nothing wrong with the software but the SD card is simply not 100% compatible.
In the last time the SD card sizes increase rapidly.
I think the card reader and the software were not designed to handle such big SD card like this one.
How about buying an external SD card reader?
Such devices are not very expensive and I think the newest generation should be able to handle also the 4GB SD cards.

Unable to received phone calls & SMS

Hi,
My iPhone 4s unable to received phone calls and sms. I would like to seek for advice on these problems.
Thank you.

step 1
reset network settings
settings >general>reset reset network settings
or
step 2
backup and restore
http://support.apple.com/kb/HT1414
or
step 3
contact carrier

Formatting phone number: how to get rid of (...)?

I live in Romania, and Contacts incorrectly formats phone numbers of the type xxxx xxx xxx (10 digit, the national standard, out of which the first is zero) into (xxxx) xxx xxx, i.e. inserting brackets before the first and after the 4th digit respectively. This is wrong. The bug is seemingly banal, yet it has bad consequences: if phone numbers are exported to Android, some Android devices, not all, alas, cannot dial such numbers and the process is stopped. Well, this may be a bug in Android, nevertheless the problem exists.
A workaround is to choose another country as standard, e.g. Czech Republic. It works, but only for numbers added from that/this moment on, it does not remove (...) from the existing numbers.
Q: how can I remove those stupid brackets (....) from the existing phone numbers? I need a global solution, a script or something...
I reported the issue to Cupertino but they seem to be extremely slow, I do not understand why. Those brackets are incorrectly inserted, the national standards specifies a 10-digit number, out of which the first is zero, which is removed in case of international calls, and the prefix is added.

Self answer: I changed country at hazard to Czech Republic, and all the phone numbers have been meanwhile changed from the wrong format (xxxx) xxx xxx to the correct format 0 xxx xxx xxx
Praise be to hazard settings.
P.S. Yes, I marked myself with a green bingo.

I just upgraded my iPhone4s to iOS7 and now I am unable to make phone calls and send/receive text messages. Network signal indicator on the upper left side of the display shows hollow circles instead of full circles. Any idea how to fix the problem?

I just upgraded my iPhone4s to iOS7 and now I am unable to make phone calls and send/receive text messaes. Network signal indicator on the upper left side of the display shows hollow circles instead of full circles (but with the network provider name). I checked with my colleagues in the office who use the same network and theirs work just fine on iOS7. Any idea how to fix the problem?

I have also called my service provider and my service remains active in the network. I tried removing and reinserting my SIM but to no avail.

How does one format "phone numbers" using "Numbers"?

Want all phone numbers to format as (555) 555 5555
How is this done?

Hi Thomas,
The old Numbers will be on your computer unless you deleted it. Look in a folder called iWork '09 inside your Applications folder. Launch Numbers 2 (Numbers '09) and do what you used to do to create a Custom Cell Format. For example, you might want a nine-digit phone number to appear as (123) 456 789.
Save that document. To protect it from Numbers 3.0, make a copy of that document with a different name. Ensure that both your original Phone Number documents are closed (to protect them from that bully Numbers 3.0). Then Open the copy in Numbers 3.0. The custom format will be listed in Format Inspector > Cell > Data Format
Type a nine-digit number into any cell and format the cell with Format Inspector > Cell > Data Format > Phone Numbers.
Note: copying a cell with Custom Format in Numbers 2 and then pasting into Numbers 3 does not work. The pasted cell ends up as Text, and the Custom Format is not added to the Data Format list.
Regards,
Ian.

Why "Unable to retrieve phone information"

I want to update my Nokia N81 8GB Device but in nokia software updater i recieve an error . Error is this :
"Unable to retrieve phone information"
How Can I Update My Device

Ha ! I forgot , My product code is 0557891 !
Thx 4 helping me !

Software Update Error "Unable to retrieve phone in...

Hi ...
I have Nokia E50 and i am trying to update its software from Office LAN but i am getting the message "Unable to retrieve phone information". I have latest NSU v 1.4.14 installed on my machine. There is also a new firmware version available. Can anyone help me out on this ??
Thanks

Check the Firewall for a USB connection? mmmmm... Anyway, besides the firewall being controlled by my company, I've always succeeded in updating the phone until now.

I pressed the erase all media button now unable to start phone help pls

hi ive pressed the erase all media reset button now unable to start phone when i go to start phone the apple logo comes on and the rest of the phone is black n blank please help. thank toplad

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Create installer and running: MsiError 87: Unable to format error record.

Ever since I have installed the Labview 2011 beta I am in trouble when creating installers that include the NI runtime.
Whether it is Labview 2010 or 2011, when I have created the installer and run it, I -and everybody else- gets the warning:
MsiError 87: <Unable to format error record.>
And the installer qwill quit.
When I exclude the runtime from the installer it works nicely. What can I do to fix it?

Did any of you actually read the beta agreement?
Issues with the beta are not be be discussed in public so don't keep posting here.
The terms and conditions of the beta program are posted on the beta site and you agreed to them, so make sure to fully understand them. The only public information is that a beta exists. Everything else is confidential.
Let me put it in a few simple words:
"Welcome to Fight Club beta. The first rule of Fight Club beta is: you do not talk about Fight Club beta. The second rule of Fight Club beta is: you DO NOT talk about Fight Club beta!)
LabVIEW Champion . Do more with less code and in less time .

E65 unable to format phone ..

Similar Messages

Maybe you are looking for