E65 - Writing messages

I am now on my 3rd Nokia E65 within 3 weeks, because when I write text messages the screen often flashes whenever I start a new line. However it is inconsistent and really quite random. Unfortunately it is highly irritating and it was not 3rd time lucky as phone number 3 is also doing it. Has anyone else encountered this? Please help!!!!
Other than that the phone is pretty cool.

This is a common problem on the E65. Mine does it too.
It is a software problem and nokia have not released any software updates to fix this problem, along with it's bucket load of bugs.
The E65 could be a great phone if nokia fixed it's dodgy software.

Similar Messages

How to turn my keyboard rotate when writing message

How do turn on orientation lock？when writing message iPhone 4s keyboard can not rotate or clockwise. Where to switch on the function button

First you ask how to turn on the orientation lock, then you say your screen won't rotate. If the orientation lock is on, the screen won't rotate. To verifiy if it is on, look by the battery symbol and you should see the little lock with a circular arrow around it. To toggle it on and off, double click the home button and swipe to the right to bring you to where the iPod controls are. The orientation lock is right there.

Posfix error writing message: File too large

I was looking for a reason for my Mac hanging occasionally. In Console I found the following recurring error message.
10/2/11 8:15:19 PM     postfix/master[656]     daemon started -- version 2.5.5, configuration /etc/postfix
10/2/11 8:16:00 PM     postfix/pickup[657]     B6095D33A25: uid=501 from=<Al>
10/2/11 8:16:00 PM     postfix/cleanup[664]     B6095D33A25: message-id=<[email protected]>
10/2/11 8:16:00 PM     postfix/qmgr[658]     B6095D33A25: from=<[email protected]>, size=668, nrcpt=1 (queue active)
10/2/11 8:16:00 PM     postfix/local[666]     B6095D33A25: to=<[email protected]>, orig_to=<Al>, relay=local, delay=0.08, delays=0.04/0.02/0/0.02, dsn=5.2.2, status=bounced (cannot update mailbox /var/mail/al for user al. error writing message: File too large)
10/2/11 8:16:00 PM     postfix/cleanup[664]     C5ACFD33A28: message-id=<[email protected]>
10/2/11 8:16:00 PM     postfix/bounce[667]     B6095D33A25: sender non-delivery notification: C5ACFD33A28
10/2/11 8:16:00 PM     postfix/qmgr[658]     C5ACFD33A28: from=<>, size=2366, nrcpt=1 (queue active)
10/2/11 8:16:00 PM     postfix/qmgr[658]     B6095D33A25: removed
10/2/11 8:16:00 PM     postfix/local[666]     C5ACFD33A28: to=<[email protected]>, relay=local, delay=0.01, delays=0/0/0/0, dsn=5.2.2, status=bounced (cannot update mailbox /var/mail/al for user al. error writing message: File too large)
10/2/11 8:16:00 PM     postfix/qmgr[658]     C5ACFD33A28: removed
10/2/11 8:16:19 PM     postfix/master[656]     master exit time has arrived
I haven't done anything with Postfix, but I'm guessing one of the monitoring utilities is set up to send me an email message if it finds an error.
Looking for ideas on how to fix this.

Well, I think I figured this out.
I found this posting on a message board http://www.linuxquestions.org/questions/linux-networking-3/file-too-large-in-pos tfix-495988/#post2480213
I ran this command in terminal: sudo postconf -e "virtual_mailbox_limit=0" then: sudo postfix reload
That still didn't fix the error messages.
Then I ran this command in terminal: sudo postconf -e "mailbox_size_limit=0" then: sudo postfix reload
That stopped the "file too large" error message.
Now the console message I get is:
postfix/master[1630]          daemon started -- version 2.5.14, configuration /etc/postfix
postfix/pickup[1631]          68EA012A66BD: uid=501 from=<Al>
postfix/cleanup[1643]          68EA012A66BD: message-id=<[email protected]>
postfix/qmgr[1632]          68EA012A66BD: from=<[email protected]>, size=707, nrcpt=1 (queue active)
postfix/pickup[1631]          BA07112A66BE: uid=501 from=<Al>
postfix/cleanup[1643]          BA07112A66BE: message-id=<[email protected]>
postfix/local[1645]          68EA012A66BD: to=<[email protected]>, orig_to=<Al>, relay=local, delay=0.82, delays=0.5/0.09/0/0.23, dsn=2.0.0, status=sent (delivered to mailbox)
postfix/master[1630]          master exit time has arrived
I'm guessing this is normal function of the postfix system. However, I'm still not sure what postfix is doing. Maybe its the under-the-hood stuff for Apple Mail?

TS3694 i updated my iphone 4s to ios 7.0.04 thru itunes but i started to have problem writing messages because oftentimes nag hang hang , how can i fix it the problem ?

hi, can you help me address this problem, I'm having a difficulty writing messages because my iphone suddenly hangs up. It started after I updated my phone to 7.0.04 IOS version

Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Then reset: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

E65 small message alert font

I recently purchased a nokia e65 phone. Ive noticed the message alert box is so small you dont really know that youve received a message. somehow out of luck while fidding around with it a larger box appeared at the bottom of the screen. unfortunately i somehow managed to lose this setting and it has again gone back to the very small writing in the line above the "no cal entried for today" line, for a new message received. can anyone help me who may have encountered this same problem please. ive gone through the whole manual and there is no help in relation to this. its driving me crazy, given Im so used to it on my previous phone.
thanks

The last name first name display for contact in the SMS inbox is completely retarded. If you enter a contact into your contact list with their entire name in the 'first name' field, then the SMS inbox will display a message from that person with first name last name. That's good.
But if you put the contact's first name in the first name field, and their surname in the last name field, the inbox will display them in last name first name order. That's just dumb. And btw this is all with the contact list set to show first name last name.
How can there be no setting to change this? So annoying.

SQLScript , writing messages to log file

Hi,
We're developing SQLScript and executing them directly on Unix via Unix command HDBSQL. We use the -o keyword with HDBSQL to write messages like comments, custom errors into a log file. The only way we know how to force custom messages into the log file is the SELECT "Text" FROM DUMMY.
Now our SQL consists of multiple procedures that may be called in a nested fashion i.e Proc 1 calls Proc 2 which in turn calls Proc 3. We noticed that the SELECT FROM DUMMY way of writing comments into the log only works if the procedure is the first procedure in the line of nested calls(Proc 1). SELECT FROM DUMMY from a sub/nested procedure does not make it to the log file.
Is there any other way we can achieve this? Other DBs have options like DBMS.output which work well in such scenarios.
I would like to thank this group for being ever so helpful in all the issues we have faced so far.
Regards,
Nehal

Hello,
I do not agree. have you taken a look at Oracle9i Supplied PL/SQL Packages and Types Reference?
You can use UTL_FILE and DBMS_OUTPUT to achieve exactly what you want.
Rgds
Fidel

Writing Message Filters Script via CLI

Is there any document to refer while writing scripts for message filters?
My ESA is on version 8.0.1 and I am unable to make text "case insensitive" while checking that text under "contains" rule? Is there any mechanism to look for text by ignoring the case?

using (?i) in either message or content filter will allow case insensitivity to be used.
Ex.
subject == "(?i)\\[SEND SECURE\\]”
* Q: What does (?i) do? Case insensitivity. Allows for “[SEND SECURE]”, “[send secure]”, “[SeNd SeCuRe]”, etc.
http://www.cisco.com/c/en/us/support/docs/security/email-security-appliance/118013-config-cdc-00.html
See either the Email Security End User Guide, or the older Advanced Configuration Guide - and look for the "Using Message Filters to Enforce Email Policies" section for full information and examples!
http://www.cisco.com/c/en/us/support/security/email-security-appliance/products-user-guide-list.html
I hope this helps!
-Robert
(*If you have received the answer to your original question, and found this helpful/correct - please mark the question as answered, and be sure to leave a rating to reflect!)

E65: Encrypt Message Folder

Is there any application to encrypt messages folders in a nokia phone?

None that I am aware of.
I use a software called 'Advance Device Locks' on my E90 and E50. This SW can protect the built in messaging program (or any other Application) from opening without a password. (I think it should be usable on E65 too, you can download a trial version and test it).
This SW has other, usable, features but I extensively use 'Application protection'. Especially for Gallery, File Manager and Messenger (which save username and password and will sign in once selected).
Hope this will help.

Problem writing message Nokia6300

I just bought a nokia6300 silver..
The problem is when writing a message, I need to press the # several times to have the correct format (abc)... Can someone tell me how to set abc as default writing format? I am having arabic a default.. I already selected english but the writing format is killing me..
Thanks

Personally, I have never userd a Nokia phone with anything other than roman-alphabet languages on, so I'm not sure, but I thought it was determined by the "phone language" setting, not just the writing language setting, so it may default to Arabic if you have Arabic as the phone language.
I think that the writing language settings just determine the T9 dictionary settings.

Writing message mapping function in Java in integration repository

Hi XI Pundits,
I am new to XI. I was working on Message mapping in intergration repository.
To map the source messages to target messages, we do graphical kind of mapping like drag and drop.
There are some functions aavilable at the bottom like concatehate, trim and etc. which we use if we need to modify the source message and map to target.
But in case we face a situation when we don't find the function which suits our requirement, I guess we need to write a new function. We can write these new function using Java only.
Can someone throw some light on this ?
<b>What do we do to invoke java editor in integartion reposity to write mapping function in java ?
Can someone give an example of snippet of code ?</b>
Thanks.

Hi Tushar,
Go thro this help link. You will get all info about User defined function.
http://help.sap.com/saphelp_nw04/helpdata/en/22/e127f28b572243b4324879c6bf05a0/frameset.htm
To get more understanding on mapping go thro this link(PDF File)
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9202d890-0201-0010-1588-adb5e89a6638
Hope this helps.
regards,
P.Venkat
Message was edited by: Venkataramanan

Writing messages to log file from database procedures

Folks,
Is there a way by which I will be able to write messages from a database procedure to a log file? I would like to know what a procedure is doing and if it has failed or suceeded just as we do in a Unix shell script where we can direct messages to a file.
e.g. echo 'step 34 completed' >> $X_LOG
Is there a log file in Oracle where we can check if a procedure has failed and what was the error. I am using Oracle 9i.
Thanks.

Hello,
I do not agree. have you taken a look at Oracle9i Supplied PL/SQL Packages and Types Reference?
You can use UTL_FILE and DBMS_OUTPUT to achieve exactly what you want.
Rgds
Fidel

E65: Hide Message Notifier

This is only a minor problem yet it still bugging me everyday. Im having trouble with this message notifier, "1 new message". It always appears on screen eventhough the message notifier of the Active Standby is on. Before I already disabled it, but when I restore my phone settings it keeps on displaying everytime a new message received. I can't now remember how did I disable that message notfier. I simply dont used to it. It really annoys me everytime i saw that message notifier. I want only the message notifier of the Active Standby to be displayed. Please help me with this.
Thank You!

jimmyireland wrote:
check your sim messages go to messaging options sim messages read or delete these messages
here is an online guide to help
http://nds1.nokia.com/phones/files/guides/Nokia_E65-1_UG_en.pdf
its not the content that i wanted to hide, its the notifier itself.
Message Edited by jejelljellyn on 07-Jan-2010 05:09 PM

Pop up notification while writing message

what should i do with this: everytime i go to messages a notification will pop up saying: "cellular data is turned off -- turn on cellular data or wifi to acces data"
my network doesn't support mms 3g and i'm using ios 4.3.3. anybody plssss...?????

I am sorry but it is not possible to throw pop up every time, actually workflow consists of background task which got executed without user intervention and in those cases no pop up will come up.
You can get pop up box for dialog task (such as user decision etc)you have to write down business object method code for that.
there are many ways you can handle your situation:
1. Write down the Check FM for FIPP-Posted Event where you can check it whether it is approved or not, If not then do not complete the workflow and start some dialog WI and send across to approvers
(It is just outline, you have to formulate the solution around this outline).
2. Also you can check for BAdi or user Exit and directly can write down message for that, It seems more easy.
Cheers
Jai

Problem in writing message to a file

Hi all.
I am now working on a message listener which will get the message from the queue, then write to a file and process the file to import the data into database.
The message the listener gets is in XML format. But in my program, I just cast the message to TextMessage and then get the String by message.getText() and write to a file.
The problem is I found extra space or characters appear in some of the xml tag. Would it be any problem of my coding? Do anyone have some ideas on it? Thanks for advanced.
Priscilla

Try to write arbitrary hard coded xml tags to a file using ur code. If its fine, then its in the message if not then it in ur code.

Writing messages in FM

Hi,
I am using the WRITE statement in the FM, and it is not very efficient because it doesn't write to the screen. What ABAP statement should I use to collect messages to a log or somewhere I can review later?
Thanks
RT
Message was edited by: Rob Thomas

Generally if you look at the standard FM, there will be return table, where in all the messages will be appended.
For BAPI's it will have a return structure BAPIRET2.
Or like Suresh suggested, you can raise a exception, however by doing that the further execution of the function module will stop.
Regards,
Ravi

E65 - Writing messages

Similar Messages

Maybe you are looking for