E66 automatically 'selects' written text in forms,...

Dear all,
My E66 phone is really annoying me. If someone here has no proper solution for this problem, I think it's a problem with my phone only.
The problem is that, wherever I write, especially when I fill in 'forms', after a while it automatically turns in a mode where I only can select the written text. At that moment I can't just go to the next place to fill in or leave it just like that or save the changes I made. I have to close the whole program or option I am using.
This happens with for example Nokia Maps by filling in the search options (Place, Address, etc.) and by adding an entry to my calendar. Sometimes I'm already stuck after writing the event-title. The most annoying is getting stuck after writing an SMS. I can't properly delete parts of my message anymore because when I go back with the key it automatically selects the text.
Has anyone else this same problem? I have the newest firmware, and the problem still exists.
If there is a solution I really would like to know it. I have already reset my whole phone once and that even didn't help out.
Greetings Kevin

I had the same problem on both E51 and E66 after I installed the Garmin GPS Navigator... I unistalled that and everything now works fine.

Similar Messages

  • Mail Subject Line Automatically Selects All Text When Typing

    In Mail I'm typing along in a subject line and randomly the all of text I've entered becomes selected. Then my next keystroke deletes the first entered text. Very frustrating, and I can't figure out why this happens. Maybe OSX's spell checker? How do I turn that off to test?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac. 
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing. 
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects. 
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands. 
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply. 
    Launch the Terminal application in any of the following ways: 
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) 
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. 
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. 
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign. 
    Step 1 
    Triple-click the line of text below on this page to select it:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit 
    Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
    Step 2 
    Repeat with this line:
    { sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook; sudo crontab -l; } 2> /dev/null | open -f -a TextEdit 
    This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. 
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step. 
    Step 3
    { launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; crontab -l 2> /dev/null; } | open -f -a TextEdit 
    Step 4
    ls -A /e*/{la,mach}* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -f -a TextEdit  
    Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting. 
    Step 5
    osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit 
    Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output. 
    You can then quit Terminal.

  • Possible to automatically select text field data on enter

    I have been trolling this forum for a couple weeks and have figured out everything on my form except this issue.
    I would like my form to automatically select the "data" that is in a text or numeric field when the field is entered. 
    For example:  If I open a form that has been filled out previously I would like each field's data to be selected when I enter the field either by tab or clicking on the field.  This way I can overwrite the current data much easier without having to double click to "select all" or backspace to delete the current field.  It is possible that the data should stay the same so I dont want the data to be deleted on enter just "selected"
    Thanks for your help,
    Joe

    Hi Joe, When using the keyboard and tabbing to a field all the fields contents are selected, but this doesn't happen when using the mouse and clicking into a field.  Have a look at this sample which tries make the mouse behave the same as the keyboard http://adobelivecycledesignercookbookbybr001.blogspot.com.au/2013/05/on-click-select-all-t ext-in-form-field.html.  Bruce

  • Why does my cursor not automatically select the entire word when I try to select text by starting/ending in the middle of a word?

    In any other browser I've used (or word processor, for that matter) when I select text using my mouse cursor, if I start and/or end in the middle of a word, it automatically selects the whole word when I'm selecting more than one word. But for some reason this is not happening in Firefox. If I try to select say 3 words, and I start in the middle of the first word and end in the middle of the last word, it will only select those parts, not all 3 words entirely.

    Firefox allows to select part of a word. You can select a word with a double click and use Shift + left click to set the end of the selection, so you need to click at the end of the last word instead of in it.

  • Is there a way to automatically resize the text box to fit the text inside, without using the selection tool to resize the corners in Illustrator and Photoshop?

    I'm wondering if there is a way where I can quickly resize a text box to fit exactly around the text inside, so pretty much the smallest the text box can go without being too small to fit the text? I know you can do this manually with the selection tool, but is there a button/command that automatically does this in one go?
    Thanks

    Try this script. Save the page as .jsx the the "Presets>Scripts" AI folder. When you restart AI it will appear in the "Scripts" menu. Select the text block and run the script.
    Thanks to Nathaniel Vaughn KELSO for the script.
    http://kelsocartography.com/scripts/scripts/nvkelso/FitToTextContent_v2.jsx

  • JTextField and "Automatic" Selected Text

    Hello:
    I'm developing a Java application that uses, in the same window, some JTextFields.
    I con move from one JTextField to another one by using the tabulator (TAB) key. I would like that, when one textField gets the focus thanks to pessing the TAB key, the whole String (text) contained on it becames "selected".
    Is it possible? How can I select the text automatically?
    Lots of thanks!

    Read the API documentation for the javax.swing.text.JTextComponent class.

  • How to select row automatically in matrix (exp:automatic select row no 2)?

    Hi
    example i fill matrix row no 1 - 3 in serial number selection form or else (from database data)
    and i want to automatic select row no 2
    and i really have a big problem to do this
    oQuant = edit text
    oColumn = column
    oForm = form
    here some of my code
    ====================================
    formID = pVal.FormUID
    Set oForm = SBO_Application.Forms(formID)
    Set oMatrix3 = oForm.Items.Item("5").Specific
    Set oColumn3(3) = oMatrix3.Columns.Item("19")
    Set oQuant(5) = oColumn3(3).Cells.Item(2).Specific
    =====================================
    i tried
    oMatrix3.SelectRow 2, True, False
    but it didn't work , it's said that not user defined item
    oQuant(5).Active = True
    it works but that not the select what i want
    pls some one help me
    i really need it right away
    Thanks

    Hi chetan
    Thank You for your reply and yes i didn't write selection mode for my matrix
    but when i tried both of these code it still didn't work (for information i'm using visual basic 6, so it has a different syntax about .net and VB6 - exp: for .net  oMatrix.selectrow(2,true,false) , for VB6 oMatrix.selectrow 2,true,false )
    oMatrix.SelectionMode = SAPbouiCOM.BoMatrixSelect.ms_Auto
    oMatrix.SelectRow 2, True, False
    oMatrix.SelectionMode = ms_Auto
    oMatrix.SelectRow 2, True, False
    is there any presiquities for selection mode ?? because I always have <b>warning</b> on oMatrix.selectionmode
    "<b>Item - the item is not user defined item</b>"
    Edit : it works when i created a form and select row no 2,  but it didn't work with serial number selection form which the form is already exist in SBO (serial number selection is the form after klik add button in good issue form)
    Thanks

  • Automatically Selecting Values in Multiple Values Dropdown Parameters

    Hi,
    Is it possible to have parameter values automatically selected in a dropdown in an SSRS report?  I'm using SQL Server 2008 R2 Enterprise edition.  Basically what I have in mind is this:  The user wants to save his parameter selections in a
    table that will be available as a dropdown parameter of a report, call it
    ParamUserSelection.  ParamUserSelection is the first parameter of the report and other parameters depend on it.
    We have two other parameters called ParamCountry and
    ParamState.  These are dropdown text parameters that allow multiple values to be selected.  Populating the list is not a problem as I use a standard cascading parameter technique.  What I'm trying to do is the following:
    The user selects a value from ParamUserSelection, call it Selection1.  Selection1 is stored in a table and has all the values that should be selected in ParamCountry and ParamState.  In other words, it should tell these two subsequent parameters,
    what values should be selected in their respective dropdowns.  For example if the user selects Selection1 from ParamUserSelection, it reads the values in the database table and if it finds US and Canada for countries and CA, NY, ON for states, ParamCountry
    should be populated with all the countries available in the database but should have ONLY US and Canada as selected values and ParamState should be populated with all the states in the database but should have ONLY CA, NY and ON as selected values.
    If then I click on selection 2 and it has ParamCountry = US, ParamState = TX,OH in its database then again all countries and states should be in the dropdown but only US for ParamCountry and TX,OH for ParamState should be selected.
    Is this possible with SSRS?  I've tried using the Default Values tab with a dataset that returns all the selected values under Report Parameters Properties but this only works for the first time that I select ParamUserSelection.  It appears that
    if I change the value of ParamUserSelection again, the default values are not invoked.
    If this is possible, please tell me how to do this as I have been struggling for a day with it.

    Hi Comedian,
    According to your description, you have a report with three parameters (ParamUserSelection, ParamCountry, ParamState). The available value lists of ParamCountry and ParamState are based on the selection of a value for ParamUserSelection. Now you want to
    show all countries and states in their parameter dropdown list when selecting a user selection instead of only showing the cascading values. Right?
    In Reporting Service, when we want a parameter to show the cascading values, we only need to set the corresponding dataset and field for Default Values in this parameter. In this scenario, if we want to show all countries and states in their dropdown list,
    we just need to set another dataset for Available Values in those parameters so they can display all countries and states. We have tested your case in our local environment. Since you have done with the cascading parameters, we just give some part of steps
    and screenshots for your reference:
    We created two tables (dbo.Selection, dbo.states) based on your information.
    Create one more dataset (named dataset2) in your report, put text below into your query:
    select distinct Country from states
    Create another dataset (named dataset3), put text below into your query:
    select distinct State from states
    Go to your ParamCountry, in Available Values, select dataset2 and Country for dataset and field.
    Go to your ParamState, in Available Values, select dataset3 and State for dataset and field.
    Save and preview. It looks like below:
    Reference:
    Report Parameters (Report Builder and SSRS)
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou
      

  • Why does Preview automatically resize the text box to cut off the last character of added text? How do I fix it?

    Why does Preview automatically resize the text box to cut off the last character of added text? How do I fix it?
    I use the Tools > Annotate > Add Text feature, and when I click away after adding text, it automatically changes the text box size such that the last letter -- or last word -- gets bumped off into an invisible line below it, forcing me to manually adjust every single text box. It is highly annoying when trying to complete PDF forms (e.g. job applications).
    It appears to be a glitch, quite honestly, an error resulting from Apple's product design. Has it been fixed in the new operating system (for which they want $30)?
    I would very much appreciate any help you can provide! Thank you for your time.

    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • Hyperlinking text in form fields

    I'm using Acrobat 9 Pro and filling out a form that was supplied to me in PDF format. I don't say anyway to hyperlink words (in form fields) in Acrobat Pro. Is it not possible?

    Yes, you can do that if you set up the text field to allow Rich Text formatting. To create a hyperlink, select some text, right-click, and select "Hyperlink".

  • Selection screen text not appearing in other than engllish language .

    Hello All,
                On selction screen I have 3 select-option and 2 radio button for that I have the  selection text maintain in 'Selection Text".
                When I login to system using French language then on selection screen only select options text  is appearing in French language and Radio buttons text is not appearing in French language, it appearing in English  language. In the program where I have maintain the selction text one column is there name as  "Dictionary Object" which has the check box. In that, for select options check box is check in Dictionary object but for Radio button that check box is in disable mode.
                 So how can Radio buttons text is appearing in French language when login through french language.

    You've two options.  One, log in in French and maintain the texts for the radio buttons directly.  Two, use tx SE63 to maintain the texts for the radio buttons in French.
    The select-options are automatically translated because their texts come from the data dictionary, and (as presumably they're SAP standard types), they're already translated as part of the French language pack.  But the radio-buttons you have to do yourself.
    matt

  • Losing written text when screen rotates

    Several times now I have composed an email....when I inadvertantly turned my Ipad, causing the screen to turn, all of the written text disappeared. I'd appreciate any input, thoughts, or direction.
    Thank you

    Are you sure that you are not hitting the undo key on the keyboard or accidentally selecting the text and deleting it? I know that sounds far fetched but I have seen crazier things happen.
    If you are sure that you are not causing this to occur, reboot your iPad and see if that makes this issue disappear.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • How to set FIX based on selection made in planning form (HP 9.2)

    Hello,
    In order to calculate new values in my business rule I have to use CREATENONMISSINGBLK ON option. But it takes too long time to complete the calculation. So, I need to set FIXes in my business rule in order to keep database selection as small as possible.
    Is there any possibility to pass page selections prom planning data form to my custom business rule?
    For example form:
    Columns: Period
    Rows: Account
    Page: Year, Entity, Version, CustomDimension
    In my rule a need to set following fixes:
    Account: Custom fixed List
    Period: Custom fixed List
    Year: Custom fixed List
    Entity: Get one values selected in data form
    Version: Get one values selected in data form
    CustomDimension Get one values selected in data form
    OR
    is it possible to set default values for Run-time prompts to be equal to selected members in page dimensions?
    Thanks.
    Message was edited by:
    MaxDyug

    Hi,
    You can set up variables in your business rules so for example,
    Create Variable rtVersion, set it as Type member and dimension Version and Usage-Type as "Run-Time Prompt".
    Then in your business rule code you refer to the variable using [rtVersion]
    Now in planning the design of the form when you choose the properites for the business rule make sure "Use Members on Data Form" is ticked, and run on save.
    Now when the form is saved a pop up window will appear passes the selected version member into the run time prompt text box, this will then be passed into your business when submitted.
    You can also hide prompts if you want it be sent directly into the business rule without any user intervention.
    Hope this helps.
    Cheers
    John

  • Pre-written text not appearing

    When I'd like to make a new search or change a web page's address for example, clicking on the search bar or text input location takes me to where i can write or input my own text (onscreen keyboard) but the pre-written text or previous search isn't shown there, this means that whatever i type with the stylus or keyboard is just put after what's already there when i go back.
    Example: Site i'm visiting - 'Google.com'
    If i want to change this to something else i click on the address bar but instead of showing 'Google.com' so i can erase it and write something else it shows nothing so if i then write 'Gmail.com' and go back what will be shown is 'Google.comgmail.com.
    Any ideas on how this happened or how to fix it?
    == Extensions installed: ==
    you tube enabler
    hold4tab
    clipboard
    tabs utility
    shareaholic

    Well the shenanigans continue... i've disabled everything however what it does now is when i open up a search/input field to key in something with the stylus / screen keyboard it automatically has the last text i copied pasted there by default irrelevant of what was already in the search field. Also tapping on the search field in the browser frequently just zooms in and opens up a box at the bottom with the options next/prev which allows me to tab between elements (eg: search field - search button - next line - link) There's no obvious rhyme or reason to it. I'm thinking about uninstalling as it's practically unusable under these conditions.
    Any help would be appreciated. Thanks for your reply.

  • Automatically select entire words in Mavericks?

    In Word 2011 there is the option to "automatically select entire word[s]." Does anyone know if there is a way to enable a similar option for the entirety of text selection in Mavericks?
    Thanks!
    N

    You can double-click and drag (hold down on the second click) to select entire words at a time. Or if you prefer selecting using the keyboard, hold down shift+option while tapping the left or right arrow keys.

Maybe you are looking for