E66 bluetooth and car connection failed

Hi All,
Please help if anyone knows the answer. I have an E66 purchased in Dubai and I live in Dubai. I tried connecting its bluetooth with my car, Volvo XC60. It gets connected and soon disconnects. A friend of mine advised me to remove all contacts in the phone and pair the device with the car and disable the contact synchronization in the car. It is not working at all. How can I succesfully connect the phone to the car. Appreciate your kind support.

iPhone Support:
Hands-Free Profile (HFP)
Headset Profile (HSP)
iPhone Does Not Support:
Advanced Audio Distribution Profile (A2DP)
Audio/Video Remote Control Profile (AVRCP)
Basic Imaging Profile (BIP)
Basic Printing Profile (BPP)
Cordless Telephony Profile (CTP)
Device ID Profile (DID)
Dial-up Networking Profile (DUN)
Fax Profile (FAX)
File Transfer Profile (FTP)
General Audio/Video Distribution Profile (GAVDP)
Generic Access Profile (GAP)
Generic Object Exchange Profile (GOEP)
Human Interface Device Profile (HID)
Intercom Profile (ICP)
Object Push Profile (OPP)
Personal Area Networking Profile (PAN)
Phone Book Access Profile (PBAP)
Serial Port Profile (SPP)
Service Discovery Application Profile (SDAP)
SIM Access Profile (SAP,SIM)
Synchronisation Profile (synch)
Video Distribution Profile (vdp)
Wireless Application Protocol Bearer (WAPB)

Similar Messages

  • Bluetooth and Car Connection

    I've conected by phone to my car via bluetooth, on previous phones when this is done the phone book is also transfered but with the iPhone it's blank, a) am I doing something wrong b) is this not possible with an iPhone. Thanks

    iPhone Support:
    Hands-Free Profile (HFP)
    Headset Profile (HSP)
    iPhone Does Not Support:
    Advanced Audio Distribution Profile (A2DP)
    Audio/Video Remote Control Profile (AVRCP)
    Basic Imaging Profile (BIP)
    Basic Printing Profile (BPP)
    Cordless Telephony Profile (CTP)
    Device ID Profile (DID)
    Dial-up Networking Profile (DUN)
    Fax Profile (FAX)
    File Transfer Profile (FTP)
    General Audio/Video Distribution Profile (GAVDP)
    Generic Access Profile (GAP)
    Generic Object Exchange Profile (GOEP)
    Human Interface Device Profile (HID)
    Intercom Profile (ICP)
    Object Push Profile (OPP)
    Personal Area Networking Profile (PAN)
    Phone Book Access Profile (PBAP)
    Serial Port Profile (SPP)
    Service Discovery Application Profile (SDAP)
    SIM Access Profile (SAP,SIM)
    Synchronisation Profile (synch)
    Video Distribution Profile (vdp)
    Wireless Application Protocol Bearer (WAPB)

  • I cannot install Adobe Flash Player.  I have windows 7 64bit and firefox browser.  During install i get a message 'lost connection', followed by 'trying to reconnect', and then connection failed

    I cannot install Adobe Flash Player. I have windows 7 64bit and firefox browser. During install i get a message 'lost connection', followed by 'trying to reconnect', and then connection failed

    Many thanks for this!   I managed to install the Flash Player with this successfully after many failed attempts before.
    Thanks again
    Jason Pearlson
          From: Jeromie Clark <[email protected]>
    To: Jason Pearlson <[email protected]>
    Sent: Wednesday, March 25, 2015 10:46 PM
    Subject:  I cannot install Adobe Flash Player.  I have windows 7 64bit and firefox browser.  During install i get a message 'lost connection', followed by 'trying to reconnect', and then connection failed
    I cannot install Adobe Flash Player.  I have windows 7 64bit and firefox browser.  During install i get a message 'lost connection', followed by 'trying to reconnect', and then connection failed
    created by Jeromie Clark in Installing Flash Player - View the full discussionPlease use the offline installer Internet Explorer: http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_ax.exe Firefox and other NPAPI browsers: http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player.exe If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7349939#7349939 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7349939#7349939 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Installing Flash Player by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • HT4157 I am trying to use my cellular data on iPad and states connection failed. What do I need to do?

    I am trying to use cellular data and states connection failed. What do I need to do to fix this?
    Thanks

    Hi there April3939,
    You may find the troubleshooting steps in the article below helpful.
    iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection
    http://support.apple.com/kb/TS4249
    -Griff W. 

  • How do you in xcode search devices in bluetooth and stablish connection other devices with iphone or ipad

    hi everyone
    how do you in xcode search devices in bluetooth and stablish connection other devices whit iphone or ipad ?
    the all answer is good
    and the source is enable for all

    Bluetooth on iOS has three different functions:
    o user level features -- For example, headsets.  There is no developer opportunity here (well, you can play audio that comes out the headset, but you know what I mean :-).
    o networking -- You can establish a PAN network to other iPhone OS devices with GameKit (going away)  or Bonjour.
    o accessories -- All Bluetooth accessory developers must go through the Made for iPod program.  Once you have an MFI device you can then talk to it through ExternalAccessory framework.
    <http://developer.apple.com/ipod/>

  • All of a sudden my personal hot spot isn't working. It only comes up with Bluetooth and USB connection options. Why would that be?

    All of a sudden my personal hot spot isn't working. It only comes up with Bluetooth and USB connection options. Why would that be?

    No I can not turn on the wifi either. I can get on the web on my phone and Facebook etc on phone but no wifi or hotspot

  • Since upgrading to iOS 5.1.1 docks and car connection stopped working

    Since I upgraded my iPhone last night, my iHome dock, Philips dock and BMW car connection are failing.  When connecting the phone to the docks I get a "This accessory not supported" message on the phone and when I hook it up in the car the car display plays music but is stuck on displaying only the name of the first song and doesn't change when moving from one song to another.

    Exactly the same.  Upgraded to 5.1.1.  Now docking port on BMW X5 2009 has stopped working completely...flashes back and forth on the screen "audio accessory connected" to the album covers, 1-2 times per second.  Absolutely no music. The car no longer sees the phone.  Bluetooth voicecalls work fine.
    Also, "accessory not supported" flashes constantly on my Bose stero dock.  If I repeatedly plug in the phone I can get it to work 1/2 the time.
    iphone that can't play music......great.  How was this missed on QA? 
    Anyone know Tim Cook's email??

  • Siri over bluetooth and car sterio

    I have a 4s and when connected to Bluetooth in my car siri is worse than useless it can not understand a work I say and as this was advertised as working on the tv you would expect it to work but it dose not even come close
    My stereo is a Sony XPLOD MEX-BT3800U and it is made for iPhone, it works fine with the previous voice recognition. I have tried it with several other BT devices and the results varied but the variation was only how spectacularly the failed so I can only conclude it dose not work with bluetooth properly.
    It's a shame as this is why I bought the handset as I was told in the apple store that it would work.
    Onto the second point I can't get my battery to last more that 12-16 hours before fully flat. What am I meant to do about this as I can't see it as accaptable
    Gavin

    I'm not sure what version of Bluetooth is in the system. I'll have to check and see if I can find out. I do know that there is an external noise canceling mic in the headliner on the drivers side. Came from the factory that way. I can see how a mic in the head unit itself might be less effective.
    I do know that Apple has aknowledged that 5.0.1. did not fix all the battery life issues and they are still investigating. My money is still on a process that's being allowed to run rampant and bring things down. I didn't have much of a problem with my 4S when I got it, though it was obvious it was burning battery faster. not the drastic problem some people reported and of course I have to take into account that standby time on the 4S is only 200 hours compared to 300 for the 4. I had no problems on my 4 after updating to 5.0. My wife is using the 4 now an has not had any problem either. I honestly can't say whther the marginal improvement I've seen in my 4S is due to 5.0.1, battery conditioning from a couple weeks of use, or me not playing with it so heavily since it's not 'my new toy' any more.

  • Major regression with Bluetooth and car: Total crash of the Pre!

    HI!
    I have a german GSM Pre and Bluetooth car connection worked fine with my 2007 Audi TT when I had webOS 1.1.3.
    Now, after the update to 1.3.1, I can still connect to my car, but suddenly during driving, the Pre went completely dead. I was not on a call or anything, it just happened. I had to remove the battery to revive it.
    Apparently, I am not the only one experiencing this, as I have read in another forum.
    Thomas
    Post relates to: None

    If you're seeing " “POSIX error: Invalid argument” (NSPOSIXErrorDomain:22)"
    you will see this if you have safari caching disabled... safari enhancer is prone to disabling this, w/o being asked to.
    Take a look at home/library/caches/safari Do a get-info on the folder & see if it's locked. If it is, un-check the 'locked" box & try the site again.
    It's a 100% repeatable problem for me, with your site & any other webpage uploads.

  • Nokia Lumia 1520 - Bluetooth and Data Connectivity...

    Hi - i recently updated my Nokia lumia 1520 with a new firmware that Nokia tool told me being available.  after that i have consistantly having bluetooth connectivity issues and Data connectivity issues.
    i have a Jabra Clipper bluetooth headset which .  i am no longer able to pair it. it detect and says jabra clipper, then starts pairing, then simply says couldn't connect.
    if i have wifi on, if i go out of range of the WIFI signal, my data connection stops working as well.  this is 100% of the time.  i have to reboot my phone to get data connectivity back.
    Its on Lumia Cyan
    manufacturer name: RM-937-im_mea3_1019
    core build id: 7030.80
    bsp release: 2061.0066
    applicatoin versoin: 3.11.2.1
    build creation date: 7/8/2014
    from Nokia software recovery tool:
    Product Code: 059V479
    Software Version: 02061.00066.14253.40002

    Because I am just an end-user like you and I do not have your hardware combination here, I can only give general advice. Could be a new interoperability issue between these two devices, introduced with Lumia Cyan. Could be a old wrong pair-key. Or could be interfering between your Bluetooth and Wi-Fi (Bluetooth Adaptive Channel Hopping). Therefore, let us start with the Bluetooth part:
    on the Nokia Lumia 1520, Settings » Wi-Fi » Off (to avoid any interference)
    on the Nokia Lumia 1520, Settings » Bluetooth » On
    (status: paired) tap and hold your Jabra CLIPPER » delete (if paired already)
    on the Jabra CLIPPER, press and hold the multi-function button until the indicator light is solid blue (approximately 6 seconds) to activate the paring mode
    Your Bluetooth headset should appear in your phone now. After you tapped on it, it should be paired successfully. Does it?
    If not, start over again and between step 1 and 2, power off both Jabra CLIPPER and Nokia Lumia 1520.
    If it still does not work, start over and between step 1 and 2, please hold volume down + power until the Nokia Lumia 1520 turns off (soft reboot; do not forget to set your date/time afterwards).
    If it still does not work, start over and between step 1 and 2, turn off your Wi-Fi access point.
    Does it work now?

  • JEditorPane and Secure Connection failed

    Hello,
    I have created a simple application that shows the resulting HTML page from a URL connection using JEditorPane. This works fine except when I try to connect to a URL that needs a user name and password.
    Using a straing URL connection I am able to connect but when I try to use the JEditorPane there is no method, as far as I know to get the connection and pass it to the EditorPane to use. I have tried the following :
    context is with in a class that Extends the JEditorPane:
    setContentType("text/html");
    InputStream is = getSecureInputStream(username,password,tmpStr); // returns an input stream from
    // a URL connection
    HTMLDocument doc = (HTMLDocument)getDocument();
    this.read(is,doc); // try to get the JEditorPane to
    // read from the input stream
    I get the following error:
    error:Must insert new content into body element-
    java.lang.RuntimeException: Must insert new content into body element-
    at javax.swing.text.html.HTMLDocument$HTMLReader.generateEndsSpecsForMidInsert(HTMLDocument.java:1878)
    at javax.swing.text.html.HTMLDocument$HTMLReader.<init>(HTMLDocument.java:1854)
    at javax.swing.text.html.HTMLDocument$HTMLReader.<init>(HTMLDocument.java:1729)
    at javax.swing.text.html.HTMLDocument$HTMLReader.<init>(HTMLDocument.java:1724)
    at javax.swing.text.html.HTMLDocument.getReader(HTMLDocument.java:125)
    at javax.swing.text.html.HTMLEditorKit.read(HTMLEditorKit.java:228)
    at javax.swing.JEditorPane.read(JEditorPane.java:504)
    at javax.swing.JEditorPane.read(JEditorPane.java:478)
    at com.UrlChecker.EditorPane._$10273(EditorPane.java:98)
    Thank you

    i can't find how to fix in the See Secure Connection Failed page, that's why i post my question.someone helps me pls!!!

  • No dial-tone / connecting beeps and outgoing connection fails (android)

    Hi Skype, Since the last update (week 31, 2015) I get no dialtone or connecting beeps and outgoing calls fail. HTC one X+, HTC Sense 5.41, Android 4.2.2, Skype version 5.7.0.13054 on WiFi

    OK I've now got fault reported using online system. It says :
    There is an open fault on this line
    Fault status
    We are unable to give you an update on your fault at this time. Please try again within 2 hours for an update, or alternatively contact us on 0800 800 151 if you would like further information.
    Results of fault diagnosis
    We cannot detect a problem with this line.
    It may be caused by a faulty phone or equipment.
     I take it BT will be in touch with me in due course?

  • HT4623 how can i fix the problem on ios 6.1.3 in my bluetooth and wifi connection?

    how can i fix the problem on mi ipad mini. When i updated the ios to 6.1.3 the bluetooth and wifi didn't work properly.

    Hey maricel737
    There are two different articles that go over troubleshooting steps for solving issues with Wi-Fi and Bluetooth. This first one goes over Wi-Fi on your iPad:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    This next one outlines suggestions for Bluetooth on your iPad:
    iOS: Third-party Bluetooth headsets, headphones, and keyboards
    http://support.apple.com/kb/ht1664
    On the Bluetooth one, I'd just skip ahead to the "Additional Information" section where the troubleshooting steps start.
    Best,
    David

  • Bluetooth and iPod connections in car

    I have an Acura TSX, which I did pair with an iPhone at the store with no problems. My question is, how does it work with the auxilary input? Will the car stereo play the iPod, if the iPhone is paired with the car? and will the audio stop when a call comes in as the radio or a CD does?
    thanks!!

    Read this thread
    http://discussions.apple.com/thread.jspa?messageID=5765536&#5765536

  • 6210 Navigator, Bluetooth and car stereo

    Hi there! I just got myself a Nokia 6210 Navigator, and i want to connect it with my car stereo for bluetooth use. I did so with my SonyEricsson T630 with great success. But when i try now, i follow the exact same steps as before, but it does not work. I do get the setup to finish, but when it tries to connect, it just disconnects after about 0.5 seconds. Ive tried several times, and i have deleted the paired phone and everything, but nothing seems to work. I can have 3 phones paired, so that should not be the problem.
    The car stereo is a Pioneer DEH-P700BT.
    Thanks for all help, and feel free to ask if you need some extra info. Thanks!

    I have the 6210 Nav, the only way I can get it to connect is by going through the set up, then letting it link to BT Audioo first, once it sees that, I can select a different source and hey presto!
    But still not good enough!

Maybe you are looking for