E66 camera, "Unexpected error occured. Power off t...

Hi,
I purchased my E66 a week ago and there is this problem that is really annoying me, whenever I try using the camera for the second time (i.e. after taking a picture then turning the camera off) the error pops that "Unexpected error occured. Power off the device and restart". I think I've restarted it thousands of time but the problem is never solved. Can anyone kindly guide me through this problem and a solution for it? I'll be very obliged. Thanks

1. backup everything in your memory card to your pc
2. backup your phone memory to your memory card
3. reset/format your phone
4. try if the camera works
5.
a) either setup your phone settings and programs again
b) or restore your backup from the memory card to your phone
6. check to see if the cam works now
for backing up the phone to the memory card, go to the "memory" program in the tools, and press the options to see the backup phone line.
Good luck...
And do not hesitate to ask further
For the reset / format part I copied the following from the web. I never tried the 3rd one. My personal choice is the 2nd. If anyone has an idea I'd love to hear as well..
*#7780# - Reset to the original settings; some informations are also deleted and need to be re-entered.
*#7370# - Soft format - this will resets all the phone memory (like re-format a disk); make sure to have full battery charged !
[dial] + [3] + [*] during a power on performs a hard format : this will return the phone like you have received; make sure to have full battery charged !
Message Edited by sodalimon on 23-Aug-2008 03:39 PM

Similar Messages

N95 front camera : Unexpected error occurred. Powe...

When I try to use my N95 front camera it just says "Unexpected error occurred. Power off the device and restart."
I tried everything. Updated the firmware, replaced the flex cable and the front camera, restarted the phone, etc. and nothing happened.
Can someone help me ?

gdegas001, I'm inclined to your suggestion.
I'm not using the N95, but my N82 is spitting the same error message.
I think I have the latest firmware V31.0.016 (not sure if this is latest or not).
I have also done *#7370# follow by 12345 to reset the phone.
I have also changed the following: from silver to black to gold and now back to black housing! Of course in doing that, I've changed several keypad flexes.
Ok I'll cut to the chase, I think I've demaged the flash (or it's flex) after changing the facet 4 times!
It is on my latest N82 face change that I received the "Unexpected error...". And of course it is the first time I notice the blinking flash battery (in the manual, this means the flash is charging!). Now it is ok if the flash is charging after it fired a few times, but a blinking flash indicator followed by the "Unexpected error.." is likely to mean that the flash is not charging or dead.
I'm going to buy the flash unit (about $30 on eBay) for replacement and see if my (or your's) suspicion is correct. Will update you all soon.
Of course the "Unexpected error.." can mean many things, the flash issue is just one of them. So don't even think about changing the flash unless you always see the blinking flash indicator first. Another reason for getting the "Unexpected error..." is if you have changed your housing for your phone at least 3 times, by yourself!

Nokia N8 camera "Unexpected error occurred"

Hello
I am having a problem on my Nokia N8's camera. I take pictures but when I'm going to take video it is showing "Unexpected error occurred. Please restart the camera. If this does not help, try restarting the Phone." and black screen. Restarting the phone did not worked for me. Also and *#7370# reset.
Any sugestions to solve the problem??
Solved!
Go to Solution.

Restarting the camera should have helped. I also get these kind of messages on my phones too, but Restarting the camera or rebooting the phone helps solve the problem.
Also you have tried resetting device by *#7370# i would suggest you to reinstall the firmware via Nokia Suite. Check if that helps.
If nothing works then you are done with every possible thing before going to Nokia Care Point. I might not suggest the hard reset as you can lose built-in apps for which you ultimately have to visit NCP unless you are smart enough
THANK YOU
If this post was useful, click the white star.
Nokia 808 with Belle FP2 (113.010.1506)
Type RM-807
Product code 059p7z2

Unexpected Error Occurred (error code -600) after Leopard Installation

Installed Leopard for the second time.
Everything seems to work fine, but after opening and then closing Mail, I'm unable to open it via the dock. Tried to open by selecting from the applications menu, and get the following message:
The operation could not be completed.
An unexpected error occurred (error code -600)
Same thing with Backup, Parallels too.
Shutdown behavior is odd. From the apple icon, shutdown doesn't work, everything goes away on the desktop, then the spinning wheel (not beach ball), then nothing. Have to power off to quit, can't be good for the hardware.
Any suggestions, or am I doomed to a clean install and reinstalling all of my applications? Thankfully I have a drive backed up with SuperDuper with 10.4!
Thanks for the help.

OK, I've got ContentBarrier X4 installed and this was the cause of my error codes and it looks like several - if not all of my installation issues with Leopard.
Apparently, perhaps with Login KeyChain update, it wiped out the ContentBarrier administration name, and on launch, it was likely blocking the applications.
First, install the Login KeyChain update (see Apple software download page).
Reinstalled ContentBarrierX4 http://www.intego.com/services/updates.asp (make sure to select ContentBarrierX4).
Open ContentBarrierX4 - you'll have to sign in as the administer. You may have to go into Preferences > Accounts > to make sure that you've got admin rights.
Once you logged in, exit, then reboot.
For the first time since installing Leopard, I can shutdown without a hard power off.
Salvation...

X220 - unexpected error occurred (rc=9)

Hi All,
Just received 2 new X220 thinkpads - I'm attempting to burn factory recovery disks on a lenovo USB multifunction cd/dvd drive.
I receive the 'error unexpected error occurred (rc=9)' when attempting to burn the disks - I came across another forum suggesting that the first disk is a CD and the rest should be DVD - This worked to burn the recovery media - however when I inserted a DVD to continue the rest of the recovery media I receive the afore mentioned error.
I have gotten 1 of them to complete a full set of disks - 4 in total. The other one, no such luck.
Anyone else out there having similar issues?
- Chad
Solved!
Go to Solution.

Hello Guys
Seems to be I have found solution after I noticed that my usb cd-rom always lost connection with computer just before finalizing disc. So all what i did ... i just plug additional power from USB to my ICY BOX (it can work without adding power to it) and after all i was able to finish creating my Recovery Media. Hopefully it will helps. It does for me good luck.

802.11ac TC setup: "An unexpected error occurred. Try again."

I am attempting to replace an older 2TB 802.11n Time Capsule that was working fine with a new 3TB 802.11ac Time Capsule. I have followed the instructions, setting up the new TC just as the old one was set up. However, all I can manage is to get this error message: “An unexpected error occurred. Try again.” I have tried more than a dozen times, including various configurations, to no avail. I have returned to using my old TC until I can resolve this issue. I am using a Motorola SurfBoard SB6141 cable modem. Please advise. Thank you.

Power off the modem completely by pulling the power cable from the back of the device, or from the wall AC jack. Leave it off for at least 30 minutes....longer would be better.
“An unexpected error occurred. Try again.”
This is a common message in Yosemite due to glaring bugs in the networking software. Please try the following....which may help...and may not.
On your Mac....open System Preferences (gear icon on the dock)
Open Network
Click on WiFi on the left to highlight it
Click Advanced at the lower right
Click the TCP/IP tab
Make sure that the setting for Configure IPv6 is set to Link Local Only
Click OK
Click Apply
Repeat the same sequence as above, except this time click on Ethernet and follow the same steps all the way through
Restart the Mac
Power up the new Time Capsule for a minute or two
Hold in the reset button for 8-10 seconds and release
Allow a full minute for the Time Capsule to restart to a slow, blinking amber light.
Power off the Time Capsule
After the modem power down period, connect the Ethernet cable from the modem to the WAN "O" port on the Time Capsule
Power up the modem, and let it run at least 10 minutes
Power up the Time Capsule and let it run 2-3 minutes
Click the AirPort icon at the top of the screen and look for a setting of New AirPort Base Station
Just below that, click on Time Capsule
The setup utility will open up and analyze the settings, then suggest that the Time Capsule be configured to create a new network.
Follow the prompts. You can use the same wireless network name that you used before and the same password if you wish.
Be sure to assign a new device name to the Time Capsule....something simple. For example, mine is TC. Do not use the name that Apple suggests.
I would not recommend that you try to use the option in AirPort Setup to have the new Time Capsule replace the old Time Capsule.
No guarantees, but you have our best shot based on experience. Good luck!
If you continue to receive the "unexpected error" message, we can try the setup on an iPhone or iPad, which ofter works better than a Mac. Otherwise, please contact Apple Support, as there is nothing more that we can do.

Airport TC 2TB after following all Setup instructions. Error message "an unexpected error occurred try again"

After following setup guide my Airport TC 2TB will not get past the amber flashing light. Message is "an unexpected error occurred. pllease try again."
my cable modem allows me to connect to internet
my Airport allows me to connect to the internet while it is searching and preparing my network. When I cancel out after the error message above I lose internet connectivity.
Any help would be appreciated.
louis

Completely isolate the Mac and the TC from the network.. plug the TC lan port by ethernet to the Mac.
Factory reset the TC.
Factory reset TC Gen 5 or AE Gen 6
Unplug your AE/TC .. hold in reset and power the TC/AE back on.. without releasing the reset.. wait until status led flashes rapidly.
Make sure in the ethernet settings you have ipv6 set to link local and the dhcp set for ip. It should give you an address of 10.0.1.2
Open the airport utility, using the top menu.. File, Configure Other.
Type in the address, 10.0.1.1 .. no password is required at this stage.
Click ok and the main setup will open.
Set all the names short, no spaces and pure alphanumeric.
Set the TC to the right mode .. dhcp+nat for router or off (bridge mode) for bridge.
Set wireless to create a wireless network.
No luck then the TC is faulty and needs to be returned.

2TB Time Capsule getting "An unexpected error occurred. Try again" error after a hard reset

Hi,
I'm working with a brand new 2TB Airport Time Capsule and after I performed a Hard reset as expalined in the forums I'm not able to configure it any more. I receive "An unexpected error occurred. Try again" from the AirPort Utility.
I'm running Mavericks in my Mac and I'm not sure what else to do. Any suggestions?

Completely isolate the Mac and the TC from the network.. plug the TC lan port by ethernet to the Mac.
Factory reset the TC.
Factory reset TC Gen 5 or AE Gen 6
Unplug your AE/TC .. hold in reset and power the TC/AE back on.. without releasing the reset.. wait until status led flashes rapidly.
Make sure in the ethernet settings you have ipv6 set to link local and the dhcp set for ip. It should give you an address of 10.0.1.2
Open the airport utility, using the top menu.. File, Configure Other.
Type in the address, 10.0.1.1 .. no password is required at this stage.
Click ok and the main setup will open.
Set all the names short, no spaces and pure alphanumeric.
Set the TC to the right mode .. dhcp+nat for router or off (bridge mode) for bridge.
Set wireless to create a wireless network.
No luck then the TC is faulty and needs to be returned.

The operation can't be completed because an unexpected error occurred (error code -8060).

Hi,
I want to copy a folder from desktop to my document (or anywhere else on a MAC) I got this error "The operation can’t be completed because an unexpected error occurred (error code -8060)." everytime at the same position when it's about to finish (sth like 75%).
I have MBPR + Mountain Lion and the folder is a Xcode project if it helps.
BTW there is nothing in trash.
Thanks

Thanks but I solved this problem with this tip:
tba55
Re: Error when trying to copy one of my folders, or compress it in the finder
Aug 11, 2012 12:41 PM (in response to Maziyar)
I found some subdirectories within my Project folder that were complete duplicates of other directories. After deleting those, I no longer had the error. I don't know where they came from, but think they may have been created after an upgrade, say from Xcode 3.0 to 4.0 but don't remember. Anyway, don't know any more about it, only that it went away after I deleted those duplicate subfolders. Good luck !
I found unlimited folder in folder in my Xcode project folder that made the size from 285MB to 1.5G. It was that duplicate folders made this error.
I removed and it solved the problem.
Thanks

I get this message "The operation can't be completed because an unexpected error occurred (error code -50)" when I try and add any files to my Time Capsule

I get this message "The operation can’t be completed because an unexpected error occurred (error code -50)" when I try and add or delete any files to my Time Capsule. It just started happening a week ago.

I would get an external drive today and copy all your stuff off the TC.. forget trying to load more onto it. There is a good chance after 3years (A 2TB should be only about 2years tops), the disk or the TC itself is on the way out. Do it immediately. If TM is also failing to backup you need to recognise symtoms of impending doom.
Unfortunately the error messages are archane and it is hard to discover their meaning.
You also cannot verify a network drive.. you can verify the TM sparsebundle though so do that.
A5. http://pondini.org/TM/Troubleshooting.html
Reboot the whole network from off.. certainly if you run later OS it can simply lose the drive..
If you still fail to be able to copy to the TC.. then get that external and copy off it. Tell us if you can do that.

I keep on getting this error when i try to copy files to my 2T Time Capsule, Please help im running out of space on my MacBook Pro.... The operation can't be completed because an unexpected error occurred (error code -50)

I keep on getting this error when i try to copy files to my 2T Time Capsule, Please help im running out of space on my MacBook Pro....
The operation can’t be completed because an unexpected error occurred (error code -50)

I would get an external drive today and copy all your stuff off the TC.. forget trying to load more onto it. There is a good chance after 3years (A 2TB should be only about 2years tops), the disk or the TC itself is on the way out. Do it immediately. If TM is also failing to backup you need to recognise symtoms of impending doom.
Unfortunately the error messages are archane and it is hard to discover their meaning.
You also cannot verify a network drive.. you can verify the TM sparsebundle though so do that.
A5. http://pondini.org/TM/Troubleshooting.html
Reboot the whole network from off.. certainly if you run later OS it can simply lose the drive..
If you still fail to be able to copy to the TC.. then get that external and copy off it. Tell us if you can do that.

An unexpected error occurred in Report Processing. (rsInternalError)

Hi ,
An unexpected error occurred in Report Processing. (rsInternalError)
Get Online Help
The type initializer for 'Microsoft.ReportingServices.Library.RSLocalCacheManager' threw an exception.
The type initializer for 'Microsoft.ReportingServices.Diagnostics.MemoryAuditCollection' threw an exception.
Exception of type 'System.OutOfMemoryException' was thrown.
I get the above error message when i click to see the cube status on SSRS home page under admin reports .
probably all the TFS 2012 reports shows the same error message.
Please advice...
No space issue is seen for the Tfs report server DB or temp db.
Below is what i find in the reporting service Logs..
processing!ReportServer_0-78!179c!04/30/2014-09:41:07:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: , Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: An unexpected error occurred
in Report Processing. ---> System.TypeInitializationException: The type initializer for 'Microsoft.ReportingServices.Library.RSLocalCacheManager' threw an exception. ---> System.TypeInitializationException: The type initializer for 'Microsoft.ReportingServices.Diagnostics.MemoryAuditCollection'
threw an exception. ---> System.OutOfMemoryException: Exception of type 'System.OutOfMemoryException' was thrown.
at Microsoft.ReportingServices.Diagnostics.MemoryAuditCollection..cctor()
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.Diagnostics.MemoryAuditCollection.Register(MemoryAuditProxy map)
at Microsoft.ReportingServices.Library.RSLocalCacheManager..ctor()
at Microsoft.ReportingServices.Library.RSLocalCacheManager..cctor()
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.Library.SegmentCache.TryGetCache(Guid segmentId, Byte[]& buffer)
at Microsoft.ReportingServices.Library.CacheStorageLayer.Read(SegmentChunkDbInterface storage, ReadWriteParameters parameters, ReadWriteStatistics& statistics)
at Microsoft.ReportingServices.Library.SegmentedChunkStorage.Read(Int64 position, Byte[] buffer, Int32 offset, Int32 length)
at Microsoft.ReportingServices.Library.StorageStream.Read(Byte[] buffer, Int32 offset, Int32 count)
at Microsoft.ReportingServices.Library.BufferedReadWriteStream.FillBuffer(Int32& bytesRead)
at Microsoft.ReportingServices.Library.BufferedReadWriteStream.ReadByte()
at System.IO.BinaryReader.ReadByte()
An unexpected error occurred in Report Processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: An unexpected error occurred in Report Processing. ---> System.Exception: For more information about this
error navigate to the report server on the local server machine, or enable remote errors
at Microsoft.ReportingServices.Library.ReportingService2005Impl.GetProperties(String Item, Property[] Properties, ItemNamespaceEnum itemNamespace, Property[]& Values)
at Microsoft.ReportingServices.WebServer.ReportingService2010.GetProperties(String ItemPath, Property[] Properties, Property[]& Values)
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
Thanks,
Manish

Hi,
1. Are you using the NLB? If possible, please turn off the NLB temporally to see whether the is gone.
2. Try to enlarge the execution timeout value in the web.config.
a. Backup the web.config first. Then, open the web.config from the report server folder, located at c:\Program Files\Microsoft SQL Server\MSRS11.<instance name>\Reporting Services\ReportServer\ by default.
b. Find out the following line in the file.
<httpRuntime executionTimeout="9000" />
c. Modify the attribute value from 9000 to 36000. Save the web.config file and restart the reporting service.
3. Restart the reporting service and then you need reproduce this issue, and collect the new reporting service logs.
Thanks.
Tracy Cai
TechNet Community Support

"AN UNEXPECTED ERROR OCCURED (ERROR CODE -600)" HELP...

I was trying to open a FC EXPRESS HD and this message came up:
"THE OPERATION COULD NOT BE COMPLETED"
"An Unexpected Error Occured -ERROR CODE -600-.
If someone can help me. I'll appreciate.

It appears that the last time Final Cut Express was used, it didn't completely quit. Open the Activity Monitor in the /Applications/Utilities/ folder to force quit it if it shows up; if it doesn't, save your open documents in other applications and quit the loginwindow process. You may now be asked to log in again or be logged in automatically depending on how the computer is set.
(24809)

Music services failed to load an unexpected error occurred

Hi!
Till the last Day, the WiFi and/ore the USB-Sync with iTunes runs perfectly.
But at this moment, it doens't work anymore and i got this message on my DM6 "Music services failed to load an unexpected error occurred"
I don't know why, cause i didn't change anything on my DM6, iTunes ore Torch.
This ist my Desktop.log
13:05:54.907|INFO |12|Rim.Desktop.Media|39001|Got Request POST http://192.168.2.105:4481/mediasync/music/17afe97cfe9d52d6
13:05:54.910|INFO |12|Rim.Desktop.Media|39001|gzip requested
13:05:54.992|FATAL|12|Rim.Desktop.Shell|0|Fatal Application Error
System.FormatException: The input yields a number greater than 4 bytes.
   bei Rim.Common.Utilities.JavaBinaryReader.ReadCompressedInt()
   bei Rim.Media.Sync.SyncProviders.Device.Destination.DeviceChanges.ReadChanges(Stream changeStream)
   bei Rim.Media.Sync.Listener.HttpMediaServer.OnUpdatesProvided(Object sender, UpdatesProvidedEventArgs e)
   bei Rim.Common.Utilities.Events.Eventer.Raise[THandlerArgs,TArgs](Object sender, EventHandler`1 handler, TArgs e)
   bei Rim.Media.Sync.Listener.MediaHttpListener.Request(IAsyncResult result)
   bei System.Net.LazyAsyncResult.Complete(IntPtr userToken)
   bei System.Net.LazyAsyncResult.ProtectedInvokeCallback(Object result, IntPtr userToken)
   bei System.Net.ListenerAsyncResult.WaitCallback(UInt32 errorCode, UInt32 numBytes, NativeOverlapped* nativeOverlapped)
   bei System.Threading._IOCompletionCallback.PerformIOCompletionCallback(UInt32 errorCode, UInt32 numBytes, NativeOverlapped* pOVERLAP)
13:05:54.994|FATAL|12|Exception|0|Fatal Error
System.FormatException: The input yields a number greater than 4 bytes.
   bei Rim.Common.Utilities.JavaBinaryReader.ReadCompressedInt()
   bei Rim.Media.Sync.SyncProviders.Device.Destination.DeviceChanges.ReadChanges(Stream changeStream)
   bei Rim.Media.Sync.Listener.HttpMediaServer.OnUpdatesProvided(Object sender, UpdatesProvidedEventArgs e)
   bei Rim.Common.Utilities.Events.Eventer.Raise[THandlerArgs,TArgs](Object sender, EventHandler`1 handler, TArgs e)
   bei Rim.Media.Sync.Listener.MediaHttpListener.Request(IAsyncResult result)
   bei System.Net.LazyAsyncResult.Complete(IntPtr userToken)
   bei System.Net.LazyAsyncResult.ProtectedInvokeCallback(Object result, IntPtr userToken)
   bei System.Net.ListenerAsyncResult.WaitCallback(UInt32 errorCode, UInt32 numBytes, NativeOverlapped* nativeOverlapped)
   bei System.Threading._IOCompletionCallback.PerformIOCompletionCallback(UInt32 errorCode, UInt32 numBytes, NativeOverlapped* pOVERLAP)
13:05:58.439|INFO |12|Rim.Desktop.Media|39001|HttpMediaServer status update: ServerOn
What can i do, to fix the problem?
Tank you!
Sorry for my bad english
Greetings from Germany
Kalorie99

I found the answer, here in the forum from a user:
Here is the solution that worked for me, based on antoniovtorres post (I resisted the urge to get PO'd and tried to figure out what he must have done):
With desktop manager closed, using Blackberry user tools, navigate to 'Blackberry\system\' (make sure that hidden files are shown or you won't see the 'system' folder).
Move or delete the folders 'Media Sync' and 'media' from the system directory.
Re-open desktop manager.
Click yes to any dialog that appears.
You should now be able to sync music again.
Note that your device may want to double up on your synced pictures and videos, so you may want to delete your pictures and videos off of the device before your next picture or video sync. Hope it works for y'all.
Scott
It works again!
Yeah!
BlackBerry rocks!

Printing Calendar:An unexpected error occurred. Please try again later.

I have been trying unsuccessfully for 3 days to print out a calendar from iphoto. I have done this every year for xmas gifts and this usually goes off without a hitch.
I click on buy calendar and it makes me login to my account (account works, I can still purchase via iTunes).
Once I confirm payment (and I have tried changing my payment method) and move past step 3 I get a pop up that says "An unexpected error occurs. Please try your again later"
I tried cards, individual photos and my old calendars. No orders will go thru.
Please help as I need this for xmas.

Let's give the old reliable remedy a try. This might work; if it doesn't, we can at least rule it out. Quit iPhoto and delete your iPhoto preferences. To do this, go to your username> library> preferences> com.apple.iphoto.plist. Delete this file. Then reopen iPhoto; it will create a new preference file with all of the default settings.
From your description, there is something in your Apple account that is at the root of the problem. Go to this site to be able to log into your account and make necessary changes. https://myinfo.apple.com/cgi-bin/WebObjects/MyInfo.woa
If needed, check out this link for more info on Apple ID's. http://www.info.apple.com/support/howtoid.html
I hope one of these solves your problem.

E66 camera, "Unexpected error occured. Power off t...

Similar Messages

Maybe you are looking for