E66 SMS Inbox List Style

The display style of Nokia E66 Inbox Message List as:
<PhoneNo/SenderName> <MessagePreview> <Date/Time>
The problem is, the columns are too narrow, 3-4 alphabat for <PhoneNo/SenderName>, it could not properly display the full name of sender. Look at the Inbox Message Lis, we can't tell who send SMS to us.
Another, the <MessagePreview> column also too narrow, It just be able to preview the word "The", again, it can't tell which topic of the SMS we received.
http://media.share.ovi.com/m1/large/0526/726814f03d2b465c81895fafb6aeda08.jpg
Any method to change the display style of Nokia E66 Inbox Message List? Like one in Nokia 6120a:
<PhoneNo/SenderName>
<MessagePreview>
There is no column, with 2 rows, clearly display the sender name, and message topic. This is good. Can E66 change to like this?
Solved!
Go to Solution.

try the following
Personalisation settingsSelect Menu > Tools > Settings > General >Personalisation.Display settingsTo turn the automatic display rotation on or off, selectDisplay > Display rotation.To select whether you want the image to change to full screenin the landscape mode, select Display > Turn to full view.To define the level of light that the device needs beforeswitching on the backlight, select Display > Light sensor.To change the text size, select Display > Font size.
or here this is probably what you need
Other settingsSelect Menu > Communic. > Messaging > Options >Settings > Other.Select from the following:• Save sent messages — Select whether to store sentmessages in the Sent folder.• Number of saved msgs. — Enter the number of sentmessages to save. When the limit is reached, the oldest
message is deleted.• Memory in use — Select where to save your messages.You can save messages to the memory card only if a
memory card is inserted.• Folder view — Define how you want the messages inInbox to be shown.
Message Edited by jimmyireland on 30-Dec-2009 07:50 PM
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

E72 unable to send SMS to list

I am unable to send/forward SMS to lists.
After list / contact selection, as soon as I hiss the send button, the Phone pops up the "SMS sending" screen.
The screen disappears after a few seconds and following are the things that had happened:
A draft is saved
Outbox is filled with SMS but non is sent
THIS IS REALLY ANNOYING
Another Thing:
Usually after this, my phone looses it mind and stops displaying
correct time with newly received SMS
contact Name with newly received SMS (in Inbox) (shortcut on main screen does show contact name)
Any Help !!!!
- Usman

That Did not help
I did the following:
1 - Synced contacts via Ovi
2 - deleted all contacts from Phone
3 - Synced again (lists were maintained)
4 - Sent an SMS to list (was sent - SUCCESS)
5 - sent another SMS to a larger list (was NOT sent - FAILURE)
A draft was saved and the outbox was populated with status "Waiting"

SMS inbox doesn't show new messages after upgrading to OS 5.0.0.681. SMS format appears as IM.

My SMS inbox doesnt show new messages and also my Curve 8900 doesnt prompt for any new messages. However, the Mobiso application (which logs calls, texts) shows messages coming in with its text lengths. I asked this to Blackberryhelp on Twitter but it said to contact service provider, but there is nothing wrong with it. The format of the SMS inbox should have something wrong otherwise the Mobiso application should not have logged all messages.
Please help me, i am missing all my daily SMS since last 20 days.
Will degrading the OS help? Which is recommended OS version for BB Curve 8900?

Hi,
Here are some good articles listing the available methods for organizing and displaying messages in device OS 5.0. If you can't set your exact preferences I suggest looking in AppWorld for custom programs.
Let us know how it goes!
Thanks,
Bifocals
What is new in BlackBerry Device Software 5.0
Option for separate SMS and Email message inboxes is missing
How to integrate SMS text messages with BlackBerry Messenger 5.0
SMS text messages received from multiple senders appear in the same conversation thread on the Black...
Organizing your inbox’s main Messages list
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Assigning a Hotkey to the SMS Inbox

I would like to assign a hotkey (the one with the envelope to be exact) to my SMS inbox. I would like to be able to reach the SMS inbox with one click, but apparently it is not possible. You can assign to "messages" in general but then its two more clicks to the inbox. I know that for a new SMS message an icon with direct link appears but this is not the point here. Is there any hack or maybe 3rd party app to achieve a direct link to the inbox? This question applies to all E series phones I think. Thanks.
E72-1, product code 0586718, firmware 022.007

Cindy Sarver (guest) wrote:
: : Lars Olsson (guest) wrote:
: : : Is it possible to assign a local name to the result
: : : of a complex and expensive subquery and have that
: : : name be used in multiple places in a where clause?
: : : select x,y from t where x in <S> and y in <S>;
: : : Here <S> is textually (very) large and quite
: : : expensive to evaluate.
: : : I have tried:
: : : select x,y from t where x,y in <S>
: : : The online manual seemed to indicate this (a list of
: : : column names before 'in') was OK and I hoped it would mean
: : : select x,y from t where both x and y in <S>
: : : However, the statement was rejected by 8i.
: : : Thanks,
: : : Lars
: Hi Lars,
: There are a couple of ways of doing it, but the easiest is
to
: do exactly what you wrote. I think if you put parentheses
around
: the columns, it should work:
: select x,y from t where (x, y) in
: (select col1, col2 from ...);
: (A really cheesy example that makes no sense, but shows that
you
: can select two columns is:
: select empno, deptno from emp
: where (deptno, deptno) in
: (select deptno, deptno from dept);
: If you want to get fancier, you may use a subquery in the
: FROM clause, also.
: I hope that this helps.
: -cindy
I like the previous ideas. A slight variation would be to
concatenate the x and y using a

Start Messages in SMS Inbox

when I go tot the Messages it's always going the email inbox... is it possible to mkae the default page is SMS inbox?
Solved!
Go to Solution.

The Messages list is a list for all messages, email. sms, pin, etc. You should have a separate sms/mms inbox. if you don't, go to Messages >Options and depending on your OS there are settings in there to control whether the sms/mms and email are combined or not.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Sms receiver list on 5800

I'm sorry to bother you people again! In 5800 is there any way to use recent sms receiver list? * I basically send sms frequently to some of my friends. It could be easier if there is recent sms receiver list so that I donot need to enter the number manually or select from phone book again and again

I agree with you, but I don't know of any solution.
The only thing that I can think of is that you can use the Contacts Bar homescreen option. That will allow you to have your top four contacts on top at all times. (I will also admit that this would be more useful if it had the 20 contact functionality of the newly announced 5530).
My solution for what you are saying is that I just keep my 5-6 most frequently texted friends in my inbox regardless of when the message arrives. Then I just hit reply.

Create a list style with unique space after the last list item?

I should start by saying that I'm a web designer and therefore extremely used to using CSS for type setting to the point that I now become frustrated when going back to the print world
So here's what I'm trying to achieve:
- I want to create a list style for bullet lists
- I want there to be 3pt space after and space before paragraph breaks
- I want there to be 9pt space after the entire list (or last list item)
I can't for the life of me figure out how to do this short of overriding the space after amount on the last item each time I use my style.

Hi supportneeder
Welcome to the forum.
Try this link:
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=179&mforum=iworktips ntrick
Pay attention to how +"styles work by example"+. Form up the list levels the way you want them and then select them to make the list style.
Personally I can't help remarking on the obtuse behavior of programmers that they manufactured all the problems on the internet and only now, more than a decade later, patch together "solutions" they struggle to implement due to the legacy of all the awful standards we never needed to have in the first place.
Peter
btw The last list item is always a problem in typesetting. Usually you deal with it by having a particular style for that or the paragraph afte,r all of which can take multiple forms.

List styles not showing up in Conversion Settings dialog

In linked Frame documents, RoboHelp collapses multi-level unordered lists (bullets and subbullets) to a single flat list. So this in FrameMaker:
Fruit
Vegetables
Carrots
Peas
Becomes this in RoboHelp:
Fruit
Vegetables
Carrots
Peas
This happens when I map both bullet and subbullet styles to "Normal" and choose "Convert Autonumber to HTML List". To resolve this, I can either map my subbullet styles to Source (which has its own issues), or I can map the subbullets to a different paragraph style. So I tried creating a list style. But now I can't select the new style from the Conversion Settings dialog. It doesn't show up in the RoboHelp Style drop-down, and I can't manually enter the style name. It's strange, because my other custom styles are listed.
I've tried switching to a differents CSS file and even restarting RoboHelp, but it's still not reading my changes. Any suggestions?
Thanks,
Melanie

Hi M_
It looks like you're mapping your 1st and 2nd level lists to the same css style in RH.
Try (for example) mapping
1st level bullets to BodyLevel1
2nd level lists to BodyLevel2
Converting your autonumber to HTML List
You should get nested UL's in your HTML, although IIRC there's an odd bugaboo if you have a single 2nd level list item at the end of your nested lists. I think that one's a bug in the conversion process, and is best handled by avoiding that situation in FM.
-Matt Sullivan
@mattrsullivan

Why does the content of my emails not show on the main Mail page but does in the Inbox list of all emails?

Why does the content of my emails not show on the main Mail page but does in the Inbox list of all emails?

Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank power On again in the normal way.] It is absolutely/appsolutely safe!

List style not visible in printed documentation

Robohelp 8.0.2
Is this a bug??? I opted to use a numbered list style rather than a numbered paragraph style to label procedural steps. The advantage of a list style is that skip numbering would not work properly using the paragraph style. i.e.:
'Steps' Paragraph style with numbering associated:
First step.
          Result of first step.
Second step.            * Bullets and Numbering does not allow me to consistently "Restart numbering at 2" (and HTML this produces is faulty).
'NumberedStep' List style with numbering:
   1. First step.
           Result of first step.
   2. Second step.               * Bullets and Numbering allow me to consistently "Restart numbering at 2."
Now I see the consequences of my decision: My 'NumberedStep' style is not included in the styles dropdown. Inconvenient, but not itself the end of the world.
The real problem is this: Printed Documents are not consistent with the style defined in 'NumberedStep'.
The font is larger than it should be, and indents are all over the place:
This is the selection I made on Generate Printed Document:
On first review, all the styles in my source translated easily to Word, but the style for NumberedStep text was not. That text is now 'Normal'.
I've hunted high and low to solve this issue, so a direct reply is appreciated.

Firstly, your better off using liststyles than paragraph list styles, I screwed around a long time before I had to set everything to liststyles rather than paragraph ones. So dont worry about that.
The first issue, of not seeing the style - it is there, if you open the Styles tab on screen (click in a topic to get the cursor, then Format > Styles), not just the dropdown like youve shown youll see a list of all your styles, almost, it will show paragraph styles, click the drop-down and select All available styles, this will display your list styles as well!
Im not sure about the style settings, I have the same text setting applied in my list style as I use for my 'normal' text. Though I think you can select the text in a list and apply a paragraph style to it....i just tried and it worked, but to be on the safe side you might want to set the text formatting in the list style css too..
mine looks like this
li.NumberList {
    font-family: Helvetica, sans-serif;
    font-size: 10pt;
    color: #524C45;
    list-style: decimal;
    margin-bottom: 6pt;
    margin-top: 6pt;
As for printed formats not indenting lists, this is an issue. So far I have found no way around it because you cannot map a list styles in RH to a list style in Word. This has also created errors for line spacing and indents - and I found the indents are severly messed up when using list styles in snippets. Everytime I create printed documentation I have to manually fix it, a pain but it doesnt take too long....you could use macros etc to speed it all up for you.
Submit a Wish Form.
Hope it helps.
Nick

How to make Robo list style link to Word style?

I am using RoboHelp 8. When creating printed documentation, I have found that my RoboHelp list styles do not appear in the Print Document Appearance dialog when I am trying to link Robo styles to styles in my Word template, so I am not able to link them to styles in Word. All list styles come across in Word as Normal, although oddly their bullets and numbers appear correctly.
Is there any way to link Robo's list styles to Word's list styles?
Thanks for any available enlightenment.
John

The official answer is that you cannot map single level lists but there is a method on my site.
http://www.grainge.org/pages/authoring/lists/lists_single_level.htm
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

List styles different in application and in preview

I have a book I am writing which is mostly in bulleted list style. I have created list style for the first level and second level lists. It looks great in the app itself but when I preview it on a iPad it looks different. For example it looks like this in the app
test text
test text
test text
test text
test text
test text
When previewed it looks like this
test text
test text
test text
test text
test text
test text
I want it to be consistent and not sure what's wrong? Any ideas?

If I may re-open this thread, let me ask the question FordPrefect only alluded to:
Given that I should be using a pro-level HD broadcast monitor to view everything, given that every piece of footage is different in the particulars, and given that the Canvas Window image is almost always different than any other playback system (Finder, QT, VLC Players, etc.), are there general exposure/gamma changes y'all make to account for the visual difference between the Canvas Window and other playback systems? If you're anything like me, you don't start from SCRATCH on every single edit... You have a few go-to filters with a few go-to settings, and then make minor adjustments according to the needs of the footage.
For instance, in order to get the exported image close in exposure to the ideal Canvas Window image, I usually go: Effects - Video Filters - Quicktime - Brightness and Contrast - and then adjust the Brightness to 0.85 and it seems to get close.
You guys have anything like that? Thanks for any help!

RoboHelp - how to create Number1 and Number list styles?

In RoboHelp 11, I have multi-level lists and normal lists. The multi-level list will continue numbering after a break in the list, like so:
1. step one
2. step two
break
3. step three
If I want step three to start a new list, I go to the HTML and manually add a start="1" attribute. The normal list will start over at 1 after each break, and if I want it to continue I need to add a start attribute for wherever I left off.
What I want is what I use in FrameMaker: a list style for Number1 that I can add when I want to restart lists, and a Number/Number_next for continuing where I left off, without having to manually alter the HTML. I feel like I'm missing something because I can't find an option to create a list like this in the CSS editor, and I can't figure out what to add manually to the CSS file in a text editor that makes RoboHelp recognize what I want it to do. But obviously the option exists because the multi-level list and the normal list exhibit both behaviors that I want.

In RoboHelp (or HTML), there is no feature like you have in Frame. Both Multilevel list and regular HTML lists require you to set the numbering after you break.
An alternative way of working may be to not create real paragraph but to end line feeds pressing Ctrl+ENTER. This won't break the list numbering while you can add multiple lines.
Kind regards,
Willam

No Sender Name in SMS Inbox

I have just changed from a Pearl to a Curve and have a problem displaying the senders name in the SMS inbox even if they are in my Contacts. I had the same problem on the Pearl but found that if I also saved the contact to the SIM, the name would then appear in the Inbox.
I have tried the same solution on the Curve but it has not worked. It is driving me mad as I don't know who a text message is from.
Anyone know anything which will help
Thanks
Cris

Hi there Yes, it has to do with the prefix
To fix it go to call log -> smart dialing -> and in "country code" change to your country's code (44 in your case)
That'll fix the name on the messages

Error with list styles using image bullets

I cannot use list styles with image bullets in the mapping of
Framemaker documents. If I define and map a format with image
bullets, then Robohelp creates the correct HTML/CSS code but during
the Webhelp output forgets to copy the used image files to the
required locations. It is possible to manually copy the image files
into the output then the webhelp displays correctly but this is no
possible process for us on a regular basis.

Hi
It's to hard to Mind-Read.
What did the Error Message say ?
You are aware of the 99 photos per SlideShow limit in iDVD ?
I do My SlideShows in
• iMovie HD6 (or FinalCut) or
• FotoMagico
as there are less limit's here
Yours Bengt W

E66 SMS Inbox List Style

Similar Messages

Maybe you are looking for