E7-00 activating email notifications for one speci...

My personal email has been setup through the built-in email client, and my corporate email through Notes Traveler. I'm running S^3 Anna, with Traveler 8.5.3.
What I want to do is to just receive notifications for new emails on my personal email account, and deactivate the notifications from emails arriving to Traveler. This is something that worked in the past with my old E71-2, where I could select which email account could notify me, and it worked perfectly for me due to the deluge of work related emails.
On the E71 device I had the Nokia email app for my personal email instead of using the built-in email client. This app appears that is no longer available to download, so I had to use the built-in email client that comes with the E7-00.
I've looked everywhere on the phone, and appears that there is only two choices:
a) Disable email notifications for all email accounts
b) Enable notifications for all accounts.
If anyone has any idea how to selectively configure email notifications in a E7 the way it was able to do in my E71, I would greatly appreciate it.

e7 does NOT have email notifications. You just have to place the pers acc widget on the homescreen. E7 does NOT have options to configure def acc either. Push works on LT & MFE but NM push does NOT either. Anna makes all these things worse. Good luck.

Similar Messages

  • Multiple email notifications for one task

    Hi Al,,
    I am getting more than one email notifications for one task in less than an hour. Please let me know if any one has ocem across this situation and got the solution.
    your remarks are highly appreciated with points!
    regards,
    theja

    Hi,
    Are you using this RSWUWFML2 program or Extended notification to receive the email notification.
    If Yes Choose 'One Message per Work item'.
    If no, tell me from where you getting the email.
    Regards,
    Surjith

  • Email Notification for substitutes.

    Hi,
    There are five active substitutes maintained for a user in the system.
    The email notification for approval workitem of shopping cart goes to only one of the substitutes.
    I cant figure out why the email notification does not go to the approver himself and also to other substitutes.
    Could you kindly help me by giving your inputs ?
    Thanks a lot
    Bhakti

    Hi,
    resolved : The forward_wi attribute was not set and one user was locked.
    -bhakti

  • Email Notifications for both UWL Tasks and Collaboration Tasks.

    Hello,
    I want to configure Email Notifications for both UWL Tasks and Collaboration Tasks.
    Could any one please give me the configuration steps.
    Thanks in Advance.
    Regards,
    Sridhar.

    Hi sri,
    Refer the following threads
    https://www.sdn.sap.com/irj/scn/thread?threadID=147316
    https://www.sdn.sap.com/irj/scn/thread?messageID=315715#315715
    https://www.sdn.sap.com/irj/scn/thread?messageID=1170132#1170132
    Regards,
    P.Manivannan

  • Email Notifications for UWL Tasks and Collaboration Tasks

    Hi,
    I want to configure Email Notifications for both UWL Tasks and Collaboration Tasks.
    I done with the all the Configurations suggested in the below link:
    [https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/706d054d-da24-2b10-f18a-fc82faf6468e]
    But Email Notifications are not reaching the users Lotus Mail ID. Could any one please suggest me that i am missing any Configurations.
    Thanks in Advance.
    Regards,
    Sridhar.

    Hi Sridhar,
    I created a Wiki page with usefull links to troubleshoot problems with the Email connectivity from KM:
    https://wiki.sdn.sap.com/wiki/x/g4KmAw
    Please see if it helps,
    Robert

  • Email Notifications for Collaboration Tasks are Not going to Lotus Notes

    Hello Everyone,
    Email Notifications for the Tasks in Collaboration are not going to Lotus Notes. We are working on EP 7.0 SP14 with external ITS and backend r/3 4.7.
    I performed all the configuration activities that are suggested in the below wiki:
    https://www.sdn.sap.com/irj/scn/wiki?path=/pages/viewpage.action&pageId=61244035
    It was worked fine once for me when i perfomed the activities mentioned in the below thread:https://www.sdn.sap.com/irj/scn/thread?threadID=147316
    But after restarting our Portal Server the Email Notifications for Collaboration Tasks are not coming.
    Could any one please suggest that we need to do any other configurations.Thank you.
    Regards,
    Sridhar.
    Edited by: Sridhar on Mar 18, 2009 12:14 PM

    Hi Sridhar,
    I created a Wiki page with usefull links to troubleshoot problems with the Email connectivity from KM:
    https://wiki.sdn.sap.com/wiki/x/g4KmAw
    Please see if it helps,
    Robert

  • Active Task Notification for Rescheduled Tasks

    Active Task Notification for Rescheduled Tasks
    version 2007
    I'd like to setup a notification to the Performer when their rescheduled tasks become active again.  I've tested emails triggered by "Notify when activity starts:", but have had no success.  Ideas?

    Hi David,
    Go to the System Administration -> System Configuration -> Knowledge Management -> Content Management
    Then Global Services -> Scheduler Tasks -> Scheduler for Deadline Task
    When you edit the WFTaskSchedulerDeadline you have a property called Time Table.
    There you can define how often and when the task should run.
    Greetings, Marcel

  • LMS 4.2 - Two notifications for one alarm.

    Currently when a device, say a router goes offline we receive two Active 'Unresponsive' alarms for the router and then when it comes back online we receive two Cleared 'Unresponsive' alarms. All have their own unique Event ID. (shown below)
    I was wondering if anyone could help me to config LMS to send only one Active 'Unresponsive' notification when a device is offline and then one Cleared 'Unresponsive' when the device is back online.
    Here's an example of the Active 'Unresponsive' alarms I receive when I power the router off:
    Notification 1
    EVENT ID               = 0002BI5
    TIME                   = Thu 29-Nov-2012 15:26:32 EST
    STATUS                 = Active
    SEVERITY               = Critical
    MANAGED OBJECT         = router.domain
    MANAGED OBJECT TYPE     = Routers
    EVENT DESCRIPTION       = Unresponsive::Component=172.16.1.254 [router.domain];ComponentClass=IP;ComponentEventCode=1098;InterfaceType=ETHERNETCSMACD;InterfaceMode=NORMAL;InterfaceAdminStatus=UP;Address=172.16.1.254;IPStatus=TIMEDOUT;InterfaceOperStatus=UP;Ne
    CUSTOMER IDENTIFICATION = COMMS TEAM
    CUSTOMER REVISION       = 1
    NOTIFICATION ORIGINATOR = Fault Management Module
    Notification 2
    EVENT ID               = 0002BI6
    TIME                   = Thu 29-Nov-2012 15:26:57 EST
    STATUS                 = Active
    SEVERITY               = Critical
    MANAGED OBJECT         = router.domain
    MANAGED OBJECT TYPE     = Routers
    EVENT DESCRIPTION       = Unresponsive::Component=router.domain;ComponentClass=Router;ComponentEventCode=1101;SystemObjectID=.1.3.6.1.4.1.9.1.569;Description=Cisco IOS Software, C870 Software (C870-ADVIPSERVICESK9-M), Version 12.4(15)T13, RELEASE SOFTWARE (
    CUSTOMER IDENTIFICATION = COMMS TEAM
    CUSTOMER REVISION       = 1
    NOTIFICATION ORIGINATOR = Fault Management Module
    Any suggestions?

    Am I alone with this issue of receiving two notifications for one Unreachable event?

  • How to stop ical from sending email notifications for updates on my share ical calendar

    Is it possible stop ical from sending email notifications for updates I make on my share ical calendar?
    Mac OSX 10.7.2
    Very annoying for the person I am sharing my calendar with to get an email every time I change something.
    I hope there is a way to stop the emails, but for the updates to still go on their calendar.
    Thanks

    Great idea Lofty! thanks. If the person you are sharing a calendar with is a Yahoo Mail user, you only need to set up one filter (under Options - Mail Options - Filters) and route to Spam folder or a special folder for that purpose.
    Add a filter with the following parameters:
    Sender contains:    "Your First and Last Name" as it appears in the emails they are receiving
    Subject contains:  "Your First Name"
    Email body contains: "iCloud"
    Don't need to match case on anything. 
    So far, only these unwanted emails are being routed to the folder I chose.
    Hope that helps until Apple gets it's act together

  • Email Notification for PR

    Hello all ,
    We usually get an email notification when a PR is converted into PO. But now we are getting 2 or 3 email notifications for the same PR. What do i need to do ?
    Please help me with this.
    Thanks,
    Avani.

    Hello Avani,
    If more than one PO is created using the same PR then it can be possible, check whether it is happening only for few PRs or for all the PRs.
    Hope this helps.
    Regards
    Arif Mansuri

  • Email notification for approval sent to all managers

    Hi everybody,
    an astonishing process occurs in the workflow, a shopping cart was sent for approval, waiting for the manager linked to the requester in organizational structure to receive an email notification for approval,
    unfortunately , in certain case the email is sent to all managers even if we did a control in the badi concerning the workflow according to their role and flag is_manager in the structure.
    Is there anyway to check the flow and try to debug it to understand the way the workflow build this email notification and furthermore how the managers are selected?
    I already passes through the FM RH_GET_ACTORS, I had a look on the report RBBP_OFFLINE_EVAL.
    Thank you in advance for your suggestions.
                             Best regards Mahmoud

    Hi Manoj,
    I check this note today but it 'sounds'  good.
    There are two other notes which are interesting adding to the previews one: 764068 and 636540.
    Thank you very much for your reply.
                          Best regards Mahmoud

  • Email notification for Process Chain Status

    Hi Experts
    Can any one suggest me how to setup Email Notification for the Process Chain status
    For eg If there is any error in the process chain is there any way that we get an Email notifications.
    Thanks

    http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=64389689
    This can be perfectely done using Tcode ALRTCATDEF.
    1. go to ALRTCATDEF
    2. select classification "Process Chains"
    3. click on display/change
    4. double-click on "error in a process of a process chain"
    5. click on "fixed recipients"
    6. write in your username (you have to maintain your e-mail address in SU01 for that to work)
    7. save
    8. go to your process chain (rspc)
    9. go into edit mode
    10. from the menu, select Process chain -> attributes -> alerting
    11. check "send alerts if errors occur".

  • EMAIL NOTIFICATION FOR DBMS_SCHDEULER JOB STATUS IN ORACLE 10G

    Hi All,
    I want to configure email notification for the job which is running through BUMS_SCHEDULER in oracle 10g
    Please provide the steps for configuration of the email notification.
    Thanks
    Mak

    Is your problem that you do not know how to send an email from Oracle 10g? If so then you use the UTL_MAIL package.
    Here's an example of calling it as part of a scheduler chain, not strictly what you're asking for but this lets you define success and failure steps and call each one based on the status of previous steps.
    BEGIN
    DBMS_SCHEDULER.CREATE_PROGRAM (
       program_name           =>'prg_Export_Success',
       program_type           =>'PLSQL_BLOCK',
       program_action         =>q'[BEGIN
                                    UTL_MAIL.SEND (
                                       sender      => 'who_its_from',
                                       recipients  => '[email protected]',
                                       subject     => 'subject line',
                                       message     => 'the message',
                                       mime_type   => 'text/plain; charset=us-ascii');
                                    END;]',
       number_of_arguments      => 0,
       enabled                  => TRUE,
       comments                 => 'Email success');
    end;
    BEGIN
    DBMS_SCHEDULER.DEFINE_CHAIN_STEP (
       chain_name      =>  'Export',
       step_name       =>  'stp_EXPORT_SUCCESS',
       program_name    =>  'PRG_EXPORT_SUCCESS');
    END;
    /... then define appropriate rules.

  • To stop email notification for a user regarding PR release in workflow

    Hi All,
    I am new to workflow.
    I need to stop an email notification for a user who receives it for PR release.
    I checked earlier posts which stated some send email steps in workflow and extended notifications.
    But I am not aware of any of this things.
    Can you all please help me in resolving this? As i hardly know anything about workflow.
    How can i check where this email notification gets triggered or from where it picks the user id?
    Your help would be appreciated.
    Thanks.

    Hi Dharmin
    Identify which workflow is for PR:
    Go to T Code SWI2_FREQ
    Select the appropriate date range
    Work item Type should be (Sub-)Workflow
    Execute
    You will get the list of ALL workflows triggered during the given time interval
    Hopefully, the developers in your system have maintained the correct Work item text and you can identify the PR workflow . Pick the WSxxxxxxxx number from the "task" Column for the PR Workflow
    Go to SWDD and analyze this workflow, check for steps which are sending the emails.
    (simplest possibility)
    Once you find the step, see if this can be blocked for a given user or not (or will it block for everyone).
    Reach there and give us the details of the email step and we shall work out a way.
    BTW - did you try to ask for the Functional and Technical Specs for this ?
    It should contain some details to help you.
    Regards,
    Modak

  • Alert Email notification for Log file alerts

    Hi,
    Scenario: SCOM 2012 R2 UR4.
    There are created unix/linux log file monitoring objects. In SCOM console I can view alerts related to unix/linux log file monitoring. Email notification is: Warning or Critical for severity, and, Medium or High for priority. The alerts for unix/linux log
    file are severity warning and priority medium.
    In my inbox there are emails for alerts (Warning or Critical for severity, and, Medium or High for priority) except for unix/linux monitoring.
    The question is:
    How to enable email notification for unix/linux log file monitoring?
    Thanks in advance!

    Hello,
    If you go into the "Subscription" in the Notifications section of the Operations Console\Administration, you should be able to see the Description of the subscription criteria.  Could you copy paste that in a reply?
    Thanks,
    Kris
    www.operatingquadrant.com

Maybe you are looking for

  • Adobe Edge Animate CC don't start in Windows 8.1

    Adobe Edge Animate CC does not start in Windows 8.1. I click on the application and the cursor stays in loop. I have tried to uninstall to reinstall it and will not let me. If they know of any similar error and resolve it I would like to help me, tha

  • Can I use a 133Mhz bus processor in a PowerMac G4 AGP?

    Hi so I have a little problem here. I sold a PowerMac G4 AGP to a friend of mine. It has the stock 400Mhz processor installed with Panther running on it. My friend got an iPod for christmas and it requires Tiger to sync it. The problem is that whenev

  • How to throttle a Queue 7.31 single stack.

    Hi All, I have an interface where it is possible for thousands of messages to arrive at one time. However the backend system cannot handle all the messages together. We want to restrict the message throughput for this message type. What options do we

  • Recommend a simple iphone password app that backs up to an Excel file?

    Need a simple password application for iphone (5C). App should reside entirely on the phone not the cloud, backup by wifi to computer, backup to or export the entire password file to an Excel file, have a search function for subjects, click to enter

  • Camera RAW and DNG version 8.2

    I have a Canon 70D.  How do I find out what version of camera raw and dng  that I have installed?