E7-00 always showing the "updates available" icon,...

My phone keeps showing the icon but when I try to update it says that no updates are available. I've tried anything I can think of (restarting the phone, connecting to a PC with OVI suite and re-updating the system from there) with no results.
The icon it's always there, ad it seems there to stay.
Anyone has any idea on how to solve this ???
Thank you in advance,
                 Davide
Solved!
Go to Solution.

@dpandini
Try going to SW updates > tap on three horizontal line icon at bottom right of screen > Settings > Auto-check for updates = OFF
You also need to temporarily turn off mobile data and restart to remove the notification.
Happy to have helped forum with a Support Ratio = 42.5

Similar Messages

  • Display issue - horizontal white lines and vertical multicoloured lines.... UNRELATED: constant "update available" icon?

    Hi, my Curve 9300 on the OS 6.0 system has vertical and horizontal lines accross the display, with more appearing every day...   started and the top and left areas of the screen and seem to be slowly migrating & multiplying.
    I tried first turning the phone off and back on again.  Then the battery pull reset.  Now I've tried downloading the OS update direct from the blackberry site and reloading it....   all to no avail.
    Everything is functional, but lines accross the screen are constant.  Since my phone is past warranty anyway, I would like to open it and check the screen connection, but I do not have a torx driver that small to fit the little screw in the back....  Is there anything else I can try, or an easy enough way to remove that screw without having to buy a stupid screwdriver that I will likely never use again...?
    One other thing I've been meaning to find out about...   Despite attempting to update multiple times through the Blackberry Desktop Software, and even now after downloading the update direct from the Blackberry site, my phone continues to display the "update available" icon (with the star in a red circle on a BB outline), and indicates an update required for BB OS 6, yet the desktop software says "no updates available" and I couldn't find anything more recent on the Blackberry site unless there is a way to put OS 7 on the older blackberries.  Why might this be happening and have I missed something?
    Thank you!

    In terms of heat I'm not sure.
    It isn't only one spot that you can push to get it to come back. I have to manipulate the screen carefully in a number of different combinations. Also if the screen brightness is down the and screen fully open with an external monitor on the screen can sometimes clear up even after 4 hours plus of use. If I then move the screen up it will take a few minutes to go bad again. Even if the brightness is left down.
    I actually have a spare screen from an old 400mhz model which is identical brand. Its just not in as good condition and has to bright spots in the corners and one dull area middle bottom. Its just not in as good nic as the current one when its working. Is there a way to 'tighten' the LCD in case its a pressure problem or is still a heat issue?
    Many Thanks, Tre.

  • I have Adobe Photoshop Elements 10 plus I create PDF files for work some are scan pdf docs. When I install Photoshop Elements 10 it DOES convert all the PDF files to Photoshop Elements-10 Docs. it even changes and shows the PSE-10 Icon. So I am alway inst

    I have Adobe Photoshop Elements 10 plus I create PDF files for work some are scan pdf docs. When I install Photoshop Elements 10 it DOES convert all the PDF files to Photoshop Elements-10 Docs. it even changes and shows the PSE-10 Icon. So I am alway installing PSE-10 or uninstalling it. If I send the  PDF file that has been automatically converted to a PSE-10 the person I send the file to can not open it because they do not have PSE-10. What can I do to stop PSE-10 from converting my PDF files? Don't tell me to upgrade PSE-10 I tried their on-line program and  it is too advance for a hobby photographer like myself and their Help Desk is impossible to reach.

    Hi,
    Can you please share the logs?
    You can use the Adobe  Log Collector tool (Log Collector Tool) and share the corresponding zip file @ [email protected]
    Thanks,
    Shikha

  • HT1338 The Mac App Store shows an update available for iMovie but when I click "update" it gives me this message, "The product distribution file could not be verified. It may be damaged or was not signed." What can I do to update this program?

    The Mac App Store shows an update available for iMovie but when I click "update" it gives me this message, "The product distribution file could not be verified. It may be damaged or was not signed." What can I do to update this program?

    http://www.apple.com/support/mac/app-store/contact.html?form=account

  • Apps icon shows updates when i go there the update all icon is not highlighted if you go to any of the UPDATE box's you are directed to the application????

    apps icon shows updates when i go there the update all icon is not highlighted if you go to any of the UPDATE box's you are directed to the application????

    ATtempt to power off your device and power it back on, if that doesn't work reset all settings should resolve it for you

  • HT4623 when i make software update my i phone shut down and it can't start it always Show the apple mark and then disappear i can't make any thing what the problem and what the solution thank you

    Dear gentlemen:
       i know how can update ios update but when i make update my iphone shut down and it can't start.
      it always Show the apple mark and then disappear i can't make any thing i need know what can i do ?
    thank you

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • My appstore app shows an update available for CodeBox, which I did not buy, does anyone know what the problem could be? I don't think I have been hacked (no money subtracted, etc.)

    Hi all,
    For some time now, my appstore app shows an update available for CodeBox, which I did not buy. When I try to update it it asks for my ID and password (all normal), but then it gives an Unknown Error.
    I am 100% sure I didn't buy the app, I do not see any transaction on my card or in the appstore apart of this one, so does not seem to be a hack.
    Does anyone know what is happening, this is a tricky thing which is making me lose trust in the payment/account system that Apple is using.
    Thanks!
    Isidro

    well... actually you are right dahveed, i had a dodgy copy of galaxy on fire 2 (boring game), that's what was giving me the issue. i followed your posts about the MAS etc., and discovered this was the problem. Corrected. You're a knowledgable man, thank you

  • Hi, I can't access my iTunes store even though I had updated to the latest version of the iOS. It always shows "the request could not be processed" when I tried to access the iTunes store. Pls help..

    Hi, I can't access my iTunes store even though I had updated to the latest version of the iOS. It always shows "the request could not be processed" when I tried to access the iTunes store. This has been going on for the past 3 days already. Pls help..

    Many thanks b Noir
    This is a copy of ONEof the keys  in the registry I changed  as told by Apple support today. I also have changed others as instructed by GEAR  software support to manually delete GEAR drivers (that I had installed but couldn't delete some of the others  they mentioned from Windows system 32. Then some bright spark at work told me I need the Gear drivers so  I downloaded the software and installed again.
    Sorry, just this minute went to insert image  and it is giving me a message saying this sort of content  is not allowed?.
    The most recent key I altered is in: HKey _local _machine. System\class - 4D36E965-E325-11CEBFC1-08002BE10318. Upper Filter data: Upper filter NTIDrvr  SiRem GEARAspiWDN.
    The GEARsoftware info about manually deleting  GEAR drive is from:
    http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:_Windows_-_Updating%2C_ removing%2C_64_bit_versions%2C_etc
    I hope you can help

  • Cannot re enable the add ons after the new 13.0.1 update ,it shows no update available and all the add-ons are disabled

    cannot re enable the add ons after the new 13.0.1 update ,it shows no update available and all the add-ons are disabled

    I have the same problem. One minute everything was okay, the next minute all my addons were disabled.
    Adobe Acrobat 10.1.3.23
    AVG Site Safety Plugin 11.1.0.4
    Google Update 1.3.21.115
    Java Deployment Toolkit 7.0.50.255 10.5.1.255
    Java Platform SE 7 U5 10.5.1.255
    Shockwave Flash 11.3.300.265
    VLC Web Plugin 2.0.2.0
    Windows Presentation Foundation 3.5.30739.1
    I can reenable them but FF will disable them on the next startup. I uninstalled version 13 and installed version 12. Problem gone! So I'm still using version 12 and am afraid to update to version 13.
    This problem began when I was trying to research and fix a problem (no history all-of-a-sudden) so it probably was something I caused. Can't recall everything I did though.
    So: Does the addon problem I described have a solution? If so, I'll update my version 12 to version 13. Please respond.....

  • How do I prevent the "update available" message while I'm watching a program?

    My 2011 Mac Mini is connected, via HDMI, to my 46" Samsung HD TV. I buy and rent 1080 movies and TV shows from iTunes. I also play a lot of other files that I've downloaded from other places. It's terrific except for one fly in the ointment...
    No matter what I'm watching, iTunes, NetFlix, VLC, Quicktime or straight off the desktop; if there is new software available, I get that annoying message that appears in the upper right hand corner. I can slide it to the right but it comes back a few minutes later. I could stop everything and perform the upgrade 10 to 30 minutes later but is this really the way video on a Mac is supposed to work? I feel there should be a way, at least, to pervent this from happening when I'm watching a program/movie/TV show. If it happens between, fine but why does it always have to pester me when I'm trying to enjoy watching T.V.?
    I know there is a way to turn it off, for the day, but come on- There's got to be a better solution than that. My U-Verse box very rarely bugs me about things. OSX and/or iTunes does it ALL the time. Can't it give me a break when I'm watching T.V.?
    Hopefully, I just missed some setting but I've tried a few things that didn't work.
    This is not a disaster but if someone knows a solution, I would be very grateful!
    Thanks!
    Teddy

    Mende1,
      Thanks for the super-fast response!
    I believe I tried this once before but the check box for "Automatically check for updates" always comes back, the next day. However, this might be my best solution for now and I'll test it watching the latest "Ripper Street", in iTunes, tonight. If it lasts the length of the program, I'll have to decide if I want to select "This solved my question" or "This helped me."
    I think I expected Apple to be a little more inTune with this. I absolutely love watching programs with my Mac Mini via HDMI. If they could find a consistent way to not interrupt programs, even with "Automatically check for updates" checked, the Mac video experience would be nearly perfect.
    I do make sure to perform updates but, between my wife's Mac and my two, plus the fact that updates seem to be occuring on a weekly basis, it's not easy to update immediately. I just feel that if a person is watching a movie or T.V. program, it's very clunky to have the "update available" message continuously appearing.
    Thanks again!
    Teddy

  • Apps menu shows 5 updates available, but when I go to download them it says none are available

    apps menu shows 5 updates available, but when I go to download them it says none are available.  How do I remove that number?

    Get some apps from someone else, perhaps? You can check by doing a "Get Info" on your apps; that will show the account under which they were purchased.
    Oh, and just to clarify so I'm not barking up the wrong tree, what exactly is iTunes saying? Is it showing the number in the icon indicating that there are five apps to be updated but showing the screen that says "No updates are currently available"? Or is it giving an error message somethign like "the item you requested is not available in the iTunes Store"?
    Message was edited by: varjak paw

  • Ipad can not be restore, shows the usb cable icon.

    When I turned it on (whitout being conected to the computer)  the screen shows the usb cable icon for a minute and then turns it off.
    If I connect it to Itunes:
    " Itunes has detectes an Ipad in restore mode. You have to restore to use it in Itunes."   I try to restores but:
    "Extracting software...preparing the restauration...waiting for the Ipad.....the Ipad could not be restore erro 9"
    always like this..
    Can anyone help me, please?   I was watching a video and  stopped working...
    Manuel

    Click 9  >  iOS: Resolving update and restore alert messages

  • Error 4013. my iphone 4s with ios 7 suddenly colllapsed. It appears the apple and turns on and off, always showing the apple.

    error 4013.
    my iphone 4s with ios 7 suddenly colllapsed. It appears the apple and turns on and off, always showing the apple.
    I try to connect it to itunes but when it tries to install the software again it appears error 4013. i tried changing the usb port anda the connecting cable buit it doesnt work. what shall i do??

    Did you already check these suggestions?
    Check USB connections
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
    Common errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response”, and being prompted to restore again after a restore completes.
    To narrow down the issue, you can also change up your hardware:
    Use another USB cable.
    Plug your cable into a different USB port on your computer.
    Try a different dock connector (or no dock).
    Add (or remove) a USB hub between your device and computer.
    Connect your computer directly to your Internet source, with no routers, hubs, or switches.
    If you see your error after changing your USB connections, continue to the next section to troubleshoot your hardware.
    copied from Resolve specific iTunes update and restore errors

  • Purchased tab shows 1 update available but can't update it.

    Purchased tab shows 1 update available, but I can't find what book. I keep getting popup that it can't download the update. Why did the updates tab disappear in ios8?
    FIrst it showed 2 updates, but I kept getting a popup that it couldn't download the update. So I had to search in my list of books which books had updates. I just deleted all the books that had an update message. It kept showing 2 updates available, until I deleted every book I could find that had an update. But now it keeps showing a 1, and I can't find the corresponding book, and I keep getting a popup that it can't download it, even when ibooks is closed.
    WHy did they delete the updates tab?

    What is the exact message you're getting?  I guarantee it's not "the iPhone needs iTunes".

  • The sandbox of Unified Contact Center Enterprise always shows the error "Finesse is out of service."

    Hi guys,
    I reserved the sandbox of Unified Contact Center Enterprise. But when I open the desktop application from the url "http://10.10.20.60/desktop/container". It always shows the error "Finesse is out of service.".
    Does anyone meet the issue?
    William

    Hi DeveloperMax,
    According to your description, the error occurs when you execute the package with Agent job on clustered MSSQL 2012 Enterprise Nodes.
    As per my understanding, I think this issue can be caused by you use SQL Server Agent to schedule a SQL Server Integration Services package in a 64-bit environment. And the SSIS package is referencing some 32-Bit DLL or 32-Bit drivers which are available
    only in 32-bit versions, so the job failed.
    To fix this issue, we should use the 32-bit version of the DTExec.exe utility to schedule the 64-bit SQL Server Agent to run a package. To run a package in 32-bit mode from a 64-bit version of SQL Server Agent, we can go to the Job Step dialog box, then
    select “32 bit runtime” in the Advanced tab.
    Besides, we should make sure that SQL Server Integration Services is installed on the failing environment.
    If there are any other questions, please feel free to ask.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

Maybe you are looking for

  • I have a complete mess on my hands and don't know how to proceed to correct it.

    I use Itunes for windows to manage my music. This consist to CD's and Purchased music from the Itunes store. I also use Virtual DJ Broadcaster to play my music.  I have been well pleased with the results until lately. I had the "SMART IDEA" to clean

  • Please give me this solition

    1.  A standard SAP – report (RFKOPR00 - Vendor Appraisal with open item Sorted List) complies with the business requirements.  This report can be extended to report on Vendors open items in the NEW report format required. 2. Changes to be done for th

  • Unable to read lsmw.conv file.

    Hi, While performing the step in LSMW: display converted data, I am getting the error " Unable to read file 'c:\CDD203_SRCLST.lsmw.conv'". Please Help. thanks in Advance, Rajeev

  • Namespace in v$libraryacche

    in v$librarycache we have a columns NAMESPACE...here one roiwn of this view shows a namespace "TABLE/PROCEDURE" and another is "CLUSTER"...what does it mean...i know that we can store packages or SQL statements in library cache but how clusters and T

  • Table nyoame and field name..

    hi frds can anyone explain me what is OPEN PO Number and Qty and give its table name and field name ?? by PARI VENDHAN.R