E7-00 and SIP over Internal Network (WiFi)

Hey all, maybe someone here knows something more about it.
I want to use an Sip account in our internal Network via WiFi. Our Telephone-Central (Panasonic TDE-100) supports connections to it via Sip (internal SIP-Server).
I can connect with my User-Account and it says connected.
I can make calls into the internal Telephone-Network
Now the Problem:
I cannot be called internal. The TDE is sending an INVITE to the E7 and the E7 declines it when a call is coming in.
I have also an external SIP Account with another Provider. That one works as it should.
Our Technical assistance for the TDE has no idea, neither the their technical guys from Panasonic.

Welcome to the Apple Community.
I'm not sure whether an Apple TV can connect to a wifi hotspot, however even if it could you are going to experience extremely slow downloads and reach your devices data limits very quickly.
This is not a practical way to use an Apple TV.

Similar Messages

Sip 503 service unavailable and sip 500 internal server error

Hi guys,could any one help me in the following.
ITSP-->Voice gateway configured as CUBE-->CUCM-->UCCX
I am moving a system from cme and aa enviroment to cucm and uccx
The VGW is configured as CUBE and also is added as h323 gateway on cucm.
When i tested the debug ccsip messages shows
Sip 503 service unavailable or
sip 500 internal server error.
I can't now provide any debugs cause i am not on site,only on Saturday.
As i read in previous discussion that could be the bind source address problem but i had this configured.
Also i tried to configure the gateway instead of h232 to use sip trunk from cucm,but after this the incoming calls didn't even reach the router,the debug ccsip messages showed nothing.
For now can any one advice me to what these 2 errors related to.
What could be missing?
Thanks in advance.

Hi there : can some one explain the reason that i am getting this sip error with itsp:
here is the debug of ccsip messages:
Received:
INVITE sip:[email protected];user=phone SIP/2.0
Via: SIP/2.0/UDP 188.254.68.66:9298;branch=z9hG4bK-6110d60075a24c0f-a3c000c-1
Call-ID: isbc6994325518768294927-1385194135-11717
From: [email protected];user=phone>;tag=sbc09106994325518768294927
To:
CSeq: 1 INVITE
Min-SE: 90
Session-Expires: 3600;refresher=uac
Contact:
Allow: INVITE,CANCEL,BYE,ACK,REFER,UPDATE,INFO,PRACK
Supported: timer,100rel
Diversion: [email protected]>;privacy=off;screen=no;reason=unknown,[email protected]>;privacy=off;screen=no;reason=unknown
Max-Forwards: 70
User-Agent: VCS 5.8.2.56-03
Content-Length: 394
Content-Type: application/sdp
v=0
o=- 87852 198805 IN IP4 188.254.68.67
s=SBC call
c=IN IP4 188.254.68.67
t=0 0
m=audio 23682 RTP/AVP 8 0 18 98 96 97 101
a=rtpmap:98 G.729a/8000
a=rtpmap:96 G.729ab/8000
a=rtpmap:97 G.729b/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=fmtp:18 annexb=no
a=ptime:10
a=X-vrzcap:vbd Ver=1 Mode=FaxPr ModemRtpRed=0
a=X-vrzcap:identification bin=DSR2866 Prot=mgcp App=MG
00:43:23: //11/FDB448CE8020/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 188.254.68.66:9298;branch=z9hG4bK-6110d60075a24c0f-a3c000c-1
From: [email protected];user=phone>;tag=sbc09106994325518768294927
To:
Date: Sat, 23 Nov 2013 08:06:29 GMT
Call-ID: isbc6994325518768294927-1385194135-11717
CSeq: 1 INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-12.x
Content-Length: 0
00:43:23: //11/FDB448CE8020/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 503 Service Unavailable
Via: SIP/2.0/UDP 188.254.68.66:9298;branch=z9hG4bK-6110d60075a24c0f-a3c000c-1
From: [email protected];user=phone>;tag=sbc09106994325518768294927
To:
c2801#er=phone>;tag=27BA64-1DAE
Date: Sat, 23 Nov 2013 08:06:29 GMT
Call-ID: isbc6994325518768294927-1385194135-11717
CSeq: 1 INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-12.x
Reason: Q.850;cause=38
Content-Length: 0
00:43:23: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
ACK sip:[email protected];user=phone SIP/2.0
Via: SIP/2.0/UDP 188.254.68.66:9298;branch=z9hG4bK-6110d60075a24c0f-a3c000c-1
Call-ID: isbc6994325518768294927-1385194135-11717
From: [email protected];user=phone>;tag=sbc09106994325518768294927
To: ;tag=27BA64-1DAE
CSeq: 1 ACK
Max-Forwards: 70
Content-Length: 0
show run:
voice service voip
ip address trusted list
ipv4 87.226.136.164 255.255.255.255
ipv4 172.16.24.0 255.255.255.0
ipv4 188.254.68.66 255.255.255.255
ipv4 188.254.68.67 255.255.255.255
ipv4 188.254.69.66 255.255.255.255
ipv4 188.254.69.67 255.255.255.255
ipv4 46.38.52.68 255.255.255.255
address-hiding
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
no supplementary-service sip moved-temporarily
no supplementary-service sip refer
redirect ip2ip
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback cisco
sip
voice class codec 1
codec preference 1 g729br8
codec preference 2 g729r8
codec preference 3 g711alaw
codec preference 4 g711ulaw
voice class codec 2
codec preference 1 g711ulaw
codec preference 2 g711alaw
codec preference 3 g729r8
codec preference 4 g729br8
voice translation-rule 1
rule 1 /XXX5397962/ /1999/
voice translation-rule 2
rule 1 /XXX55317577/ /1999/
voice translation-rule 3
rule 1 /5555317884/ /1999/
voice translation-profile ROS
translate called 1
voice translation-profile ROS2
translate called 2
voice translation-profile ROS3
translate called 3
interface FastEthernet0/0
ip address 178.208.129.221 255.255.255.248
ip access-group INBOUND in
no ip unreachables
ip verify unicast reverse-path
ip nat outside
ip inspect IPFW in
ip inspect IPFW out
ip virtual-reassembly in
duplex auto
speed auto
no cdp enable
interface FastEthernet0/1
no ip address
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
interface FastEthernet0/1.1
encapsulation dot1Q 1 native
ip address 10.110.0.200 255.255.255.0
ip nat inside
ip virtual-reassembly in
interface FastEthernet0/1.2
encapsulation dot1Q 2
ip address 172.16.24.254 255.255.255.0
ip nat inside
ip virtual-reassembly in
h323-gateway voip interface
h323-gateway voip bind srcaddr 172.16.24.254
ip dns server
ip nat inside source list NAT interface FastEthernet0/0 overload
ip route 0.0.0.0 0.0.0.0 178.208.X.X
ip route 192.168.0.0 255.255.0.0 Null0 254
sccp local FastEthernet0/1.2
sccp ccm 172.16.24.101 identifier 1 version 7.0
sccp
sccp ccm group 1
associate ccm 1 priority 1
associate profile 1 register XCODE123456
keepalive retries 1
keepalive timeout 10
switchover method immediate
switchback method immediate
dspfarm profile 1 transcode
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec g729r8
codec g729br8
maximum sessions 6
associate application SCCP
dial-peer voice 10000 voip
tone ringback alert-no-PI
description ROSTELECOM Incoming
translation-profile incoming ROS
destination-pattern 74955397962
session protocol sipv2
session target ipv4:87.226.136.164
session transport udp
incoming called-number XXXX5397962
dtmf-relay rtp-nte
codec g711ulaw
dial-peer voice 10010 voip
tone ringback alert-no-PI
description ROSTELECOM Incoming
translation-profile incoming ROS2
destination-pattern XXX55317577
session protocol sipv2
session target ipv4:87.226.136.164
session transport udp
incoming called-number 75555317577
dtmf-relay rtp-nte
codec g711ulaw
dial-peer voice 10020 voip
tone ringback alert-no-PI
description ROSTELECOM Incoming
translation-profile incoming ROS3
preference 1
destination-pattern 5555317884
session protocol sipv2
session target ipv4:188.254.68.66
session transport udp
incoming called-number 5555317884
dtmf-relay rtp-nte
codec g711ulaw
dial-peer voice 10021 voip
tone ringback alert-no-PI
description ROSTELECOM Incoming
translation-profile incoming ROS
preference 2
destination-pattern 5555317884
session protocol sipv2
session target ipv4:188.254.69.66
session transport udp
incoming called-number 5555317884
dtmf-relay rtp-nte
codec g711ulaw
dial-peer voice 2 voip
tone ringback alert-no-PI
description to CUCM_PUB
destination-pattern 1...
session target ipv4:172.16.24.101
voice-class codec 2
dtmf-relay rtp-nte
I see in the debug that the itsp over g729 family codecs but not g711 at all
This system was working with this dialpeers before with same provider ,just i have added the dial-peer 2 .
I have changed the codec to match what is offered by itsp but no difference,still getting the same message.
PLZ help ASAP.

Sharing Files between Mac and PC over a Network

Greetings,
I have recently made the switch to the Mac, and I have been so pleased with it ever since! I am getting married soon and my wife-to-be has a Windows XP desktop machine. I have been reading up on the different options on sharing files, and I want to ask if someone with experience can confirm what I think I have discovered.
1. A person on Windows can read and/or write to a Mac OS X formatted drive only if they run Macdrive.
2. A person running Windows XP can read files stored on a shared folder on the Mac through network sharing without additional software. But can they write to the shared volume on the Mac??
Now, I know all about the Mac side of things. It can read NTFS, read/write to FAT/FAT32, connect to Windows computers...etc. I have actually done all these things already, and know how to use them. I just want to make sure that I have the right idea before I go into working in the other direction, from Windows to Mac.
Thank you for any help that you might offer.

1. A person on Windows can read and/or write to a Mac OS X formatted drive only if they run Macdrive.
You don't need Macdrive for sharing files over the network, macdrive is only needed for a PC to read a Mac formatted Hard drive that is directly connected to a PC i.e Firewire Drive.
2. A person running Windows XP can read files stored on a shared folder on the Mac through network sharing without additional software. But can they write to the shared volume on the Mac??
Yes you can write to a windows sharepoint on a mac this would be limited to their home folder unless you setup other permissions.
To setup windows sharepoints your best using a shareware utility called sharepoints
Now, I know all about the Mac side of things. It can read NTFS, read/write to FAT/FAT32, connect to Windows computers...etc. I have actually done all these things already, and know how to use them. I just want to make sure that I have the right idea before I go into working in the other direction, from Windows to Mac.
It does not matter what format hte pc drives are if your sharing over a network you only need to know about formatted drives if they are directly connected to the computer i.e firewire, or usb drives.

Has anybody built a BERTS generator and detector over a network?

I'm using LabView 7.0 and I was wondering if anybody had developed a BERT's generator and Detector using LabView 7.0. I will be using it over a TCP/IP network.

Hello,
I�m not exactly sure what your application is but here are the two paths I can see:
1) You�d like to do BERT testing on a data set. This data set is transferred to the PC via TCP/IP. In this case I would suggest using the standard TCP/IP VIs that are included with Labview 7.0 to transfer the data. These VIs are located in the following location on the Function Palette: �All Functions -> Communications -> TCP.�
There are also examples for using the TCP/IP VIs at the following location in the NI Example Finder: �Networking -> TCP & UDP�
Once this data is collected you could perform BERT on the data set using the Modulation Toolkit:
http://sine.ni.com/apps/we/nioc.vp?lang=US&cid=12855
2) You�d like to do BERT testing on the actual TCP/IP traff
ic that�s going by on the Ethernet segment your PC is attached to. The TCP/IP data that is received by Labview and most other TCP/IP applications has already had data packets with errors in them removed and retransmitted by the networking card and/or the operating system, so the data you would see from Labview shouldn�t have any errors in it. To get the raw data from the Ethernet segment would require low-level Windows API calls and/or access to the networking card driver itself.
Hope this helps! Let me know if there is anything I can help with or clarify.
Ken S.
National Instruments

Ufsdump and restore over a networks

hi im a beginner of unix i want to know how to dump a workstation root and home partition in the server in the network or different location using ufsdump command inorder to restore it in a defferent location using ufsrestore command..im using nfs and solaris 8.because this is my problem our workstation is working and the other workstation got broken and i want to dump a working workstation not physically connect the hard disk in the working workstation..i will dump it in my office.over a network
please help me..this is useful for me cause this is always happen when workstation have powerfailure or not shutdown properly..
thnks

Create two shares on the nfs server and share it out across the network.
On the workstation that you want to use as your ufs image, mount that share point on the workstation, say /restore_root and /restore_home
mount nfs_server:/share_dir /restore_root
mount nfs_server:/share_dir2 /restore_home
Issue the following command (the assumption is that root is on slice 0 and home is on slice 3)
ufsdump 0f - /dev/rdsk/c0t0d0s0 | (cd /restore_root;ufsrestore xf -)
ufsdump 0f - /dev/rdsk/c0t0d0s3 | (cd /restore_home;ufsrestore xf -)

Record video interview and post over 3g or WIFI

I am looking into using my 64g 3g iPad 2 for news gathering in the field for quick interviews and uploading to our website. Will it fit the bill? What is best way to plug eg: shotgun or lav wireless mic into iPad. What about the new Apogee "Mike' mic? I have the Blue usb mic. Should i get the 5 in one adapter that is one the market?
I do have a Panasonic P2 170 camera but i am thinking of the times when a spontaneous inteview may happen and i don't have my gear with me. Changes are I will have my laptop and iPad with a small mic eg: "Mike". The blue is somewhat big. any ideas. Too bad I am hearing the cams on iPad 2 are not very good. Sad

When did the problem start? Check to make sure you have data delivery set for "over mobile network" >
Menu / Settings / Battery & Data Manager / Data Saver / Enable Data Saver (NOT checked)
and ..
Menu / Settings / Battery & Data Manager / Data Delivery / Data Enabled (checked)
Message was edited by: Cody21 - NOT checked for Enable Data Saver

Emailing and synching over GSM network (i.e. without wifi)

My new iPhone emails no problem with WiFi but does not seem to without the Wifi. Do I need to change the settings?
I also want to synch my contacts and calendar and iTunes (podcasts) the same way.... Is that the same issue or should I adjust somethings else for that?
Thanks for the help!

Most likely you are using your home wi-fi, and your email account provider doesn't allow SMTP access when not on their network. Accounts like Gmail do. As a workaround, send email using AT&T's SMTP server - go to Settings > Mail, Contacts, Calendars > tap the account > SMTP > tap the AT&T SMTP server under Other SMTP servers, and toggle it ON.
You cannot sync iTunes content 'over the air'. You can sync contacts/calendars 'over the air' with a MobileMe account or a Google Sync account, or via MS Exchange (corporate email).

Assign wifi for internet and Lan1 for internal network

I have a lan connection to my office which it has access to internet by proxy and I have wifi to access directly to internet
How can I assign wifi just for access to the internet and Lan just for internal net work?
By any chance is there any way to assign for example mail to get internet from wifi and the rest of the application use Lan for connection to internet ?

not sure if I understand you correctly
but many people use airplay mirror to mirror apps streaming movies and music from the Internet connection the device have
be it from a internet connection the device is currently airplaying to is of no relevance
but the device can't get data from both 3g and wifi at the same time
not even a computer can do that, it use it's metric settings to only! get data from the fastests source

Routing and Remote access - internal network not accessing internet through public network!

Hello,
Good Evening to all.
I got an issue in routing and remote access on windows 2003 server. This server is already configured as File server, domain server and Application server. Also configured as router (through routing & remote access) for connecting three different
network to each other. So This server has three NIC card installed and each NIC card represent separate network.
three different network are - 192.42.160.0/24 , 192.42.161.0/24, 192.42.162.0/24
Three NIC card installed on server as with following IP address -
NIC -1 = 192.42.160.220 , Sub- 255.255.255.0 , Gateway - NO
NIC -2 = 192.42.161.220 , Sub- 255.255.255.0 , Gateway - 192.161.220.112 (This ip for internet access so 4g router IP)
NIC -3 = 192.42.162.220, , Sub- 255.255.255.0 , Gateway - NO
Now the issue is I can reach to internet & (also pinging to router ip 192.42.161.112) from only one network that is - 192.42.161.0/24 , BUT when I trying to access internet from another two network (192.42.160.0/24 & 192.42.162.0/24) I cant access
it and moreover can't ping to internet router ip - 192.42.161.112...
So how I can access to internet from other two network also?
I was already configured static routing for all three network but still I was not success. really I don't know what exactly static routing it should be done in routing & remote access so that all three network can reach to internet?
Sorry if I am not able to explain properly. Please let me know if you need more explain on this...
Thanks to all.

Dear Milos,
I am happy to hear from you....
1.- Actually the setup was done long before by another guy and right now I don't want to change it.
Nice to hear from you! Thank you so much. Actually this is first time I am using technet forum upon the suggestion from one of the my friend. So any your help from you will help me a great in this issue...
I ran the route print command and given follow are the results.
I have only added the default route as per the below routes. Please guide me know how to add other static routes for three network.
D:\Documents and Settings\Administrator>route print
IPv4 Route Table
===========================================================================
Interface List
0x1 ........................... MS TCP Loopback interface
0x2 ...00 30 05 ad 8f 5c ...... Broadcom NetXtreme Gigabit Ethernet - Teefer2 Mi
niport
0x3 ...00 0e 0c a7 c4 f8 ...... Intel(R) PRO/1000 GT Desktop Adapter - Teefer2 M
iniport
0x4 ...00 0e 0c a7 c5 85 ...... Intel(R) PRO/1000 GT Desktop Adapter #2 - Teefer
2 Miniport
===========================================================================
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.42.161.112 192.42.161.220 1
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
192.42.160.0 255.255.255.0 192.42.160.220 192.42.160.220 20
192.42.160.220 255.255.255.255 127.0.0.1 127.0.0.1 20
192.42.160.255 255.255.255.255 192.42.160.220 192.42.160.220 20
192.42.161.0 255.255.255.0 192.42.161.220 192.42.161.220 20
192.42.161.220 255.255.255.255 127.0.0.1 127.0.0.1 20
192.42.161.255 255.255.255.255 192.42.161.220 192.42.161.220 20
192.42.162.0 255.255.255.0 192.42.162.220 192.42.162.220 20
192.42.162.220 255.255.255.255 127.0.0.1 127.0.0.1 20
192.42.162.255 255.255.255.255 192.42.162.220 192.42.162.220 20
224.0.0.0 240.0.0.0 192.42.160.220 192.42.160.220 20
224.0.0.0 240.0.0.0 192.42.161.220 192.42.161.220 20
224.0.0.0 240.0.0.0 192.42.162.220 192.42.162.220 20
255.255.255.255 255.255.255.255 192.42.160.220 192.42.160.220 1
255.255.255.255 255.255.255.255 192.42.161.220 192.42.161.220 1
255.255.255.255 255.255.255.255 192.42.162.220 192.42.162.220 1
Default Gateway: 192.42.161.112
===========================================================================
Persistent Routes:
None
Regards & Thanks
Mahesh

ICal / MobileMe To Dos & iPhone syncing over mobile networks: Solution!!!

I have been after a solution to use the to do list in iCal on my Mac @ home and the MobileMe Calendar web page while at work & away from home AND have it sync OTA with my iPhone. There hasn't been a solution that I have found for this until now! I have tried Things and OmniFocus, but in my opionion they are both too bloated for my needs. I want a simple todo list with due dates, notes, priorities and URLs, that I can use on desktops as well as mobile. The iCal / MobileMe to do list is perfect for this, but until now there hasn't been a way to keep the same todo list on my iPhone and keep it in sync everywhere.
I now have a solution. Appigo recently launched a beta of their iCal Sync app for OSX. I downloaded & installed this to my Mac at home, and downloaded their iPhone Todo app. Great syncing between iCal and iPhone over my home Wifi network. Then, I thought, what is to stop me using this over the internet when I'm not at home? So I setup a domain with no-ip.org, which allows you to point a domain name at your home DSL router IP address and have it forward traffic to your home computer. Using a DNS solution in this way means you can dynamically update the domain name to change when your router public IP address changes (unless you have a static IP assigned with your ISP). So, anyway, I set this up to point at my router's public IP address, then configured my home router to forward a specific TCP port to my Mac. So when traffic arrives at the router from the internet destined for this specific port, the router forwards it to the Mac. I configured the Appigo iCal sync app to listen on a static port (the same one I configured on the router) and ensured both my Mac and router firewalls were set to permit this traffic.
So now, with MobileMe set to sync automatically, I can add/edit/delete a todo on my iPhone when I'm away from my home wifi network and it instantly syncs with iCal on my Mac at home, then that gets propogated almost instantly to MobileMe. Also it means a change to the todo list on my Mac or on the MobileMe Calendar web page will also almost instantly get propgated to my iPhone (next timne the Todo app syncs).
Brilliant! The perfect solution for me, and only costing the price of the Appigo todo iPhone app!
If anyone would like more detail on how this was all done, let me know and I can go into more detail.
Just need to find something similar for note syncing now, and I'll be sorted.

Thanks for the excellent information on Appigo ToDo and Sync. This is great way to fulfill the unexplainable absence of this feature from Apple's own application suite (MobileMe, iCal, To Do items).
I downloaded Sync and the iPhone app. Configuration was a snap. I'm still working from a trial membership of MobileMe...with this feature working I'm just about ready to pony up and get a full membership.

Filling iShuffle over a network connection - possible?

Hi, my wife and I have a Mac and a PC. My Music files are on my Mac and her music files are on her PC. She likes to listen to my music via a shared connection to my Mac (we set up sharing in iTunes on her pc in order to do this). What we are wondering is can she load up her iShuffle with shared songs from my music library on my Mac over the network via her PC? In other words, she not only wants to be able to plug her iShuffle into her PC and fill it up with songs from her own library (located on her PC) but also with songs from my library (located on my Mac) over a network connection. We don't want to have to transfer all of my Mac song files to her PC - that would seem like a waste of space and a bit redundant. So, is it possible to fill and iShuffle over a network connection?
Thanks,
John
Dell XPS M140 and Mac Mini Mac OS X (10.4.8)

Hi, my wife and I have a Mac and a PC. My Music files
are on my Mac and her music files are on her PC. She
likes to listen to my music via a shared connection
to my Mac (we set up sharing in iTunes on her pc in
order to do this). What we are wondering is can she
load up her iShuffle with shared songs from my music
library on my Mac over the network via her PC? In
other words, she not only wants to be able to plug
her iShuffle into her PC and fill it up with songs
from her own library (located on her PC) but also
with songs from my library (located on my Mac) over a
network connection. We don't want to have to transfer
all of my Mac song files to her PC - that would seem
like a waste of space and a bit redundant. So, is it
possible to fill and iShuffle over a network
connection?
In my experience, no...

I would like to sync iphone 5S with OUtlook 2010 over wireless network

Hi all,
I need to sync an iPhone 5S with Outlook contacts and calender over internal wireless network.
I have just setup a new iTunes account and have iCloud installed on a Windows 7 machine.
Thanks.

You need to configure iCloud on the iPhone first then the Windows 7 PC...
https://www.apple.com/icloud/setup/ios.html

How to share iPad Photos and iMac iPhoto via network?

I've recently added an iPad 2 to my Apple system. Can anyone tell me how to access my iMac's iPhoto library (OSX 10.7.2) with the iPad 2's Photo's app (or other app) via my Apple Extreme home network? I'm running iOS 5 on the iPad.
It's clearly possible (and I've done it) to share iPhoto libraries between computers running OSX and iPhoto over my network. On my iMac, iPhoto Preferences>Sharing opens a window with clear options to enable this service:
However, I have yet to find the app on the iPad 2 which will perform the same function so I can link libraries between my desktop and my iPad. Is there one, or a third party app for this?
Thanks

In general the simplest way would be to store the document in iCloud, and use iCloud to access the document from both your iMac and iPad.
But your post above says you're running Snow Leopard (OS X 10.6.4). Snow Leopard is now two years old. I'm not sure it supports iCloud.

Fax over the network with HP LaserJet 400 ColorMFP M475dw

Hi there, I was trying to send fax over the network with HP LaserJet 400 ColorMFP M475dw, I have connected the printer/scan/fax on a wired network, just have 3 computers on it, all of them can scan or print. But I can't find any option to just FAX from Microsoft Word or Adobe Acrobat Reader, going to File ---> Print ---> and select M475dw "FAx", I installed the lasted version of the drivers downloaded from hp.com and there's no way to install this multifunction printer as a FAX.
So I can't see the FAX on Printers in the control panel of windows.
I have never got an error message from any computer during the installation process either.
Does anyone has an idea of what to do here?
Thanks ahead.

Thanks for your quick answer, I really appreciate it. But unfortunately, it didn't resolve my problem
Actually any of the workstations after complete the installation (with the last version of drivers downloaded just now from hp.com) can't recognize the HP LaserJet Pro 400 Color MFP M475dw, as a fax. I can print and scan over the network, or connecting the printer with a usb cable. I just can't see the icon "HP LaserJet Pro 400 Color MFP M475dw FAX" in Control Panel ---> Devices and Printers. I did a full installation when I were asked during the installation process... I did then I custom installation and neither of them seems to work to me
This is very strange, it never happened to me with any other models of all-in-on (printer/fax/scanner)

Sound problem while transimission over the network by using JMF API

i had done an application which transmit audio and video over the network by using JMF API in JAVA. All my application work very well but i have a problem with the sound while i transmit it. this sound has a very bad quality (i am using AVReceive2.java) .
has anyone an indication or solution for my problem
it's very urgent, please help me.
regards
sar

you can try modifing de Capture example from JMF Solutions.
change this function:
public int startCapture() {
     int result = -1;
     enableComponents(false);
     buttonStart.setLabel("Pause");
     buttonEnd.setEnabled(true);
     startMonitoring();
     try {
processor.start();
DataSource clone = Manager.createCloneableDataSource(datasource);
     MediaLocator ml2 = new MediaLocator("file://capture.mov");
System.out.println("Content Type " + clone.getContentType());
datasink = Manager.createDataSink(processor.getDataOutput(), ml2);
     datasink.open();
datasink.addDataSinkListener(this);
     datasink.start();
result = 0;
     } catch (Exception e) {
     System.err.println("DataSink Exception " + e);
result= -1;
Regards.
Fernando

E7-00 and SIP over Internal Network (WiFi)

Similar Messages

Maybe you are looking for