E7-00, email, how to change outgoing server?

Greetings everyone,
I can not find where to change the in- or outgoing server addresses for an email that is already set up. I am using the default emailclient that came with the Nokia E7.
Anyone knows where I can change this?
The regular settings for the account does not include the above mentioned options.
Is the only way to change this to delete the account and setup a new one?
Thank you for your help already in advance,
Jan

Well I go into menu, chose Email and then go like this !
From Menu to Email
Then follow the sequence !
Hope this helps
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution' 

Similar Messages

  • How to change default Server NFS version in Solaris 10 ?

    How to change default Server NFS version in Solaris 10 ?
    I need to change default version of NFS server version, currently i have NFS_SERVER_VERSMAX=2, for changing NFS version i changed this variable in /etc/default/nfs, but still its using version 2,
    Please let me know where else i need to change./
    Thanks a lot in advance!!!

    Did you change the /etc/default/nfs on the server or on the client?
    What is NFS_SERVER_VERSMIN set to? The NFS server is allowed to use any version in the span of NFS_SERVER_VERSMIN and NFS_SERVER_VERSMAX.
    NFS_SERVER_VERSMAX=4
    The default of NFS_SERVER_VERSMIN is 2.
    And, as mentioned, you will have to restart your NFS server for changes to take effect.
    .7/M.

  • How to change ASE server name in windows

    how to change the server name in Adaptive server enterprise running on windows

    Windows is going to require a few more steps if ASE is running as a service.
    Update all registry entries containing <servername> with <newservername>:
    HKLM\SOFTWARE\SYBASE\Server
    HKLM\SYSTEM\CurrentControlSet\Services\SYBSQL_<servername>[ _BS | _XP ]
    NOTE: Doing a registry search on <servername> will bring up a ton of other locations, eg, legacy entries, ControlSet00X, etc ... not sure if all of these have to be changed, too ...
    NOTE: Haven't installed any of the latest ASE packages in windows so don't know if SAP's gone an changed the HKLM\SOFTWARE sub-branch name from SYBASE to SAP
    =========================
    In addition to Ryan's notes:
    - any other sysservers entries that refer to the old servername (eg, loopback)
    - any remote servers would need to update their external/remote logins, remote servers and/or proxy definitions ... as appropriate
    - if the ASE is involved in replication then you're looking at whole 'nother can of worms ... off the top of my head ... rs_databases, rs_idnames, rs_repdbs ... and of course any repdefs/subs that include the ASE name ?
    - obviously (?) any monitoring/maintenance/operational jobs ... documentation ...

  • How to change web server from inbuilt Tomcat to IIS in already configured Cold Fusion 10

    how to change web server from inbuilt Tomcat to IIS in already configured Cold Fusion 10

    You just need to run the Web Server Configuration Tool to connect ColdFusion to IIS.  It can be found in the ColdFusion program group off of the Start menu.  Be sure to run it "As Administrator".
    -Carl V.

  • TS3899 I want to use my AAPT server but my iPad insists on my outgoing server being big pond even when I clearly type AAPT. How can I change outgoing server to be AAPT. Thanks.Jack

    Trying to set up my iPad for mail and despite my clearly writing my outgoing server as AAPT it changes itself to big pond by default and so I can't send or receive . How do iI get the system to accept AAPT as my outgoing server? Help please
    Jackfromqld

    I am trying to figure out what you said, but I haven't a clue. Can you be much more explicit about what your issue is?

  • TS3276 email won't send or close when cannot send message error shows and won't change outgoing server as requested.

    email freezes when "cannot send using ------ server" comes up even when I change server settings.

    How are you trying to change the server?

  • How to select outgoing server automatically?

    The code below is part of Apple Mail templates. Where you see the "Trial", this is a code that automatically writes Trial into the subject line of an email when using this template.
    I have several accounts with outgoing servers. How can I put in the code below that it selects a given outgoing server that I want to pre-set?
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Background Images</key>
    <array>
    <string>bg_pattern.jpg</string>
    <string>bg_letter.jpg</string>
    </array>
    <key>Folder Name</key>
    <string>INR.mailstationery</string>
    <key>HTML File</key>
    <string>content.html</string>
    <key>Headers</key>
    <dict>
    <key>Subject</key>
    <string>Trial</string>
    </dict>
    <key>Images</key>
    <array>
    <string>top.jpg</string>
    <string>bottom.jpg</string>
    </array>
    <key>Stationery ID</key>
    <string>A978C3B3-4E0A-4045-9759-EF0690326CA8</string>
    <key>Thumbnail Image</key>
    <string>thumbnail.png</string>
    </dict>
    </plist>

    I don't think it can be don in this plist, but I think you can enable only one outgoing server in Mail, or set a default.

  • How to change Report Server 10.1.2 from GMT to EST

    We have the 10.1.2 Oracle Application Server up and running but the time on the Report Server is GMT. How can the time be changed to EST? Oracle suggested changing a value in a parameter file and a Windows environment variable, neither of which worked. Now, they are saying reinstall the Web Server. Is there any other way? How is this set during the install?
    Thanks,
    Dave

    hi
    it was better if you created table first.
    now create table for your server name and use select into statment.
    and after this if any happend you will be able to change the server name easily by
    modifying table.
    hope this helps u.
    sarah

  • How to change Report Server Name???

    How can I change my reports server name which is normally generated according to Server Name_OracleHome combination. But can I use a different name for my report server and which configuration files I'll have to change???

    How can I change my reports server nameSee Paulo Esteves answer in How to change the Report Server Name?

  • Married and changed username/email, how to change new username on iPod and keep previously purchased songs to new id

    Got married and changed username/email, how do I change username to new one and can I still keep previously purchased songs on same playlist?

    That is covered here.
    Frequently Asked Questions About Apple ID

  • How to change the Server email sender's name

    We send email alerts from B1, but when they come from the system they go out with the return address of the email placed in the company details e-mail adress. This is OK but the Name that goes to the recipient says 'Server', Is there any way to change this? We want it to be something the recipient will see as coming from SAP so they don't junk the email.
    Thanks

    You may check this thread:
    SBO MAILER
    Thanks,
    Gordon

  • How to change a Server with DC role to a member of a DC

    Dear All,
    I have a Server which is connected on the Local Network.
    My server consists of 5 VM's.
    I would like to make my Host Machine a DC and the all the VM's as the member of this Host DC. (I can do this...No Problem)
    What I am worried about is, Later If I need to add my Host Machine Dc as a member of DC
    of Local Network Domain Controller.
    This means If i need to change the role of my DC to the role member of another DC! 
    Is it Possible? If possible then how to do it.
    Thankyou and Regards,
    Ahmed

    Hi Ahmed,
    Thanks for your reply.
    Since your questions are related to Hyper-V, I am sorry to say that I am not an expert for Hyper-V. I recommend you to ask in Hyper-V forum below and you will get professional assistance there:
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?category=windowsserver&filter=alltypes&sort=lastpostdesc
    Best regards,
    Susie
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • How to change WebLogic Server username and password ?

    Hi,
    As per this url Modify users . It says In the left pane, select Security Realms. But I did not find the SECURITY REALMS, I mean where is it located ?. Besides The following page http://192.168.100.11:7001/index.jsp also get open. Also the WEBLOGIC server login page opens as well here is the url  http://192.168.100.11:7001/console/login/LoginForm.jsp
    but when I type the given password it does not login.   It gives the following messages
    Authentication Denied
    The username or password has been refused by WebLogic Server. Please try again.
    Please help

    It says following even after giving the correct one. In the left pane, select Security Realms. Where is Security Realms is located ? How to get there ? so that i can change the password again as mention in this url Modify users
    Authentication Denied
    The username or password has been refused by WebLogic Server. Please try again.

  • I changed my old email to a new one with a new password to give me anew apple ID but now I cannot get into my ITunes account as it has my old email.How I change it to my new ID

    I changed my email and password for my AppleID but now I need to change it on my ITunes sign in.How do I do this.Help this is very frustrating.

    Click on that Apple Id and then Sign out from that Apple Id and try to Sign In with your New Apple Id and see if that works.

  • How to change the server CLASSPATH

    Hello,
    I am using OracleAS 10g (9.0.4.0) and I need to reference a properties file from my application which is stored in a folder outside the OAS installation folders. For that reason I want to add this "external" path to the CLASSPATH that the server uses (I don't want to change my application's CLASSPATH but rather change the CLASSPATH that all applications use). Can someone tell me how can I achieve this? For example in Weblogic I can do this by changing the startup.sh script that starts the server. Is there something similar in OAS? Thank you.
    Panos

    Hello
    You can create libraries, that allows you at the application or OC4J instance level to specify which jar/classes files will be loaded, take a look to the documentation
    I am encouraging you to read the paper "Classloading in OC4J". (note that this paper is valid for 10.1.2 or early and not valid for OC4J 10.1.3 where the class loader mechanism has been updated)
    Tugdual Grall

Maybe you are looking for

  • Windows 7 x64 / DM 6.0 b47 - DM hangs on exit

    Hello! I am running Windows 7, 64-Bit, with all of the latest updates and patches.  I also have downloaded and installed the latest version of Desktop Manager 6.0 (b47). DM seems to work fine - I can launch it, use it, connect to the Blackberry, sync

  • Somewhere in Spice Works it is pinging my domain

    The alert tells me that domain name abcdef.com is not responding to HTTP or ping. I believe I know what the issue is but I cant find where the config/setting is for this in Spice Works? Any direction is appreciated. Thanks. This topic first appeared

  • Reboot

    My MacBook Pro won't power up. Is there a way to reboot from harddrive?

  • Run a large audio file in application

    i tried the code available for the audio file there was a problem i could'nt run the code with a 5.5Mb ".wav" file thanking you

  • Invisible 4 Gig file I cant find

    This might be the wrong forum, but most people here know their business. I used the program "Screen Mimic" witch is a screen capture program(http://www.decimus.net/ScreenMimic.php). I saved the .mov file to an external firewire drive. As it was rende