E7-00 - Upgraded to Belle - can't configure e-mail...

I downloaded the latest Nokia Suite today, and upgraded to the Belle-version, but afterwards I cannot get my e-mail account configured and available. Any tries end up with "Cannot connect the e-mail server". Hint?

Hi jtbe7,
Welcome to Nokia Support Discussions!
Make a soft reset on your phone, by dialling *#7780#, followed by your security code (the default security code is 12345, unless you have changed it). This will reset all settings to their factory defaults, including the email client and all accounts you've added. After the reset, set up your email account again by following these instructions:
Go to Menu > Mail > New mailbox.
Select Email provider from the list
Enter your email address and password, select OK.
The mailbox is created.
The following email service types can be set up:
Exchange ActiveSync (for corporate email)
Hotmail or Gmail using ActiveSync
Direct POP/IMAP connection to email server
All the mailboxes can be accessed in a single location in Menu > Mail or via Inbox on the home screen widgets.
If your email service is not found in the list, select Other and enter you email address and additional info if requested. You can change settings later by by selecting Menu > Mail > Settings > (mailbox name). The incoming and outgoing mail server settings can in this case be found in Mailbox settings > Advanced mailbox settings.
Let us know if this helps!
Puigchild
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Similar Messages

Since I upgraded memory, I can't retrieve/send Mail. Also can't remember password. I'm a mess! Help!!

Since I upgraded memory, I can't retrieve/send Mail. Also can't remember password. Need HELP!!

Upgrading to firefox 5 and updating my plug-ins helped a bit. Frog is less 'sticky' now, but it's not solved the problem. Java needs to be up to speed or the frog goes into stasis....

HT1277 How many mail accounts can I configure in "Mail" on my mac book pro ?

Im trying to open multiple mail accounts in "Mail" but am unable to. How many mail accounts can I configure ?

http://support.apple.com/kb/TS3276
http://support.apple.com/kb/HT1277
http://www.apple.com/support/macosx/mailassistant/
should be as many as you want
http://www.dummies.com/how-to/content/adding-a-new-mail-account-in-mac-os-x.html

I can't configure yahoo mail on my iphone

i find it impossible to sign on my yahoo mail on my iphone 3GS,I find it difficult to get to apple mail server, can some one help me to configure yahoo mail on my iphone ?
i usually gey 'apple.mail.yahoo.com' not responding

well usually the easiet method is Settings/Mails,contacts/add a/c /select yahoo/enter your email id and password and thats it,if the info entered is correct the yahoo server will verify the info and tell you it is successfull.. good luck

How can I configure Mac Mail to use the correct SMTP server?

I have successfully set up Mac Mail to use a new e-mail account. Inbound and outbound mail is working just fine. However, I am seeing something odd when I create a new message or reply to an existing message. The outbound account that shows is not that which has been configured for the account. I can manually select the correct outbound account.
What are my troubleshooting steps?

One of the first things to check in Mail Preferences, Composing:

How to Configure E-mail and Chat functionalities

Dear all,
How to configure E-mail and Chat functionalities for IC Webclient.
through IC Webclient ICI interface how can we configure E-mail functionality, As per my understanding, E-mails can be handled in a similar way of receiving phones.
Where these E-mails can be stored?, Where we define agent E-mail id?
being ICI is a multi channel support does it need SMPT server support? If No, would there be any difference in the functionality?
How does CHAT functionality works?
Please educate in above scenarios to get a better understanding.
Your help will be highly appreciated.
Best wishes
Raghu ram

Do you make any effort to search for your answers before you post your questions? ERMS is the email response system
The 2nd post on this board - Documentation for Interaction Center (IC) WebClient
There is tons of stuff here to answer your questions as well as show you the configuration. You need a 3rd party CTI solution to do chat that you will read about in the blog.
SAP Notes
759923 Frequently Asked Questions about IC WebClient
940882 Frequently Asked Questions about ERMS
882653 Frequently Asked Questions about Agent Inbox
1114557 SAP CRM 2007 Internet Browser Releases
1118231 Supported user interfaces for SAP CRM
981710 Support for Microsoft Internet Explorer 7.0
1144511 Blank screen when starting CRM WebClient or IC WebClient
1115493 CRM Web UI: Mandatory SICF services for CRM framework
992848 Mandatory ICF nodes for CRM WebClient UI Framework
IC WebClient Consultant Cookbook for CRM 2005
Online Documentation
Online Knowledge Products
Blog: How to Configure Contact Center Simulator User Interface (CCSUI)
Blog: What is Computer Telephony Integration (CTI)

Suddenly can't receive e mails on iPhone 4gs

did the recent software upgrade and now can't receive e mails to 4gs. can send them. deleted and restored yahoo e mail account
but has't worked

I had connection to my email last night when I went to bed. When I woke up this morning, my "hotmail" account wouldn't connect to the server. My other emails are fine but I cannot get my email to connect to the server. I called microsoft and asked and my email works on my computer but it's the strangest anomaly that my email of all days stops working now. I need it so bad to do work. I've already tried deleting the email and resetting it up twice but I just don't know what to do.
Thanks,
John

Configuration of Mail

Hi there,
Since I got the Maverick's update, I can't configure my Mail account(s)... I tried with my Yahoo! one and my Hotmail one, but each time I got a "an unknown error has occurred" message. Any idea of how I can fix this? (before the update all was working perfectly...)
Thanks!

The one that is in the uppermost left part of the screen when it is in portrait. The button changes names depending on what screen you are in.

After iPad ios 5 upgrade, itunes "interrupted while restoring" restore gets error -50. iPad starts in 'configure' mode - can I configure as 'New iPad' and then restore?

After iPad ios 5 upgrade on Win7 64bit pc (x386 iTunes), iTunes gave me error "iTunes was interrupted while restoring, restore again now?" I try to restore but iTunes immediately gives error -50. Apple website says -50 is a timeout, but I have tried all fixes: changed usb ports, new cable, reset iPad, restart pc, remove sim... no good.
iPad starts in 'configure' mode, but won't restore from any of the several iTunes backups I have. Ready to giveup on 'restore'! iPad is sync'ed in iTunes, connects and syncs ok, so I don't want to lose that info.
Can someone from Apple advise - can I 'configure' as 'New iPad' and then restore or sync to recover my Apps and data etc? OR if I 'Restore' from iTunes 'Summary' tab, will I still be able to Sync to restore the iPad Apps and data?
I'm seeing a lot of frustrated Apple users online, hoping that a fix for this problem will help a few of us!! An iOS upgrade should not cause this much pain and wasted effort.

You might already have tried all of these, but just in case:
1. Make sure you have the latest version of iTunes.
2. If you're on a Windows PC, consider uninstalling iTunes and Quicktime, restarting the PC, then reinstalling. This sometimes fixes oddities.
3. Make sure you have no firewall or anti-virus running/active.
4. Try different USB cable; if you're using a cable via a hub, try connecting without the hub. On desktop PCs, the direct (non-internal-hub) USB sockets are usually at the back.
5. If yoiu haven't already done so, download the iOS5 update via the direct links I posted above
6. If using Update doesn't work, use Restore. Option-click (Mac) or Shift-Click (Windows) the Restore button in itunes.
7. Before you to the Restore, right-lick the entry for your device in iTunes and choose Backup from the drop-down menu. You may need this backup later.
If you're srtuck in recovery mode:
- There are some tips here for Windows users
http://thehowto.wikidot.com/ipad-stuck-recovery-mode
- If your device is stuck in Recovery mode, you can try putting it into DFU mode, from which iTunes should be able to Restore, as above. Details here:
http://www.tipb.com/2010/12/02/tip-put-iphone-ipad-dfu-mode/
- This link points to a utility that can help (Windows and Mac)
http://runningblind.com/post/2800674985/ipad-stuck-in-recovery-mode-for-no-reaso n
I hope something here helps

Can't configure OfficeExtend

I just bought an Aironet 600 OfficeExtend AP and hooked it up to my WLC 5500 but I can't configure it.
I've got 10 AP running just fine but the Aironet 600 shows operational status as "UP" (normal is "REG") and "Admin status", "AP Mode" and "AP Sub Mode" are all grayed out.
I installed the newest firmware on the WLC (ver 7.2.110.0) and it has upgraded the Aironet 600 as well.
I've read to through the installation manuals and from everything I can see I should be able to configure the Aironet 600 as soon as it contact WLC,
So what am I missing?

The guide says:
"""snip"""
•The access point is not broadcasting the enterprise WLAN.
Resolution: Ask the teleworker to check the cables, power supply, and LED status. If you still cannot identify the problem, ask the teleworker to try the following:
–Connect to the home router directly and see if the PC is able to connect to an Internet website such as http://www.cisco.com/. If the PC cannot connect to the Internet, check the router or modem. If the PC can connect to the Internet, check the home router configuration to see if a firewall or MAC-based filter is enabled that is blocking the access point from reaching the Internet.
–Log into the home router and check to see if the access point has obtained an IP address. If it has, the access point's LED normally blinks orange.
"""snip"""
If you have the ap joined already then make sure:
The ap radios are enabled.
If the aps part of an ap group make se the group breasts the SSIDs.
HTH
Amjad
Sent from Cisco Technical Support iPad App

Upgrade of Core Services Application Configuration Data in Yosemite

anybody knows if the upgrade of Core Services Application Configuration Data in Yosemite can be forced?
Due the my Matlab2012a failure to start, Mathworks advises to have a new version of the Core Services Application Configuration Data. They stated that a new version, a few hours after Yosemite installation would have been autoinstalled (Core Services Application Configuration Data 10.10", Version 10.39 or later!). I have setted the OS X system autodownload and installation, but after all these day my version is 1.025 and I do not see any 10.10 or 10.9 reference. The many Download trials by AppStore are completely unsuccessful at this moment.

Hi friends.
Also if the Core Services Applications Data Configurations is not updated yet after many and many days since the Yosemite Installation on my iMac, I have solved my Matlab2012a problem thanks to the wonderful Mathworks Support (in particular Daniel Vandenbulcke of the Mathworks Installation Support). I describe the steps needed for starting Matlab2012a (this is the last version as to my knowledge to use XQuarz)
1. Uninstall any version you have of Xquarz and X11 if you have them already installed
2. Download and install the latest version of XQuarz
3. Go to the Applications and select the Matlab2012a.app
4. right-click, then open the package content and go to Contents/MacOS
5. duplicate the StartMATLAB making an alias (StartMATLAB.alias) then drag this copy to the Desktop or another location
6. double-click on this alias and the Terminal window will open and start the program
I hope this will solve also your problem.
Though: No help from Apple people for the Core ...problem.

After upgrading to Belle, not able to view number ...

I recently upgraded my Nokia E6-00 to Belle OS. After upgrading, i am not able to view number of characters remaining while composing text msg.
While composing a text msg, we see number of word characters remaing to complete the first part of msg. If that it is completed then second part starts and so on.
For eg., when we open the compose msg window, we see 160(1). Once we start typing-we see the no. or characters remaining - like 130(1), 98(1), and so on.
But after upgrading to Belle, i am not able to view number of characters remaining while composing text msg.
Can anyone help on this?

The problem is not with duplicate contacts. It is with Nokia Suite. It installa a piece of software on the phone after which this link breaks.
How do I know this? I recently tried the leaked belle version by flashing my phone. After which everything was working fine. That is numbers showing up in call log and with messages.
I recently put the official release using Nokia Suite and the problem is back. Hope Nokia figures this out and fixes it.

Upgraded to Belle from anna now wifi wont work on ...

tried everything but due to some reason wifi wont work on my e7, it was working al well on symbian anna but after the upgrade to *belle* it says connected but gives no browsing ,on the same wifi network my other android phone works well
is there a fix for this ??
nokia can be suchha torture with their upgrades.phew.
things i tried
manually enetered and saved access point of wifi network.

Hi miller5280
Can you please explain the steps you took to "activate" your phone again?
I am having this problem:
1) after upgrade to the new software, phone was stuck in recovery mode (usb-itunes picture). Not jailbroken either.
2) have done the "reset" i.e. off button & home button together
2) I reinstalled itunes many times
3) switch usb port many times
4) de-auth / re-auth many times as well as purchased / download free apps (however, unable to sync due to itunes not recognizing the phone)
5) BUT it still won't restore (error codes such as 13, 14 0r 1604)
Can you or any here help me?? Can't use the phone at all. Very frustrating.....
Tks

Can not send e-mails after iOS5 upgrade

I upgraded my wifes iPhone to iOS 5. After the upgrade she can receive e-mails but can not send them. All the composed e-mails end up in her outbox. I click on the error and it says "The connection to the outgoing server "smtp.***.com" failed. Additional Outgoing Mail Servers can be configured in Setting>Mail, Contacts, Calenders."
Anyone have any suggestions?

Go to Settings => Mail,Contacts,Calenders => select the account and may have to click account again => should be viewing username and password, Scroll down and Select - Outgoing Server => Tap on Primary Server => try entering Username and Password in there even though it says optional... Also try port 25 if that doesn't work and try toggling SSL on/off if that doesn't work.

Can't configure old Airport express

Hi There,
I can't configure an Airport Express because Airport Utility was upgraded. I've found several posts on how to get around this but in each case, the software or automator script download links are either broken or the software/script no longer works.
I already own 4x Apple Wireless devices and am not interested in owning another one!
Is there a way to configure this device on a newer mac (10.7.5)?
Cheers
Ben

You must install the older utility.
Try this one and tell us which thing doesn't work.. later versions of lion use the same method as Mountain Lion.. Apple actually blocked it from working.. amazing people!!
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
Leave the package open on the desktop so you can see the file. AirportUtility56.pkg
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. If your Mac refuses to run the software, because it wasn’t downloaded from the Apple store, go to security in preferences and allow other software to work.. this is limitation of trade methinks. You can set back later if you like.
Now drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. in finder, open the new directory, drill down.. applications, utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall version 6 (now 6.3 if you updated) so don't try.. and you cannot or should not run them both at the same time.. although I have had no problems when doing so.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0

E7-00 - Upgraded to Belle - can't configure e-mail...

Similar Messages

Maybe you are looking for