E7 - After upgrading to belle wireless functions n...

I upgraded my E7 with Belle and to my surprise I am not able to connect to my office wireless. Now its not giving any option to configure LEAP. Please help. Dinesh

In the non-working computer, temporarily turn off your software firewall, including Windows Firewall, and see if that helps.
In the router, since the last firmware upgrade, have you reset the router to factory defaults, then setup the router again from scratch? If not, then please do this and see if it corrects your problem. If you saved a router configuration file, DO NOT use it.
Message Edited by toomanydonuts on 05-04-2008 05:54 AM

Similar Messages

After upgrade to Belle- Nokia E6

After upgrade to Belle- E6, my E-6 Keeps hanging

Hi rabinder,
Welcome to the Nokia discussion boards!
It might be worth you trying to do the following resets:
Soft Reset:
Enter into your keypad *#7780# and when prompted, enter the default passcode 12345. If you have changed the code, it will be the code you changed it to.
A backup will not be needed as this will not delete any data.
Hard Reset:
This will erase all data on your device, so a backup is recommended before you do this.
Once backed up, enter *#7370# and when prompted, enter 12345 as the default passcode.
Hope this helps.
Regards,
haZey
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

After upgrading to Belle, not able to view number ...

I recently upgraded my Nokia E6-00 to Belle OS. After upgrading, i am not able to view number of characters remaining while composing text msg.
While composing a text msg, we see number of word characters remaing to complete the first part of msg. If that it is completed then second part starts and so on.
For eg., when we open the compose msg window, we see 160(1). Once we start typing-we see the no. or characters remaining - like 130(1), 98(1), and so on.
But after upgrading to Belle, i am not able to view number of characters remaining while composing text msg.
Can anyone help on this?

The problem is not with duplicate contacts. It is with Nokia Suite. It installa a piece of software on the phone after which this link breaks.
How do I know this? I recently tried the leaked belle version by flashing my phone. After which everything was working fine. That is numbers showing up in call log and with messages.
I recently put the official release using Nokia Suite and the problem is back. Hope Nokia figures this out and fixes it.

After upgrade Safari has limited functionality on Facebook

Hi,
After upgrading I have one particular problem in Safari that is annoying the **** out of me. When on Facebook I only have limited functionality. I can click on videos and apps with my mouse but I cannot type in any text fields. Facebook works fine in Firefox......what happened?
Any advice would be appreciated. CogginM

HI and Welcome to Apple Discussions...
Hopefullly this will help... I can feel your frustration.
Uninstall and reinstall a fresh version of Flash Player Plugin.
Uninstall Flash
Reinstall Flash
From the Safari Menu Bar, click Safari / Empty Cache. When you are done with that...
from the Safari Menu Bar, click Safari / Reset Safari. Select the top 5 buttons and click Reset.
Mac OS: Web Browser Quits Unexpectedly or Stops Responding
Safari add-ons can cause performance issues or other situations
Also, if you are running Safari in 64 bit mode, try running in 32-bit mode instead. Right or control click the Safari icon in the Applications folder, then click: Get Info In the Get Info window click the black disclosure triangle next to General so it faces down. Select 32 bit mode. Quit Safari then relaunch.
And repair disk permissions...
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Carolyn

Logon failure after upgrade Windows 2003 domain functional level and schema

Before upgrade:
Windows 2003 Std server: Domain functional level 2000, Schema verion 30
Crystal Report XI R2: Authentication: Windows AD
Logon OK.
After Upgrade:
Windows 2003 Std + Windows 2008: Domain functional level 2003, Schema verion 44
Crystal Report XI R2: Authentication: Windows AD
Logon Error: An error has occurred: java.lan.NullPointerException
Is it a Tomcat problem? OR Java runtime problem? OR XI R2 problem?
Anyone can help to fix it!? Thanks!!

OK, I try again in the testing lab and simplify the combination. We only consider Windows 2003 ONLY.
Before AD upgrade:
AD/Domain Controller: Windows 2003 Std server: Domain functional level 2000, Schema verion 30
Crystal Report XI R2: run on Windows 2003 memeber server
Operating OS: Windows XP/Vista/7: Authentication: Windows AD
Logon OK.
Upgrade cmbination 1
Step 1:
Upgrade Domain controller: Windows 2003 to Windows 2003 R2 (Domain functional level 2000, Schema verion 31 )
Crystal Report XI R2: run on Windows 2003 memeber server
Operating OS: Windows XP/Vista/7: Authentication: Windows AD
Logon OK.
Step 2:
Upgrade Domain Functional Level: Windows 2003 R2 (Domain functional level 2003, Schema verion 31)
Crystal Report XI R2: run on Windows 2003 memeber server
Operating OS: Windows XP/Vista/7: Authentication: Windows AD
Logon Fail
Logon Error: An error has occurred: java.lan.NullPointerException
Upgrade combination 2
Direct upgrade Domain Functional Level: Windows 2003 (Domain functional level 2003, Schema verion 30)
Crystal Report XI R2: run on Windows 2003 memeber server
Operating OS: Windows XP/Vista/7: Authentication: Windows AD
Logon Fail
Logon Error: An error has occurred: java.lan.NullPointerException
In this testing, we can conclude that the Domain Functional Level upgrade from 2000 to 2003. The MI logon will fail.
Q1. Crystal Report XI R2 cannot run on Windows 2003 server (Domain Functional Level: 2003)?
Q2. If Crystal Report XI R2 can run on Domain Functional Leve: 2003, how to fix our problem?
Do you have any idea to help us? Thanks!
Edited by: Initiator on Jul 20, 2010 6:22 AM

Missing applications after upgrade to belle

i just upgrade anna to belle... but most of my games apps were lost... is it really lost or just the shortcuts were lost... i tried searching them but still cant find them...

Hi Centchua,
Welcome to the Nokia discussion boards!
The compatibility of some applications may not have been updated by the developers for Belle. There is more information here on the FAQ of Belle availability.
I recommend you to login to your Nokia store account and re-download the purchased applications.
Let us know how you get on and feel free to reply back here if you are having more issues.
Regards,
haZey
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

G only access after upgrading to WRVS440N wireless router

I am using a WUSB54GP wireless adapter.
I was using a WRT54S wireless router.
Both worked great together.
Now that I upgraded to a WRVS440N router, I have to set it to G-only in the
Wireless
Basic Wireless Settings page
in order to connect.
Using the B/G/N mixed settings does not allow me to connect.
FIrmware updated on the WVRS4400N to 1.1.03. No firmware update available for the WUSB54GP.
Reinstalled drivers for Windows XP Pro SP2 using the WUSB54GP.
So far no luck.
Suggestions?

In the non-working computer, temporarily turn off your software firewall, including Windows Firewall, and see if that helps.
In the router, since the last firmware upgrade, have you reset the router to factory defaults, then setup the router again from scratch? If not, then please do this and see if it corrects your problem. If you saved a router configuration file, DO NOT use it.
Message Edited by toomanydonuts on 05-04-2008 05:54 AM

Micro in dv9805eg after upgrade on 7 no function

Hi had to change software. Now internal Mic doesn not work anymore is there a way to fix it? Where to find matching drivers?

Hi had to change software. Now internal Mic doesn not work anymore is there a way to fix it? Where to find matching drivers?

WiSM can't function normally after upgrading from vesion 6.0.182 to 7.0.220.

I have a WiSM installed in WS-6504E, vesion 6.0.182. It can't function normally after upgrading to version7.0.220.
When it was unstable, I found three strange condition
1. A lot of log looks like this
*osapiReaper: Mar 10 14:53:39.282: %OSAPI-3-FILE_OPEN_FAILED: osapi_file.c:370 Failed to open the file : /proc/1059/stat.(erno 24)
*osapiReaper: Mar 10 14:53:39.282: %OSAPI-3-TASK_GETTIME_FAILED: osapi_task.c:3431 Failed to retrieve statistics (/proc/<pid>/stats) for task 'fmcHsTask'
2. Internal Temperature was showed "sensor failed"
3. CPU User load is Zero
Anybody can tell me what wrong with the wireless controller ?

Could be a hardware failure.

I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?

Hi
I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?
I have tried reseting the network settings and forgetting my wireless connection and re-connecting to it. I even backed up my phone on itunes and restored it, factory reseted it. Nothing seems to work.
Also after my upgrade to ios 8.1 my personal hotspot option under cellular data has disappeared.
Would you please help me out? I would really appreciate it.

Hi..
Restart your router then restart the iPhone to test.
If that doesn't help, try this support article > iOS: Troubleshooting Wi-Fi networks and connections

After upgrading to yosemite my magic mouse won't work when I wake up my mac mini. I have to power down then restore power to get it to function.

after upgrading to yosemite my magic mouse won't work when I wake up my mac mini. I have to power down and restore power for it to function. Also cannot send email from mac mini or iPad.

after upgrading to yosemite my magic mouse won't work when I wake up my mac mini. I have to power down and restore power for it to function. Also cannot send email from mac mini or iPad.

Keyboard wireless key not working after upgrading to windows 8.1

Hello,
I am having hp pavilion dv6-6165tx notebook, where keyboard having a wireless button that turns ON and OFF all wireless devices, After upgrading to windows 8.1, HP Connection Manager is not getting installed, as well as Key is not working, key color turns red and white but no action is performed.
Kindly suggest me some solution.
Note: HP Doesn't provide drivers for windows 8/8.1 ONLY WINDOWS 7 for hp pavilion dv6-6165tx.
Thanks.

Hi @Jayesh_Bhadja ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6-6165tx Notebook and the Wireless keyboard not working correctly. Here is a link to troubleshoot the keyboard.
The HP Connection Manager is something that is for Windows 7 not Windows 8.1. I would uninstall this from your Notebook. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating. It has a troubleshooting tool in this.
Make sure all your updates have been completed. I would try restarting my Notebook a few times.
If that does not help I would uninstall the keyboard from the Device manager.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

After upgrading my iPad it will not print to wireless printer?

I was printing to a wireless hp printer no problem. After upgrading iPad to os5 can't print? The hp printer is a supported model??

Turn off your WiFi connection on your iPad, then back on after a few seconds and try again. It's worked in the past for me. Best way I can describe it is your iPad 'forgets' that the printer was also in the same network and when you toggle on and off your wifi connection it finds it again.

MacBook can't see my home wireless network after upgrade to OSX 10.8.5

After upgrading to OSX 10.8.5, my MacBook does not detect any wireless nertworks. My iPad and iPhone work fine, my router has been rebooted, WiFi is turned on, and the ethernet connection is how I am writing this message to you via broadband. There are a half dozen wireless networks in range (according to my iPhone) but the MacBook cannot find the router I am sitting next to. Any ideas on how to correct this issue?

It appears an SMC reset was required:
HT5815 I've just done the 10.8.5 update on my MacBook Pro end of 2008, and WiFi don't work after reboot... Impossible to activate it...
Here is your other post: MacBook can't see my home wireless network after upgrade to OSX 10.8.5
If you reply to it and marked it "solved", perhaps with a link to that post (copy and paste it, or just say you performed the SMC reset) it will help others find a solution. Thanks!

Loss of Blue tooth function after upgrade to 10.6

I have a MacBook Pro... I also have a Motorola Droid that was working perfectly with blue tooth when I was using OS 10.5 etc... I was able to "Browse" my phone, Transfer files, it worked like a dream. After upgrading my OS to Snow Leopard... I am unable to transfer files or do any thing of any value using the blue tooth connection on my computer. When I attempt to "Browse" the phone I get the message "The Device does not have the necessary services" I have searched the forums for help with this issue... I'm seeing a lot of "your phone doesn't have that capability" or "your provider has disabled that to make you pay more" or worse yet... I've seen things like "blue tooth isn't made for file transfer it's only for headsets and headphones.
Admittedly most of the people posting these questions had never been able to browse or transfer files before and were just now trying to make this work. I on the other hand had been able to use all these services. Which is why I am not considering my phone as the source of the problem at this time.
Nothing has changed on my phone "no updates in software" and the only change that was made is going from Leopard to Snow Leopard. This is leading me to the conclusion that there is something I'm not seeing in 10.6.x that has caused an issue with my blue tooth functionality... I have gone in to system preferences, in to file sharing and enabled sharing in bluetooth... I have also tried to delete the Bluetooth plist file as was suggested in other discussion forums.
This has not changed any thing I still get the same error when trying to transfer files or browse. If any one else has any advice on something I could try to return my bluetooth function to Pre10.6 that would be most helpful... I'm aware of work arounds "Emailing my self,,, etc." I'd prefer to have my bluetooth back.
Sorry if this post sounds harsh or snippy... I'm getting very frustrated.

Is it smarter economically to repair replace the board, or use the computer as it is and purchase a replacement?
This depends on your usage. If you find performance with 1GB to be satisfactory (maybe not optimal, but satisfactory), just keep using it as is. A new logic board (which will likely be used or refurbished depending on the source) is $400-$800 plus installation. I don't know what company's charge to repair the logic board.
If you decide to go with a new system, you can sell your current system to offset the cost. Or just keep it as backup/extra/computer, or give it to a family member who can use it. If I were going to give it to a family member, I'd reinstall Tiger, as it probably will work a little better in 1GB than Leopard.

E7 - After upgrading to belle wireless functions n...

Similar Messages

Maybe you are looking for