E7 always restart while making call with Bluetooth...

Has anybody experienced a problem that you can not make calls when qwerty keyboard is in use and Bluetooth to headset is activated because phone makes every time restart while setting up the voice call. It just first indicates that "disconnecting Bluetooth" and soon after that restarts. And when you make it again and again it does the same.
Hopefully this is going to be corrected in next E7 SW release.

No, contrary to this I can pick up the phone, close the keyboard and no interruption takes place. However, I purchased my phone only two weeks ago and it might have the new SW already.
Attraction wrote:
Has anybody experienced a problem that you can not make calls when qwerty keyboard is in use and Bluetooth to headset is activated because phone makes every time restart while setting up the voice call. It just first indicates that "disconnecting Bluetooth" and soon after that restarts. And when you make it again and again it does the same.
Hopefully this is going to be corrected in next E7 SW release.

Similar Messages

While making call I am not audible to other end

While making call if I am using loudspeaker mode, I am not audible to other end

Hi Vinzgenius,
From you are describing, it sounds like an issue with the microphone. Take a look at the article below to troubleshoot the issue further. Check to make sure that you do not have any Bluetooth devices connected as well as restarting your iPhone.
If your voice is too faint or sounds unclear using iPhone, or iPod touch
http://support.apple.com/en-us/HT203792
Hope this helps,
-Norm G.

Error while making connection with remote oracle database

Dear,
I am trying to make connection with oracle database but when i run java file it's raise an error "classnotfoundexception oracle.jdbc.driver.oracledriver"
DriverManager.getConnection(
"jdbc:oracle:thin:@erp:1521:ORCL", "apps",
"apps");
Pls any body have idea.
Thanks.

Thanks for support.
Below is error which i am getting while making connection with remote database.
C:\Program Files\Java\jdk1.7.0_05\bin>java OracleJDBC
-------- Oracle JDBC Connection Testing ------
Where is your Oracle JDBC Driver?
java.lang.ClassNotFoundException: oracle.jdbc.driver.OracleDriver
        at java.net.URLClassLoader$1.run(URLClassLoader.java:366)
        at java.net.URLClassLoader$1.run(URLClassLoader.java:355)
        at java.security.AccessController.doPrivileged(Native Method)
        at java.net.URLClassLoader.findClass(URLClassLoader.java:354)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:423)
        at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:356)
        at java.lang.Class.forName0(Native Method)
        at java.lang.Class.forName(Class.java:186)
        at OracleJDBC.main(OracleJDBC.java:13)
Advice.

I want to zoom while making video with iPad

I want to zoom while making video with ipad

I apologies. I was under the assumption that others reading my question would think if I was talking about iMovie I have it on my iPad and I never clarified thank you for pointing that out. I do have iMovie and had iMovie the whole time in my attempts including the one where I looked through iTunes in my PC while my iPad was hooked up via USB , was in my iPads apps looking at the list and iMovie was not one of the listed. But even if it was how is this going to help me?

My iPhone4 struck while making call i cant see any icons??

I had updated my phone to 4.3.5 after that,some times My phone is going un responsive while making calls and taking calls. Please let me know the solution

Did you try to reset the phone by holding the sleep and home button until the Apple logo comes back again? You will not lose any data doing a reset.

My phone turns off while making calls

my handset turns off while making calls, this happens quite often in a day, i restored the phone to factory setting, still didnt help...

I've got the same issue. Really annoying. I was hoping ios5 was going to fix it, but it didn't .
I would be really interested to hear if someone has found the cause of the problem

Audio quality with iPhone 5 new earphones is not good while making calls.

I have new Factory Unlocked iPhone 5 with new earphones. These earphones are pretty smooth while listening to music. When it comes to making calls there is lot of noise background or a sort of amplifier sound and both the ends the audio is not clear. Did any one face this issue with new earphones with iPhone 5? if so, what is the solution for this? Can any one help me resolving this issue as I am the extensive user of iPhone 5 with new earphones? Thanks in advance.

I have new Factory Unlocked iPhone 5 with new earphones. These earphones are pretty smooth while listening to music. When it comes to making calls there is lot of noise background or a sort of amplifier sound and both the ends the audio is not clear. Did any one face this issue with new earphones with iPhone 5? if so, what is the solution for this? Can any one help me resolving this issue as I am the extensive user of iPhone 5 with new earphones? Thanks in advance.

Can't End Call with Bluetooth Headset

Having just purchased a Blackberry 8330, I am disappointed with the inability to end a call with a Bluetooth hands free device (Jabra VBT185Z). The hang-up problem occurs when the Blackberry is locked and a call is placed with the Bluetooth device. While this may sound trivial, I find not being able to end a call while driving without first punching in password and unlocking my Blackberry extremely inconvenient, a hazard to driving, a waste of air time, and an engineering oversight.
I'd appreciate any advice on fixing the problem or determining a bluetooth alternative. (May be it's time for an iPhone.)

Hi nlowpow,
Please could you back up your phone and do a reset through Settings > About > Reset phone. Note this will wipe all data and settings from the phone.
Also, check your SIM card or swap it with a new SIM (usually without charge from your operator). If you still experience this, please take your phone to a Nokia Care point to ensure there is no hardware problems.
Hope this helps.
Regards,
haZey
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Lumina 920 - making calls with the headphone jack

maybe this is the typical nokia phone operation, but it seems like the heaphone jack should work with a microphone headset for making calls. I've tried three different wired sets with no luck.
havig switched from an iPhone, this is a little dissapointing. Unless it's a faulty device?

Hi there,
unfortunately you may have a faulty device. From what i have heard, all mic headsets should be able to work, even if button support is not optimised (i.e. the microphone bit should work, and the other caller hear you). If it doesn't work, then you can try performing a reset of the phone by going into Settings > About > Reset your phone, or a soft reset (by pressing the volume down and power buttons together for five seconds). You won't lose any data, but always pays to perform periodic backups anyway.
Failing that, try performing a hard reset as detailed here: http://mynokiablog.com/2011/11/08/how-to-hard-reset-nokia-wps-three-finger-restart/ and if that STILL isn't working, then you will need to take your phone to your local Nokia Care point for them to inspect.
to locate your nearest Nokia Care point: http://nokia.com/support

Trouble while making calls

Has anyone experienced while making a call that the iphone 3gs' screen goes black? This has already happened to me twice and i've only had the phone for 2 days. When it happens I can't even power the phone back on. I have to connect it to the charger to get the screen back. It has occurred a few other times when in the contact list also but the screen comes back up immediately.
Is anyone else having issues with the contact list moving slowly when opened on the main screen? This is not a problem when I access it through my phone icon.

The screen always goes black during a call. Like Tamara said, the proximity sensor switches it off to save battery.
In comparison to the 2G, however, I got the impression that it a bit longer until the screen wakes up, or even sometimes hangs until it returns.
I had the same black screen which wouldn't turn on for a couple of seconds after using voice mail.

Phone are restarting while on call

Hi All,
Please suggest me what will be case for restarting all telephone while on call. I am facing this case in UC560 with 4 FXO port and 8 extension .
Regards
Rinchuraj

Is the UC560 restarting as well?
"show version" should show you the uptime.
Also, as already mentioned it's good practice to upgrade the IOS & phone firmware if possible.

Trouble with sending texts and making calls with new Verizon iPhone 4S

A friend of mine just upgraded from a 3G on AT&T to a 4S on Verizon. She sync'd her contacts via iCloud. She is having an issue where if she takes the 1 out of a contact's name from her address book, txts don't send. If she leaves the 1 in, it doesn't recognize the name, and just lists the 1 (201) xxx-xxxx at the top instead. Worse, when making calls, if that contact does not have a 1 before the area code, it tells her her plan isn't set up for international calling and that it can't complete the call. I am on AT&T so I can't help her. My phone has the international assist option, I assume Verizon's does too.
I can edit my phone number on my AT&T phone; it appears she cannot edit hers to either add or delete the 1 before hers.
Surely this is easily fixable -- just thought I'd see if anyone knows what's going on here. Thanks all.

I'm also a Verizon subscriber - have been with Verizon since the summer of 2001 and when my contract renewed last June, I selected the same phone as my free upgrade.
I was looking forward to using the same features with my Mac when I discovered that Verizon purposely disabled these features and I'm not completely sure why but it must involve protecting a potential revenue stream for Verizon.
My existing 2-yr contract with Verizon expires a year from this June and I plan on making the switch to Cingular at that time primarily due to Verizon disabling these bluetooth features but also due to the iPhone. Cingular has excellent coverage in my area - I have a number of friends who are Cingular subscribers that get better reception at my residence than I do and I use my cell phone in place of a land line. The iPhone will have been on the market for a year or so at that time and I expect a new and improved iPhone model to be available by then. And if I decide not to purchase an iPhone, I'm making the switch to Cingular regardless.

Making Calls with Broadband Talk

Hi Guys,
I was just wondering if someone could clear this up for me??
When making calls using Broadband Talk, do you have to dial the entire number (incl. STD Code) or should you just be able to make the call without this?
For example, I live in Derry, N.Ireland and the full number starts 02871. When dialling from a normal landline you would just dial "71" and the the rest of the number. However. if I do this using my BB Talk line, I get a Dead tone. I tried to make a call and entered the number with the full STD Code, puely on the off-chance it would work, and it did actually work!! Is this necessary or should I be able to make a call without the full STD Code??
Cheers
Solved!
Go to Solution.

I think you always have to enter the dialling code I'm afraid

Hi-pitched screeching sound while making calls

While using my iphone 5, OTHER PEOPLE report hearing a high-piched screeching sound at various times during the conversation. I don't hear anything unusual (no noise)!!. Has anyone else had this problem? Known fixes? I've had this phone for 1.5 years -- problem only recently, but getting more frequent.

iphone 5 7.1.2, Verizon
I am having this issue since 4 months. I have received multiple devices as replacement as my phone was still under warranty. Nothing seems to solve this.
I was being suggested below , I tried them all
1. Mark calls with ###, once I marked them they came up with an answer there is nothing wrong with the network , change the phone
2. Next phone had same issues, answer was its due to incoming calls from T mobile.
When I showed them even AT&T people heard it, they suggested to change the phone
3. Next phone had same issues, they suggested me not to use bluetooth and talk from an area with full bars (now dots). I receive at least 3 dots if not 4 or 5 at my home.
4. Next phone, they suggested to not restore the back up but setup Iphone as new. I did and only installed 1 app. Still people on other side had screeching sound, this time it was Sprint and T mobile both.
Funny part when I called apple support and verizon for the first time, even they could hear that sound.
No one seems to know why this is happening. I may buy a basic clamshell phone, insert my SIM card in that and use it for a few days to deduce if its device related or carrier. Again I am no expert.

Debit Items not getting picked while making payment with F110

HI,
When making payment with F110, items with Debit balance is not getting picked.
Example:
Payment method is assigned in the Maser data.
For a particular vendor one item has a credit balance- posting key 31.
We have posted another JV with F-02 and debited that vendor with Posting key 21. (Payment Method is not entered in the line item)
When we run F110 the credit balance is picked and debit balance is being shown in exception list.
When we got to FB02 and insert payment method in debit line item and then again run the F110 then system pickes all line items and pays the net amount.
The question is why system is not considering Payment Method from Master Data in debit line item, while in credit line item it is picking payment method from the master data.
Do I need to do any setting for it so that it should automatically take payment method from master data even in case of Debit line items.
Regards
Sanjay

Hi All,
Thanks for your quick replies.
But it does not solve my problem.
When I am not assigning any payment method to either Debit or credit line items, system picks (payment method from Master data) for only credit line items and ignores debit line items.
But the problem is that when I assign payment method to debit line item (which is similar to what has been assigned to vendor Master Data) system groups both debit and credit line items and makes payment of only net amount.
My question was why system considered the debit line item for making payment if I manually enter payment method in the line item, if system has been designed only for out going payment. In my opinion It should have reacted similarly irrespective of whether payment method entered in the line item or not.
Regards
Sanjay

E7 always restart while making call with Bluetooth...

Similar Messages

Maybe you are looking for