E7 Mail app slow to open mails with attachments

Hi,
I have a brand new E7 configured with my corporate Exchange 2003 server account and my private gmail. E7 runs the most current SW P1.1 014.002.263.03.
Mail/calendar/contacts sync works but opening a received mail with any attachment listed (even how tiny, like 1kb jpeg) on the mail application takes ages. If I click on a message on the mail list it can take upto 30 seconds before the screen shows the message. During the time the phone freezes, even the hardware buttons are not responding. The symptom is the same on Exchange and Gmail accounts. Messages not having any attachments open in about 4 secs. I have tried to delete the accounts etc. but no joy.
The mails are received as push, I have tried also scheduled receiving, offline mode etc. but the speed is the same. Is anyone else seeing this and is there anything to be done? The speed of the mail application is so poor that it prevents me to use the E7 as the business phone.
Thanks a lot in advance.
Solved!
Go to Solution.

Mine tends to open attachments fairly quickly, but it is dependent on signal strength, and obviously much faster on wifi than on edge!
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution' 

Similar Messages

  • In Exchange 2013 i cannot open mails with attachments greater than 19.6 MB in EWS or OWA

    Hello,
    i have in Exchange 2013 CU3 on Windows 2012 the following problem :
    When backup mails using EWS i get the message " EWS Error Code : ErrorMessageSizeExceeded." in mails with attachments greater than 20.137 KB ( 19.6 MB).
    Then I checked all the settings of the EWS , but the defaults are already significantly higher than these 19.6 MB (Base64 approximately 26.5 MB)
    web.config ( maxAllowedContentLength = " 85000000 ").
    Settings of the MaxSendSize and ReceiveSize are 300MB .
    All requestfiltering settings in IIS are set to 85MB.
    When i access via EMS or OWA , file attachments over 19.6 MB can not be opened .
    However, the preview shows in OWA the correct mail including attachment and it can be saved from the preview up to the set maximum size.
    By double clicking on an email in OWA bigger than 19.6 MB i get the following error message:
    "Error : Your request can not be completed right now Please try again later . . "
    Send and receive mail can also be up to maxsize .
    When accessing via Outlook , this problem does not occur.
    i hope anyone here can help me
    Thanks in advance

    Hi,
    To change the maximum message size for Outlook Web App clients, you need to change the value of
    maxAllowedContentLength, maxRequestLength and both instances of
    maxReceivedMessageSize by editing %ExchangeInstallPath%ClientAccess\Owa\web.config in notepad.
    To change the maximum message size for Exchange Web Services clients, you need to change the value of
    maxAllowedContentLength and all instances of maxReceivedMessageSize="67108864" in %ExchangeInstallPath%ClientAccess\exchweb\ews\web.config.
    When you are finished, save and close the Web.config file. Also need to restart IIS by running the following command:
    IISReset /noforce
    For more information about Configure Client-Specific Message Size Limits on Client Access Servers, please refer to:
    http://technet.microsoft.com/en-us/library/hh529949(v=exchg.150).aspx
    Thanks,
    Winnie Liang
    TechNet Community Support

  • Slow up loading for sending E mail with attachments

    Slow up loading for sending E mail with attachments. It takes a long time to send most attchments. I'm on cable and had no problems prior to changing to Mac.com

    You need to start in the app that contains the file that you want to send as an attachment, and use that app's functionality (assuming that it has it) to select the file and connect it to an email - you can't start in the Mail app itself

  • I'm using OS 10.6.8 and Mail 4.5. When I receive mails with attachments which are visible the save button doesn't work. Some contacts have problems opening files sent by me using Mail too. This was never a problem on pre-Intel. A real Mac **** up !

    I'm using OS 10.6.8 and Mail 4.5. When I receive mails with attachments which are visible the save button doesn't work. And some contacts occasionally have problems opening files sent by me using Mail too. This was never a problem on pre-Intel Mac. A real Mac **** up ! Any ideas ?

    Can you drag and drop the attachments visible in the email to the Desktop OK or does that fail ?
    Re the sending: Are these recipients on Mac's or PC's as the file type could be an issue, if on Mac's then try setting the Mail Preferences Composing setting to Plain Text not Rich Text and see if that improves things.

  • Receiving mail, but can't send mail with attachments?

    Hello,
    I can't send mails anymore, I have been able to send some without any attachments (i.e. reply doesn't work as it automatically attaches the original text). This started 3 days ago. Also, my mail doesn't seem to recognize powerpoint and word docs., but I a know the people who have send me such files do not have VISTA. When I choose "open with" then it works. So I have 2 problems, one being moe urgent then the other.
    1) can't send mail with attachments
    2) .doc (word), .pps (powerpoint)attachments are not always recognized.
    thank you all!!!

    Try going into Settings > Mail, Contacts, Calendars > select the account > account name , tap on SMTP (under the 'Outgoing Mail Server' heading) and then tap on your Primary Server and try entering your email account and password and see if it then works

  • Mountain Lion mails with attachments on exchange get lost

    Dear Community,
    we encounter a real annoying and weird issue with CS6 on our Macintoshs using Mountain Lion 10.8.2.
    It all started, that mails with attachments (e.g. JPGS, PDFS...) just get lost and do not arrive. Not all mails but some, spontaneously. But always the same files were affected. Some work, some not.
    Our company is using Exchange, and there is no message back to the sender, that the mail did not arrive. You can even see it on sent items and it occurs in Outlook 2011 as well as Apple Mail. I contacted our IT and they checked the Exchange logs and everything is fine, like the mail would have arrived, bit it does not.
    We went crazy and tried almost everything, clean OS installs, new users... the funny thing: when you forward the mail out of "sent items" it arrives...
    Today a milestone appeared while troubleshooting this issue: We realized, that only files saved from Photoshop, Indesign, Illustrator (basically CS6) are affected. When I save a PSD as a JPEG out of Photoshop and mail it as an attachement it gets lost. Always. Same for PDFs or other file formats out of CS6.. When I open a PSD  on embedded Mac Viewer and export as JPEG or PDF it does arrive the sender. So it only happens when saving the files out of CS6.
    So now, I have no clue how to proceed. Is anybody else having this issue or can help us? It is a mess, because it turns our daily work to a horror.
    Any help is appreciated solving this weird issue. Thank you so much.

    Hi ,
    You can try setting the below value to false and see the results too since its exceeding the recipient thread limit could be a problem with the throttling as well.
    <add key="MailboxDeliveryThrottlingEnabled" value="False" />
    Restart the transport services after the change and see the results.
     Good Luck :)
    Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com
    Hello, thanks for the try,
    tried the change in edgetransport.exe.config. Restartet the 4 transport services (Transportdelivery,transportsubmission, transport and transport logsearch) No change though. Problem still exists. May this go into msexchangethrotteling.exe.config? 
    Regards
    Michael

  • Converting mail with attachments to PDF

    I was used to archive mail in Outlook to PDF (using Adobe Acrobat).
    Now I want to convert mail with attachments from Apple mail to PDF, but the attachments are only converted as icons and not readable anymore. Is there a plugin or anything else to solve my problem?

    What are you expecting? An attachment cannot be converted to a PDF file unless you open it in an application that is capable of saving it in PDF format. And any attachments you convert to PDF would be separate from the actual email itself, which would be a different PDF file.

  • Encoding problem when forwarding mails with attachments using exchange account

    Hi,
    I'm facing a special misbehaviour of mail. Scenario: With Apple Mail 7.2 I would like to forward an exchange mail with attachments. The mail is wirtten in german and uses german special characters like äüöÄÖÜ. During editing the mail everything is ok which means all characters are shown in thte correct way. When I send the mail, something magic must happen in the background.
    When I look in the sent mail folder and open the mail, all special characters are show as "?". Must be an encoding problem, I gues but I don't know how to fix it.
    When I send exactly the same mail with another Apple mail account (non exchange), there is no problem. So I assume it has something to do with handling exchange accounts under Apple mail.
    Any idea to solve this issue? Thanks in advance.
    Br,
    Jakob

    This is a know issue with Yahoo! Email on the iPhone. When sending email, sometimes it will say it has been sent, while it really has not (and it will not show up in the sent folder).
    It has been discussed quite a bit in the forums, so a search will turn up a lot of discussion, but no solid solution. Some say Yahoo is working on a fix, other that Apple is.
    The most common solution (which is usually temporary), is to either reboot your phone, and/or delete and reinstall your Yahoo! Mail account on your phone.

  • Question: Is there a way to create a PDF from outlook e-mail that does not embed the attachment? better, is there a way to convert the e-mail with attachement (not embeded) as pdf pages? - Problem: I have 1400 e-mails with attachments that need to be conv

    Is there a way to create a PDF from outlook e-mail that does not embed the attachment? better, is there a way to convert the e-mail with attachement (not embeded) as pdf pages?
    - Problem: I have 1400 e-mails with attachments that need to be converted into pdf and the attachments cannot be embeded.
    System: PC Windows 7 using Acrobat X Prof. - Thank you!

    Hi ,
    There is an option of embedding index for faster search while converting email to a PDF .
    However I am not sure that will serve your purpose or not .
    I would recommend you to get in touch with Microsoft support as well .
    Meanwhile I'll work on it and get back to you in case I get a desired solution .
    Regards
    Sukrit Dhingra

  • How to send mail with attachments - ALBPM 5.7

    Hi All,
    I am new to BPM,
    Someone could help giving me a example of Send Mail with attachments in Aqualogic Studio 5.7?
    thanks,
    Renata

    nombrefichero="C:\\Temp\\test.doc"
    subject as String="Subject"
    message as String="Message"
    mailAttachment = Fuego.Net.MailAttachment(source : BinaryFile.readToBinaryFrom(name : nombrefichero), fileName : "test2.doc")
    mailAttachments[0] = mailAttachment
    correo as Mail
    correo.attachments = mailAttachments
    correo.contentType = "text/html"
    send correo
    using from = "[email protected]",
    recipient = "[email protected]",
    subject = subject,
    message = message

  • Sending mails with attachments using oracle 8i

    Hi,
    Could anybody please send a sample code for sending mails
    with attachments using oracle 8i.
    Thanks in advance

    For oracle8i there is an example package from OTN:
    http://www.oracle.com/technology/sample_code/tech/pl_sql/htdocs/Utl_Smtp_Sample.html
    You have to re-write the package a bit to work it with BLOBs instead of RAW attachments, but that should be no problem
    Hop this helps,
    Michiel

  • I receive and e-mail with attachments but when I forward them, the attachments are smaller. how to fix this?

    I receive e-mails with attachments, but when I forward them the attachments are reduced in size.  What do I need to do to have them forwarded the same size as I received them?

    If the attachments are photos, when you forward them, look on the bottom right of your compose window, change to "actual size".  It's probably set to small as displayed here:
    Regards,
    Captfred

  • I get an error when I try to forward e-mails with attachments.  Advice?

    I have tried many different ways to forward e-mails with attachments to no avail.  I sometimes get a question if I want to include attachment or not.  When I answer yes, I sometimes get an error message and at other times the forward goess through, but without the attachment.  Help!

    No I have not checked the IOS version requirement but I have a similar c2940 where the upgrade was no problem.
    Here is the sh ver output:
    Cisco Internetwork Operating System Software
    IOS (tm) C2940 Software (C2940-I6Q4L2-M), Version 12.1(13)AY, RELEASE SOFTWARE (fc3)
    Copyright (c) 1986-2003 by cisco Systems, Inc.
    Compiled Thu 26-Jun-03 18:33 by antonino
    Image text-base: 0x80010000, data-base: 0x805BA000
    ROM: Bootstrap program is C2940 boot loader
    31-kjeller-adm uptime is 8 weeks, 6 days, 1 hour, 40 minutes
    System returned to ROM by power-on
    System image file is "flash:/c2940-i6q4l2-mz.121-13.AY/c2940-i6q4l2-mz.121-13.AY.bin"
    cisco WS-C2940-8TF-S (RC32300) processor (revision B0) with 20778K bytes of memory.
    Processor board ID FHK0806Y07R
    Last reset from system-reset
    Running Standard Image
    9 FastEthernet/IEEE 802.3 interface(s)
    1 Gigabit Ethernet/IEEE 802.3 interface(s)
    The password-recovery mechanism is enabled.
    32K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address: 00:0F:24:50:CE:40
    Motherboard assembly number: 73-8783-05
    Power supply part number: 341-0085-01
    Motherboard serial number: FOC08051PPK
    Power supply serial number: HIC0802020C
    Model revision number: B0
    Motherboard revision number: A0
    Model number: WS-C2940-8TF-S
    System serial number: FHK0806Y07R
    Configuration register is 0xF
    Ole Martin

  • [EWS][Java] How can I use the Search Filter only mails with attachments?

    Hey,
    I'm trying to search a folder ( doesn't matter  which ) for ONLY mails with attachments.
    How can I use the search filter for that purpose? 
    Thanks!

    You can drag the attachment collumn from settings and sort on that collumn
    In the main Outlook window, on the View menu, point to
    Current View, and then click Customize Current View.
    Click Fields. In the Available fields list, click the field that you want to add, and then click
    Add.
    Come back and mark replies as answer if they help, and help others with the same problem. If this post is helpful please vote it as Helpful on the left side.

  • Cannot move mail with attachments

    I was helping a friend prepare to eventually delete her hotmail account from Mail on her iPad. She did not want to lose any mails, so we were moving messages from her hotmail inbox to her gmail inbox. Moving the messages was uneventful until we came to messages with attachments. Any mails with attachments will not move. When trying to do so, we get an error message that simply says the mails cannot be moved...but gave no reason why (really helpful). They're simply stuck in the hotmail Inbox and cannot be moved out. Anybody have a clue what's happening here?
    In a worse case scenario I told her we could forward those messages to her new account and then just delete them from her hotmail account. By doing so we'll save the messages, but the messages won't appear in the new inbox according to when they were originally sent, but rather by when they were forwarded. Being able to move them would be the proper solution, but it simply won't work.

    Perhaps the mail server has a size limit that it allows. Might try a free web service and see if that will work for those attachments.

  • Cannot send mail with attachments-plain mail its ok. Any ideas?

    Out of the blue I cannot send e-mails with attachments (any kind). Mail without attachments go out without problems.
    Very weird.
    I have an iMac, mac mail 5.2. and Lion.
    Please help.
    Thanks

    Perhaps the mail server has a size limit that it allows. Might try a free web service and see if that will work for those attachments.

Maybe you are looking for

  • Problem calling a session bean (EJB 3.0)

    Hello, I'm new to netbeans and J2EE. I'm using NetBeans 5.5 Beta 2 and sun application server 9 pe. I created a new enterprise application and i'm trying to access a Session Bean (Remote and Stateless) from the app-client (outside the main class). Th

  • Combobox in jtable

    suppose you are editing a combobox in a jtable. in the combobox, there are items like A0 A20 C0 C20 E0 E20 my main goal is traverse and edit the table by keyboard. when i go to a jcombobox, e.g. i hit the button C, it only focus the combo, not select

  • Text code interpreted as scientific notation

    I have an http service returning xml to populate a data grid. The grid columns are tied to element attributes. One of these columns is a simple text code, like a product code. When this product code "looks like" scientific notation (e.g. "3E5"), the

  • Interactive script fails displaying umlauts

    Hi, For my Arch x86_64 with chakra I made a backup system intended to work like this: udev detects my backup device, assigns a link in /dev and starts a backup script. that all works fine. the backup script is run as root, as it was invoked by udev.

  • Dsic ejects 15 seconds after being in drive..

    Can anyone help me please..it just started doing this...I can put any cd or dvd in my drive of my imac core duo 17 inch...i put the cd or dvd in there..it makes a noise like its looking for info then ejects it...it does this to ever disc, can someone