E7 Outgoing Call Problem

Recently I bought a Nokia E7 which I guess is the Nokia's one of the best launched Business Phones after a fairly longer period.
After using it just for 2 weeks, my perception has changed. And there are couple of reasons for this;
1. This phone is giving me lot of troubles while making calls. Most of the time I get a very annoying "Request Rejected" message pops up on the screen and this happens almost 30-40 times in a day.
2. I was a Blackberry user and chose this phone over Blackberry Torch but now I am repenting over my decision that even after spending this huge amount I feel helpless while making calls.
I have a Vodafone connection and even called their customer care but they said that all of the services from Vodafone on my number are working fine and I am also feeling the same as the network strengh always shows to be full and I can receive the calls, send text etc.
Also, I was going through other N-8 forum and came to know that even N-8 users are facing similar issues, which some of them says that the problem arose after downloading and installing the Software Updates and some says that this is the problem of the compatibility issue of CUG (Close User Group) services with the OS.
Even I reset my phone to original factory setting but to no success. Also, I turned off the CUG services but again the same message "Request Rejected"
Now I am feeling really frustrated with my decision that I shouldn't have gone for the SYMBIAN, which actually is a headache.
I would strongly request Nokia people to look into this issue as it is not good for the image of Nokia as a Brand globally when so many other players have already there to take advantage of this.
I hope someone from Nokia will surely take some remedial action on this existing issues with E7.
Thanks in advance.
A Frustrated E7 User.

Just because Vodafone say all your services are working correctly , this doesn't mean the statement is true ? I've had problems with them a couple of years ago with picture messaging, which they told me was all ok and reset my phone and installed new settings, still didn't work, but after several irate calls and speaking to a supervisor, they admitted they'd 'removed' the service from my account. If you can try another sim card in the phone and see if it behaves any differently, that should tell you whether it's a handset issue or if the problem lies with VF ?
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution' 

Similar Messages

  • Incoming/Outgoing Call Problem

    Earlier today, my friend's iPhone was working fine. Then he plugged it into the cassette deck with stereo 1/8" output into the cassette deck to listen to some tunes. Now, he can't hear or be heard when he makes a phone call. The calls still come through and he can make and receive calls, just not hear anything or be heard. When the volume is adjusted, the screen comes up and says Ringer and "headphones" in parenthesis. Can anyone help him to get back to a normal non headphone world?

    If the cassette device you were using does not say that it can be used with the iPhone, it is not a good idea to use that device. This may be the problem that you stumbled upon. I also believe that using these "unapproved for Iphone" devices can void your warranty, so it is best to steer clear of using them. Specifically about your problem, I am sorry to say that I can not help

  • 3845 Outgoing Call Problem

    Dear Experts,
    Need you help with my router's capability to make call to ISDN PRI.
    Before, Telco only provided 3 digits (1000 combination) and my config is working both incoming to outgoing.
    But now that we changed it to 4 digit so I can map (one is to one) all my 4 digit extension to provided last 4 digit of the ISDN number.
    The incoming calls are working without the need of Translation Rule, but no outgoing.
    Attached is my config (along with info of "sh isdn service/stat, sh controller e1) and stat provided by Telco having the old setup and new setup which results to successful and unsuccessful results respectively.
    They're saying that I don't have a proper number plan.
    They're saying that they just change the 3 digits to 4 digits and so am I, but outgoing doesn't work.
    I notice that state of D Channel is out of service, is it normal?
    Kindly please analyze my attached info and would really appreciate anyone who can help me get the right config.
    Thank you in advance.
    Regards,
    Brian

    first as long as the ephon is registred to the same router CME
    u dont need:
    dial-peer voice 2000 voip
    destination-pattern 2000
    session target ipv4:10.9.254.111
    second what this for ?
    dial-peer voice 1473 voip
    destination-pattern 1473
    session target ipv4:10.10.254.1
    if the call come to ur router as 2000 then the phone that rigistered to that router CME with number 2000 will ring directly
    for outbound calls
    make the following one:
    dial-peer voice 701122000 pots
    destination-pattern 2000
    incoming called-number 2000
    direct-inward-dial
    port 1/0/0:15
    as:
    this is defualt incoming dial-peer
    dial-peer voice 701122000 pots
    incoming called-number .
    direct-inward-dial
    port 1/0/0:15
    the dial-peer voice 9 pots
    has trnaslation that will trnaslte the calling number for EVERY call going out to 0701122000
    if u want this number to work only with DN 2000 u can do it with out the translating like
    ephone-dn 1 dual-line
    number 2000 secondary 0701122000
    if the call will come to ur CME as 2000 or 0701122000
    the phone associated with DN 1 will answer
    and make the dial-peer like:
    dial-peer voice 9 pots
    destination-pattern 9[0-9].........
    port 1/0/0:15
    forward-digits 10
    try it and let me know
    if helpful Rate

  • IPhone 4s 6.1.3 problems with 3g,In and Outgoing Calls

    Hi Everybody!
    I got a factory unlocked (originally was Vodafon locked) iPhone 4s with firmware 6.1.3.When I insert my sim (Hungarian Telenor) when only EDGE is on it founds the signal and seems like everything is working.After a few hours or sometimes even a day passes by a phone stays on full signal with Carrier logo and Edge on, but my friends reporting that they cant call me(like im offline) and i cant make calls either.The interresting stuff is that the Edge connection is fully working during that im offline for my friends via Calls and i can send and recieve imessages and viber messages.
    When i switch 3g on it disconnects from service drops the EDGE and never finds the way back and stays 'searching' or 'no service' at all..
    I thought that its my Carrier's fault so i went to spoke with them and tried 5different micro Sims( cause i wrote that 4s-s are sensitive to SIM card types).. this thing not worked either,
    Then i tried the phone with a T-mobile SIM card.. it does the same..connects to the services,but with 3g switched on not finding service..so totally like with my sim.
    Here Comes the bumm... i Tried the phone with vodafone sim and everything works.. simple connectivity to 3g with full internet usage,can make and recieve calls...I spoked with all of the Carriers and also Apple and no body can give me nothing..the phone is off varranty so changed to a new one isnt an option..
    Anybody? Something? im beginning to give up .. please help if you can..Thanks!!
    ps.:i restored over 20times,reset network settings,switch off and on automatic setting time.. every little possible things that people wrote on forums before..

    neverstop wrote:
    1. Settings > General > About - Carrier sais Carrier 14.0 when i restore and startup with my Telenor  sim.. ..
    1. In order
    2. ...... everyone is pointing on the other and i cant do anything about it..just the whole 3g/call failed stuff is bothering me...
    2. It appears configuration issue. I use three iPhones (in my family) on four unsupported carriers. Never had any problem except on one. Outgoing calles to one particular party failed. Set right by Carrier.
    3. Is there something like the Unlock process was not fully succesfull...
    3. Never heard. It is digital : Yes or No. In the instant case, unlock is successful.
    Download firmware afresh via iTunes or from here iPhone4,1_6.1.3_10B329_Restore.ipsw
    and save. Insert Telenor SIM in the iPhone. Backup. Option+Restore (Mac) Shift+Restore (PC) pointing to saved firmware. Reject Carrier updates, if any offered by iTunes. Setup as New.
    Observe.

  • E7 Problem with outgoing calls

    Hi, I own the E7 for the last 5 months or so, but since 1 month after purchase, my phone's outgoing calls switched off completely and even after the normal tries of restarting the phone etc. it didn't turn on again. It does not go through at all and says no answer. However, I could send sms, receive calls and also access the internet. I checked with vodafone and they confirmed that there was no problem from their side and all bills payments were received by them on time.
    So I decided to replace the SIM with my friend's SIM and use the phone. Surprisingly, the outgoing calls were on. After that I again put my old SIM back into the phone and the outgoing calls started working fine. The problem now is that this turning off of the outgoing calls is happening too frequently.
    I asked Nokia care to look into this and they did nothing but reloaded the software, but this was of no avail. Couple of days back, I got the phone upgraded to Symbian anna. However this problem is still not solved and is frequent as before.
    Can anyone help me understand what the real problem might be? And what is the right solution?

    hi
    sometimes, E7 does not like old sim cards or sim cards with specific configuration, or cards with some minor scratches from frequently changing phones.
    try changing the sim card.
    there could also be a mechanical problem in the sim slot which can and will be overlooked by our dear nokia care liners.

  • Thank you for providing immediate  feedback.   bt that solution did not help me to solve the problem.still am nt able to make outgoing calls. i dont find any problem in recieving calls also right. bt i dont have any problem in recieving calls.

    Thank you for providing immediate  feedback.   bt that solution did not help me to solve the problem.still am nt able to make outgoing calls. i dont find any problem in recieving calls also right. then i dont what is wrong with my iphone.The same sim which i used in iphone4s is working in all other phones.its not the problm of carrier.
    Iphone 4s Black 16gb

    Rather than starting a new thread every time it would be easier to follow you if you stick to the one thread

  • Not able to make outgoing calls in iphone4. Regularly i face this problem, at the same time i receive incoming call, can do net surfing, can access email and sms, only outgoing calls get failed every time. please answer to solve this problem

    not able to make outgoing calls in iphone4. Regularly i face this problem, at the same time i receive incoming call, can do net surfing, can access email and sms, only outgoing calls get failed every time. please answer to solve this problem

    Good day Sidharth Namrta,
    It sounds like you are unable to make any calls, but you can recieve them, and everything else seems to work fine. I recommend you use the troubleshooting in the following article to help you get that resolved, named:
    iPhone: Troubleshooting issues making or receiving calls
    Follow the steps below to resolve this issue. Please test after each step.
    Toggle airplane mode: Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
    Check your phone settings:
    Check your Do Not Disturb settings: Tap Settings > Do Not Disturb.
    Check for any blocked phone numbers: Tap Settings > Phone > Blocked.
    See if Call Forwarding is turned on: Tap Settings > Phone > Call Forwarding.
    Ensure that your software is up to date:
    Check for a carrier settings update.
    Check for an iOS software update. 
    Note: Some updates may require a Wi-Fi connection.
    If the iPhone has a SIM card, reseat the SIM card.
    If the iPhone 4 or iPhone 4s is on the Verizon network, dial *228 from the iPhone and select option 2 to update the Preferred Roaming List (PRL). The PRL determines the cellular towers the phone uses for cellular service, selecting those with the best signal strength.
    Reset the network settings: Tap  Settings > General > Reset > Reset Network Settings.
    Try to make or receive calls in another location.
    Attempt to isolate to one network band:
    If you're having the issue on LTE, disable LTE, if possible, and try again.
    If you're having the issue on 3G/4G, disable 3G/4G, if possible, and try again.
    Contact the carrier to check the following:
    Your account is properly configured to use the specific iPhone that has the issue.
    There are no localized service outages.
    Your account doesn't have a billing-related block.
    Your calls don't have errors on the carrier system.
    Restore the phone as new.
    If the above steps don't resolve the issue, go to an Apple Retail Store, carrier, Apple Authorized Reseller, or contact AppleCare to send the phone in for service.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • I have problems with outgoing call no audio, only works with speaker. I bought my iphone on december 2011.

    I have problems with outgoing call no audio, only works with speaker. I bought my iphone on december 2011.

    Had the same problem, no audio on incoming or outgoing calls and only could hear the conversation of the call if I put on speaker. It seemed to start after I did a recent IOS update this past month. I tried restart, reset and restore of my iPhone but nothing changed. It appears not to be a software issue but a hardware problem. I got my phone this past summer so it was still under warranty and got it replaced.

  • SPA8000 Problem with outgoing calls from trunk

    Hi all,
    I have SPA8000 with the latest firmware 6.1.12.
    Tried the first time to configure the trunk groups. With incoming calls it caused no problems. But with the outgoing calls cannot solve the problem:
    When dialing, the SPA8000 try found number to itself.
    Port 8 in trunk group 1.
    10.120.0.67 - ip of SPA8000.
    172.17.1.1 - ip of PBX
    302 - number of trunk.
    444 - other number on PBX.
    INVITE sip:[email protected]:6060 SIP/2.0
    Via: SIP/2.0/UDP 10.120.0.67:5361;branch=z9hG4bK-e9bbff35
    From: <sip:[email protected]>;tag=1e668866b76f0b0do1
    To: <sip:[email protected]>
    Remote-Party-ID: <sip:[email protected]:6060>;screen=yes;party=calling
    Call-ID: [email protected]
    CSeq: 101 INVITE
    Max-Forwards: 70
    Contact: <sip:[email protected]:5361>
    Expires: 240
    User-Agent: Linksys/SPA8000-6.1.12
    Allow-Events: talk, hold, conference
    Content-Length: 202
    Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER
    Supported: x-sipura, replaces
    Content-Type: application/sdp
    v=0
    o=- 13756 13756 IN IP4 10.120.0.67
    s=-
    c=IN IP4 10.120.0.67
    t=0 0
    m=audio 19469 RTP/AVP 8 101
    a=rtpmap:8 PCMA/8000
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-15
    a=ptime:30
    a=sendrecv
    SIP/2.0 404 Not Found
    To: <sip:[email protected]>;tag=63d33124-0
    From: <sip:[email protected]>;tag=1e668866b76f0b0do1
    Call-ID: [email protected]
    CSeq: 101 INVITE
    Via: SIP/2.0/UDP 10.120.0.67:5361;branch=z9hG4bK-e9bbff35
    Server: Linksys/SPA8000-6.1.12
    Allow-Events: talk, hold, conference
    Content-Length: 0
    What is wrong? What must I do to outgoing call?
    Screenshots of configuration:

    Hey!
    Thank u soo much ana_bidi! It worked and my phone is back to life
    I even sent an email to Nokia and I got the weirdest reply ever! They were telling me to check if my sim was inserted correctly I was like whaaaat? And I did mention to them that I can receive calls and send/recieve SMS! I seriously don't know what made them suggest that thing
    Anyways thanks again for the solution!
    Have a great day! 
    Walid Shaaya

  • When I make an outgoing call the recipient cannot hear me very well as though the volume was turned down very low. However when I activate the speakerphone the recipient can hear me loud and clear. I transferred my SIM Card into a new device Same problem

    When I make an outgoing call the recipient cannot hear me very well as though the volume was turned down very low. However when I activate the speakerphone the recipient can hear me loud and clear. I transferred my SIM Card into a new device only to be subjected to the exact same problem. I have reset the phone clearing all the data and updated to the most recent software version available from itunes; and still no improvements. The results of my switching to a new phone would indicate a software issue.
    Does anyone out there have this problem and how can it be fixed?
    Thanks,
    Teresa

    Try removing the screen protector that is covering the microphone.
    Scratch that; wrong answer. I thought you meant you had trouble hearing.

  • Nokia C7 Outgoing calls - "No Answer" problem

    Hi,
    I am facing a problem with my C7 phone. Whenever I try to make outgoing calls from my phone, it gets automatically disconnected and displays the message 'No Answer'. Have tried so many things but have not been able to find a solution for the same. Even hard reset has provided temporary relief to other users having the same problem. Please help. Hoping for a solution.

    I've also faced the problem occasionally with the phone snapping the call quickly with the no answer display... My sim card is almost seven years old...
    blitZkid
    Nokia C7: Running on Nokia Belle
    "If I'm helpful in anyway, a click of appreciation on the star would be nice"

  • Problems with outgoing calls after update

    I have an iPhone 5. Since I've updated it to iOS8, I can't make outgoing calls in any way, shape, or form. If I dial the number and press the call button, nothing happens. If I click on the contact from my call log, nothing happens either. Someone help me please!!

    Hi there hwelch3,
    I would recommend taking a look at the troubleshooting steps found in the article below. 
    iPhone: Troubleshooting issues making or receiving calls 
    -Griff W.

  • My iphone 3Gs is disconnecting on outgoing calls on a very regular basis stating call failed. Is this a common problem and how do I resolve the issue?

    My Iphone 3Gs disconnects during outgoing calls very regularly when reception is fine. Message on phone is Call Failed. Is there a simple solution for this this or does it require specialist Apple fix

    Have you reported this to your carrier?  Perhaps your SIM is faulty.

  • E1R2 outgoing international calls problem

    I have a dilemma with one of my client. It's a newly deployed CME system with an E1R2 connection to the telco.
    Now the E1R2 config on the router is fairly basic and this config has been known to work with other carriers. But for this particular carrier, international outgoing calls are failing while local calls are fine.
    This carrier claims that the Cisco router on our end is not sending an "End digit" when dialing international. It does so on local calls, however. I have to admit that I'm not really good at telco technologies and would appreciate any help from you guys.
    Attached is the R2 Trace they sent me, comparing a successful local call and a non-successful international call. Any inputs appreciated.
    Thanks!

    Appreciate the response.
    The IOS is 12.4(15)T or T1. Not 100% sure.
    Here's an excerpt of the config:
    ======================================
    controller E1 0/0/0
    framing NO-CRC4
    ds0-group 1 timeslots 1-15 type r2-digital r2-compelled ani
    ds0-group 2 timeslots 17-31 type r2-digital r2-compelled ani
    voice-port 0/0/0:1
    connection plar 500
    voice-port 0/0/0:2
    connection plar 500
    dial-peer voice 500 voip
    session target ipv4:10.0.0.1
    codec g711ulaw
    no vad
    dial-peer voice 101 pots
    dial-peer voice 102 pots
    destination-pattern 9T
    clid network-number 027935300
    port 0/0/0:2
    ======================================
    The creation of two DS0 groups was suggested to me by a colleague because when I configure a single DS0 group (ie. ds0-group 1 timeslots 1-15,17-31... etc), I can't make ANY outbound calls. Incoming works, however.

  • IPhone 4 voice call problems on 3G

    I noticed at the weekend that my iPhone 4 was having trouble with voice calls. Incoming calls would sometimes hang up when I answered them, outgoing calls would take a very long time to connect (or freeze), and when I did get through to someone the call quality was extremely low (lots of stuttering and cutting out).
    After trying just about everything recommended on various help pages (including reseating the sim card, refreshing the network settings, and restoring the phone), I still could not get it to work properly. I then tried turning off the 3G and, lo and behold, the phone worked absolutely fine! Voice calls were clearer than ever!
    I contacted Tesco Mobile hoping they might be able to shed some light. They said there are no faults with the network and have arranged for me to return my phone. That could take up to 10 days though, which I can't really afford.
    Does anyone know what the problem is here? Does the fact that it works fine with 3G disabled suggest that it is not a hardware problem?

    I've been having a very similar issue that just started last night. I keep dropping calls and when I try to call out nothing happens at all. I cannot browse Safari through 3G either. It keeps coming and going. I was able to finally place a call out and then tried making another call later and it wouldn't work again. I tried the restore as well and nothing works!
    I do not know if I should contact AT&T or Apple for the issue. I do have the extended warranty that I purchased with the phone but about a week after I got the iPhone 4 I had to have it replaced for issues I am not even sure that they would replace it again. I do not have a home phone I rely solely on my cell so I cannot wait to have it fixed or replaced but I am not going to keep a phone that doesn't work especially after paying so much for it!

Maybe you are looking for