E7 won't charge from a USB charger - can anyone he...

Just got my E7 earlier this week.  It will charge perfectly using the mains adaptor, and when I connect it to my PC via USB, it charges, but it will not work with the car USB charger that I have.  I know the charger works, because I have used it on other phones, but it will not work on my E7. 
Any ideas if there is anything I can do to fix this?  Will be a problem if I am using my E7 as primary music source or sat nav with no way to charge it when out and about in the car.

with regards to car charger it does depend on the voltage , I have a couple and only one works with the E7 , if the phone charges with mains and usb to computer it's obviously the actual car charger that's incompatible , if the phone won't charge at all then the fault is with the handset which requires repair or replacement under warranty !
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution' 

Similar Messages

  • I have an ipone 3 . it will charge from the wall charger but not in the car or via usb nor will itunes detect it ?

    i have an iphone 3 , it will only charge from the wall charger. will not charge in the car nor via usb and itunes or pc wont detect it ???

    maybe there is some sort of fuse in the cabeling or the iphone its self. Does it have a charge bar on the lock screen when it is being charged. How old is the iphone that may be the problem

  • Nokia 6700 - Charge from Micro USB?

    Hi,
    The 6700 manual confirms that the phone can be charged from both microUSB and the standard mini charge but what it doesn't say is that the only way to charge using the microUSB port is to connect the phone to a PC or Laptop. If you plug the USB cable into any other type of USB charge device, including USB charge adapters (such as the iPhone charger) or a standard car 12v socket > 5v USB adapter the phone issues an error confirming charge method is not accepted.
    I thought the whole point of phone companies agreeing to the new microUSB standard was to permit charging using any USB port? It seems Nokia have limited the charge capabilities of this phone and it is a right pain.
    Come on Nokia, please fix this with the next firmware update !!

    This is odd, because Nokia lists their AC-10 microUSB mains charger as compatible. I had thought the device rejects any current above the trickle charge from a standard PC USB cord, but if it works with the Nokia microUSB charger, it should accept higher currents (1200mAH). In which case the Nokia charger must be "talking" to the phone over USB to give it approval.
    On the other hand, the manual doesn't mention support for USB mains chargers at all, so maybe including the AC-10 on the peripherals list is a goof.
    Hopefully this doesn't extend to Nokia's other USB-charging phones, I have plenty of generic USB chargers around.
    Help I'm trapped in a sig factory.

  • HT1349 my IPOD touch won't be recognized by my DELL Latitude PC and it won't synch. I'm technologically handicapped but all I know is it used to synch whenever I would attach it to computer with USB. Aside from tossing my DELL can anyone help?

    My IPOD Touch isn't being recognized by my PC(DELL LatitudeD630) and it won't synch. I'm "technologically handicapped" but all I know is it used to synch whenever I would attach it to PC with USB cable. Aside from tossing my DELL can anyone offer suggestions that might solve this problem ? Thanks

    I had this issue, I fixed it by going to:
    Start > Control Panel > Devices and Printers
    Then find the iPod, and Right Click > Properties > Hardware > Properties > Driver > Update Driver > Update Automatically
    The driver had not been automatically installed, and windows found and installed the driver files for me. Took ~90 seconds, and then the iPod began it's sync process almost immediately after. Hope this helps anyone with the same issue! I'd try this before re-installing iTunes.

  • Battery does not charge from the iPhone charger

    i have same problem with my iphone 4 and the etisalat provide me with new iphone 4 within same day i find also the new iphone have same problem it take me more than a month for replacement and now i start again to make complain and i do not know how long with take to replace the i pphone i ask the apple to request from etisalat to speed the process to replace i like apple products i phone , ipad,ipod... i hope you can help me to keep your product number one in uae market

    Try rebooting the iPhone, hold both the power and home buttons until the apple logo appears and it restarts, ignoring the red slider if it appears.
    The iPhone 5 should charge from the iPad charger, doing the reverse doesn't work, however.
    Leave it on the charger for a couple hours and if it still does not indicate increased battery charge, take it to an Apple store genius bar and have it checked.

  • I have a 2012 Mini with a fusion drive that won't boot from a usb cloned drive. It came with 10.8.2 pre installed. I have zapped the PRAM and reset the SMC. Any thoughts?

    I have a 2012 Mini with a fusion drive that won't boot from a usb cloned drive. It came with 10.8.2 pre installed. I have zapped the PRAM and reset the SMC. Any thoughts?

    When I tried using a recently downloaded (from the App store) version of MtLion 10.8.2 (12C60) I could NOT get the new MacMini to install or boot from a USB I had previously made. I was however able to use the Recovery Mode of the MacMini to create a bootable SSD which I had installed. The problem arose when I went back into Recovery DU as it saw the seperate drives (SSD & HD) as a broken Fusion Drive. Interestingly DU from the boot volume had NO issues and reported NO faults. It was the Recovery DU that identified the faulty Fusion Drive configuration. At this point I am definately out of my depth but my speculation is that the Recovery Volume is being used in some fashion to form the method or pattern that DU assigns files to the drives, System Report sees the drives as seperate volumes with all their individual characteristics.
    Disk Utility did not make a bootable USB, I don't have or use CCC or Super Duper.
    Here is the longer version I've been compiling:
    Having bought a late 2012 Mac Mini(6,2) i7 2.66GHZ with the standard 1TB 5400 HD and 4GB of RAM (base model) I immediately decided to install a Mercury Elite 6g 240GB SSD and up the RAM to 16GB. I received both shipments on the same day and had all my new toys in front of me. After following the video advice on OWC’s website for the installation of the second drive I started the mini and formatted the SSD to accept the OS from Recovery on the original HD. This MacMini shipped with 10.8.2 (12C2034) as the OS, the normal build of 10.8.2 is (12C60). Having used Recovery Disk Utility to format the SSD it came back with an error that DU could’t Repair. I went ahead and installed the OS on the SSD and the Mini booted normally from both drives. The issue I encountered with this setup was that iMovie encountered an “unexpected error” and would not save a completed project. I therefore decided to figure the drive issue out because I suspect the new Fusion File Management software didn’t like my configuration with drives that Recovery DU saw as needing to be “fixed”. After spending some time on the phone with both OWC and Apple Support I took the plunge and used Internet Recovery Disk Utility and allowed both drives to be “fixed” after which DU created a Fusion Drive (Logical Drive) that I then ran Repair Disk on and it showed up as a single drive in DU. It works perfectly as described by Apple’s site:
    http://support.apple.com/kb/HT5446
    Having checked the Link Speed and Negotiated Speed they both show as 6g so I’m pleased not to have lost performance due to it being fuzed to a 3g 5400 drive. The biggest drawback is that Apple’s Fusion Management only allows for 1 additional partition and I would have preferred more than that.
    I have sourced some additional information here:
    http://blog.macsales.com/15619-special-note-for-adding-an-ssd-to-a-2012-mac-mini ?
    http://blog.macsales.com/15619-special-note-for-adding-an-ssd-to-a-2012-mac-mini ?
    http://blog.macsales.com/15619-special-note-for-adding-an-ssd-to-a-2012-mac-mini ?
    http://blog.fosketts.net/2011/08/05/undocumented-corestorage-commands/
    If anyone has a factory Fusion Drive could you please post the Link and Negotiated Speeds of both drives? This information can be found in Apple > About This Mac > More Info… > System Report >  Serial ATA and the drives should show up as discrete drives with their info listed separately.

  • Can anyone help me- I recently had an archive operating reinstall completed at the genius bar (so they didn't have to delete my hard drive), but now my battery says "not charging." It used to hold a 2.5 hour charge, and now nothing.  Can anyone help?

    Can anyone help me- I recently had an archive operating reinstall completed at the genius bar (so they didn't have to delete my hard drive), but now my battery says "not charging." It used to hold a 2.5 hour charge, and now nothing.  Can anyone help?

    Hi, Michelle. Welcome to Apple Support Communities.
    Have you tried resetting the SMC? The SMC (System Management Controller) has control over the charging function, so resetting it may help.

  • Since updating my iPad to IOS 7.1.2, individual Apps won't update from with Apps.  Has anyone else had this issue?

    Since updating my iPad to IOS 7.1.2, individual Apps won't update from with Apps.  Has anyone else had this issue

    Thanks SerZak!  I lost my reply to your post.  But I discovered I was logged out after the update.  I logged back in and it was sorted.  I wouldn't have worked this out on my own, so thank you for you help.  Much appreciated. 

  • I am trying to reset my security questions and i am not getting an email from apple... can anyone please tell me what i need to do to fix this?

    i am trying to reset my security questions and i am not getting an email from apple... can anyone please tell me what i need to do to fix this?

    Forgotten Security Questions/Answers
    You need to contact Apple by:
    1 - Use the Express lane and start here:
    https://expresslane.apple.com
    then click More Products and Services>Apple ID>Other Apple ID Topics>Forgotten Apple ID security questions.
    or
    Apple - Support -form iTunes Store - Contact Us
    2 - Call Apple in your country by getting the number from here:
    http://support.apple.com/kb/HE57
    or           
    Apple ID: Contacting Apple for help with Apple ID account security
    3 - Use your rescue email address if you set one up
    Rescue email address and how to reset Apple ID security questions
    For general  information see:
    Apple ID: All about Apple ID security questions

  • I have a brand new MacBookProo and I can not open PDF files from my desktop. Can anyone help me with this please?

    I have a brand new MacBookProo and I can not open PDF files from my desktop. Can anyone help me with this please?

    A new Mac comes with 90 days of free tech support from AppleCare.
    AppleCare: 1-800-275-2273

  • The cellular data services have disappeared from my settings. Can anyone help me restore it please?

    The cellular data services have disappeared from my settings. Can anyone help me restore it please?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
     Cheers, Tom

  • Sending messages . I can't send messages from iPad air. Can anyone help

    I cannot send messages from my iPad . Can anyone help

    1. Messages on the iPad can only be sent to other iDevices
    2. The receiving party must also be registered with iMessage
    Note: The two above conditions must be met.

  • I recently tried updating my iPad and while doing this, my internet connection faulted. since then my PC does not recognise my i Pad when connected through USB. Can anyone help please???

    I recently tried updating my iPad and while doing this, my internet connection faulted. since then my PC does not recognise my i Pad when connected through USB. Can anyone help please???

    You may have to force your iPad into recovery mode in order to restore the device since the update did not complete. This article explains how to do that.
    iPad: Unable to update or restore

  • Curve 9300 - Charging from 5v USB

    I want to be able to charge my BB from a 5v USB lead and at the moment I'm getting the cannot charge message. It will charge from a Kindle USB mains charger, 850ma output, and the Kindle will charge from the 5v USB lead. The 5v USB has a current output of 2A, which should be fine.
    Any ideas out there?
    Bold 9790/Curve 9300

    Hello,
    We only recommend using authentic BlackBerry Accessories with all your BlackBerry smartphones.
    Thank you
    -DrP
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • Charging from powered USB h

    Can the Zen V Plus be charged from a powered USB hub? I'm assuming it can but just wanted confirmation.

    Zeek5,
    As long as the hub is powered then yes it can be.
    Jeremy

Maybe you are looking for

  • Can I recover lost library from Windows backup file after hard drive crash?

    I'm sure this has been visited before, so I'm sorry if this is redundent. My daughters Windows notebook had to be reformatted because of a severe virus. I had all important files including iTunes songs backed up onto portable Hard Drive. Got her note

  • Possible to Scan via Wireless Network?

    Is it possible to add a flatbed scanner via an Airport wireless network? I have my Airport network set up and I am able to print wirelessly. The printer is an Epson all-in-one (Stylus Photo RX 500) so it includes a scanner. I can scan when hooked dir

  • Photo comes out black when I import from Iphoto to Imovie..

    Im trying to make a video from Imovie. but whenever I drag a photo from Iphoto to the project in Imovie, it comes out black when I play it.. Does anyone has solution for this one??

  • Would you like to save changes.. no changes to save

    hi guys, I currently have a master detail relationship but i have a problem. When a query is entered in my master block it automatically queries the detail block, this is fine, however , if i then want to enter a new query, thus entering query mode i

  • SRM PO Response - Change Delivery Date & Quantity

    Hi experts, when creating a PO Response in SRM, is it possible to change some datas as the delivery date or the quantity? Currently we are able just to change the field "Name of the POR ". But we would like to modify some other fields as the delivery