E70 can only connect with Linksys by Easy WLAN

I have an E70 since apr 2007 and used it without problems.
I bought a new router : Linksys Ultra RangePlus N Router.
Then I configured the router and my three other devices: laptop, Maemo N810 internet tablet and my HP WLAN printer connected without a problem.
But not my phone.
I set up WPA/WPA2 and filled in the key.
I see my router in the list of accessible Wifi hotspots and when I try to connect but then it says 'No WLAN network found'.
Restarting the phone and router did not help.
I removed MAC address filtering (despite my phone's MAC address is in the filter), did not help.
I put the Mixed mode (B/G/N) to Mixed (B/G) and then it said 'WPA key authentication failed'. Filling in the WPA key on the phone did not help.
Then I set on the phone TKIP encryption disabled, and then the router doen not appear anymore in the list.
And then I tried Easy WLAN , I selected my router SSID and filled in the key and Voila it worked.
But why is it not in the list of accessible Wifi hotspots ? Now I have to fill in the key every time when I connect to my own hotspot because I can only access it via Easy WLAN.
Any ideas on this ?
Nokia 5800
FW 30.0.011

Have the same problem.
What is EASY WLAN and how can I use it on my E70?
N8 FW: 022.014 -- Please separate Artist & Albums!
N86 8MP FW: 30.009 -- We need a new FW on this phone!
E51 FW: 410.34.001
E70 FW: 2.0618.07.10 -- Why no v3 for my code?

Similar Messages

Can only connect to Linksys E4200 when very close but PCs can connect at 50 feet. What's the solution?

Can only connect to Linksys E4200 when very close but PCs can connect at 50 feet. What's the solution?

If you're technically comfortable in getting to your Linksys settings - try changing the network mode or channel in your router's settings.
I still use my old Linksys router and when it's set to the default channel, which is 7, my Macbook Pro and Macbook Air sometimes have issues - changed the channel to 9 and have had no issues since.
Maybe it might work for you.
In any event - screenshots below are for your E4200 and play with those settings and see if any of the changes you've made improves how your Macbook connects. Before you change any settings, just remember what the old settings are in case you need to go back to your old settings.
Good luck.

24" iMac can't connect with Linksys

My new 24" iMac connects fine when hard wired to the Linksys BEFW11S4, but cannot truly connect by WAN. The diagnostics say that I am connected to the Internet, but the page (that doesn't come up) says that I'm not connected. The iMac is sitting right next to the router and our Dell laptop connects just fine. Any suggestions?
I'll try calling Apple in the morning. I'm a little discouraged by the whole PC to Mac process. I don't blame Apple completely, but they are clearly not as ready out of the box as the ads imply.

richperson,
I disagree. The most likely explanation for you and
others having a similar sounding problem is that so
many are first time Mac users. For one thing, many
first time Mac users simply do not take seriously the
"Welcome" setup procedure that appears when they
first startup their Macs. That setup will largely
determine whether subsequent operation will be
trouble free or not.
Eh,eh, you should as well tell the OP that he's doomed...
Since the Core 2 Duo is basically the same iMac as
the prior Core Duo that released just eight months
ago, it would be highly unlikely that there is
anything new that must be conquered. If one looks
across the other Mac discussion areas, it is common
that wireless networking problems are as persistent
an issue regardless whether the Mac computer model
has just been released, or is a five year old model.
Exactly...
One thing I do know is that AirPort works basically
the same in all Macs.
or doesnt !
Though I agree with you the OP probably did not configure properly airport authentification, parameters (or forgot to adjust MAC adress on the routeur or...), there ARE issues with wifi up to os 10.4.7. (I know of at least one bug more or less predictable and described it there : http://discussions.apple.com/thread.jspa?threadID=618964 . I still hope I'll get some feedback on a bug report I submitted about 10 days ago...)
We won't know for sure why the OP can't connect wirelessly until he takes the trouble to detail exactly the configuration of the linksys and the steps he took... For all I know it could be an incorrect configuration (the most probable of course), a bug similar as the one I encountered or an hardware failure...
But it looks like the OP came there to complain and whine, not really for help...
phjo

New XBOX 360 S can't connect with Linksys WRT54G2

I can't get the XBOX 360 (the new S model) to connect w/ XBOX Live through my Linksys WRT54G2.
After the automatic settings didn't work, I tried some manual instructions here:
http://homecommunity.cisco.com/t5/Wireless-Routers/WRT54G2-issues-when-it-s-plugged-in/m-p/207071?qu...
But that didn't work.
Note: I have a laptop and an iPad that connect to the router just fine.
Ideas?
Solved!
Go to Solution.

One additional piece of info... When I go to my Windows PC and look at the Network Map (Control Panel\Network and Internet\Network Map), the XBOX shows up as part of the network. But it has a dashed green line connected to it, instead of a solid green line like the rest of the devices.
Not sure if that provides any additional clues.

Can only connect one user at a time via VPN?

Hi, long-term Mac user but new to OS X Server. Dug thru the forums quite a bit but couldn't find an answer to this one - hopefully I wasn't searching with the wrong keywords.
Installed OS X Server 10.6 on a MacBook (white, 1 generation back) at the office. Sits behind an Airport Extreme, which is connected to Comcast. Other machines at the office are NOT routed through the Server, but rather connect directly to the Airport Extreme for internet access. I've set up server.mydomainname.com to point to our Comcast address, and I am able to connect via VPN to the server without any problems, and access the server using the server.mydomainname.com address which I pointed to my Comcast IP address, as long as I check "Send all traffic over VPN connection" on my client.
However, when I'm logged in via VPN on one computer, and then log in via VPN on another computer (with the same UID or a different one), the first one loses all connectivity through the VPN - it's as if it had been logged off.
In Server Admin, under the Settings|Network tabs, I have Computer Name set up as "theserver", and Local Hostname as "theserver" (so I can access via theserver.private). VPN is set up to enable L2TP over IPsec, sharing ranges 10.0.1.200 thru 10.0.1.220; no load balancing, no PPTP. Client DNS servers is set to 10.0.1.29.
Any ideas as to why I can only connect with one client at a time?

Thanks. I didn't see anything interesting, but then again I'm not up on VPN details. Here's the scenario:
First, I logged in as "user1", and I can use the VPN.
Then, I logged in as "user2", and I can use the VPN with user2, but user1 is no longer able to do anything over the VPN.
Then I hung up with user2, but user1 still can't see anything over the VPN.
Then I hung up and reconnected with user1, and user1 can use the VPN again.
Here's part of the log for this activity. I've replaced potentially identifying info with "XYZ" for safety. Appreciate any thoughts on this!
Tue Oct 19 07:33:08 2010 : L2TP received ICCN
Tue Oct 19 07:33:08 2010 : L2TP connection established.
Tue Oct 19 07:33:08 2010 : using link 1
Tue Oct 19 07:33:08 2010 : Using interface ppp1
Tue Oct 19 07:33:08 2010 : Connect: ppp1 <--> socket[34:18]
Tue Oct 19 07:33:08 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic XYZ> <pcomp> <accomp>]
Tue Oct 19 07:33:08 2010 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic XYZ> <pcomp> <accomp>]
Tue Oct 19 07:33:08 2010 : lcp_reqci: returning CONFACK.
Tue Oct 19 07:33:08 2010 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic XYZ> <pcomp> <accomp>]
Tue Oct 19 07:33:08 2010 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic XYZ> <pcomp> <accomp>]
Tue Oct 19 07:33:08 2010 : sent [LCP EchoReq id=0x0 magic=XYZ]
Tue Oct 19 07:33:08 2010 : sent [CHAP Challenge id=0x18 <XYZ>, name = "myserver.private"]
Tue Oct 19 07:33:08 2010 : rcvd [LCP EchoReq id=0x0 magic=XYZ]
Tue Oct 19 07:33:08 2010 : sent [LCP EchoRep id=0x0 magic=XYZ]
Tue Oct 19 07:33:08 2010 : rcvd [LCP EchoRep id=0x0 magic=XYZ]
Tue Oct 19 07:33:08 2010 : rcvd [CHAP Response id=0x18 <XYZ>, name = "user2"]
Tue Oct 19 07:33:08 2010 : sent [CHAP Success id=0x18 "S=XYZ M=Access granted"]
Tue Oct 19 07:33:08 2010 : CHAP peer authentication succeeded for user2
Tue Oct 19 07:33:08 2010 : DSAccessControl plugin: User 'user2' authorized for access
Tue Oct 19 07:33:08 2010 : sent [IPCP ConfReq id=0x1 <addr 10.0.1.29>]
Tue Oct 19 07:33:08 2010 : sent [ACSCP ConfReq id=0x1]
Tue Oct 19 07:33:08 2010 : rcvd [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
Tue Oct 19 07:33:08 2010 : ipcp: returning Configure-NAK
Tue Oct 19 07:33:08 2010 : sent [IPCP ConfNak id=0x1 <addr 10.0.1.213> <ms-dns1 10.0.1.29> <ms-dns3 10.0.1.29>]
Tue Oct 19 07:33:08 2010 : rcvd [IPV6CP ConfReq id=0x1 <addr XYZ>]
Tue Oct 19 07:33:08 2010 : Unsupported protocol 0x8057 received
Tue Oct 19 07:33:08 2010 : sent [LCP ProtRej id=0x2 80 47 01 01 00 0f 01 0a 02 1b 63 ff fe a0 dd da]
Tue Oct 19 07:33:08 2010 : rcvd [ACSCP ConfReq id=0x1 <ms-dns1 0.0.0.1> <ms-dns1 0.0.0.1>]
Tue Oct 19 07:33:08 2010 : sent [ACSCP ConfRej id=0x1 <ms-dns1 0.0.0.1>]
Tue Oct 19 07:33:08 2010 : rcvd [IPCP ConfAck id=0x1 <addr 10.0.1.29>]
Tue Oct 19 07:33:08 2010 : rcvd [ACSCP ConfAck id=0x1]
Tue Oct 19 07:33:08 2010 : rcvd [IPCP ConfReq id=0x2 <addr 10.0.1.213> <ms-dns1 10.0.1.29> <ms-dns3 10.0.1.29>]
Tue Oct 19 07:33:08 2010 : ipcp: returning Configure-ACK
Tue Oct 19 07:33:08 2010 : sent [IPCP ConfAck id=0x2 <addr 10.0.1.213> <ms-dns1 10.0.1.29> <ms-dns3 10.0.1.29>]
Tue Oct 19 07:33:08 2010 : ipcp: up
Tue Oct 19 07:33:08 2010 : l2tpwaitinput: Address added. previous interface setting (name: en0, address: 10.0.1.29), current interface setting (name: ppp1, family: PPP, address: 10.0.1.29, subnet: 255.0.0.0, destination: 10.0.1.213).
Tue Oct 19 07:33:08 2010 : found interface en0 for proxy arp
Tue Oct 19 07:33:08 2010 : local IP address 10.0.1.29
Tue Oct 19 07:33:08 2010 : remote IP address 10.0.1.213
Tue Oct 19 07:33:08 2010 : l2tpwaitinput: Address added. previous interface setting (name: en0, address: 10.0.1.29), current interface setting (name: ppp1, family: PPP, address: 10.0.1.29, subnet: 255.0.0.0, destination: 10.0.1.213).
Tue Oct 19 07:33:08 2010 : rcvd [ACSCP ConfReq id=0x2 <ms-dns1 0.0.0.1>]
Tue Oct 19 07:33:08 2010 : sent [ACSCP ConfAck id=0x2 <ms-dns1 0.0.0.1>]
Tue Oct 19 07:33:08 2010 : sent [ACSP data <payload len 26, packet seq 0, CI_DOMAINS, flags: START END REQUIRE-ACK>
<domain: name XYZ>]
Tue Oct 19 07:33:08 2010 : rcvd [IP data <src addr 10.0.1.213> <dst addr 255.255.255.255> <BOOTP Request> <type INFORM> <client id 0x08000000010000> <parameters = 0x6 0x2c 0x2b 0x1 0xf9 0xf>]
Tue Oct 19 07:33:08 2010 : sent [IP data <src addr 10.0.1.29> <dst addr 10.0.1.213> <BOOTP Reply> <type ACK> <server id 0x0a00011d> <domain name "XYZ">]
Tue Oct 19 07:33:08 2010 : rcvd [ACSP data <payload len 0, packet seq 0, CI_DOMAINS, flags: ACK>]
Tue Oct 19 07:33:34 2010 : rcvd [LCP TermReq id=0x2 "User request"]
Tue Oct 19 07:33:34 2010 : LCP terminated by peer (User request)
Tue Oct 19 07:33:34 2010 : ipcp: down
Tue Oct 19 07:33:34 2010 : l2tpwaitinput: Address deleted. previous interface setting (name: en0, address: 10.0.1.29), deleted interface setting (name: ppp1, family: PPP, address: 10.0.1.29, subnet: 255.0.0.0, destination: 10.0.1.213).
Tue Oct 19 07:33:34 2010 : sent [LCP TermAck id=0x2]
Tue Oct 19 07:33:34 2010 : l2tpwaitinput: Address deleted. previous interface setting (name: en0, address: 10.0.1.29), deleted interface setting (name: ppp1, family: PPP, address: 10.0.1.29, subnet: 255.0.0.0, destination: 10.0.1.213).
Tue Oct 19 07:33:34 2010 : L2TP received CDN
Tue Oct 19 07:33:34 2010 : Connection terminated.
Tue Oct 19 07:33:34 2010 : Connect time 0.5 minutes.
Tue Oct 19 07:33:34 2010 : Sent 777000 bytes, received 105388 bytes.
Tue Oct 19 07:33:34 2010 : L2TP disconnecting...
Tue Oct 19 07:33:34 2010 : L2TP disconnected
2010-10-19 07:33:34 PDT --> Client with address = 10.0.1.213 has hungup
Tue Oct 19 07:33:50 2010 : rcvd [LCP TermReq id=0x3 "User request"]
Tue Oct 19 07:33:50 2010 : LCP terminated by peer (User request)
Tue Oct 19 07:33:50 2010 : ipcp: down
Tue Oct 19 07:33:50 2010 : sent [LCP TermAck id=0x3]
Tue Oct 19 07:33:50 2010 : l2tpwaitinput: Address deleted. previous interface setting (name: en0, address: 10.0.1.29), deleted interface setting (name: ppp0, family: PPP, address: 10.0.1.29, subnet: 255.0.0.0, destination: 10.0.1.214).
Tue Oct 19 07:33:50 2010 : L2TP received CDN
Tue Oct 19 07:33:50 2010 : Connection terminated.
Tue Oct 19 07:33:50 2010 : Connect time 3.5 minutes.
Tue Oct 19 07:33:50 2010 : Sent 625383 bytes, received 225586 bytes.
Tue Oct 19 07:33:50 2010 : L2TP disconnecting...
Tue Oct 19 07:33:50 2010 : L2TP disconnected
2010-10-19 07:33:50 PDT --> Client with address = 10.0.1.214 has hungup
2010-10-19 07:33:59 PDT Incoming call... Address given to client = 10.0.1.216
Tue Oct 19 07:33:59 2010 : Directory Services Authentication plugin initialized
Tue Oct 19 07:33:59 2010 : Directory Services Authorization plugin initialized
Tue Oct 19 07:33:59 2010 : L2TP incoming call in progress from 'XYZ'...
Tue Oct 19 07:33:59 2010 : L2TP received SCCRQ
Tue Oct 19 07:33:59 2010 : L2TP sent SCCRP
Tue Oct 19 07:33:59 2010 : L2TP received SCCCN
Tue Oct 19 07:33:59 2010 : L2TP received ICRQ
Tue Oct 19 07:33:59 2010 : L2TP sent ICRP
Tue Oct 19 07:33:59 2010 : L2TP received ICCN
Tue Oct 19 07:33:59 2010 : L2TP connection established.
Tue Oct 19 07:33:59 2010 : using link 0
Tue Oct 19 07:33:59 2010 : Using interface ppp0
Tue Oct 19 07:33:59 2010 : Connect: ppp0 <--> socket[34:18]
Tue Oct 19 07:33:59 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic XYZ> <pcomp> <accomp>]
Tue Oct 19 07:33:59 2010 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic XYZ> <pcomp> <accomp>]
Tue Oct 19 07:33:59 2010 : lcp_reqci: returning CONFACK.
Tue Oct 19 07:33:59 2010 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic XYZ> <pcomp> <accomp>]
Tue Oct 19 07:33:59 2010 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic XYZ> <pcomp> <accomp>]
Tue Oct 19 07:33:59 2010 : sent [LCP EchoReq id=0x0 magic=XYZ]
Tue Oct 19 07:33:59 2010 : sent [CHAP Challenge id=0xf1 <XYZ>, name = "myserver.private"]
Tue Oct 19 07:33:59 2010 : rcvd [LCP EchoReq id=0x0 magic=XYZ]
Tue Oct 19 07:33:59 2010 : sent [LCP EchoRep id=0x0 magic=XYZ]
Tue Oct 19 07:33:59 2010 : rcvd [LCP EchoRep id=0x0 magic=XYZ]
Tue Oct 19 07:33:59 2010 : rcvd [CHAP Response id=0xf1 <XYZ>, name = "user1"]
Tue Oct 19 07:34:00 2010 : sent [CHAP Success id=0xf1 "S=XYZ M=Access granted"]
Tue Oct 19 07:34:00 2010 : CHAP peer authentication succeeded for user1
Tue Oct 19 07:34:00 2010 : DSAccessControl plugin: User 'user1' authorized for access
Tue Oct 19 07:34:00 2010 : sent [IPCP ConfReq id=0x1 <addr 10.0.1.29>]
Tue Oct 19 07:34:00 2010 : sent [ACSCP ConfReq id=0x1]
Tue Oct 19 07:34:00 2010 : rcvd [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
Tue Oct 19 07:34:00 2010 : ipcp: returning Configure-NAK
Tue Oct 19 07:34:00 2010 : sent [IPCP ConfNak id=0x1 <addr 10.0.1.216> <ms-dns1 10.0.1.29> <ms-dns3 10.0.1.29>]
Tue Oct 19 07:34:00 2010 : rcvd [IPV6CP ConfReq id=0x1 <addr XYZ>]
Tue Oct 19 07:34:00 2010 : Unsupported protocol 0x8057 received
Tue Oct 19 07:34:00 2010 : sent [LCP ProtRej id=0x2 80 57 01 01 00 0e 01 0a 02 1b 63 ff fe 99 35 cb]
Tue Oct 19 07:34:00 2010 : rcvd [LCP ProtRej id=0x2 82 35 01 01 00 04]
Tue Oct 19 07:34:00 2010 : rcvd [IPCP ConfAck id=0x1 <addr 10.0.1.29>]
Tue Oct 19 07:34:00 2010 : rcvd [IPCP ConfReq id=0x2 <addr 10.0.1.216> <ms-dns1 10.0.1.29> <ms-dns3 10.0.1.29>]
Tue Oct 19 07:34:00 2010 : ipcp: returning Configure-ACK
Tue Oct 19 07:34:00 2010 : sent [IPCP ConfAck id=0x2 <addr 10.0.1.216> <ms-dns1 10.0.1.29> <ms-dns3 10.0.1.29>]
Tue Oct 19 07:34:00 2010 : ipcp: up
Tue Oct 19 07:34:00 2010 : found interface en0 for proxy arp
Tue Oct 19 07:34:00 2010 : local IP address 10.0.1.29
Tue Oct 19 07:34:00 2010 : remote IP address 10.0.1.216
Tue Oct 19 07:34:00 2010 : l2tpwaitinput: Address added. previous interface setting (name: en0, address: 10.0.1.29), current interface setting (name: ppp0, family: PPP, address: 10.0.1.29, subnet: 255.0.0.0, destination: 10.0.1.216).
Tue Oct 19 07:34:00 2010 : rcvd [IP data <src addr 10.0.1.216> <dst addr 255.255.255.255> <BOOTP Request> <type INFORM> <client id 0x08000000010000> <parameters = 0x6 0x2c 0x2b 0x1 0xf9 0xf>]
Tue Oct 19 07:34:00 2010 : sent [IP data <src addr 10.0.1.29> <dst addr 10.0.1.216> <BOOTP Reply> <type ACK> <server id 0x0a00011d> <domain name "XYZ">]

Wrt54g can only connect to 1 l/top with wepkey

i have setup a wep key on my router but only 1 laptop can connect to it,how can i connect with another laptop please

I assume you are using windows XP operating System... So follow this steps ....
Uninstall the drivers for the Adapter from start >> All programs ....
>> Insert the Setup CD in the cd drive>> Click on Exit when the
Linksys welcome screen appears>>Click on start. Unplug & replug adapter ...>> There should be a "" Found New Hardware Wizard ""
that pops up on your screen>> Click on “Install software
automatically “, and then click on next. Once the installation is
complete>> Right click on the wireless network connection icon in the
system tray besides the clock >>Click on view wireless networks and
then connect to your network name.

Can only connect to Internet from one computer at a time on network

I have a 2 computer network in my office networked with an Asante 10/100 hub. The computers are a iMac 24 (Intel) and an old G4 (PCI). The network has worked fine until just recently. Now, I can only connect to the Internet with one computer at a time...(DSL connection). I checked cables, ports, etc, and I'm wondering if this is a 10.4.9 issue. Coincidentally, I noticed that I am not able to access the Internet via Win XP using Parallels which also worked fine up until recently. I checked with the ISP (AT&T) who confirmed that all is OK on their end. Anyone have similar problem? Could OS X 10.4.9 be the culprit? Any help on this will be much appreciated. Thanks.
iMac 24 Mac OS X (10.4.9) 2G RAM; NVIDIA GeForce 7600 GT 256

I'd consider that a 3 computer network, Parallels being a virtual machine would alias the ethernet interface and need its own IP address. That may or may not have anything to do with your problem. Actually, the way you've described things, it sounds like a lot has to do with your contract with ATT. Is there a routing device at your end?
The only way 10.4.9 could be the culprit would be if it were the routing device.
-Phil

I have an account for apple but this is not acceptable for i cloud. It say it is correct ID and password but this is not icloud account. So my phone can not connect with my computer and not synchronization too

I have an account for apple but this is not acceptable for i cloud. It say it is correct ID and password but this is not icloud account. So my phone can not connect with my computer and not synchronization too. Last a few months i have not use this phone. Just i start to use again. So most probably i gave my old mail address as a ID or password. So how can i clearing this subject. regards

ErolSinan wrote:
... there is no button for update between the About and Usage buttons in the General. ...
Correct. That is only a feature of iOS 5 or later...
ErolSinan wrote:
... yes my phone is 3G.
then it can only go as far as iOS 4.2.1

WRT45G: can only connect one pc at the time to internet, cannot login to router setup

Hello,
I don't get this. The complete network worked fine for ... years? After a call with the ISP about a general/different issue, we can now only connect one pc at the time to internet. (We were asked to take out cables and we've put them back).
I've been trying and searching for an answer for hours.
problem:
We can only connect through the router to internet with only one pc at the time (the first pc we connect after starting up the router).
Also we cannot get into the setup menu of the router at 192.168.1.1
We've been trying to reset the modem for 10, 30 seconds.
Auto resolve IP/DNS. DHCP is enabled.
I also remembered that I pushed the SES button, it turned from orange to flashing bluish. I never knew aboutthis function, nor it is mentioned in the manual I downloaded. Now this SES indicator is off.
Also WLAN and DMZ led are off.
I downloaded EasyLink_Connect.exe, went through the setup. It recognises there's internet connection, but stops and says: cisco does not support this modem.
Temp. replacing this WRT45G modem with another one did not resolve the issue.
I have no clue what went wrong, what we did wrong, and how we can resolve this issue? Please help! Thanks
Message Edited by Brammm on 11-27-2008 03:13 PM

Okay!
1. (results when having assigned a static IP) :
Windows IP-configuratie
         Primair DNS-achtervoegsel. . . . .:
        Knooppunttype: . . . . . . . . . .: onbekend     (unknown)
        IP-routering ingeschakeld. . . . .: nee      (no)
        WINS-proxy ingeschakeld . . . . . : nee    (no)
Ethernet-adapter LAN-verbinding:
         Verbindingsspec. DNS-achtervoegsel:
        Beschrijving . . . . . . . . . . .:
          VIA Compatable Fast Ethernet Adapter
        Fysiek adres. . . . . . . . . . . : 00-16-17-CE-D5-40
        DHCP ingeschakeld:. . . . . . . . : nee    (no)
        IP-adres. . . . . . . . . . . . . : 192.168.1.20
        Subnetmasker. . . . . . . . . . . : 255.255.255.0
        Standaardgateway. . . . . . . . . : 192.168.1.1
        DNS-servers . . . . . . . . . . . : 192.168.1.1
(results without having assigned a static IP: automatic config.) :
Ethernet-adapter LAN-verbinding:
        Verbindingsspec. DNS-achtervoegsel:
        Beschrijving . . . . . . . . . . .:
          VIA Compatable Fast Ethernet Adapter
        Fysiek adres. . . . . . . . . . . : 00-16-17-CE-D5-40
        DHCP ingeshakeld. . . . . . . . . : ja     (yes)
        Autom. configuratie ingeschakeld. : ja       (yes)
        IP-adres. . . . . . . . . . . . . : 84.30.99.32
Subnetmasker. . . . . . . . . . . : 255.255.254.0
Standaardgateway. . . . . . . . . : 84.30.98.1
DHCP-server . . . . . . . . . . . : 213.51.144.90
        DNS-servers . . . . . . . . . . . : 212.54.40.25
                                            212.54.35.25
2. I do have another router, when I try that one, the problem we have remains. So that's a bit strange to me. That one is supposed to be working.
Does this SES function configure anything other than the modem? So, does it alter PC configurations? I have no clue. We even start to wonder whether the ISP is able to set up their internet in a way that unables us to make use of a router? That would be ridiculous
Message Edited by Brammm on 11-30-2008 04:03 AM

HT4199 Every time I introduce the WPA2 passwords I can´t connect. I can only connect to open wi fi networks? Does anyone know why? Thanks

Every time I introduce the WPA2 passwords I can´t connect. I can only connect to open wi fi networks? Does anyone know why? Thanks

Some users with various Wi-Fi connection problems have reported that they were given the following instructions by Apple Support, sometimes with success. I can't vouch for this procedure myself. After completing the procedure, you'll have to recreate all your settings in the Network preference pane. Make sure you know how to do that before you begin. Taking screenshots of the preference pane may be helpful.
Step 1
Back up all data.
Triple-click the line below on this page to select it:
/Library/Preferences/SystemConfiguration
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Step 2
Reset the System Management Controller

I can't connect with Turkey!

Hi! I have a problem. I'm from Poland and can't connect with my friend from Turkey using Skype. It's strange coz she is the only one from my friends with whom i can't establish connection. And she is from Turkey. I talked to people from US, South Africa and other remote countries but I can't establish connection with Turkey! And i'm from Poland. Does Turkey block connection from Poland? She has the same problem. She can't connect only with me - she talks to people from all over the world expect me. Can you help me?
Solved!
Go to Solution.

muskagap wrote:
Oh, sorry, it's Marocco not Turkey
tell your friend to connect Skype through a proxy server:
http://community.skype.com/t5/Windows/Unblock-Skype-in-Oman/m-p/905294
Regards,
Tamim
Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

Can only connect from one direction

I'm having trouble video confrencing... I tried searching the forums, but I'm having trouble thinking of clever search terms.
I can only connect from one direction with one person. They can invite me to a chat and it works fine every time. However when I invite them it always fails. I can invite other people and it works fine though.
This doesn't seem like a typical router problem, because they can invite me and we videochat just fine.
This has been a problem for most versions of iChat that I can remember, but I'm using 3.1.5 currently.

Hi
Is the other person a PC user.
Tony

Can I connect with more than one iTunes acct

Can I connect with more than one iTunes acct

Laxman25 wrote:
If its multiple apple id's on one computer you can't because you have to log out of one and login on another.
I've only got one ID so I can't test but Winston says you can be signed into iTunes with multiple AppleIDs (i.e authorise iTunes for more than one ID content) at the same time, and that even different account content will stream so long as Home Sharing ID in iTunes matches AppleTV Home Sharing ID.
AC

TS1474 I changed my computer (old one is dead!) and now when I want to sync the contents of my iPod onto my new computer, it tells me I can only sync with one computer (i.e. the one that died!) How do I get around this??

I changed my computer (old Dell is dead!) and now when I want to sync the contents of my iPod onto my new computer (a Sony Vaio), it tells me I can only sync with one computer (i.e. the one that died!) How do I get around this??

-Transfer iTunes purchases to the compuer by:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
- Transfer other music by using a third-party program like one of those discusssed here:
Copy music
- Connect the Ipd to the computer and make a backup by right clicking on the iPod under Devices in iTunes and select Back Up
- Restore the iPod from that backup
Note that the backup that iTunes makes does not contain synced media like apps and music.

My iPhone 3GS is stocked on apple logo while restarting my iphone.Do I need to reinstall new IOS on it?Or how can I connect with my itunes again.Thanksssss..

My iPhone 3GS is stocked on apple logo while restarting my iphone. Do I need to reinstall new IOS on it?Or how can I connect with my itunes again.Thanksssss..

I having the same issue about the and iTunes says "The iPhone cannot be restored at this time because the iPhone software update server could not be contacted or is temporarily unavailable.". I've had the iPhone 3GS since it came out. It was working fine until I just tried to update it. It has never been hacked or jailbroken. We and a few others are having the same issue then it is more than likely that this is an update issue. I took mine to the Apple store and the tech tried to update it and he came to the same problem and told me he couldn't update it. My assumption is that we are not the only one's with this issue and that if there was a way to update it to the update before this last one it might be a solution. I don't know how to get the previous update. Apple probably is aware of the problem, and hasn't come up with a solution yet. Or, enough people haven't complained yet. The tech suggested that there might be something wrong with the phone itself, but that couldn't be since it was working perfectly before I updated it and others are having the same issue. It is highly unlikely that a lot of people are not having the same hardware issue all of a sudden at the same time.

E70 can only connect with Linksys by Easy WLAN

Similar Messages

Maybe you are looking for