E70: cannot load IR modem driver

I upgraded the FW to the latest version, I have the latest PC Suite installed and still I cannotuse the E70 with my laptop for dialup GPSR connections. It seems PC suite does not automaticly install the correct drivers for IR modems. I now use the standard one, but I get the message 'cannot connect to the network'. If I go to the option, I only can pick the 'standard modem over IR link'.
On the Nokia site there's a special IR-driver ( an inf.file) for the E70. I downloaded this but it will not install. Even if I try all the basic windows setup install procedures this file is refused. It is seen OK if I go the the option where you select your own drivers, only it will not install. A totally mysterious thing. Is the file corrupt? Is something wrong with my W2K-version.
I remember I had this thing before with other drivers, but one way or the other I always managed to get around this. Now I can't find a solution. Trouble is I cannot use the E70 to connect my PC to the web while I'm traveling.
Anyone with a brilliant solution??
(PS. I don't want to use a cable and I don't want to use bluetooth. I want to get the IR-link working on the E70.)Message Edited by rusco on 25-Oct-2006
05:22 PM
Owner Nokia 520 (experiment: serious problems connecting pop accounts).
History: Siemens S4, Sony Z1, Ericsson SH888, Siemens s40, Nokia 6230, Nokia E70. Nokia E71-1, E72-1, HTC Wildfire (good stuff), HTC One V (also nice).
(And sometimes I still miss my Psion Revo! ;-)

Took a while, but I tried the USB cable and with this connection I have no problem making contact with T-mobile.
So I still don't understand. How can I actually change the standard IR-modem driver thatis included in the Nokia Suite with the special E70 modem driver that I already downloaded? I hope some Nokia E70-W2K specialist has a good tip!Message Edited by rusco on 22-Nov-2006
06:15 PM
Owner Nokia 520 (experiment: serious problems connecting pop accounts).
History: Siemens S4, Sony Z1, Ericsson SH888, Siemens s40, Nokia 6230, Nokia E70. Nokia E71-1, E72-1, HTC Wildfire (good stuff), HTC One V (also nice).
(And sometimes I still miss my Psion Revo! ;-)

Similar Messages

Windows cannot load the device driver for this hardware. The driver may be corrupted or missing.

I'm having the error "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)" and I can't read/write CDs/DVDs. When I try to update the driver I have the message that it is already up to date.
I can't find the driver to dowload and try to fix the problem. Where can I download it or solve somehow my problem?

Hi juigarashi,
Microsofts automated troubleshooting service on the link below may help
CD/DVD Repair
Hope it works for you.
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Cannot load a FAx driver for a Hp Laserjet 1536dnf MFP on a HP Pavilion Elite e9220y Computer

I cannot find a fax driver for this printer to install on my computer.
I have uninstalled and reinstalled the printer a couple of times It will print and scan but not fax.
I reinstalled fron the orignal disk and off the HP website neither get me fax capablilites.
I have gone to support and cannot find the drive on eith er the printer or computers web page at HP.Com
Please let me know what to do.

Hi @thesaneone4 ,
I see that you are experiencing issues with the fax driver not installing. I would be happy to help you.
Check the connections in the Device Manager for any printer entries, under Universal Serial Bus Controllers look for Fax LEDM or any unknown devices. Right click and try to update the driver. How do I get into Windows Device Manager?
In the Devices and Printers window, what icons do you have for the printer showing?
If you are still having issues, you will need to uninstall the printer software from the CD and unlock the hidden Admin Account when installing the printer software, to make sure there isn't any interference.
Disconnect the USB cable.
Uninstall the software by going to Start, Computer, right click on the CD and open it, then double click on uninstall.
Then download and run the latest software. HP LaserJet Pro M1536dnf Multifunction Printer.
Unlock Hidden Administrator Account and install the printer on this account:
Go to your Start menu and under the 'search programs and files' box type CMD.
CMD will populate as a search option above, just right click on it and 'run as administrator'.
Once CMD (Command Prompt) opens, type net user administrator /active:yes and hit enter.
Next, close CMD and restart your computer.
When your computer comes on log into the new account that should show. It will be called Administrator and will not have a password on it.
If your computer automatically logs into your account after restart than go to your start menu click the arrow beside 'shutdown' and choose 'switch user'. Now log into the Administrator account we just unlocked.
Under the Administrator account, install the printer software.
Test the printer.
To turn off the Admin account start back at step 1 and type in net user administrator /active:no.
Please let me know the outcome.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Cannot load two cdrom drives, (code 10)

if i try to have two cdrom drives running at the same time, a dvdrom drive and a cdrw drive, the cdrw drive has an error. it says "This device cannot start. (Code 10)" how can i fix this?
If i try to use either individually it will work, i don't understand what Code 10 is though.

I have major probs with ide as well when I have all of the slots filled. I have an 80 gig and a 20 gig as well as a cd reader and writer. When I used the 20 gig attached (a fugitsu) in several differant place once as slave to the 80 and then as master to the writer after a couple of reboots I noticed that when the fugitsu was getting listed by the bios something strange happened it showed up in upper and lower case letters. I never saw that happen before but after I noticed it I could no longer access the drive in windows and the bios detected it as a 14? gig drive using auto and trying it manually. This occurred twice and on differant channels. This did not correct itself by resetting the bios or shutting down the power. I was only able to correct it by physically removing the drive. I put back and it was normal again but it did it again later so I just pulled it. So in my opinion this board has some ide issues in addition to being one of the most picky boards I have seen when it comes to slave and master position on the cables. And theres another joke why in gods name is the master supposed to be attached on the end of the ide 80pin cable when in every computer the hd is below the cdr makes thing a real pain in the ass.
ps the iomagic 24x10x40 drive is a btc remark and I am using it again due to its ability to burn safedisk2 cd's but I liked the 20 gig to boot into linux becuz the 80 gig has probs with grub and lilo and trying to "correct " made XP unbootable and partition magic choked as well

Cannot load or find Driver, Port_#0005.Hub_#0004

Hi all,
I just installed a new sdd and I'm reinstalling all my drivers but I can't seem to find one driver. It says it is in, Port_#0005.Hub_#0004. My computer is a T510 (4313). I've tried windows update and the lenovo drivers update as well and neither one works for me.
Thanks for the help.

Hiyomika wrote:
Hi all,
I just installed a new sdd and I'm reinstalling all my drivers but I can't seem to find one driver. It says it is in, Port_#0005.Hub_#0004. My computer is a T510 (4313). I've tried windows update and the lenovo drivers update as well and neither one works for me.
Thanks for the help.
What I would try (in this order) is a Bios update, Chipset Driver Update and then uninstall all of the USB hubs appearing in Device Manager, reboot. Run the Thinkvantage System Update last to do a cleanup. That SHOULD catch it

Cannot load device driver

Hello, After upgrading to Windows 7 Ultimate, my drive quit working entirely. The description reads: "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing". I've downloaded updates and don't know whether I should uninstall or what... please help
This question was solved.
View Solution.

Hi,
First, try the automated fixit from Microsoft on the link below.
Windows 7
Check if the drive is now working.
If the drive is not working, from the Start Menu, open the Control Panel and click on Device Manager. Click to open the IDE ATA/ATAPI Controllers. Right click on the first channel and select uninstall. Do not delete drivers if asked. When uninstalled repeat the process for each channel. Also if an ATA controller is listed, right click and uninstall this, again not deleting drivers if asked. Then open DVD/CD-ROM Drives. Right click the drive and select uninstall. Do not delete drivers if asked.
Reboot the PC and let Windows reinstall the devices. Check the drive again.
If it still isn't working, run the automated fixit from Microsoft on the link below again.
Windows 7
Next, from the Start Menu, open the Control Panel and click on Device Manager. Next click to open DVD/CD-ROM Drives. Right click the drive and select uninstall. Do not delete drivers if asked. When the device has uninstalled click on the 'Scan for Hardware Changes' icon ( usually just below Help on the toolbar ). Let windows reinstall the drive and see if it now works.
Best wishes,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Cannot load device driver for DVD/CDRW - Satellite 1110

I have a Satellite 1110 and something has gone wrong with my DVD/CDRW and it will not read any CDs. It is reported as a MAT****A UJDA730 DVD/CDRW but the device status comes up as:
"Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)"
I have tried uninstalling and reinstalling the device but the error just returns. I cannot find a driver for it either on the manufacturer's web site or Toshiba's. I don't want to use the Product Recovery CD-ROM as it implies I will lose all software and data on the hard drive.
Can someone advise how to recover from this situation?
Thanks

Hi
Firstly you dont any driver for the CD/DVD drive. The drive uses the standard Windows OS driver and its not necessary to install it additional.
I assume there could be something wrong with the registry entry.
Please check this forum posting:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=13843
The user has used the instruction which was offered on the Microsoft site.
This should help.
Please post again if this method was successful.

Loading Sharp printer driver on iMac

Hi, I have just come back to Mac after 15 years and in setting up my new computer, I cannot load the Printer Driver for a Sharp ARM205 laser printer. I have downloaded the latest Mac driver from Sharp and I can see the file in the Downloads Folder but cannot work out how to load it. The computer can see the printer but with no driver, no printing after many attempts. Any tips appreciated.

Hello and welcome back to Mac
If you select the driver file in Downloads and perform a Get Info (Command I or File > Get Info), the Get Info will show you under the heading of Name & Extension what format the file is. Note that you may need to click the little triangle next to Name & Extension to expand the view.
With OS X 10.5 and 10.6, there is a built in function to create a compressed zip file. If this is the extension of the driver, simply double click to decompress the download. It will automatically create a folder for the driver in the same Downloads folder. If the file format is something other than zip, you may need Stuffit or something similar to unpack the file. Please reply with the extension name.
Also, under the Name & Extension menu is the Open With section. If you expand this entry, you will see what application on the Mac is set to open these files types. If no application is listed, then as mentioned already you may have to download a utility to unpack the file.
Pahu

Equium - Windows can't load the device driver for USB dongle

I have been using a dongle without problems for about a month, however now it is saying (in device manager ) "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)"
what does this mean and how can i fix it?

hi it's a vodafone 3gb cheap as chips dongle
it's an equium a200 i think
everything cam as one on the dongle, it uninstalled ok after initial problem, but now won't acknowledge it is in fact a dongle, just a 'usb mass filter' something or other?
i know i sound completely stupid, but when it comes to technology i am!

SOA WebLogic : Cannot load JDBC driver class

Hi, I'm new to this Oracle SOA World. Currently I'm trying to configure environment on my system. I found a very useful document to install all related SOA component to my system, the document name was 'Quick Start Guide for Oracle® SOA Suite 11gR1 (11.1.1.5.0)'. I did all the steps written in the document and have installed all the components successfully, component including Database, Jdevelper, WebLogic Server, RCU, SOA suite, service bus, all are installed successfully.
But when I'm trying to Configure Application Server (start -> Oracle SOA 11g-Home1), at one step 'Configure JDBC Component Schema' , here I'm getting this message
* The driver class listed below was not found in product installation
vendor: Derby
Driver: org.apache.derby.jdbc.clientdriver
A Test will not be performed on any database connections using this driver
In addition, when i just ignore this message and continue installation, after installation when i run weblogic server then it gives error and gets terminated
here is weblogic server log:
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
Listening for transport dt_socket at address: 8453
java version "1.6.0_24"
Java(TM) SE Runtime Environment (build 1.6.0_24-b50)
Java HotSpot(TM) Client VM (build 19.1-b02, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xdebug -Xnoagent -Xrunjdwp:transpo
rt=dt_socket,address=8453,server=y,suspend=n -Djava.compiler=NONE -Xms512m -Xmx
1024m -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=AdminServer -Djava.
security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Xveri
fy:none -Xverify:none -da:org.apache.xmlbeans... -ea -da:com.bea... -da:javeli
n... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.sbcons
ole... -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE
~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dcom
mon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apach
e.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=
C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~2 -Djrockit.optfile=C:\Oracle\MIDDLE~
1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.
dir=C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~2\config\FMWCON~1\servers\AdminSe
rver -Doracle.domain.config.dir=C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~2\con
fig\FMWCON~1 -Digf.arisidbeans.carmlloc=C:\Oracle\MIDDLE~1\USER_P~1\domains\BAS
E_D~2\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Oracle\MIDDLE~1\USER_P~1\
domains\BASE_D~2\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:\
Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~2\config\fmwconfig\jps-config.xml -Dorac
le.deployed.app.dir=C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~2\servers\AdminSe
rver\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirector
y=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\O
RACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.md
s.net.protocol"|"oracle.fabric.common.classloaderurl.handler"|"oracle.fabric.com
mon.uddiurl.handler"|"oracle.bpm.io.fs.protocol -Dweblogic.jdbc.remoteEnabled=f
alse -da:org.apache.xmlbeans... -Dsoa.archives.dir=C:\Oracle\Middleware\Oracle_
SOA1\soa -Dsoa.oracle.home=C:\Oracle\Middleware\Oracle_SOA1 -Dsoa.instance.home=
C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~2 -Dtangosol.coherence.clusteraddress
=227.7.7.9 -Dtangosol.coherence.clusterport=9778 -Dtangosol.coherence.log=jdk -D
javax.xml.soap.MessageFactory=oracle.j2ee.ws.saaj.soap.MessageFactoryImpl -Dwebl
ogic.transaction.blocking.commit=true -Dweblogic.transaction.blocking.rollback=t
rue -Djavax.net.ssl.trustStore=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrus
t.jks -Dem.oracle.home=C:\Oracle\Middleware\oracle_common -Djava.awt.headless=tr
ue -Dums.oracle.home=C:\Oracle\Middleware\Oracle_SOA1 -Dweblogic.management.disc
over=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dwe
blogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sysext_manifes
t_classpath;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_c
lasspath weblogic.Server
Listening for transport dt_socket at address: 8453
<2012-mar-02 kl 21:14 CET> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE
Provider self-integrity check for better startup performance. To enable this ch
eck, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<2012-mar-02 kl 21:14 CET> <Info> <Security> <BEA-090906> <Changing the default
Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable th
is change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<2012-mar-02 kl 21:14 CET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLog
ic Server with Java HotSpot(TM) Client VM Version 19.1-b02 from Sun Microsystems
Inc.>
<2012-mar-02 kl 21:14 CET> <Info> <Management> <BEA-141107> <Version: WebLogic S
erver 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
<2012-mar-02 kl 21:14 CET> <Notice> <WebLogicServer> <BEA-000365> <Server state
changed to STARTING>
<2012-mar-02 kl 21:14 CET> <Info> <WorkManager> <BEA-002900> <Initializing self-
tuning thread pool>
<2012-mar-02 kl 21:14 CET> <Notice> <Log Management> <BEA-170019> <The server lo
g file C:\Oracle\Middleware\user_projects\domains\base_domain\servers\AdminServe
r\logs\AdminServer.log is opened. All server side log events will be written to
this file.>
<2012-mar-02 kl 21:14 CET> <Notice> <Security> <BEA-090082> <Security initializi
ng using security realm myrealm.>
<2012-mar-02 kl 21:14 CET> <Warning> <oracle.as.jmx.framework.MessageLocalizatio
nHelper> <J2EE JMX-46041> <The resource for bundle "oracle.jrf.i18n.MBeanMessage
Bundle" with key "oracle.jrf.JRFServiceMBean.checkIfJRFAppliedOnMutipleTargets"
cannot be found.>
<2012-mar-02 kl 21:14 CET> <Notice> <WebLogicServer> <BEA-000365> <Server state
changed to STANDBY>
<2012-mar-02 kl 21:14 CET> <Notice> <WebLogicServer> <BEA-000365> <Server state
changed to STARTING>
<2012-mar-02 kl 21:15 CET> <Critical> <JTA> <BEA-110482> <A logging last resourc
e failed during initialization. The server cannot boot unless all configured log
ging last resources (LLRs) initialize. Failing reason:
weblogic.common.resourcepool.ResourceSystemException: Cannot load driver class:
org.apache.derby.jdbc.ClientDriver
weblogic.common.resourcepool.ResourceSystemException: Cannot load driver class:
org.apache.derby.jdbc.ClientDriver
at weblogic.jdbc.common.internal.JDBCUtil.parseException(JDBCUtil.java:3
01)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.loadDriver(Connect
ionEnvFactory.java:75)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.<init>(ConnectionE
nvFactory.java:131)
at weblogic.jdbc.common.internal.ConnectionPool.initPooledResourceFactor
y(ConnectionPool.java:712)
at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.
java:235)
Truncated. see log file for complete stacktrace
>
<2012-mar-02 kl 21:15 CET> <Error> <Deployer> <BEA-149205> <Failed to initialize
the application 'wlsbjmsrpDataSource' due to error weblogic.application.ModuleE
xception: .
weblogic.application.ModuleException:
at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:302)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(Modu
leListenerInvoker.java:199)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(Depl
oymentCallbackFlow.java:517)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineD
river.java:52)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(Dep
loymentCallbackFlow.java:159)
Truncated. see log file for complete stacktrace
Caused By: weblogic.common.resourcepool.ResourceSystemException: Cannot load dri
ver class: org.apache.derby.jdbc.ClientDriver
at weblogic.jdbc.common.internal.JDBCUtil.parseException(JDBCUtil.java:3
01)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.loadDriver(Connect
ionEnvFactory.java:75)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.<init>(ConnectionE
nvFactory.java:131)
at weblogic.jdbc.common.internal.ConnectionPool.initPooledResourceFactor
y(ConnectionPool.java:712)
at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.
java:235)
Truncated. see log file for complete stacktrace
>
<2012-mar-02 kl 21:16 CET> <Alert> <OSB Security> <BEA-387068> <There is no PKI
credential mapper provider configured in your security realm. Service key provid
er management will be disabled. Configure a PKI credential mapper provider if yo
u need service provider support. This is typically the case if you have Oracle S
ervice Bus proxy services with web service security enabled or outbound 2-way SS
L connections.>
<2012-mar-02 kl 21:16 CET> <Warning> <Coherence> <BEA-000000> <Oracle Coherence
3.6.0.4 (member=n/a): Local address "127.0.0.1" is a loopback address; this clus
ter node will not connect to nodes located on different machines>
<2012-mar-02 kl 21:17 CET> <Warning> <J2EE> <BEA-160140> <Unresolved optional pa
ckage references (in META-INF/MANIFEST.MF): [Extension-Name: oracle.applcore.mod
el, Specification-Version: 0.1, Implementation-Version: 11.1.1.0.0, referenced f
rom: C:\Oracle\Middleware\user_projects\domains\base_domain\servers\AdminServer\
tmp\_WL_user\usermessagingserver\a7bt7z]. Make sure the referenced optional pack
age has been deployed as a library

Hi:
try placing the jars that represent ur driver, here
For both Windows and Linux, you must perform the following steps:
Drop the vendor-specific driver JAR files to the user_projects/domains/soainfra/lib directory.
Drop the vendor-specific driver JAR files to the <Weblogic_Home>/server/lib.
Edit the classpath to include the vendor-specific jar file in <Weblogic_HOME>/common/bin/commEnv.sh
This info was copied, from here: http://docs.oracle.com/cd/E21764_01/integration.1111/e10231/adptr_db.htm#CHDBEJDC
Hope this helps
best

I cannot load Maverick on my iMac HD. It reports that my HD is used for Time Machine backups and will not load to that drive. I do not use this drive for backups. Help.

I cannot load Maverick on my iMac HD. It reports that my HD is used for Time Machine backups and will not load to that drive. I do not use this drive for backups. I use an external 1 TB WD My Book for backups as well as Super Duper Backups. Can anyone offer advice. Thanks.

Welcome to Apple Support Communities
You have got the "Backups.backupdb" folder in the root level of your hard drive. This is the folder used by Time Machine to save backups to, and the OS X Mavericks installer thought that your hard drive is being used to store Time Machine backups
To fix this, open a Finder window, select the Go menu (on the menu bar) > Go to Folder, and type:
Then, delete "Backups.backupdb" and empty the Trash. Finally, open the Mavericks installer from the Applications folder and follow the steps

Java.sql.SQLException: Cannot load JDBC driver class 'null'

Hi,
I am a beginner of using jdbc, i use the tomcat4.1.x, mysql3.23.54 and it's jdbc driver 2.0.14. I place the drive <in jar file> in tomcat/commons/lib and configure the server.xml, web.xml and some testing coding. But there are some error like the following:
java.sql.SQLException: Cannot load JDBC driver class 'null'
     at org.apache.commons.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:529)
     at org.apache.commons.dbcp.BasicDataSource.getConnection(BasicDataSource.java:312)
     at foo.DBTest.init(DBTest.java:18)
     at org.apache.jsp.test_jsp._jspService(test_jsp.java:48)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:136)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:204)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:289)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:240)
of course its some of the error code and there are more.
Why I have this problems and how can I fix it? Can someone help me??
Thanks,
Tong
I place my test.jsp at tomcat/webapps/DBTest and DBTest.java at tomcat/webapps/DBTest/WEB-INF/classes/foo
additional of the tomcat/conf/server.xml
<Resource name="TestDB" auth="Container" type="javax.sql.DataSource" description="MySQL TestDB"/>
<ResourceParams name="TestDB">
<parameter><name>factory</name>
<value>org.apache.commons.dbcp.BasicDataSourceFactory</value>
</parameter>
<parameter><name>maxActive</name><value>10</value></parameter>
<parameter><name>maxIdle</name><value>1</value></parameter>
<parameter><name>maxWait</name><value>10000</value></parameter>
<parameter><name>username</name><value>javauser</value></parameter>
<parameter><name>password</name><value>javadude</value></parameter>
<parameter>
<name>driverClassName</name>
<value>org.gjt.mm.mysql.Driver</value>
</parameter>
<parameter>
<name>url</name>
<value>jdbc:mysql://localhost:3306/javatest?autoReconnect=true</value>
</parameter>
</ResourceParams>
tomcat/webapps/DBTest/WEB-INF/web.xml :
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app PUBLIC
"-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<description>MySQL Test App</description>
</web-app>

Post the part of your code that loads the driver and connects. My guess is you are using a variable for the name of the driver and the variable has not been set to anything(intially set to null).
Thanks
Cardwell

Java.sql.SQLException: Cannot load JDBC driver

THis topic has been discussed many many times but I still not able to connect to Oracle 8i from my servlet using Tomcat 4.1.12 on hp-ux and java1.3
I always got: java.sql.SQLException: Cannot load JDBC driver class 'null'
In server.xml:
<Context Path="/MyApp" docBase="MyApp" debug="0" reloadable="true" >
<Resource name="jdbc/ora" auth="Container" type="javax.sql.DataSource"/> <ResourceParams name="jdbc/ora" >
<parameter>
<name>username</name>
<value>myname</value>
</parameter>
<parameter> <name>password</name>
<value>mypassword</value>
</parameter>
<parameter> <name>driverClassName</name>
<value>oracle.jdbc.driver.OracleDriver</value>
</parameter>
<parameter>
<name>url</name>
<value>jdbc:oracle:thin:@myhostname:1521:ora</value>
</parameter> </ResourceParams>
</Context>
In MyApp/WEB-INF/web.xml:
<resource-ref>
<res-ref-name>jdbc/ora</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
The Oracle jdbc jar file classes12.jar is under common/lib in Tomcat's home. read Permission is there.
In the servlet:
init(ServletConfig config):
Context init = new InitialContext();
Context ctx = (Context) init.lookup("java:comp/env");
dataSource = (DataSource) ctx.lookup("jdbc/acdb");
doPost(..)
the error occured at :
synchronized (dataSource){
con = dataSource.getConnection();}
Thanks in advance!

Everything looks correct to me, except for one thing.
In your web.xml you have this:
<res-ref-name>jdbc/ora</res-ref-name> In your server.xml, you have this tag, which matches your web.xml:
<ResourceParams name="jdbc/ora" > But in your Java code, you've got this:
dataSource = (DataSource) ctx.lookup("jdbc/acdb"); When I've successfully set up a Web app data source, all three names had to agree. You either need to change your Java lookup name to "jdbc/ora" or change the web.xml and server.xml to "jdbc/acdb".
See if that does it. Everything else sounds correct to me. - MOD

Kernal Panic: Cannot load OS X from any Internal Drive

On Sunday evening I opened my trusty Macbook Pro 7,1 (13" Mid 2010) and all had locked up. Nothing would respond - just a beachball. I powered off and attempted to start back up again. It went straight to recovery. Disk Utility reports a fault with the Hard Drive's EFI Partition. I cannot load hardware diagnostics - screen shot attached of error
I swapped out the Hard Drive and attempted to reinstall via internet recovery however this would fail at the point of starting the Yosemite installation. (a not very helpful message from memory). The date was set correctly.
If however I mount the drive via USB I can reinstall Yosemite just fine and run OS X perfectly normally from USB. If I take that disk and install it internally OS X wont load and I get the Kernel Panic Below.
Anonymous UUID:
E4C66E36-4C11-B193-6400-263851954BFF
Wed Feb 25 12:17:50 2015
*** Panic Report ***
panic(cpu 1 caller 0xffffff80197c1694): "launchd died\nState at Last Exception:\n\n"@/SourceCache/xnu/xnu-2782.10.72/bsd/kern/kern_exit.c:361
Backtrace (CPU 1), Frame : Return Address
0xffffff811937be50 : 0xffffff801932fe41
0xffffff811937bed0 : 0xffffff80197c1694
0xffffff811937bf40 : 0xffffff80197c135c
0xffffff811937bf50 : 0xffffff801984b386
0xffffff811937bfb0 : 0xffffff8019436e86
BSD process name corresponding to current thread: launchd
Mac OS version:
14C109
Kernel version:
Darwin Kernel Version 14.1.0: Mon Dec 22 23:10:38 PST 2014; root:xnu-2782.10.72~2/RELEASE_X86_64
Kernel UUID: DCF5C2D5-16AE-37F5-B2BE-ED127048DFF5
Kernel slide:
0x0000000019000000
Kernel text base: 0xffffff8019200000
__HIB text base: 0xffffff8019100000
System model name: MacBookPro7,1 (Mac-F222BEC8)
System uptime in nanoseconds: 84906043459
last loaded kext at 2639784069: com.apple.driver.AppleUSBTCButtons    240.2 (addr 0xffffff7f9b1ea000, size 20480)
loaded kexts:
com.apple.driver.AppleUSBTCButtons    240.2
com.apple.driver.AppleFileSystemDriver    3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    35
com.apple.driver.AppleIRController    327.5
com.apple.driver.AppleUSBTCKeyEventDriver    240.2
com.apple.driver.AppleUSBTCKeyboard    240.2
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCIBlockStorage    2.7.0
com.apple.iokit.SCSITaskUserClient    3.7.3
com.apple.driver.AppleUSBCardReader    3.5.1
com.apple.iokit.AppleBCM5701Ethernet    10.1.3
com.apple.driver.AirPort.Brcm4331    800.20.24
com.apple.driver.AppleUSBHub    705.4.2
com.apple.driver.AppleUSBOHCI    656.4.1
com.apple.driver.AppleFWOHCI    5.5.2
com.apple.driver.AppleAHCIPort    3.1.0
com.apple.driver.AppleUSBEHCI    705.4.14
com.apple.driver.AppleSmartBatteryManager    161.0.0
com.apple.driver.AppleRTC    2.0
com.apple.driver.AppleHPET    1.8
com.apple.driver.AppleACPIButtons    3.1
com.apple.driver.AppleSMBIOS    2.1
com.apple.driver.AppleACPIEC    3.1
com.apple.driver.AppleAPIC    1.7
com.apple.driver.AppleIntelCPUPowerManagementClient    218.0.0
com.apple.nke.applicationfirewall    161
com.apple.security.quarantine    3
com.apple.security.TMSafetyNet    8
com.apple.driver.AppleIntelCPUPowerManagement    218.0.0
com.apple.driver.AppleUSBMultitouch    245.2
com.apple.iokit.IOUSBHIDDriver    705.4.0
com.apple.iokit.IOSCSIBlockCommandsDevice    3.7.3
com.apple.iokit.IOUSBMassStorageClass    3.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily    3.7.3
com.apple.driver.AppleUSBMergeNub    705.4.0
com.apple.driver.AppleUSBComposite    705.4.9
com.apple.iokit.IOEthernetAVBController    1.0.3b3
com.apple.driver.mDNSOffloadUserClient    1.0.1b8
com.apple.iokit.IO80211Family    710.55
com.apple.iokit.IONetworkingFamily    3.2
com.apple.iokit.IOFireWireFamily    4.5.6
com.apple.driver.AppleMCP89RootPortPM    1.11
com.apple.iokit.IOAHCIFamily    2.7.5
com.apple.driver.AppleEFINVRAM    2.0
com.apple.iokit.IOUSBFamily    710.4.14
com.apple.driver.NVSMU    2.2.9
com.apple.driver.AppleEFIRuntime    2.0
com.apple.iokit.IOHIDFamily    2.0.0
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    300.0
com.apple.kext.AppleMatch    1.0.0d1
com.apple.driver.AppleKeyStore    2
com.apple.driver.AppleMobileFileIntegrity    1.0.5
com.apple.driver.AppleCredentialManager    1.0
com.apple.driver.DiskImages    396
com.apple.iokit.IOStorageFamily    2.0
com.apple.iokit.IOReportFamily    31
com.apple.driver.AppleFDEKeyStore    28.30
com.apple.driver.AppleACPIPlatform    3.1
com.apple.iokit.IOPCIFamily    2.9
com.apple.iokit.IOACPIFamily    1.4
com.apple.kec.corecrypto    1.0
com.apple.kec.Libm    1
com.apple.kec.pthread    1
Model: MacBookPro7,1, BootROM MBP71.0039.B0E, 2 processors, Intel Core 2 Duo, 2.4 GHz, 8 GB, SMC 1.62f7
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54333531533641465238432D47372020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54333531533641465238432D47372020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.24)
Bluetooth: Version 4.3.2f6 15235, 3 services, 27 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
USB Device: Internal Memory Card Reader
USB Device: HD-PCTU3
USB Device: Built-in iSight
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
USB Device: IR Receiver
USB Device: Apple Internal Keyboard / Trackpad
Thunderbolt Bus:
I reckon that this will be a hardware error however as for where I cannot say. Anyone able to offer advise?

Generally if you can boot the MBP from an external HDD and not boot the MBP with that drive internally, the SATA connection is usually the problem. Replacement of the cable will usually solve the issue.
I suggest that you take the MBP to an Apple store genius bar for a definitive evaluation. The repair is not expensive.
Ciao.

Cannot load JDBC driver class 'com.microsoft.jdbc.sqlserver.SQLServerDriver

Hi,
i am doing a forum application.
i am trying to connect database connection through javax.sql.DataSource.
I am using Eclipse editor for developing this application and i am using sql server 2000 database.
i have create a servlet file.
here is the coding.
DatabaseGetConnection.java
`````````````````````````````````````````
import java.io.IOException;
import java.sql.Connection;
import java.sql.SQLException;
import javax.naming.Context;
import javax.naming.InitialContext;
import javax.naming.NamingException;
import javax.servlet.ServletConfig;
import javax.servlet.ServletException;
import javax.servlet.ServletOutputStream;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import javax.sql.DataSource;
public class DatabaseGetConnection extends javax.servlet.http.HttpServlet implements javax.servlet.Servlet {
private Connection con=null;
private DataSource ds=null;
public DatabaseGetConnection() throws ServletException {
super();
public DatabaseGetConnection(final HttpServletRequest req, final HttpServletResponse res) throws ServletException, IOException {
this.doPost(req, res);
public void init() throws ServletException {
try
final Context initContext = new InitialContext();
final Context envContext = (Context)initContext.lookup("java:/comp/env");
this.ds = (DataSource)initContext.lookup("jdbc/mySQLServer");
}catch(final NamingException ne)
ne.printStackTrace();
}catch(final Exception e)
e.printStackTrace();
public DataSource getDS()
System.out.println("Datasource method calling");
if (this.ds!=null)
System.out.println("Datasource not null");
}else
System.out.println("Datasource null");
return this.ds;
public Connection getCon()
try
this.con=this.getDS().getConnection();
if (this.con!=null)
System.out.println("Connection Successfull");
}catch(final SQLException se)
System.out.print("Connection Establishment Error : ");
se.printStackTrace();
return this.con;
I have configured server.xml. here is the configuration
server.xml
````````````````
<GlobalNamingResources>
<Resource name="jdbc/mySQLServer" global="jdbc/mySQLServer" auth="Container"
type="javax.sql.DataSource" factory="org.apache.tomcat.dbcp.dbcp.BasicDataSourceFactory" driverClassName="com.microsoft.jdbc.sqlserver.SQLServerDriver"
url="jdbc:microsoft:sqlserver://localhost:1433;DatabaseName=forum;SelectMethod=cursor"
username="sa" password="sa" maxActive="20" maxIdle="10"
maxWait="-1"/>
</GlobalNamingResources>
here is the web.xml file
``````````````````````````````````
<resource-ref>
<res-ref-name>jdbc/mySQLServer</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
is this configuration correct? plz help me about the configuration and coding through Eclipse.
i have run the application and i got the error. here is the error details
org.apache.tomcat.dbcp.dbcp.SQLNestedException: Cannot load JDBC driver class 'com.microsoft.jdbc.sqlserver.SQLServerDriver'
at org.apache.tomcat.dbcp.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:766)
at org.apache.tomcat.dbcp.dbcp.BasicDataSource.getConnection(BasicDataSource.java:540)
at com.forum.database.DatabaseGetConnection.getCon(DatabaseGetConnection.java:85)
at com.forum.database.DatabaseGetConnection.GetAllTopicSearch(DatabaseGetConnection.java:101)
at org.apache.jsp.test_jsp._jspService(test_jsp.java:73)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:98)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:328)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:315)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:265)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:269)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:210)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:174)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:108)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:151)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:870)
at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:665)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:528)
at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:81)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:685)
at java.lang.Thread.run(Unknown Source)
Caused by: java.lang.ClassNotFoundException: com.microsoft.jdbc.sqlserver.SQLServerDriver
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at org.apache.tomcat.dbcp.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:760)
... 24 more
thanks and regards,
k.s.kumar

Please don't multipost, it's rude: http://forum.java.sun.com/thread.jspa?threadID=5219591
Please continue on that thread.

E70: cannot load IR modem driver

Similar Messages

Maybe you are looking for