E70 is not authenticating to server ... so mail is...

I setup my email account on E70, set credentials on both incoming and outgoing settings.
I can retrieve/fetch mail from IMAP server.
PROBLEM: I cannot send outgoing emails because authentication is not happening.
Tests done:
-) the server accepts authentication
-) authentication works with pc email client
-) sniffed network and found E70 is not attempting authentication
Firmware is latest: 3.0633.09.04
Nokia Model: E70-1
CODE: 0526646
following is the sniffed exchange
220 ESMTP service ready Sat, 9 Jun 2007 11:21:42 +0200
EHLO [10.10.10.120]
250-mx2.acme.com Hello [10.10.10.120] ([x.y.z.33]), pleased to meet you
250-AUTH LOGIN
250-DSN
250-SIZE
250-8BITMIME
250 PIPELINING
RSET
250 Reset state
MAIL FROM:[email protected]
250 [email protected].. Sender OK
RCPT TO:[email protected]
554 Relay rejected for policy reasons.
QUIT
Any help is appreciated

nop, I lost my E70, and changed to an E90 Communicator.
I do not have this problem on Communicator, although I have another old annoying problem I have had with many E series Nokia phones: from time to time, the account gets messed up (i.e. it does not download mail anymore) and there is no way to recover it except deleting it and recreating from scratch. I once called Nokia support and the operator answer was: "let's try to create a new account and see if it works" That was exactly the thing I was complaining about, so I gently terminated the conversation and concluded there is no support from Nokia to end users. I have tested iPhone, and as a phone, it is still immature, but the email client is a lot better. I am really looking into next releases of iPhone to see if I can switch away from Nokia. I hope Nokia gets a wake up call from posts like these before it gets it from sales ...

Similar Messages

E70 is not authenticating to SMTP server

I setup my email account on E70, set credentials on both incoming and outgoing settings.
I can retrieve/fetch mail from IMAP server.
PROBLEM: I cannot send outgoing emails because authentication is not happening.
Tests done:
-) the server accepts authentication
-) authentication works with pc email client
-) sniffed network and found E70 is not attempting authentication
Firmware is latest: 3.0633.09.04
Nokia Model: E70-1
CODE: 0526646
following is the sniffed exchange
220 ESMTP service ready Sat, 9 Jun 2007 11:21:42 +0200
EHLO [10.10.10.120]
250-mx2.acme.com Hello [10.10.10.120] ([x.y.z.33]), pleased to meet you
250-AUTH LOGIN
250-DSN
250-SIZE
250-8BITMIME
250 PIPELINING
RSET
250 Reset state
MAIL FROM:[email protected]
250 [email protected].. Sender OK
RCPT TO:[email protected]
554 Relay rejected for policy reasons.
QUIT
Any help is appreciated

nop, I lost my E70, and changed to an E90 Communicator.
I do not have this problem on Communicator, although I have another old annoying problem I have had with many E series Nokia phones: from time to time, the account gets messed up (i.e. it does not download mail anymore) and there is no way to recover it except deleting it and recreating from scratch. I once called Nokia support and the operator answer was: "let's try to create a new account and see if it works" That was exactly the thing I was complaining about, so I gently terminated the conversation and concluded there is no support from Nokia to end users. I have tested iPhone, and as a phone, it is still immature, but the email client is a lot better. I am really looking into next releases of iPhone to see if I can switch away from Nokia. I hope Nokia gets a wake up call from posts like these before it gets it from sales ...

MobileMe not authenticating on server accounts...

Hello all,
This is a crosspost from the MobileMe support forums, and I've been banging my head against a wall on this one. I can't seem to figure out what's going wrong here.
Summary: MobileMe accounts not syncing on any of my portable home directories or server accounts due to authentication error.
My theory is that it somehow relates to a kerberos problem, but have no way to verify...
Original thread:
https://discussions.apple.com/message/15067462#15067462
Thanks all!

After much trial and error, I was able to fix the issues.
I had to uncheck SSL, and the port switched to Port 143...now MobileMe is working with Mail, and MobileMe on my MBP...
Can anyone explain why I need to do this? And is it secure?
Thx

"530 5.7.1 Client was not authenticated" Error with mail service

Hi,
I have some problem with Mail service with the Webspaces application. I have configured the Service (with MS Exchange server) with WebSpaces Application with the required IMAP, SMTP, External Application and LDAP Settings correctly. I opened the Mail Page and Logged in with the
user credentials. I am able to see the incoming mails , But when I try to send a mail I am getting the following exception. For some reason, SMTP send is failing. I did the same IMAP and SMTP settings in MS Outlook and successfully sent the mail. what could be the problem? Please repond.
oracle.webcenter.collab.mail.MailException: Failed to send the message with subject "Test". Further information: 530 5.7.1 Client was not authenticated
     at oracle.webcenter.collab.mail.MailSession.sendMessage(MailSession.java:864)
     at oracle.webcenter.collab.mail.view.backing.MessageHandler.sendMessage(MessageHandler.java:528)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.sun.el.parser.AstValue.invoke(AstValue.java:157)
     at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283)
     at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1245)
     at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:87)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:298)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:91)
     at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:87)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:87)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:298)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:91)
     at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:81)
     at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475)
     at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:673)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:273)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:165)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.portlet.client.adapter.adf.ADFPortletFilter.doFilter(ADFPortletFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.webcenter.webcenterapp.internal.view.webapp.WebCenterShellPageRedirectionFilter.doFilter(WebCenterShellPageRedirectionFilter.java:210)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.webcenter.webcenterapp.internal.view.webapp.WebCenterShellFilter.doFilter(WebCenterShellFilter.java:603)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.view.page.editor.webapp.WebCenterComposerFilter.doFilter(WebCenterComposerFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.share.http.ServletADFFilter.doFilter(ServletADFFilter.java:65)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:85)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:54)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.wls.JpsWlsFilter$1.run(JpsWlsFilter.java:96)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.wls.util.JpsWlsUtil.runJaasMode(JpsWlsUtil.java:146)
     at oracle.security.jps.wls.JpsWlsFilter.doFilter(JpsWlsFilter.java:140)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.webcenter.webcenterapp.internal.view.webapp.WebCenterLocaleWrapperFilter.processFilters(WebCenterLocaleWrapperFilter.java:256)
     at oracle.webcenter.webcenterapp.internal.view.webapp.WebCenterLocaleWrapperFilter.doFilter(WebCenterLocaleWrapperFilter.java:215)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:202)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3588)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2200)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2106)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1428)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: com.sun.mail.smtp.SMTPSendFailedException: 530 5.7.1 Client was not authenticated
     at com.sun.mail.smtp.SMTPTransport.issueSendCommand(SMTPTransport.java:1388)
     at com.sun.mail.smtp.SMTPTransport.mailFrom(SMTPTransport.java:959)
     at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:583)
     at oracle.webcenter.collab.mail.MailSession.sendMessage(MailSession.java:850)
Edited by: indra_owc on Jan 9, 2010 6:14 PM

The server probably wants you to use the STARTTLS command before you authenticate.
See the com.sun.mail.smtp package javadocs for the property to set to enable that.

Error in sending mail : SMTPSendFailedExcept Client was not authenticated

Hello all,
I am new to the forum,
I have a small program to send mail to Microsoft exchange server.
Now the server is enabled with https option.
Now i am getting error :
com.sun.mail.smtp.SMTPSendFailedException: 530 5.7.1 Client was not authenticated
at com.sun.mail.smtp.SMTPTransport.issueSendCommand(SMTPTransport.java:1668)
at com.sun.mail.smtp.SMTPTransport.mailFrom(SMTPTransport.java:1207)
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:735)
at javax.mail.Transport.send0(Transport.java:191)
at javax.mail.Transport.send(Transport.java:120)
at SendEmail.main(SendEmail.java:55)
there are two things:
As the program sends mail from a webpage, a user password used for login to the webpage is different from his mail server password, it is not possible to give a username and password to send mail / read mail from the exchange server.
Please give any other option without passing user name and password to the exchange server.

1. Reconfigure the Exchange server to allow sending without authentication.
2. Authenticate to the Exchange server using credentials specific to the web application itself.
Configure the Exchange server to allow the user with those credentials to send mail that appears
to be from any other user.
No, I don't know how to do any of that with Exchange; ask Microsoft.

Javax.mail.MessagingException: 505 Client was not authenticated

Hi!,
I got the following error:
Exception in thread "main" javax.mail.MessagingException: 505 Client was not authenticated
at com.sun.mail.smtp.SMTPTransport.issueCommand(SMTPTransport.java:507)
at com.sun.mail.smtp.SMTPTransport.mailFrom(SMTPTransport.java:312)
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:168)
at HelloMail.main(HelloMail.java:35)
This is the code:
To send an email I need authentification, and I include the mail.smtp.auth propertie and
"message.saveChanges();
Transport transport = session.getTransport("smtp");
transport.connect("mail.xxx.com.mx","harriaga",passw);
transport.sendMessage(message,message.getAllRecipients());
transport.close();"
Do you know if I am skip something.
import java.util.Properties;
import javax.mail.*;
import javax.mail.internet.*;
public class HelloMail {
public static void main(String args[]) throws Exception {
String host="mail.xxx.com.mx"; //obviously doesn't work
String from="[email protected]"; //sender's email
String to ="[email protected]" ; //receiver's email
Properties props = System.getProperties();
props.put("mail.smtp.host", host);
props.put("mail.smtp.auth", "true");
Session session=Session.getInstance(props,null);
MimeMessage message = new MimeMessage(session);
message.setFrom(new InternetAddress(from));
message.addRecipient(Message.RecipientType.TO, new
InternetAddress(to));
message.setSubject(" My Test HTML email ");
message.setText(" Here is the content ");
message.saveChanges();
Transport transport = session.getTransport("smtp");
transport.connect("mail.xxx.com.mx","harriaga",passw);
transport.sendMessage(message,message.getAllRecipients());
transport.close();
Thanks for all,
HAG.

HAG,
you need to create a session object passing a valid authenticator. In other words,
MyAuthenticator auth = new MyAuthenticator ();
Session session = Session.getInstance(props, auth);where MyAuthenticator is something like
public class MyAuthenticator extends Authenticator{
public PasswordAuthentication getPasswordAutentication(){
return new PasswordAuthentication( "user", "password");
}You obviously need to replace username and password with data valid for your e-mail account.
Hope this helps,
gulfi

5.7.1 Client was not authenticated

hey,
I need to send mail over "daily tasks, and i get the following exception :
System.Net.Mail.SmtpException: The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.7.1 Client was not authenticated
at System.Net.Mail.MailCommand.CheckResponse(SmtpStatusCode statusCode, String response)
at System.Net.Mail.MailCommand.Send(SmtpConnection conn, Byte[] command, String from)
at System.Net.Mail.SmtpTransport.SendMail(MailAddress sender, MailAddressCollection recipients, String deliveryNotify, SmtpFailedRecipientException& exception)
at System.Net.Mail.SmtpClient.Send(MailMessage message)
I check the user to see if he not a locked, and he doesn't .
I check the smtp mail server ans he is ok.
what else can i check? how can i fix this? this is super urgent.
this is my code :
MailMessage mess = null;
Attachment attach = null;
SmtpClient smtp = null;
try
mess = new MailMessage();
smtp = new SmtpClient("smtp.office365.com");
smtp.Port = 587;
smtp.EnableSsl = true;
System.Net.NetworkCredential cred = new System.Net.NetworkCredential("[email protected]", "Pass");
smtp.Credentials = cred;
mess.From = new MailAddress("[email protected]");
mess.Subject = fileName;
smtp.Timeout = 300000;
smtp.Send(mess);
catch (SmtpFailedRecipientException exp)
Console.WriteLine(exp.FailedRecipient);
log.Error(exp);
elog.WriteEntry(exp.ToString(),EventLogEntryType.Error, 0);
catch (Exception e)
Console.WriteLine(e.ToString());
log.Error(e);
elog.WriteEntry(e.ToString(), EventLogEntryType.Error, 0);
finally
attach.Dispose();
mess.Dispose();
smtp.Dispose();

Check if the client connector used to connect with the 587 port is allowed to accept authentication on Plain Text.
Try a relay connector if you want to send the email without the authentication.
http://technet.microsoft.com/en-us/library/bb232021(v=exchg.141).aspx
Syed MM Messaging SME - IBM || MCTS || MCSE || MCSA || VCP5 || VCA ||

Email Notification - ERROR: 530 5.7.1 Client was not authenticated

Hi People!
I am receiving the follows error when I run scheduled task. Also, I used Javamail and I have the same problem. The problem: MAIL FROM isn´t authenticating. How can I solve it?
Other question: How can I configure Email Notification in debug?
Thanks!
API Code (Schedule task)
this.dataProvider = getDataBase();
tcEmailNotificationUtil emaildef = new tcEmailNotificationUtil(dataProvider);
emaildef.setSubject("User: " + s2);
emaildef.setFromAddress(fromaddr);
emaildef.setBody("OIM has detected a modify in Active Directory. " );
emaildef.sendEmail(toaddr);
System Configuration->XL.MailServer=Email Server
IT Resource 'Email server'
Name Email Server
Auth : true
Server name : exchange server name
User name : <domain name>\User name
Password :: Password of that user
ERROR
ERROR,11 Jan 2011 18:18:00,375,[XELLERATE.REQUESTS],Class/Method: tcEmailNotificationUtil/sendEmail encounter some problems: 530 5.7.1 Client was not authenticated
com.sun.mail.smtp.SMTPSendFailedException: 530 5.7.1 Client was not authenticated
at com.sun.mail.smtp.SMTPTransport.issueSendCommand(SMTPTransport.java:1388)
at com.sun.mail.smtp.SMTPTransport.mailFrom(SMTPTransport.java:959)
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:583)
at javax.mail.Transport.send0(Transport.java:169)
at javax.mail.Transport.send(Transport.java:98)
at com.thortech.xl.dataobj.util.tcEmailNotificationUtil.sendEmail(Unknown Source)
at com.thortech.xl.schedule.tasks.ActiveDirectoryReconTask.processUserChange(ActiveDirectoryReconTask.java:657)
at com.thortech.xl.schedule.tasks.ActiveDirectoryReconTask.processBatch(ActiveDirectoryReconTask.java:341)
at com.thortech.xl.integration.ActiveDirectory.tcADUtilLDAPController.searchResultPageEnum(Unknown Source)
at com.thortech.xl.schedule.tasks.ActiveDirectoryReconTask.performReconciliation(ActiveDirectoryReconTask.java:248)
at com.thortech.xl.schedule.tasks.ActiveDirectoryReconTask.execute(ActiveDirectoryReconTask.java:97)
at com.thortech.xl.scheduler.tasks.SchedulerBaseTask.run(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper$TaskExecutionAction.run(Unknown Source)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.security.Security.runAs(Security.java:41)
at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown Source)
at org.quartz.core.JobRunShell.run(JobRunShell.java:178)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:477)
--------------------------------------------------------------------------------

Thanks Justin,
for all your help and support.
there was some settings to be done in the exchange server. and today the system admin co-operated with me and did the changes in the exchange.
now the messaging is working fine.
Thanks,
Rashed

Iphone 3 and 4 can not connect to server

We have been syncing e-mail to IPhone for 2 + years, Last night we stopped getting mail on our Iphones and other smart phones.
Using Exchange 2003 server.
Rebooted twice today - not seeing any sync errors in event log
Deleted my account, hard boot of IPhone and recreated account - still getting error “ can not connect to server” in mail
What is strange it is only mail – I can move an appointment and it updates my outlook calendar
Any suggestions much appreciated!

This resolve my problems
With that error noted, a search brought me to a solution:
http://alan.lamielle.net/2009/09/03/windows-7-nonpaged-pool-srv-error-2017
Set the following registry key to ’1′:
HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\LargeSystemCache
and set the following registry key to ’3′:
HKLM\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters\Size
Explanation of what the reg keys do: http://www.decuslib.com/decus/vmslt99a/nt/tips.txt (scroll to bottom)
Thanks to Alan LaMielle and Mark Russinovich.

I get a message the message " Can not get mail. Not connected to server" Yet I am connected with Wi-fi and can access all other websites. Can you advise? My iPad is only a month old!

Has any one experienced not being able to send mail and only receiving some? I get the message " can not get mail. No connection to the server! " Yet I get some mail but can not send out any. My iPad is only 1 month old! It worked perfectly for about 10 days.
Thx
Agnes

Hey agnesfromcopenhagen k,
Thanks for the question. I understand you are experiencing issues with Mail on your iPad. The following resource provides some troubleshooting steps. What kind of account are you using? Some internet providers require that you be connected to your home Wi-Fi (or for work accounts, inside your corporate Wi-Fi/firewall). Also, some email accounts require two-step authentication. For more information, see this resource:
iOS: Troubleshooting Mail
http://support.apple.com/kb/TS3899
Thanks,
Matt M.

Error in receiver Mail adapter: Client was not authenticated

Hi.
My requirement is to send email via PI to an extermal mail address. I am trying to use the following configuation for the same.
Tramsport Protocol: SMTP
Message Protocol: XIPAYLOAD
URL: To get the value of URL, execute transaction SCOT in PI system. Double click on SMTP and get the Mail host from there (name). So the URL has been specified as smtp://name
Comfigure User authentication - Checked
User: My outlook email address
Password: My outlook email password
From: My outlook email address
To: External address to which the email needs to be sent
Content encoding: base64
But the email is not getting sent. when I check the adapter engine I see the errors:
Mail: error occured: java.io.IOException: server not responding OK to MAIL FROM; 530 5.7.1 Client was not authenticated
Mail: error occured: com.sap.aii.af.lib.mp.module.ModuleException
MP: exception caught with cause com.sap.aii.af.sdk.xi.srt.BubbleException: Failed to call the endpoint [null "null"]; nested exception caused by: java.io.IOException: server not responding OK to MAIL FROM; 530 5.7.1 Client was not authenticated
Adapter Framework caught exception: Failed to call the endpoint
Delivering the message to the application using connection Mail_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.af.sdk.xi.srt.BubbleException: Failed to call the endpoint [null "null"]; nested exception caused by: java.io.IOException: server not responding OK to MAIL FROM; 530 5.7.1 Client was not authenticated.
Can anyone please suggest what changes are needed to make this work?
Any help is greatly appreciated.
Thanks.
Anuradha.

HI Anuradha,
Check the below link for receiver mail configuration and follow the steps accordingly.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0a27c01-26b0-2c10-bd8a-94498efa7ff6?quicklink=index&overridelayout=true
Regards,
Naveen

The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1 Authentication Required.

try
MailMessage mail = new MailMessage();
SmtpClient SmtpServer = new SmtpClient("smtp.gmail.com");
mail.From = new MailAddress("[email protected]");
mail.To.Add("[email protected]");
mail.Subject = "Test Mail..!!!!";
mail.Body = "mail with attachment";
System.Net.Mail.Attachment attachment;
attachment = new System.Net.Mail.Attachment(@"C:\Attachment.txt");
mail.Attachments.Add(attachment);
SmtpServer.Port = 587;
SmtpServer.UseDefaultCredentials = true;
SmtpServer.Credentials = new System.Net.NetworkCredential("userid", "Password");
SmtpServer.EnableSsl = true;
SmtpServer.Send(mail);
Catch(Exception exception)
When i m run this part of code it throw an Ecxeption
Given Below is the Error..
The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1 Authentication Required.
Bikky Kumar

try
MailMessage mail = new MailMessage();
SmtpClient SmtpServer = new SmtpClient("smtp.gmail.com");
mail.From = new MailAddress("[email protected]");
mail.To.Add("[email protected]");
mail.Subject = "Test Mail..!!!!";
mail.Body = "mail with attachment";
System.Net.Mail.Attachment attachment;
attachment = new System.Net.Mail.Attachment(@"C:\Attachment.txt");
mail.Attachments.Add(attachment);
SmtpServer.Port = 587;
SmtpServer.UseDefaultCredentials = true; ///Set it to false, or remove this line
SmtpServer.Credentials = new System.Net.NetworkCredential("userid", "Password");
SmtpServer.EnableSsl = true;
SmtpServer.Send(mail);
Catch(Exception exception)
Given Below is the Error.. The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1 Authentication Required.
Solution:
The error might occur due to following cases.
case 1: when the password is wrong
case 2: when you try to login from some App
case 3: when you try to login from the domain other than your time zone/domain/computer (This
is the case in most of scenarios when sending mail from code)
There is a solution for each
solution for case 1: Enter the correct password.
Recomended: solution for case 2: go to
security settings at the following link https://www.google.com/settings/security/lesssecureapps and
enable less secure apps . So that you will be able to login from all apps.
solution 1 for case 3: (This might be helpful) you need to review the activity. but reviewing the activity will not be helpful due to latest security
standards the link will not be useful. So try the below case.
solution 2 for case 3: If you have hosted your code somewhere on production server and if you have access to the production server, than take remote
desktop connection to the production server and try to login once from the browser of the production server. This will add exception for login to google and you will be allowed to login from code.
But what if you don't have access to the production server. try
the solution 3
solution 3 for case 3: You have to enable
login from other timezone / ip for your google account.
to do this follow the link https://g.co/allowaccess and
allow access by clicking the continue button.
And that's it. Here you go. Now you will be able to login from any of the computer and by any means of app to your google account.
Regards,
Nabeel Arif

[nQSError:75006] Unable to send MAIL Command.5.7.1 Client was not authentic

Hi,
We have configured SMTP server details in OBIEE 11g OEM to send mail from Agent. When we run Agents, we are getting the error
[nQSError:75006] Unable to send MAIL Command.5.7.1 Client was not authenticated
Did anyone face the issue? In that Case, Please give some inputs on that.

Hi Satya,
I would like to few more which I have done today.
I wanted to test telnet SMTP on the OBIEE Installed Machine and I was able to succeed also. Please find below what I did
C:\>telnet mail.smtp.com 25
220 internal.mail.smtp.com Microsoft ESMTP MAIL Service Readt at Fri,
25 May 2012 00:51:00 -0400
ehlo
250-internal.mail.smtp.com Hello [162.44.76.47]
250-SIZE
250-PIPELINING
250-DSN
250-ENHANCEDSTATUSCODES
250-X-ANONYMOUSTLS
250-AUTH NTLM LOGIN
250-X-EXPS GSSAPI NILM
250-8BITMIME
250-BINARYMIME
250-CHUNKING
250-XEXCH50
250 XRDST
AUTH LOGIN
334 VXN1cm5hbWU6
Uy5SY-------------- Mail User Name
334 UGFzc3dvcmWU6
U2hfpd------------- Mail Password
235 2.7.0 Authentication Successful
mail from:[email protected]
250 2.1.0 Sender OK
rcpt to:[email protected]
250 2.1.5 Recipient OK
data
354 start mail input; end with <CRLF>.<CRLF>
This is a Test Mail
250 2.6.0 <internal.mail.smtp.com>
Queue Mail for Delivery
Mail Received in Inbox
So, My Question is that, I am able to receive the Mail if I directly access SMTP via Telnet then , Why it is not working in OBIEE and it throws error
[nQSError:75006] Failed to send MAIL Command.5.7.1 Client was not authenticated
Please help on resolving the issue?

IMAP option to not delete from server OR recommend alternate mail app?

Using POP in Windows computer and IMAP on iphone.
In the iphone, POP has the opton to "delete from server: never"
There seems no way to accomplish this in the stock mail app when using IMAP ?
Using POP on the iphone is not an option due to the longstanding issue of the Apple mail apps not sending a proper termination signal back. The mailbox remains locked until the server times it out for inactivity and cleans up the stale lock after 10 minutes. The result is "wrong password" on the computer if it then tries to retrieve during that period. It's a feature of POP by design to use a lock to prevent corruption caused by simultaneous access to the mailbox. BUT, BB,Android,Windows all handle this correctly so that their POP transaction (and the mailbox lock) only lasts seconds! Only ever see this persistent lock with Apple mail clients
The user likes to keep his phone inbox clean, he will delete messages as he deals with them as well as messages he is postponing to deal with on computer later.
Moving messages to a 'later' folder won't help, as that 'later' folder will not be available thru POP (for the computer)
They also don't want to use IMAP on the computer because they don't want their communications stored on the server any longer than necessary.
Can anyone recommend:
- Windows IMAP client which downloads all and keeps a local copy of inbox which does not synch with server inbox.
- Alternate mail app for iphone which allows "delete from device only // never delete from server "

That's not how IMAP works. If you want to keep the inbox clean, but not delete the messages, create folders and move the messages into them for later review.

Want to delete mails from Thunderbird but not from the server?

Hi,
Please tell me how to configure the settings of Thunderbird so that if i delete any mail from Thunderbird that mail would be delete only from Thunderbird not from server. I'm using IMAP configuration for all my mail accounts and I'm using Thunderbird in my laptop and tablet both.
Currently i'm using Thunderbird 24.4.0 and i just want to delete my useless mails from Thunderbird but not from the server without using pop-3 settings.
Actually the reason for this Question arises because whenever i use to uninstall and reinstatement Thunderbird, i use to take "profiles" as a back up and its size is increasing day by day that is making a big issue to me as i cant take a back up of such a big size file.

Imap mail accounts keep the emails on the server and you see a remote view of those emails and folders.
When you subscribe to see a folder, the headers are downloaded, when you select an email to read, the entire folder is downloaded to a temp cache facilitating quicker access. If you synchronize folders, then a copy of that folder is downloaded to an mbox file in your profile, so that you have a copy of the server folder. When you make any changes to a synchronized folder, read an email, delete or move etc, then Thunderbird will resynchronize with the server to update the server. A synchronized folder allows you to work in 'offline' mode and this is the best time to perform a backup as you know there is a temporary stop on synchronizing as you are offline. They will resynchronize when you go back into 'online' mode.
So, with IMAP mail accounts, the folders you see in Thunderbird are the same folders on the webmail server. If you make any changes via Thunderbird or webmail then you are changing the same folder. You cannot delete an email without deleting it from the server, they are one and the same.
What you can do is move/copy an email into Local Folders and delete the one on the server. The Local Folders emails are kept in your Profile on your computer, these folders/emails are not on the server, unless you chose to keep a copy of them on the server.
Pop mail accounts cannot see the folders on the server. They only access the server Inbox folder and download emails not previously downloaded to the mail account Inbox in Thunderbird. These emails are kept on your computer in your profile folder. You can select to keep a copy on the server or not. You can choose to delete emails off your computer and off the server or not.
If the mail account is gmail , have you subscribed or even synchronized to see the 'All Mail' folder ? Gmail's all Mail folder is their Archive folder, it keeps a copy of all of your non-deleted emails. So, you do not need to subscribe to see this folder as it only shows you what you can already see in other folders. It doubles the disc space.
Please read section on 'All Mail' at this link.
* http://kb.mozillazine.org/Using_Gmail_with_Thunderbird_and_Mozilla_Suite
You do not have to download/synchronize the entire folder. You could select to only synchronize the most recent xx days of emails.
see info here:
* https://support.mozilla.org/en-US/kb/imap-synchronization#w_configuring-synchronization-and-disk-space-usage

E70 is not authenticating to server ... so mail is...

Similar Messages

Maybe you are looking for