E70 Update ends in Test mode?

I am trying to update my E70. The updater installed fine. It runs fine. It recognizes my phone. Downloads the firmware. Then it starts updating the phone.
After a while nsl_host_process.exe quits. On one computer I have Dr. Watson. On another one it silently quits. Still the updater gui shows the same "Updating software, please wait...". The phone itself shows:
APE_TEST_SERVER,w43_05,(c)NMP
Test
mode
Nokia
Nokia
And that's it. The phone does not react to any keys. Nothing else is happening anymore. I have read the update can take up to 20 minutes but I have been patiently waiting for 1 hour now.
What should I do now? Can I simply unplug the phone? Or can I expect the updater to figure out eventually that somethings gone wrong?

18-Dec-200604:27 PM
zayebysty_mis wrote:
the same is with E61, test mode and nothig.
Today was relesed new NSU(1.2.20) with (i think, because i dont have this error) nsl_host_process.exe error fixed, but upgrade still ends on test mode...
I faced the same problem while updating my nokia 6300!!!!
my phone screen now reads "test mode" and it shows no reaction to any key strokes. It seems I have no choice but to remove the battery. I don't know what to do????!!!!!!

Similar Messages

Client copy error in test mode

Dear all,
I am doing a client copy in test mode. Following log is generated. Please tell me solution for it.
    Log File:
devdemo\sapmnt\trans\log\CC000007.RBD
Client copy from 25.08.2008 15:43:29
System ID............................ RBD
Target client........................ 120
R/3 Release.......................... 700
Basis Support Package...............SAPKB70012
Host................................. devdemo
Start in background............. .....
User................................. SAP*
Parameter
Source destination......................PRD_300
Source system.........................PRD
Client in source system..............300
Users in source system..............RBASIS
Basis Support Package...............SAPKB70012
Copier profile:.......................SAP_ALL
Table selection
Customizing data .....................X
With application data................ X
Initialize and recreate......... X
         / |   Change documents are not copied                                                                                |
Test mode (without database update).. X
    3S3T |   Start analysis of system 15:43:29                                                                                |
/GC1/CC_EXIT_CLIENT_DELETION executed         0(        0) entries copied
Exit program /GC1/CC_EXIT_CLIENT_DELETION successfully executed 15:43:44
Table /SAPCND/CONDINDX is deleted, not copied
Table /SAPCND/CONDREF is deleted, not copied
Table /SAPCND/CONDRECS is deleted, not copied
/SAPCND/CC_EXCLUDE_TABLES executed         3(        0) entries copied
Exit program /SAPCND/CC_EXCLUDE_TABLES successfully executed 15:43:44
Unknown message with
/SAPCND/CC_GROUP_WS_AA executed         0(        0) entries copied
Runtime              0 seconds
Exit program /SAPCND/CC_GROUP_WS_AA successfully executed 15:43:45
ADDR_CLIENTCOPY_SELECT_TABLES executed        26(        0) entries copied
Runtime              1 seconds
Exit program ADDR_CLIENTCOPY_SELECT_TABLES successfully executed 15:43:47
EFG_FORM_CC_EXIT_BEFORE executed         0(        0) entries copied
Runtime              0 seconds
Exit program EFG_FORM_CC_EXIT_BEFORE successfully executed 15:43:48
Start of deletion methods for client 120
Start the deletion method for object FINB-TR-DERIVATION
End of deletion method of object FINB-TR-DERIVATION
Start the deletion method for object UCM003
End of deletion method of object UCM003
Start the deletion method for object /EACC/ARCHIVING
End of deletion method of object /EACC/ARCHIVING
Start the deletion method for object /EACC/JOURNALCC
End of deletion method of object /EACC/JOURNALCC
Start the deletion method for object /EACC/DERIVATION-1
End of deletion method of object /EACC/DERIVATION-1
Start the deletion method for object FINB-PERSIST
End of deletion method of object FINB-PERSIST
Start the deletion method for object FINB_GENERATOR
Deletion log for client 120, application 10
0 objects registered for deletion
No errors found in simulation mode
Deletion log for client 120, application EA
0 objects registered for deletion
No errors found in simulation mode
Deletion log for client 120, application UG
0 objects registered for deletion
No errors found in simulation mode
End of deletion method of object FINB_GENERATOR
Start the deletion method for object FINB_SBU_DUMMY
Buffer FINB_S_SBU_BUFFER_HASH_KEY, area AS deleted on server devdemo
Buffer FINB_S_SBU_BUFFER_HASH_KEY, area AS deleted on server devdemo_RBD_00
Buffer FINB_S_SBU_BUFFER_HASH_KEY, area XP deleted on server devdemo
Buffer FINB_S_SBU_BUFFER_HASH_KEY, area XP deleted on server devdemo_RBD_00
Buffer FINB_S_KF_CHARS_BUFFER_KEY, area HA deleted on server devdemo
Buffer FINB_S_KF_CHARS_BUFFER_KEY, area HA deleted on server devdemo_RBD_00
Buffer FINB_S_SBU_BUFFER_HASH_KEY, area GN deleted on server devdemo
Buffer FINB_S_SBU_BUFFER_HASH_KEY, area GN deleted on server devdemo_RBD_00
End of deletion method of object FINB_SBU_DUMMY
FINB_TR_CC_EXIT executed         0(        0) entries copied
Runtime              1 seconds
Exit program FINB_TR_CC_EXIT successfully executed 15:43:50
TPM_TRG_CCEXIT_REMOTE executed         0(        0) entries copied
Runtime              0 seconds
Exit program TPM_TRG_CCEXIT_REMOTE successfully executed 15:43:56
CLIENTCOPY_SELECT_TEXTTAB executed         3(        0) entries copied
Runtime              0 seconds
Exit program CLIENTCOPY_SELECT_TEXTTAB successfully executed 15:43:56
Table KX9RABA0000108 is deleted, not copied
Table TABADRH is deleted, not copied
Table TABADRS is deleted, not copied
Table TABADRSF is deleted, not copied
Table TABADRST is deleted, not copied
Table UCF001C is deleted, not copied
Table UCF001G is deleted, not copied
Table UCF001T is deleted, not copied
Table UCF0020 is deleted, not copied
Table UCF0021 is deleted, not copied
Table UCF0022 is deleted, not copied
Table UCF0023 is deleted, not copied
Table UCF002C is deleted, not copied
Table UCF002T is deleted, not copied
Table UCF0032 is deleted, not copied
Table UCF003C is deleted, not copied
Table UCF003G is deleted, not copied
Table UCF003T is deleted, not copied
Table UCF0040 is deleted, not copied
Table UCF0041 is deleted, not copied
Table UCF0042 is deleted, not copied
Table UCF0043 is deleted, not copied
Table UCF004C is deleted, not copied
Table UCF004T is deleted, not copied
Table UCF1000 is deleted, not copied
Table UCF1001 is deleted, not copied
Table UCF1002 is deleted, not copied
Table UCF2300 is deleted, not copied
Table UCF2301 is deleted, not copied
Table UCF2310 is deleted, not copied
Table UCF2311 is deleted, not copied
Table UCF3000 is deleted, not copied
Table UCF3001 is deleted, not copied
Table UCF3010 is deleted, not copied
Table UCF4000 is deleted, not copied
Table UCF4001 is deleted, not copied
Table UCF4002 is deleted, not copied
Table UCF5000 is deleted, not copied
Table UCF5001 is deleted, not copied
Table UCF5002 is deleted, not copied
Table UCF5010 is deleted, not copied
Table UCF600C is deleted, not copied
Table UCF6010 is deleted, not copied
Table UCF6020 is deleted, not copied
Table UCF6030 is deleted, not copied
Table UCF6050 is deleted, not copied
Table UCF6100 is deleted, not copied
Table UCF6110 is deleted, not copied
Table UCF6120 is deleted, not copied
Table UCF6130 is deleted, not copied
Table UCF6140 is deleted, not copied
Table UCF6150 is deleted, not copied
Table UCF6160 is deleted, not copied
Table UCF6170 is deleted, not copied
Table UCF6180 is deleted, not copied
Table UCF6200 is deleted, not copied
Table UCF620C is deleted, not copied
Table UCF620T is deleted, not copied
Table UCF6210 is deleted, not copied
Table UCF6300 is deleted, not copied
Table UCF6310 is deleted, not copied
Table UCF7100 is deleted, not copied
Table UCF7101 is deleted, not copied
Table UCF7102 is deleted, not copied
Table UCF7110 is deleted, not copied
Table UCF7300 is deleted, not copied
Table UCF7400 is deleted, not copied
Table UCF7410 is deleted, not copied
Table UCF7500 is deleted, not copied
Table UCF900C is deleted, not copied
Table UCF9010 is deleted, not copied
Table UCFE01T is deleted, not copied
Table UCFE020 is deleted, not copied
Table UCFE02T is deleted, not copied
Table UCFE03G is deleted, not copied
Table UCFE03T is deleted, not copied
Table UCFE04G is deleted, not copied
Table UCFE04T is deleted, not copied
Table UCFE050 is deleted, not copied
Table UCFE05G is deleted, not copied
Table UCFE05T is deleted, not copied
Table UCFE060 is deleted, not copied
Table UCFE06G is deleted, not copied
Table UCFE06T is deleted, not copied
Table UCFE070 is deleted, not copied
Table UCFE080 is deleted, not copied
Table UCFE081 is deleted, not copied
Table UCFI00C is deleted, not copied
Table UCFI10T is deleted, not copied
Table UCFI200 is deleted, not copied
Table UCFI210 is deleted, not copied
Table UCFT000 is deleted, not copied
Table UCFT001 is deleted, not copied
Table UCFT002 is deleted, not copied
Table UCFV000 is deleted, not copied
Table UCFV200 is deleted, not copied
Table UCFV201 is deleted, not copied
Table UCFV202 is deleted, not copied
Table UCFV20G is deleted, not copied
Table UCFV21G is deleted, not copied
Table UCFV21T is deleted, not copied
Table UCFV220 is deleted, not copied
Table UCFV22T is deleted, not copied
Table UCI1101 is deleted, not copied
Table UCI1201 is deleted, not copied
Table UCI2100 is deleted, not copied
Table UCL2011 is deleted, not copied
Table UCL201G is deleted, not copied
Table UCL201T is deleted, not copied
Table UCM0010 is deleted, not copied
Table UCM0011 is deleted, not copied
Table UCM0012 is deleted, not copied
Table UCM0013 is deleted, not copied
Table UCM0014 is deleted, not copied
Table UCM0015 is deleted, not copied
Table UCM0016 is deleted, not copied
Table UCM001T is deleted, not copied
Table UCM002C is deleted, not copied
Table UCM002T is deleted, not copied
Table UCM0030 is deleted, not copied
Table UCM0031 is deleted, not copied
Table UCM0032 is deleted, not copied
Table UCM0033 is deleted, not copied
Table UCM003C is deleted, not copied
Table UCM003T is deleted, not copied
Table UCM1000 is deleted, not copied
Table UCM1001 is deleted, not copied
Table UCM100G is deleted, not copied
Table UCM100T is deleted, not copied
Table UCM600C is deleted, not copied
Table UCM600T is deleted, not copied
Table UCMA100 is deleted, not copied
Table UCMA101 is deleted, not copied
Table UCMA10C is deleted, not copied
Table UCMA10T is deleted, not copied
Table UCMI100 is deleted, not copied
Table UCMI10C is deleted, not copied
Table UCMI10T is deleted, not copied
Table UCMI200 is deleted, not copied
Table UCMI210 is deleted, not copied
Table UCMI220 is deleted, not copied
Table UCMT010 is deleted, not copied
Table UCMT01C is deleted, not copied
Table UCMT01T is deleted, not copied
Table UCMT100 is deleted, not copied
Table UCMT10C is deleted, not copied
Table UCMT10T is deleted, not copied
Table UCMV01T is deleted, not copied
Table UCRX01C is deleted, not copied
Table UCRX02G is deleted, not copied
Table UCS0100 is deleted, not copied
Table UCS0102 is deleted, not copied
Table UCS0103 is deleted, not copied
Table UCS0104 is deleted, not copied
Table UCS0105 is deleted, not copied
Table UCS0106 is deleted, not copied
Table UCS0107 is deleted, not copied
Table UCS0108 is deleted, not copied
Table UCS010T is deleted, not copied
Table UCS0110 is deleted, not copied
Table UCS01A0 is deleted, not copied
Table UCS01A1 is deleted, not copied
Table UCS01A2 is deleted, not copied
Table UCS01A3 is deleted, not copied
Table UCS020T is deleted, not copied
Table UCT100G is deleted, not copied
Table UCT100T is deleted, not copied
Table UCT101C is deleted, not copied
Table UCT101T is deleted, not copied
Table UCT2001 is deleted, not copied
Table UCT200G is deleted, not copied
Table UCT200T is deleted, not copied
Table UCT2010 is deleted, not copied
Table UCT2011 is deleted, not copied
Table UCT2012 is deleted, not copied
Table UCT2013 is deleted, not copied
Table UCT2014 is deleted, not copied
Table UCT2015 is deleted, not copied
Table UCT2016 is deleted, not copied
Table UCT3000 is deleted, not copied
Table UCT300G is deleted, not copied
Table UCT4000 is deleted, not copied
Table UCT400G is deleted, not copied
Table UCT8000 is deleted, not copied
Table UCT800G is deleted, not copied
Table UCT8010 is deleted, not copied
Table UCT8011 is deleted, not copied
Table UCT8012 is deleted, not copied
Table UCT8013 is deleted, not copied
Table UCT8014 is deleted, not copied
Table UCT8015 is deleted, not copied
Table UCT8016 is deleted, not copied
Table UCT801G is deleted, not copied
Table UCT801T is deleted, not copied
Table /ISDFPS/CS_EXLST is convertible to the RFC system, field missing locally
Table /ISDFPS/CS_EXLST is deleted, not copied
Table AD01DLI is convertible to the RFC system, field missing locally
Table AD01DLI is deleted, not copied
Table ADRC is convertible to the RFC system, field missing locally
Table ADRC is deleted, not copied
Table AFFW is convertible to the RFC system, field missing locally
Table AFFW is deleted, not copied
Table AFIH is convertible to the RFC system, field missing locally
Table AFIH is deleted, not copied
Table AFKO is convertible to the RFC system, field missing locally
Table AFKO is deleted, not copied
Table AFPO is convertible to the RFC system, field missing locally
Table AFPO is deleted, not copied
Table AFRU is convertible to the RFC system, field missing locally
Table AFRU is deleted, not copied
Table AFRV is convertible to the RFC system, field missing locally
Table AFRV is deleted, not copied
Table AFVC is convertible to the RFC system, field missing locally
Table AFVC is deleted, not copied
Table ASMD is convertible to the RFC system, field missing locally
Table ASMD is deleted, not copied
Table AUFK is convertible to the RFC system, field missing locally
Table AUFK is deleted, not copied
Table AUFM is convertible to the RFC system, field missing locally
Table AUFM is deleted, not copied
Table CEZP is convertible to the RFC system, field missing locally
Table CEZP is deleted, not copied
Table CHVW is convertible to the RFC system, field missing locally
Table CHVW is deleted, not copied
Table CHVW_INC is convertible to the RFC system, field missing locally
Table CHVW_INC is deleted, not copied
Table CKIS is convertible to the RFC system, field missing locally
Table CKIS is deleted, not copied
Table CPZP is convertible to the RFC system, field missing locally
Table CPZP is deleted, not copied
Table CRFH is convertible to the RFC system, field missing locally
Table CRFH is deleted, not copied
Table EBAN is convertible to the RFC system, field missing locally
Table EBAN is deleted, not copied
Table EKBE is convertible to the RFC system, field missing locally
Table EKBE is deleted, not copied
Table EKBEH is convertible to the RFC system, field missing locally
Table EKBEH is deleted, not copied
Table EKEK is convertible to the RFC system, field missing locally
Table EKEK is deleted, not copied
Table EKES is convertible to the RFC system, field missing locally
Table EKES is deleted, not copied
Table EKET is convertible to the RFC system, field missing locally
Table EKET is deleted, not copied
Table EKKO is convertible to the RFC system, field missing locally
Table EKKO is deleted, not copied
Table EKPO is convertible to the RFC system, field missing locally
Table EKPO is deleted, not copied
Table EKRS is convertible to the RFC system, field missing locally
Table EKRS is deleted, not copied
Table EQBS is convertible to the RFC system, field missing locally
Table EQBS is deleted, not copied
Table EQUI is convertible to the RFC system, field missing locally
Table EQUI is deleted, not copied
Table EQUZ is convertible to the RFC system, field m

Well.. those don't look like errors to me... depending on what copy profile you use SAP chooses what tables to copy and what tables to delete... so basically is just letting you know which tables are not to be copied across...
Read
http://help.sap.com/saphelp_nw04s/helpdata/en/99/0a2a8e7e2511d2a6250000e82deaaa/content.htm
Regards
Juan

Run BAPI_MATERIAL_SAVEDATA in Test Mode

Hi ABAPers,
I am trying to run BAPI_MATERIAL_SAVEDATA. When I run, the details are being changed without using 'COMMIT WORK'.
However, if I use ROLLBACK WORK before the end of the program, the database table does not get updated.
Is there any other way I can run BAPI_MATERIAL_SAVEDATA in test mode without updating the Database table?
Help is highly appreciated.
Thanks!

Do not call bapi commit function module in test moode, instead call bapi rollback FM, after u call the material save data bapi
*(or) *
I understand that you are using the BAPI, but if you were to use LSMW direct input program instead, you would be able to run in TST mode, and make sure that all of the errors are taken care of before you actually update the system.
*******************Reward points,if found useful

Macbook dies after 2008-005 security update: even hardware test not working

My Macbook no longer boots after installing security update 2008-005. Behaves as if HD is dead, AND as if boots from SuperDrive are broken too.
Sequence of events:
1. 10.5.4, Software Update notifies me of update.
2. I permit it. Immediately requires a reboot.
3. Go away for several hours.
4. Upon return, I notice the Leopard outer-space background.
5. Spinning beachball when I move the mouse.
6. Go away for several minutes.
7. Return. No change. Power down computer.
OK ... by now, you may be saying that it might still have been updating and I shouldn't have interrupted it.
But since then, the machine behaves not only like the disk is dead, but I can't even get a hardware test to run from DVD.
So, to continue.
8. Start machine again. Apple boot sound. Nothing on screen.
9. After a while, flashing "folder" icon with question mark.
Since then I've attempted to boot in safe mode, verbose mode, FireWire target disk mode (against a 10.4.x box), boot from original install disk, boot into hardware test mode from original install disk. None of these things worked. I've reset the PRAM.
The only diagnostic activity of all of these that has produced any different feedback is the PRAM reset (which sounded the Apple boot sound a second time). Everything else does not work. If the HD was dead, I could understand that none of the attempts to boot into FireWire target disk mode, or to boot from DVD and then expect to see the HD mount in some way, would work. But since it doesn't even boot the hardware test from the DVD, I'm really baffled. Any ideas? Thanks.

Well, my solution was to buy DiskWarrior and copy what I could (which was a lot, thankfully) to a FireWire external disk, then reinstall. DiskWarrior reports S.M.A.R.T. status OK, so I've gone with a fresh partition in Disk Utility and successfully installed 10.4 from the original DVDs.
Have also run Apple Hardware Test and had no problems, so I've decided to trust the drive in the short term.
Unfortunately, now, 10.5 upgrade disks won't finish and guess what ... a partial install of 10.5 breaks the 10.4! So, the machine has a recognizable startup disk but justs sits in a loop rebooting itself, presumably as it hits some inter-10.4/10.5 state and gives up.
Next up I tried to restore my 10.5 from a wired ethernet connection to my Time Capsule. Having never once been able to browse my backups in Time Machine under 10.5, I was somewhat surprised to find that the 10.5 Installer was happy to let me try a restore from the Time Capsule. It crunched away until it was happy that I had enough space on my new partition, and then did what seemed a pretty instantaneous restore. The Macbook reboots and ... can't see the startup disk.
Maybe my disk really is on the way out.

Why my AE, PR, etc are in test mode how can i get it in install mode

why my AE, PR, etc are in test mode how can i get it in install mode

Serge, I have the same issue, after updating the Creative Cloud Desktop application last week, suddenly some apps are in TEST mode instead INSTALL... (adobe Premiere, After Effects).

AFAB program strange performance in TEST mode

Hi colleagues,
We are experiencing a strange performance in AFAB program.
We have uploaded several assets in a particular company code. When executing AFAB transaction in TEST mode, the new assets are not considered, whereas, when performing a REAL execution yes they are.
We think that when reconciliating assets at the end of the year, this issue which is not harmful (but strange indeed) may be solved, but we are not sure at all.
Can anybody provide a clue on what is happening.
Thanks and my best regards

Hi When you run this report online in test it will only show +/- the first 1.000 assets and the new asset are later in the data base and you don't see them.
You have to run it in test mode in back ground and look in the spool to the result (default the spool shows arround 20 page's but this you can change or go to the next 20 pages)

Run in test mode call transaction

I have written a bdc program using call transaction method. I am giving the option in the
selection screen like run in test mode.so i want to display the error mess
without actually updating the tables,
if there is a way to do this
please tell me how to run in test mode.
thank you so much for all the replies.

have written a bdc program using call transaction method. I am giving the option in the
selection screen like run in test mode.so i want to display the error mess
without actually updating the tables,
if there is a way to do this
please tell me how to run in test mode.
thank you so much for all the replies.
Hi
it is not possible, once u run call tranation the data is updated in table.
for ur requirement, put the option in test mode in selection screen, in this mode flat file data check with master data (flat file validations
) , if any errors it disaly errors in a report.
i provide some code, this is for fb60 check this code
      FORM validate                                                 *
FORM validate.
delete t_record index 1.
loop at t_record.
    delete t_record where accnt = ' '.
    translate t_record-bukrs to upper case.
    translate t_record-accnt to upper case.
    translate t_record-waers to upper case.
    translate t_record-xblnr to upper case.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
         EXPORTING
              INPUT = t_record-accnt
         IMPORTING
              OUTPUT = t_record-accnt.
    move-corresponding t_record to n_record.
    append n_record.
    clear n_record.
endloop.
loop at t_record.
    clear flag.
    delete t_record where accnt = ' '.
vendor and company code checking.
    translate t_record-accnt to upper case.
    translate t_record-bukrs to upper case.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
         EXPORTING
              INPUT = t_record-accnt
         IMPORTING
              OUTPUT = t_record-accnt.
    select single * from lfb1 where bukrs = t_record-bukrs
                                  and lifnr = t_record-accnt.
    if sy-subrc <> 0.
      flag = 'X'.
      error_record-rowno = sy-tabix + 1.
      move-corresponding t_record to error_record.
      error_record-text1 = 'The Vendor not Under this company Code'.
    endif.
With holding liability.
    select single * from lfbw where bukrs = t_record-bukrs
                                    and lifnr = t_record-accnt
                                  and WT_SUBJCT = 'X'.
    if sy-subrc <> 0.
      flag = 'X'.
      error_record-rowno = sy-tabix + 1.
      move-corresponding t_record to error_record.
error_record-text2 = 'The Vendor doesnt have Withholding Tax Liability'.
    endif.
G/L account check with company code*
    select single * from skb1 where bukrs = t_record-bukrs
                                  and saknr = t_record-hkont.
    if sy-subrc <> 0.
      flag = 'X'.
      error_record-rowno = sy-tabix + 1.
      move-corresponding t_record to error_record.
    error_record-text3 = 'The G/L acc not under the given company code'.
    endif.
*cost centre checking
this FM for leading zeros
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
         EXPORTING
              INPUT = t_record-kostl
         IMPORTING
              OUTPUT = v_kostl.
select single kostl from csks into v_kostl where bukrs = t_record-bukrs
                                         and kostl = v_kostl.
    if sy-subrc <> 0.
      flag = 'X'.
      error_record-rowno = sy-tabix + 1.
      move-corresponding t_record to error_record.
error_record-text4 = 'The costcentre not under the given company code'.
    endif.
it check the invioce alredy posted or not.
    translate t_record-waers to upper case.
    translate t_record-xblnr to upper case.
select single belnr into v_belnr1 from bsip where bukrs = t_record-bukrs
                                          and   lifnr = t_record-accnt
                                          and   waers = t_record-waers
                                              and   bldat = p_invdat
                                          and   xblnr = t_record-xblnr.
    if sy-subrc = 0.
      day   = p_invdat+6(2).
      month = p_invdat+4(2).
      year = p_invdat+0(4).
      concatenate day month year into date1 SEPARATED BY '.'.
      error_record-rowno = sy-tabix + 1.
      move-corresponding t_record to error_record.
concatenate 'This document under number' v_belnr1 'already posted on '
      date1 into fld2 separated by space.
      error_record-text5 = fld2.
      flag = 'X'.
    endif.
*zero balance
    on change of t_record-accnt or t_record-xblnr.
      amount = 0.
      totalamount = 0.
      amount = t_record-wrbtr1.
      loop at n_record where bukrs = t_record-bukrs
                           and accnt = t_record-accnt
                           and xblnr = t_record-xblnr
                           and wrbtr1 = t_record-wrbtr1
                           and waers = t_record-waers.
        totalamount = totalamount + n_record-wrbtr2.
      endloop.
    endon.
    if amount ne totalamount.
      error_record-rowno = sy-tabix + 1.
      move-corresponding t_record to error_record.
      error_record-text6 = 'Posting only possible with zero balance'.
      flag = 'X'.
    endif.
    if flag = 'X'.
      error_record-flag = 'X'.
      append error_record.
    endif.
    if flag <> 'X'.
      move-corresponding t_record to f_record.
      append f_record.
    endif.
    clear f_record.
    clear error_record.
endloop.
endform.
*& Form Table Control
FORM head_item .
clear t_record.
LOOP AT t_record.
    delete t_record where accnt = ' '.
    translate t_record-bukrs to upper case.
    translate t_record-accnt to upper case.
    translate t_record-waers to upper case.
    translate t_record-xblnr to upper case.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
         EXPORTING
              INPUT = t_record-accnt
         IMPORTING
              OUTPUT = t_record-accnt.
    on change of t_record-accnt or t_record-xblnr or t_record-wrbtr1.
      MOVE-CORRESPONDING t_record TO t_head.
      APPEND t_head.
    endon.
    MOVE-CORRESPONDING t_record TO t_item.
    APPEND t_item.
    clear : t_item,t_head.
ENDLOOP.
ENDFORM.
form disperrortestrun.
loop at error_record.
    format color 2 intensified on.
    set left scroll-boundary column 70.
    write :   /'|',
             (6) error_record-rowno,         '|' no-gap,
             (14) error_record-bukrs,        '|' no-gap,
             (12) error_record-accnt,        '|' no-gap,
             (16) error_record-xblnr,        '|' no-gap,
             (16) error_record-wrbtr1,       '|' no-gap,
             (8) error_record-waers,        '|' no-gap,
             (13) error_record-secco,        '|' no-gap,
             (20) error_record-sgtxt,        '|' no-gap,
             (14) error_record-hkont,        '|' no-gap,
             (15) error_record-wrbtr2,       '|' no-gap,
             (10) error_record-mwskz,        '|' no-gap,
             (20) error_record-gsber,        '|' no-gap,
             (12) error_record-kostl,        '|' no-gap,
             (5) error_record-flag,         '|' no-gap,
             (50) error_record-text1,        '|' no-gap,
             (53) error_record-text2,        '|' no-gap,
             (50) error_record-text3,        '|' no-gap,
             (50) error_record-text4,        '|' no-gap,
             (67) error_record-text5,        '|' no-gap,
             (45) error_record-text6,        '|' .
endloop.
uline at /1(538).
format color off.
endform.
Report Header for Test Run                                          *
form header.
set left scroll-boundary column 70.
format color 5 .
write: 'REPORT :', sy-repid,
38 'ERROR RECORDS DETAILS OF TEST RUN OF FB60(VENDOR INVIOCE POSTING)'
,123 'DATE :', sy-datum .
format color off.
skip 3.
format color 1 intensified on.
uline at 1(538).
write : /'|',
          (6) 'Row No',                             '|' no-gap,
         (14) 'Company Code',                       '|' no-gap,
         (12) 'Vendor No',                          '|' no-gap,
         (16) 'Reference',                          '|' no-gap,
         (16) 'Invioce Amount',                     '|' no-gap,
         (8) 'Currency',                            '|' no-gap,
         (13) 'Section Code',                       '|' no-gap,
         (20) 'text',                               '|' no-gap,
         (14) 'G/L Account',                        '|' no-gap,
         (15) 'Item Amount',                        '|' no-gap,
         (10) 'Tax Code',                           '|' no-gap,
         (20) 'Business Area',                      '|' no-gap,
         (12) 'Cost Centre',                        '|' no-gap,
         (5) 'Error record Status',                '|' no-gap,
         (50) 'Company Code/Vendor',                '|' no-gap,
         (53) 'Vendor/With holding tax Liability', '|' no-gap,
         (50) 'Company Code/ G/L Account',          '|' no-gap,
         (50) 'Company Code / Cost Centre',         '|' no-gap,
         (67) 'Invioce Status',                     '|' no-gap,
         (45) 'Invalid Balance',
        '|'.
uline at /1(538).
format color off.
endform.
thanks
sitaram.

Performance issue: Calling a BAPI PO create in test mode to get error msgs

Hi,
We have an ALV report in which we display purchase orders that got created in SAP, but either got blocked due to not meeting PO Release strategy tolerances or have failed output messages. we are displaying the failed messages even.
We are looping the internal table of eban(PR) & calling bapi po create in test mode to get failed messages.
Now we are facing performance issue in production. What can be the alternate efficient way to get the error msgs with efficiency
Regards,
Ayub H.
Moderator message: duplicate post (different ID, same company...), see below:
Performance issue calling bapi po create in test mode to get error messages
Edited by: Thomas Zloch on Mar 9, 2012

Hi Suvarna,
so you need to reduce the number of PO-simulations.
- Likely you checked already, that all EBAN-entries should already be converted into POs. If there would be a large number of "new" EBAN-entries, they don't need to be simulated.
- If it's a temporary problem: give aid to correct the problems (maintain prices or whatever the error-reasons are) Then the amount of not-converted purchase requisitions (PR) should drop, too
- If it's likely, that your volume of open PR will stay high: create a Z-Table with key of EBAN and a counter, simulate (once a day) PO conversions and store the results in the Z-table. In your report you can use the results... if they are "new enough". From time to time new simulations should be done, missing master data might be available.
Maybe users should be allowed to start this 2nd report manually (in background), too -> then they can update the messages after some data corrections themself, without waiting for the result (just check later in online report and do something different in between).
And you might need to explain, PO simulation takes as long as PO creation... there is no easy or fast way around this.
Best regards,
Christian

Performance issue calling bapi po create in test mode to get error messages

Hi,
We have a report which displays in alv the purchase orders that got created in SAP, but either got blocked due to not meeting PO Release Strategy tolerances or have failed output messages .We are displaying the failed messages too.
We are looping the internal table of eban(purchase requisition) and calling bapi po create in test mode to get failed messages.
Now we are facing performance issue in production.What can be the other effecient way to get the error messages without effecting performance.
Regards,
Suvarna

Hi Suvarna,
so you need to reduce the number of PO-simulations.
- Likely you checked already, that all EBAN-entries should already be converted into POs. If there would be a large number of "new" EBAN-entries, they don't need to be simulated.
- If it's a temporary problem: give aid to correct the problems (maintain prices or whatever the error-reasons are) Then the amount of not-converted purchase requisitions (PR) should drop, too
- If it's likely, that your volume of open PR will stay high: create a Z-Table with key of EBAN and a counter, simulate (once a day) PO conversions and store the results in the Z-table. In your report you can use the results... if they are "new enough". From time to time new simulations should be done, missing master data might be available.
Maybe users should be allowed to start this 2nd report manually (in background), too -> then they can update the messages after some data corrections themself, without waiting for the result (just check later in online report and do something different in between).
And you might need to explain, PO simulation takes as long as PO creation... there is no easy or fast way around this.
Best regards,
Christian

Running a file in test mode

hi iam doing a bdc recording in which there is an option to runthe file in test mode i.e if that button is checked then only will the validations will be done and the program should stop executingand save the succesful records at the end of it and should not post even if it doesnot contain ny error.and for the validations display a log file containing the no. of records and details.
some of the validations are like komg-hland and country of origin of article komg-herkl has to be checked from T005 TABLE.
The rate unit(currency or percentage)konp-konwa has to be checked from TCURC TABLE.THE CONDITION UNIT KONP-KMEIN HAS TO BE CHECKED FROM T006 TABLE.

Hi Sushant,
Just add a Check box in your program and check it by default.
Perform all the validations expect inserting to the table if the chk param is checked. else insert the value.
parameter : ip_tstrn as checkbox default 'X'.
if ip_tstrn ne 'X'.
perform create_data.
endif.
Guess i hav answerd ur q.Is this you have asked ?
Rgds,
Jothi.P
*let me know the outcome.

Applying support Pack in test mode...

Hi Guys,
I need to know can we apply support pack directly on production in test mode?
If yes, please give me the details of it.
Thanks in advance.
Abu

Hi,
You can use the test scenario to determine if a modification adjustment is required before the Support Package is actually imported, or if any conflicts need to be resolved before the import. The test scenario does not import data into your SAP system.
Also please note that there is no test scenario for SPAM/SAINT updates. A SPAM/SAINT import ignores the scenario you select
Check below link for more details,
http://help.sap.com/erp2005_ehp_04/helpdata/EN/28/9f33088a7e11d2b423006094b9ea64/frameset.htm
Thanks,
Sushil

Nokia 6125 test mode

I have switched off my phone last night and 'test mode' appeared on the display.since then I can't switch the phone back on and the display is just blank.I have tried different sim cards etc. but nothing.Please help.

dclear wrote:
had same problem and found this one this website followed it and update worked .I know its for a different phone but it works the same
Hello Everybody,
Guess What?: "I just completed my firmware update of 6131."
Although I wasn't able to find the exact reason why the phone failed to update before, But if anyone follows the following steps, will surely be able to update phone firmware. The steps are as follows:
1. Remove memory card.
2. Restore default settings.(I recommend to do it by pressing "*#7780#". If asked for security code, enter it.)
If you have both PCSuite and Firmware Updater follow the following procedures. Otherwise directly go to step no.7
========================================================
3.Uninstall Pc suite and restart pc.
4.uninstall Nokia software updater and nokia connectivity cable driver and then restart PC.
5.Install Nokia software updater.
6.Restart PC.
========================================================
7.Connect to PC using your data cable.
8.Select default mode or PC Suite mode.
9.Wait for PC to finish Automatic Installing of new hardware.
10.Connect the charger even if the phone is fully charged.
11.Disable any screen saver in your PC.
12.Start the Updater and follow the instructions.
Whatever happens do not interrupt any activity of the updater.

Nokia 5200 TEST MODE

Why does my nokia 5200 keep displaying 'phone connection lost' on the PC during the software update after switching into 'Test Mode' on the phone?
Message Edited by fxbada on 13-Jan-2008 06:33 PM

dclear wrote:
had same problem and found this one this website followed it and update worked .I know its for a different phone but it works the same
Hello Everybody,
Guess What?: "I just completed my firmware update of 6131."
Although I wasn't able to find the exact reason why the phone failed to update before, But if anyone follows the following steps, will surely be able to update phone firmware. The steps are as follows:
1. Remove memory card.
2. Restore default settings.(I recommend to do it by pressing "*#7780#". If asked for security code, enter it.)
If you have both PCSuite and Firmware Updater follow the following procedures. Otherwise directly go to step no.7
========================================================
3.Uninstall Pc suite and restart pc.
4.uninstall Nokia software updater and nokia connectivity cable driver and then restart PC.
5.Install Nokia software updater.
6.Restart PC.
========================================================
7.Connect to PC using your data cable.
8.Select default mode or PC Suite mode.
9.Wait for PC to finish Automatic Installing of new hardware.
10.Connect the charger even if the phone is fully charged.
11.Disable any screen saver in your PC.
12.Start the Updater and follow the instructions.
Whatever happens do not interrupt any activity of the updater.

Field test mode signal display

Hi all,
Back in March I posted that I was having garbled and dropped calls. I still have them but my cell extender has helped some. I'm still waiting on the femtocell for a final fix in this area...
Anyway a person here suggested that I make the field test call, tap on the bars to change it to the dBm display then quit using a soft reset to leave it in that mode.
Did that and monitored signal in lots of places. I'd like to go back to the bars because in general, even though I understand dBm a picture is easier to quickly digest.
So I did field test mode, tapped to get bars then quit again using soft reset. It seems though to go back to bars then at some point it switches back over to dBm again... A soft reset will take it back to bars but then at some point dBm will appear again...
How do I get back to bar display permanently?

I am sorry but, we do no have the steps to enable the Field Test Mode on your Iphone, which relates to the technical details and signal strength on the mobile phone and network.
To ensure you have the best signal on your phone and in your area, you may benefit from a free update of your wireless phone's roaming software once a month. As Verizon Wireless continues to expand our network, it is important to update your software to receive optimal coverage when traveling.
To update your phone, please follow the simple instructions below while on the Verizon Wireless network and receiving a digital signal:
1. Power on your Verizon Wireless phone.
2. Dial *228 followed by the "Send" key.
3. When prompted, press option "2" to update your roaming capabilities.
Within two minutes, a voice recording will advise you that programming is complete. Remain on the line, as the call will disconnect automatically. I recommend you perform this update monthly or before leaving for a trip, as this will give you the ability to pick up newly acquired service areas while roaming.
If you experience any difficulty with the free software upgrade, please call us at 800-922-0204 from a landline phone, and have your wireless phone charged and available when calling.
KinquanaH_VZW

Field Test Mode disabled cell network

So I was playing around with Field Test Mode today trying different bands and settings with LTE trying to get 4G to work on my Lumia 820 (I'm stuck on Edge - I have i Wireless which uses T-Mobile network I believe). Nothing was working so I tried to set it all back to the way it was before but now I have no cell coverage. Just a circle/slash over the bars. When I reboot I get a message that says the network I selected isn't available and asks me to choose another. When I choose Search Networks, I get a list that includes AT&T, Verizon, "311580", and search again.
Who can help me undo what I did to get i Wireless to show up again?

EBSkater, do you think this is the way AnandTech got their i4 to display the db signal? They didn't detail their "trick".
EBSkater wrote:
MichaelEmpire wrote:
Please tell me how on 3.1.2 ( Factory Unlocked ) to keep DBm not Bar for signnal after exiting Fielt Test Mode . Thank you.
When you're in field test mode, you hold the power key until the "Slide to Power Off" shows up. Now hold the home button until it resprings. You will now ALWAYS have the dB meter, even through updates. The only way to remove it is to restore as a new phone.
If you get an upgraded phone model and restore it with a backup from one of these phones that have the dB meter, you will transfer the dB meter to it.

E70 Update ends in Test mode?

Similar Messages

Maybe you are looking for