E70 - USB cable connection hangs

Hi All, My E70 usb cable connection gets disconnected regularly both on my desktop and laptop computers (USB 2). Very annoying when trying to download something and your connection is gone. Any remedies? Software updater tells me my firmware has no updates (1.0610.05.07 RM10). Thanks for any suggestions to correct problem.

do you move the phone while transferring data ?

Similar Messages

  • My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode

    My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode as well as the DFU? mode and it still will not work. I have the latest version of iTunes on my Mac. My error code was 2002. I also tried it on my laptop (windows 8.1) and none of the above worked. My error code on my laptop was 02. The phone is through Verizon and it has absolutely no damage. It was working fine up until this and I have been trying to fix it for 2 days. Please help! I am unsure of what version the phone was currently running on before this because I have another iphone that's my primary phone and have not used this one in about a month. I do not believe it was updated to IOS 7.

    Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
    Resolve specific iTunes update and restore errors

  • HT201263 My phone is stuck on insert usb cable connect to itunes screen. this happened during my iOS 7 update.

    I was updating my iPhone 4S to the iOS 7 system. During update my phone froze. It's stuck on insert USB cable connect to itunes screen. I've already tried turning my phone off holding Home key while inserting my cord into phone and nothing worked. I've tried DFU mode and that wont work either. What the heck do I do now? So annoyed with this.

    I've also restarted my computer and still nothing.

  • Internet through USB cable connection

    Dear Sir;
    How do I connect my phone to the internet through USB cable connection?
    i would like if i can connect to the internet through the USB cable, not through W-LAN, so if i can, how , which software i need?
    Best Regards

    you ahve to install Nokia PC suite then you will be able to connect to internet via your phone over the USB cable.

  • How to SCAN w. usb cable connected from my deskjet F 4580 series printer

    HOW TO SCAN  [WITH USB CABLE CONNECTED TO MY PC] FROM MY DESKJETF4580 ALL IN ONE PRINTER ?

    If you have the HP full software installed, just press that "Scan" button on the printer.
    ======================================================================================
    * I am an HP employee. *
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
    ***Click on White “Kudos” STAR to say thanks!***

  • I plugged my usb cable connected with my iphone 4 to the computer, and then it shows up as Iphone, but there is no button to sync, and when i manually drag the files into the storage it would say "Device is no longer responding" and it just would not work

    I plugged my usb cable connected with my iphone 4 to the computer, and then it shows up as Iphone, but there is no button to sync, and when i manually drag the files into the storage it would say "Device is no longer responding" and it just would not work... Please help me and quick

    You need to check out the User Guide here: http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • Can n86 charge using usb cable connected to power ...

    I know that nokia n86 is chargeable via usb cable connected to the computer/laptop. However, I don't always have a laptop or computer with me while I'm travelling so I was wondering, is it possible to charge my n86 using a usb cable connected to a power socket using a usb adapter like those used to charge mp3 players if I didn't bring the charger with me? will it spoil the phone?
    Thanks in advance.

    should work fine as long as it is an official USB device. I have a Nokia USB charger and that is rated at 5V/1200mA and I have used a 3rd party USB charger and that has worked also. As I understand it you need something with at least 5V/500mA. I think my 3rd party one was about 600mA

  • Samsung LTE Mobile Hotspot PRO USB cable connection to Mac

    I am trying to connect a Samsung LTE Mobile Hotspot PRO via USB cable to my Macbook and iMac.  I can see it in the System Information, but it does not show up in the Devices in Finder.  Is there a driver that I need?  Does it exist (yet)?

    So I was able to get USB tethering to work, but I still can't connect to the hotspot as a media device (and view what is on my microSD card and/or the device). 
    Here's how I got USB tethering to work: I plugged into my laptop running Linux, where both USB tethering and mounting as a media device work fine, found the Mac OS driver on the device, copied it over to my Macbook, installed, rebooted, wirelessly connected to the hotspot, configured for USB tethering, went to Open Network Preferences..., connected to "SAMSUNG Mobile Device".   I did all this after talking to Samsung on the phone, where they told me the driver does not exist yet....

  • Nokia 6700 USB cable connectivity problem -fixed-

    Ok, got my 6700 today. Everything worked like a charm, until I tried to connect it to my PC using the supplied USB cable. I downloaded and installed the latest Nokia PC suite which supports this phone (7.1.30.9) and connected the phone. Vista was unable to install a driver, and the phone was listed in the device manager as 'unknown usb device'. The phone display reported 'no response from host' after plugging in the usb cable. 
    I searched online for a solution, and tried the following:
    - repaired the install of the Nokia connectivity cable driver: no success.
    - deinstalled the nokia pc suite, ran the pc suite cleaner, rebooted and reinstalled the pc suite: no success.
    - threw away the unknown usb device in the device manager and plugged the cable back in so that Vista would try to install the driver again: no success.
    - tried other USB slots (not behind HUB): no success.
    At this point I was so frustrated that I decided to take out the supplied 1gb micro sd card and transfer some data to it using a card reader. When I looked in the root of the sd card, I noticed that there was an executable called pc-suite.exe there, among some other files. I decided to delete those files to see if they were causing the problems, I deleted the following files:
    - autorun.inf
    - launcher.exe
    - pc-suite.exe
    - qf
    Replaced the micro sd card in the phone, plugged in the usb cable and voila: connection! Everything worked like a charm.
    During my online search I noticed I wasn't the only one experiencing connectivity problems with the 6700. Maybe this fix will help other people as well, that's why I decided to post it here. ;-)
    Peter

    Thanks Peter, nice job - same problem, your solution is working. Shame on Nokia - i have so many problems with E52, and now with 6700 - why ? Is it so difficult to make a reliable software ? So disappointed ... maybe Apple is the solution - but after 10 years with Nokia why change with Apple ?

  • Nokia 5800 - USB cable connection - Frequent "Conn...

    When I connect my Nokia 5800 to PC with USB cable and try to send/recieve any data to/from it, the connection fails after 5-10s. All software form Nokia is affected. The latest PC Suite , Ovi Suite, drivers etc. are installed. With Bluetooth connection everithing is more or less OK but from time to time the phone asks for confirmarion to allow access from PC (despite the connection is already established). Looks like the problem with Connectivity Cable Driver (7.0.2.1) ...

    hi guys, hi nokia
    kind of same problem here. I installed the PC Suite from the web. When I want to save my data (contacts, sms, settings) via Content Copier it stops after the contacts and I get a message "connection lost".
    On the other hand if I use it as a mass storage I can transfer as long as I want.
    SW-Version is: V 11.0.008
    Special-Version:11.0.008.243.02
    I wanted to upgrade the firmware but not before saving everything ... but that's not working.
    Also software like the Communication Center do not update the data. I'm missing calender entrys, contacts cannot be manage, etc. The software tells me connection is established but well not 100%.
    Thanks for the help!
    Message Edited by echelon on 02-Feb-2009 07:27 PM
    Message Edited by echelon on 02-Feb-2009 07:29 PM

  • DKU-2 Usb cable connection

    Hi all,
    Just purchased a DKU-2 usb cable for my Nokia 6230, i installed the pc suite software which came with it and then tried connecting my phone to the pc as the wizard stated, it then froze while attempting to connect the phone to the pc. I then had to restart the program and i then clicked on connect me at the bottom right and it then came up with an error message "there is no available connection type, and therefore connection to the phone cannot be established, the wizard will exit. The phone itself is still recognized as new hardware by the computer.
    Can anyone solve my problem?
    Thanks

    Hi at all,
    I have the same problem of GOWZY after installation. When I press OK on the message "failure to detect available connection type, please reinstall pc suite", another error message appear "Connection to Nokia PC suite not result. Reinstall Nokia PC suite. (code: Init IMediaControl2)". Can we help me about this problem?.
    For information my system configuration is as follow:
    Phone Nokia 6680
    Operating system:
    Microsoft Windows XP
    Creation 2600
    Service Pack 2
    Language: Italian (Standard)
    Language for programs not Unicode: Italian (Standard)
    International formulations: Italian (Standard)
    Input language: Italian (Standard)
    Nokia PC Suite:
    Build 6.81.13.0
    Language: Italian
    Connectivity Cable Drivers:
    Build 6.81.1.2
    Microsoft Outlook:
    Build 11.0
    Creation 8000
    tanks and regards.

  • Nokia 2330 classic - USB Cable connection.

    Hello all, i have nokia 2330 classic and i want to know that can it be connected to PC via usb cable ???

    No.You can't.. There is no connection port on this phone..
    --------------------------------------------------​--------------------------------------------------------​--------------------------------------------------​--If you find this helpful, pl. hit the White Star in Green Box...

  • N97 mini USB cable connectivity issue

    Hello all,
    I've tried to connect my N97 mini with the micro USB cable, and it seems not to work. 
    When I connect the device, It asks me to pick PC Suite, I choose it, but then, when it tries to install the phone on my laptop, it just doesn't work, and it says that the hardware might not work ok.
    I have uninstalled and installed Ovi Suite 2 times, I have resetted the phone and it doesn't work.
    It worked first with Bluetooth, but now that I try again, it just doesn't work anymore.
    Please let me know what I can do.
    Thank you!
    Luisa
    Message Edited by luisalunac on 21-Jan-2010 07:38 PM

    Same issue here. Reset phone, cleaned and reinstalled all software but no success.
    I tried the cable with different nokia models and it works fine, it is definitely a N97 mini issue.
    Waiting for a firmware update to get this really basic function

  • N80 USB Cable connection

    Probably in there somewhere but cannot find it. Can anyone give me an idiots step by step guide to connecting phone to PC by cable. Followed guides but still not showing through PC Suite (nor in My Computer) It is showing via device manager in Wireless communication devices and ports. Have reloaded PCSuite from website to get latest. Have uninstalled and reinstalled cable drivers. Phone does sort of tell me that PCSuite is activated when I connect to PC but does not show via as above. There must be something I am missing. Please help

    Broadly speaking there are two ways you can connect your phone to your PC - this also depends on what you want to do and how quickly you want to do it. The two methods are either by cable or by wireless - I would recommend that you focus on one method (cable recommended) and get that working and sticking with it.
    The reason for this is that if you ever want to be able to run the software updater on your phone - you will never be able to do this wirelessly - this can only be done via cable. In addition to this, data transfer speeds between your phone and PC will be substantially faster using a cable rather than wirelessly.
    I'm pretty sure the N80 comes with a PC USB cable similar to the N70, so the first step would be to ensure that your USB ports on your computer work (for example do other devices work that are plugged into your USB ports ?) - I would also recommend that you do NOT use any USB hubs and plug the phone cable directly into the PC.
    1) Ensure you have PC Suite loaded on your PC and that the icon is next to your clock on your taskbar (the icon looks like a phone)
    2) Plug your phone into your PC using the provided PC USB cable
    3) Wait for a minute - you should see some messages popping up saying a new device has been found and new drivers are being installed for it. You may not see this if it has previously done this already so don't panic if you don't see them
    2) If you look at the bottom right hand corner of your screen next to your clock (unless you have moved your taskbar) you should see an icon which will be in the shape of a phone - right click on it and then left click once on "Manage Connections"
    3) Select (put a tick) next to the option which says "USB (DKU-2, CA-53, DKE-2, CA-70)"
    4) Click the configure button
    5) Follow the steps shown in the wizard
    6) That's it - you're done ! Make yourself a cup of tea - kick back and relax !
    Of course - that's how it's meant to work - however if you have problems, then please let me know at which stage you're having problems and what the messages are and I will do my best to help you sort them out.
    Please be aware however, that I am a member of the public helping you out, and I've just started a new job and am doing some strange hours - so I may not be able to respond as quickly as I usually would to your message.
    Thanks
    Regards,
    Edward

  • 6300 USB Cable connection

    Help ...
    Just got the above phone as was wondering if the phone should be able to charge itself off my pc when it is plugged into the USB port. Installed the data suite software and that works fine. The only thing is that I am not using a nokia usb cable !!!
    Any ideas?
    Thanks

    pls let me know also. i m facing d same prob

Maybe you are looking for

  • Trouble setting up simple SmartAction

    My company has provided everyone with new RAZR M phones. My phone has the 4.1.1 OS. Several co-workers have set up a simple SmartAction to disable mobile data when their phones are connected to a wi-fi network. Here are the steps they took: SMARTACTI

  • Very feeble sound through MBP headphone jack

    I've had my MBP travel with me outdoors for the past few weeks, and I recently discovered that the sound output through the headphone jack is very feeble- even at full volume. This was working all OK a few days back even during my travel. I've checke

  • What is the system status for a transaction ?

    Hi All, I want to know what is the exact meaning (usage) of system status ? We can create a user status in status profile and attach it to transaction type, then why do we use system status ? Regards, Ashish

  • Error 1706 during SBO Mailler Installation of SAP B1

    Hello I use the service SBO Mailer to send customer invoices,  after having issues, the services has to be reinstalled, I ran the setup of SAP Package of version 8.82 PL 11 which allowed me to uninstall the SBO Mailer, but when run again to reinstall

  • What are SERIALLY_REUSABLE and RESTRICT_REFERENCES pragmas, when can used?

    Hi everyone, I have recently joined in Discussion forums and feeling very excited to read blogs. My question is about SERIALLY_REUSABLE and RESTRICT_REFERENCES pragmas. what are these pragmas and when can we use them? It would be greatly appreciated