E71 410.21.010 Problems!

I have been having some problems with my new FW that I would like to share - and if you have some fixes, or the same issues, please let me hear about them.
1. Before, I have been using the nokia internet services support plug ins (2 of them - web services internet support package and nokia internet services support package) version 1.07. I updated from the previous version 1's because i read to do this on nokia's conversation application installation instructions. i noticed that going back to the version 1 is best since it allows me to now be able to send a voice message when i was never able to do this before.
2. my Jbaktaskman is always crashing now with the new FW.
does anyone else have the same expriences or have found a solution to this?
i really wish that there would be one FW that would just make everything else work great. NASA is letting go of some engineers. Nokia, pay whatever you need to to get a flawless FW package out there. Otherwise, i go to apple.
Nokia E65, E71-2 (30) [410.21.010 RM-357]

hhassan30 wrote:
and what is the three finger test please? i have completed everything now, but this sounds like something I need to know.
i have found the problem with JBTM. I set the time settings in ms very low so there was no difference in a short or long press. but, whenever i add an application to the launch menu, it crashes. i have added all i need to add now, so i should not experience any more crashes.
after i installed the new fw, i *#7370#'d it, and then installed my apps. I have noticed before that when i reinstall the settings, that it does in fact make things worse.
please let me know about the 3 finger test. thank you very much for your words.
Read this topic from Radical 24:
/discussions/board/message?board.id=communicators&message.id=43332#M43332
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Similar Messages

  • Nokia E71 problem with New Firmware 410.21.010

    I have updated my Nokia E71 (RM-346) to new firmware 410.21.010. It creating a problem with battery that drain out quickly. Before update, for normal use, I need to charge once a week. But after upgrade new firmware 410.21.010. It finishes in 24 hour for normal use. I have read article that I can not downgrade, just only to wait for next firmware. Have some one any solution?  
    Solved!
    Go to Solution.

    I had a Nokia E71 running very happily on version 3 firmware. I updated the firnware to 410.21.010.
    It worked fine until I switched the phone off and tried to re-start the phone. It stopped working.
    It is my work phone. The messaage on the phone said take it back to my retailer. He tried to get it fixed but because Nokia say it is out of warranty I am out of a phone that is set up to use the Oki system.
    It worked perfectly well until the software update.
    It is now at my retailer waiting for me to collect.
    This is very disappointing.
    Especially as I am now considering not using a Nokia telephone ever again. Moreover, I am sure that Fair Trading would consider this matter very strange and might like ot investigate it further.
    I want my E71 fixed for free by Nokia as it was working without any malfunctions until the firmware update - which was done after receiving notification from Nokia. I have not been able to use the Oki system for some weeks now and would like to contiue using Nokia. Otherwise I guess Nokia lose another customer to iPhone or HTC or Samsung. I await anyone's advice on this matter.

  • E71 GPS and 410.21.010 phone software update

    GPS worked pretty well with the previously installed phone software (200.....).
    I have just got the last available level (410.21.010) installed and GPS connection isn't working anymore, or at last awfully slow connecting to satellites (tens of minutes).

    Same here but thankfully Google Maps is still working fine.

  • E 71 undated to 410-21-010, non of third party sof...

    Hi, Please anyone help, I have installed new undated firmware 410-21-010 for my Nokia E71, and restored all information and setting back to my cellphone, but non of my third party software are working... like Opera mini, google map, fring and others.
    I have tried uninstalling them and again installing but no result, I think the third party software are not compatible with the new firmware, either they need some update or I should roll-back to old firmware.
    Please if anyone can help 

    mushroom_daddy wrote:
    I'd be very interested in hearing (please) users experiences with the latest firmware update for the E71 (v.410.21.010). Is this a worthwhile update, or does it result in more problems than it solves?
    I believe that it adds the latest OviMaps with Voice Navigation, but that can be added by a direct download/installation.
    Are there any other must have components to the v410.21.010 firmware?
    Having experienced a lot of grief the last time I upgraded my fw <E71-firmware-update-messed-up-data-connections>, I am being slightly more cautious this time.
    Feedback welcomed
    Check this:
    http://dailymobile.se/2010/04/09/nokia-e71-e66-and-e63-gets-a-new-firmware-version-v410-21-010/
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • Nokia E66 software version 410.21.010 released????

    Hi,
    I have seen from http://europe.nokia.com/support/download-software/device-software-update/news, saying that E66 firm ware is updated to 410.21.010. But nokia software updater saying new version is 300.21.012.
    Which one is correct. My mobile model is E66 RM-345 (bought in US).
    Somebody help me in this issue..............??
    Solved!
    Go to Solution.

    Firmware updates are device specific. It's your product code that determines when there's an update for your E66.
    http://europe.nokia.com/support/download-software/device-software-update/can-i-update
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • Where is the update for E66 to 410.21.010

    Hi, for severel days I saw the Update for my E66 from 300.21.012 to 410.21.010 on "can I Update". Today I will update, but now the Updater says there where no update. Then I checked on "can I update" again I look very supriesed, It show me a very very old Version 110.07.126. Is the update Database corrupt?
    E66fan

    That database is never really very reliable to begin with for some weird reason. However you could try also checking via FOTA (dial *#0000#) on your phone and select options>check for updates as not all updates are released via NSU. That procedure would cost mobile internet charges though.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • M-Audio Firewire 410 Audio Interface Problem!

    I was just wondering if anyone out there has had the same trouble as I have with my 410 Audio Interface.
    I have a brand spankin' new iMac G5 recieving July 27th, 2005, and a pair of Behringer Truth B2031A Studio Monitors, and then of course my M-Audio 410.
    The problem I am having is that my speakers are picking up noises the G5 is making, how do I explain. It appears as if the speakers were picking up the power consumption changes and amplifying them. Whenever I move my mouse, or use expose or use an application, my speakers just make noises related to the CPU's performance.
    I replaced the speakers, bought new cables, exchanged the M-Audio interface 2 times and am using my 3rd box and the problem still consists.
    Another problem I have is, when I power everything off, the M-Audio Interface still recieves power, therefore blinking it's extremly bright blue LED all night long. (Which isn't supposed to happen).
    If anyone knows any solutions, or had the same problem, Help!!

    Hi Studzik,
    Welcome to the discussions.
    Ummm ---- given that you have a G5, maybe it's better that you post this is the iMac G5 section of the discussions (this is the flat panel iMac G4 section that you have posted in). That way, you have a greater chance of a G5 iMac user familiar with your issue picking it up and being able to help you.
    All the best, hope you find a solution.
    Cheers!
    Karl

  • Nokia E71 time and date problems.

    I cant ever set the time and date of my nokia E71. Anytime i access the time and date settings, it just doesn't go through. Please help me out.

    Hi Faces1, 
    Welcome to Nokia discussions board! 
    In order to fix this issue, I advise you to perform a soft reset on your phone: type *#7780#. Default lock code is 12345. If the issue persists, perform a hard reset. First of all, back up your data using Nokia Suite (Tools > Back up). Once your data is fully backed up,  type *#7370# on the keypad. 
    Alternatively, you may also check for updates on Nokia Suite (by going to Tools > Updates).
    Then try to set the time and date again. 
    Let us know how you get on and feel free to post any other questions you may have. 
    Regards, 
    astra2025
    Press the 'Accept Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

  • Mail on E71 - SMTP and push problems

    I recently upgraded to an E71, largely on the strength that it could do push email, and am experiencing a couple of problems:
    1) I use IMAP folders, and my account requires SMTP authentication - but I don't see how to enable this in the E71 mailbox setup. I presume this is why my outgoing mails get queued, and are never actually sent (unless I connect via a WLAN, when it works OK).
    2) Is it really true that Nokia Messaging can't handle non-Internet mail - i.e., mail on a personally- or corporately-owned domain? If so, the Nokia claim of being able to manage 'business and personal' email comes close to misrepresentation - what credible business uses gmail or Yahoo! mail, for example? If  I'd known this when I signed the contract on the E61 I'd have gone for a BlackBerry instead. Does anyone know of plans to change this in future releases of NM?
    I'd really appreciate any comments/help on this, so thanks in anticipation.

    Hello, mnkeen.
    This post may repeat things you have already tried, but I am replying just in case. In addition, I hope I am reading your message correctly.
    One of my mail providers is Earthlink; however, I do not use TotalAccess.
    • Go to www.earthlink.net
    • Click on Support at the top of the page.
    • Under Top Solutions select "Setting Up Your Email Program."
    • Special Note: You are not going to set up an email program; you are just using the article for research.
    • Scroll down to Setting Up Another Mail Client for EarthLink Access and select Mac OS X Mail 1.4.
    1. Get the server settings if you need them.
    23. through 31. Compare the pictures with your settings.
    29. As you write that you have already set the Server Port to 587, I am wondering if the snag you are experiencing is in the selection of the Authentication option.
    For what it is worth, my home network uses MD 5 Challenge-Response.
    Other things to check:
    • Under Top Solutions you may also want to select "Troubleshooting Email Problems."
    • Maybe the links to "Configuring your email for SMTP Authentication (This is now required for Earthlink email accounts)" and / or "Changing email settings" might be of use to you.
    • Both of those articles include specific information and pictures for Mac OS X Mail.
    Sincerely,
    No Alibi.

  • Nokia E71 Manual Network selection Problems

    HI
    I have the E71 on the Three network and it allows roaming in this country (something thats usually locked off) to avoid roaming charges I went to change the phones network select option from Automatic to manual, I get the usual pop up to select the network I want to connect to but when I go back to the network options screen it shows as automatic and does indeed allow roaming. How do I actually change to manual network selection.
    Cheers

    I can't believe that Nokia have not resolved this problem.
    The problem gives a direct influence on the cost of calls, which is very excessive.
    I spent 3 hours on the phone to Three to try to resolve the problem and nothing worked. Tried removing sim card and putting it back in, factory reset and hard reset.
    For a regular traveler this phone is a nightmare. Call charges can range from £0.25p to £1.50 and 0.12p to 0.25p. Also call charges may be applicable in the UK depending on your network provider.
    Quite simply not fit for its purpose. A mobile phone by definition is "a hand-held mobile radiotelephone for use in an area divided into small sections, each with its own short-range transmitter/receiver provided by a specific network carrier".
    Unfortunately the phone does not meet this definition. Under the Trade Descriptions Act of 1968 should be entitled to a refund as customers have been mislead by the sale of the handset. Also the phone directly misleads roaming customers.
    Also under the Sale of Goods Act of 1979 the mobile phone should be "fit for purpose". Unfortunately the E71 is not fit for purpose as a mobile phone does not meet its definition and as a customer the network provider does not provide a fair service carried by the network. Most networks are contractually bound to do so.
    If you have a problem with this phone please contact Nokia or your provider to try to resolve the problem and push the new firmware as soon as possible!

  • E71 Firmware Reinstall - BIG Problem

    I have been having some 'memory leak' problems with my Nokia e71 recently so took the opportunity just now to attempt to reinstall the firmware via the Nokia Software Updater programme on my PC.
    It got so far (presumably to the point where it had deleted the previous version and was about to start installing the new copy) when the computer flashed up a message saying that the USB connection had been lost and that I should turn off and then on the phone again and then reconnect the USB cable to finish the job.
    Problem is, the phone is in a blank screen state due to being halfway through the reinstall and no amount of pressing any button turns it off, on, into any kind of useable mode and that means at the moment that I am a) without a phone, b) uncontactable and c) hugely annoyed.
    Putting the USB into my other computer (or indeed, restarting the initial one) doesn't do anything because with the phone to all intents and purposes 'off', neither PC detects any hardware being connected.
    Any ideas gratefully receieved!
    Thanks

    DPG31 wrote:
    Does anyone know where/how I can download a version of mail for exchange that is not the latest one (as provided by nokia store) but the previous one which does not include all the subfolders of your inbox (2.9 I think)
    Think that seen copies of MfE v2.9.158 circulating but can't post links to Nokia software not held upon Nokia servers unfortunately.
    Happy to have helped forum with a Support Ratio = 42.5

  • E71 native browser "History: problem

    Hi Guys!
    I hope you could help me as I am frustrated already beyond imagination.
    everytime i finish using the native browser surfing the net on my E71, i usually clear all (cache, hsitory, form&password etc..). However, just 2 days ago, I don't know for what reason, but everytime i clear everything, there are two sites that remain. Even after clearing history several times, reset factory settings, turned off and on my phone, still those two sites are there. After this problem, I already have problems connecting to youtube, facebook and google. My browser doesn't load them, but other sites like yahoo, hotmail load without a problem. I don't know what to do already. I need those two deleted from my history. Please help ((((( *sob* *sob* *sob*
    Thanks guys!

    Did you check your bookmarks?
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • M-audio firewire 410 audio track problem....

    Hi there, I am a newbie to Logic Express 7. Step up from Garageband they said - it's easy they said... yeah right!
    My problem is this - I bought a firewire 410 to use with LE7. Firewire 410 has 4 inputs. LE7 will only let me create 4 audio tracks. If I try to create more, it just "mirrors" an existing audio track, making it unusable. In garageband, using just 1 input (line in) I could layer up as many audio tracks as I liked. Now, after spending all this money (the quality is better, but) I have what amounts to a 4-track recorder! I am probably just being dumb, I mean that can't be true, can it? Anyone else had this problem?
    thanks in advance for putting me out of my misery...

    I found the answer! Create multiple.. in the track sub-menu. This creates new audio objects as well as tracks. Problem solved.

  • E71 Mail for Exchange problem

    I've set up a few of these adn had no problems but yesterday I set up 3 off E71-b exactly the same as always and all now have the same problem:  when powering on you get the message "allow to send and receive......" answering "yes" then gives "testing network" and then then the Email setup wizard starts again. If you then cancel the Wizard the phone synchs properly with Head Office's Exchange Server.   It means the users have to exit teh wizard at evry start-up.    Any help would be much appreciated.

    Guys -- I had the same problem but I think I figured it out. Menu>MfE>Mail for Exchange>Content synced> Synchronize Calendar (choose yes, ditto Contacts and Tasks)>then follow the stupid menu logic that doesn’t actually save any changes unless you save each individual change or something and finally choose “in case of conflict server always wins”> and double check to make sure it is always looking for changes. I tested it with new calendar and contact entries on my corp. mail account and they showed up almost immediately on the e71.
     Cripes. Good luck.
    Tom

  • M-Audio 410 Firewire - Mic problems

    I have Windows i7 64bit, and a M-Audio 410 Firewire soundcard.
    I can't get the mic to work in Skype, byt it works fine when I record with it in others audioprograms (Soundboth and Audition).
    I can hear when people talk to me through Skype, but they can't hear me talking.
    I have try to change set-up for mic in Skype funktions, but I can't make it work
    Any idea of what I can do - I use a RØDE NTG-2 and Phantompower is on
    When I speak in the mic I can hear it in my Headspeakers

    I have the same problem, but on Mac and with a Yamaha n12 mixer or a Behringer usb - up until now I didn't find a way to solve this. I'm afraid it's a skype problem, our mixers have nothing to do with it...

Maybe you are looking for

  • How can I save apple-formatted tunes & then switch to microsoft-based softw

    I received an IPod (30 GB) with 6,000 tunes formatted for apple, but I use windows. I have to reformat, but if I, I realize I will lose the existing library of songs that I want to keep. Is there any way I can do this without losing the current downl

  • BDC or LSMW for open PO

    Dear Friends, We are suppose to go likve soon, but we have @ 500 open Purchase orders and we would like to ipload same in sap as retail can any 1 guide me how to do it? Regrads, Vishal [email protected]

  • Error while creating template

    hello,  We have SCVMM 2012 R2 environment and  Hyper-v host  are added. I created a VM  on host machine and then its clone but jobs gets failed with following below error and this error am getting very frequently on scvmm server/ Error (2912) An inte

  • How do I stop auto launch of apps at start

    Even when unchecking the box at shutdonw to not repoen apps at start up, the system continues to reopen apps at the next start up.

  • Another WMI Scan Failure Thread... Please help!

    Hi guys,I seem to have pretty inconsistent Spiceworks scan success when adding new machines to our domain. I'm dealing with a Surface Pro 3 running Windows 8.1 currently, and I can't for the life of me seem to get SW to scan it.I've been digging thro