E71 also steals characters when writing characters...

Whenever I write a text message and use one of those character á,ã,í,ó,õ,ú or č,ć,š,đ,ž (Serbian Latin) for the first time in a message it takes 91 characters. And when you use it for the second, third... time it takes 1 ch. WHY?
That is also a problem on all other nokia symbian phone (my experience with 3650, n70, n73). I don't have this problem on NONsymbian nokia phones and all other non nokia phones.

Is that phenomenon similar to this: "normal" English characters take up 1 character. But mix Chinese characters the count jumps by around 50% more.
I've learnt to not mix English and Chinese messages whenever possible.
Never got around to finding out why though
E71! Lovin' It!

Similar Messages

  • How do you set the left hand margin when writing emails. Some characters disappear off of the left side of the page because the margin is so close to the edge

    When writing emails the left hand margin is so close to the edge of the page that some characters disappear from view on the left hand of the page. How can I set the left hand margin to not be so close to the left edge of the page?

    Oy. You beat your head for hours and finally concede to asking for help, only to solve it two minutes later. Here's the answer.
    In the inspector, on the Layout tab, there's a checkbox that reads, "Show Thumbnail Track".
    UNCHECK that box and the gutter goes away.

  • Open Hub DTP issue (Error 21 when writing to the local workstation)

    Hi,
    I am using an openhub destination to output my csv file. Its a local workstation share folder. Data Provider got around 50000 rows (expecting a 40MB file). When ever I execute the DTP, it run for first data package and fell down with below error message.
    Error 21 when writing to the local workstation
    Error while updating to target XXXXXXX (type Open Hub Destination)
    Operation  could not be carried out for
    Exception CX_RS_FAILED logged
    Exception CX_RS_FAILED logged
    Sometimes the file get created with partial entries, most of the times the file wont even get created. I created new dtps and tried the same. Changed the package size, servers, parallel processes etc, but of no use.
    Thanks Neo

    Hi Neo,
    Did you try to define the logical/physcal file path from tcode FILE? If not can you try to use this option and see if it works.
    Also can you change your DTP settings by reducing the data packet size to see if your facing this error message?
    Thanks
    Abhishek Shanbhogue

  • Errors when writing metadata to files on Windows Server

    Good day!
    I have an iMac running OSX 10.9 (Maverick) and Lightroom 5.2.
    My catalog is on the local iMac drive, and the images are on SMB shared drive (handled by Windows 2012 server).
    I decided to do the final layout of my album using InDesign, and for that I needed to access to images using Bridge. So selected all the images (the rated once...) and issue a Metadata/Save command.
    The system came back with errors on many of the files (such as Photos are read only, and unknown errors).
    Retrying to save the metadata on image that was flagged with an error usually (but not always) worked.
    I tried to select save the metadata for few (6) images in a time, many times it was ok, but sometimes, one or two of them failed (and retrying again usually solved the problem).
    It looks to me like a timing related issue.
    Any ideas?
    (After spending about an hour on this, I have exported the images to my local drive...). In general I don't have similar problems with other apps.
    Any ideas?
    Yuval

    I Yuval
    I'm experiencing more or less the same behavior (see Read-only error when writing metadata to file over network (Synology DS1315+ using AFP) ). For me however, the problem is more pronounced if I use the AFP protocol and is better (I think as you described) if I use SMB (all done on a Synology DS1315+). With SMB it most often works but in very rare cases I also get the "read only" message!
    Do you have solution to this? Or are you stuck as I am?
    Cheers, Chris

  • Error when Writing Metadata to Files in Bridge (Mac) but not in Bridge (PC)

    We get an error when writing metadata to files in Bridge (Mac) but not in Bridge (PC). In the same drive and folder, the PC can successfully write a keyword to a file on the PC, where the Mac returns an error. I have researched this at the Adobe Knowledgebase, but their answer seemed to indicate it was a global issue, and we don't see that behavior on the PC.
    The client is a Mac of course, and the server volume is a Windows share volume. The Mac is bound to AD, and the domain\username and username formats have both been tried when logging in, but you receive the error in both.
    Any help would be appreciated.
    Thanks!
    Rich Oliver

    Hi, I'm having the same problem using FreeNAS (which uses Samba and Netatalk in the backend), but I tried with both AFP and SMB on Mavericks and Yosemite, I still have the same issue.  I think it might be a timing issue with how lightroom interact with a slower write delay using network shares.  I suggest you also chime into this thread:  Lightroom 5 can't write metadata to DNG files   I really hope this is resolved as this is impacting my productivity as I moved my workflow to my Macbook with a shared NAS.

  • Books / links on best practices when writing on-line Help

    Hi everyone
    Not sure were to place this topic...
    I have not posted in here for ages...
    I am a RoboHelp user and I am looking for one or several
    books about best practices when writing on-line help. For examples,
    what are the "rules" or "do's" and "don'ts" for CSS, topic linking,
    number of clicks, links within a topic, index building, etc.
    Just wondering if some people on this forum know about some
    good books where all of the rules or do's would be compiled?
    Thanks in advance for any input.
    Regards

    KeepItSimple,Stupid!
    That is, just because there are neat things like drop-down
    text, marquees, and such, doesn't mean you should use them.
    Stick to the basic HTML fonts and colors (use the
    w3schools web site for all
    things HTML and CSS.
    Instead of styles, create your lists by selecting Normal
    paragraphs and formatting with the Bullet and Number toolbar
    buttons.
    Keep your tables as simple as possible (try not to nest them
    and have all sorts of row and column spans, and try to avoid lists
    and figures, if you can). Also, break up very long tables into
    functional groupings with introductory headings.
    Use
    Peter Grainge's web
    site and
    Rick
    Stone's web site for all the best workarounds and diagnostics.
    Good luck,
    Leon

  • Does iMessages only work when writing to people who have i05, or can you write to people using other systems ?

    I have an iPad 2, but have never yet been able to send a iMessage....does this only work when writing to people who also have i05, or can you also write to people who use other systems ?
    iMessages is turned on on my system, but even when writing to people who I know have iPads or iPhones , I just get the red exclamation mark....
    Sending messages on my iPhone seems to work okay when sending to non iPhone users, so I don't understand what's wrong here .

    From http://support.apple.com/kb/HT3529 :
    iMessage allows you to send unlimited text, photos, videos, locations, and contacts using Wi-Fi or 3G* from your iPhone, iPad, or iPod touch to other iOS 5 users.
    Note: On iPhone, if iMessage is unavailable, the message may be sent as SMS or MMS, depending on content. Carrier messaging rates may apply. You can turn this on or off in iPhone at Settings > Messages > Send As SMS. Messages sent using iMessage will appear in a light blue bubble, while messages sent using SMS or MMS will appear in a green bubble.

  • Ü Character being replaced ? when writing the data to CSV from DB in Linux

    Hi All,
    Can anyone help me in understanding the exact cause of my issue
    Issue Description: Ü Character being replaced ? or when writing the data to CSV from DB in Linux.
    Shell used: ksh
    Actual string: MÜNCHENER RÜCKVERSICHERUNGS-GESELLSCHAFT AG
    Output String: M?NCHENER R?CKVERSICHERUNGS-GESELLSCHAFT AG
    locale ouput:
    LANG=en_US.UTF-8
    LC_CTYPE="en_US.UTF-8"
    LC_NUMERIC="en_US.UTF-8"
    LC_TIME="en_US.UTF-8"
    LC_COLLATE="en_US.UTF-8"
    LC_MONETARY="en_US.UTF-8"
    LC_MESSAGES="en_US.UTF-8"
    LC_PAPER="en_US.UTF-8"
    LC_NAME="en_US.UTF-8"
    LC_ADDRESS="en_US.UTF-8"
    LC_TELEPHONE="en_US.UTF-8"
    LC_MEASUREMENT="en_US.UTF-8"
    LC_IDENTIFICATION="en_US.UTF-8"
    LC_ALL=
    Environment variable set: NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1
    Linux Version: 2.6.18-128.el5 128 bit
    java Version: 1.6
    Oracle DB version: Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
    When i query directly from DB i get the data in right format but when i write the same data to a csv file then the above problem occurs.
    Can anyone please suggest me what could be the cause for this issue?
    Regards,
    Shiva

    Hi Srini,
    We are using Java based ETL specifically written for our application. we are using sqlplus to make DB connections. am using vi editor to see the data. After the Extraction process the data processed in also in the wrong format.
    Regards,
    Shiva

  • Internal error occurred when writing

    Hi,
            We have a brand new sandbox setup and I am trying to create a planning Object Structure. I added the objects and checked for errors, I got no errors. But when I try to activate the POS, I am getting the following error:
    Internal error occurred when writing
    Message no. D0054
    Can somebody help me identify what the problem is?
    Thanks.

    Hello Raj -
    Look at the following note
    647603 if you are using SCM 4.0.
    Apply the corrections this might help.
    Also if you are using SCM 5.0 try to go thru the post installation steps and you will come across activation of infoobjects that are relevant and are needed for POS.
    Perform the steps as described and the message shud go away.
    Hope this helps.
    Regards,
    Suresh Garg

  • Portege M400 screen deforms at center when writing

    Hi
    When writing on or near the center of the screen the image at the center of the screen deforms somewhat, like when touching a normal lcd screen and the screen colours change. It does not take much pressure to do this. Is this typical behaviour for a tablet pc although I would expect this not to be the case?
    Thanks
    Rivaaj

    Hello
    It is not typical and there must be some explanation. On this way it is not easy to say why this happen but I presume that there is some mechanical problem and can not be because of software. I am also sure that just investigation by technician can give you answer why this happen.
    Please contact them and explain the situation. The addresses you can find under http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true
    Bye

  • Adobe Media Encoder (Error compiling movie) Unknown error when writing to Isilon OneFS 6.5.5.18

    Adobe Media Encoder (Error compiling movie) Unknown error when writing to Isilon OneFS 6.5.5.18 while using Adobe Premiere Pro.
    Process:         Adobe Premiere Pro CC 2014
    Path: /Applications/Adobe Premiere Pro CC 2014/Adobe Premiere Pro CC 2014.app/Contents/MacOS/Adobe Premiere Pro CC 2014
    Identifier: com.adobe.AdobePremierePro
    Version:         8.1.0 (8.1.0)
    Code Type: X86-64 (Native)
    Parent Process: launchd [2538]
    Responsible:     Adobe Premiere Pro CC 2014
    Date/Time: 2015-01-06 14:04:23.500 -0700
    OS Version:      Mac OS X 10.9.2 (13C64)
    Report Version:  11
    Crashed Thread: 55  Dispatch queue: com.apple.root.default-priority
    Exception Type: EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000000
    Customer created test export with 777 permissions and set mount parameters to the following:
    mount_nfs -o vers=3,tcp,rdirplus,intr,nolocks,async,rsize=32768,wsize=32768
      -- Original mount options:
         General mount flags: 0x40 async
         NFS parameters: vers=3,tcp,nolocks,rsize=32768,wsize=32768,rdirplus
      -- Current mount parameters:
         General mount flags: 0x4000058 async,nodev,nosuid multilabel
         NFS parameters: vers=3,tcp,port=2049,nomntudp,hard,nointr,noresvport,negnamecache,callumnt,nolocks,quota, rsize=32768,wsize=32768,readahead=16,dsize=32768,rdirplus,nodumbtimr,timeo=10,maxgroups=16 ,acregmin=5,acregmax=60,acdirmin=5,acdirmax=60,nomutejukebox,nonfc,sec=sys
    The pcap shows once the movie is created a lockup call is responded from Isilon with Error: NFS3ERR_NOENT
    478         V3 CREATE Call (Reply In 479), DH: 0xea5f731c/QBRSN-0-0-1.mov Mode: UNCHECKED
    479         V3 CREATE Reply (Call In 478)
    484         V3 LOOKUP Call (Reply In 485), DH: 0xea5f731c/._QBRSN-0-0-1.mov
    485        V3 LOOKUP Reply (Call In 484) Error: NFS3ERR_NOENT
    V3 LOOKUP Reply (Call In ....) Error: NFS3ERR_NOENT  -   This is by design of OneFS, we coalesce files and then flush them out to disk which is why the commit time is accurate but the file is not immediately available. however when an async option is used within the mount options this should be avoided if writing asynchronously to the cluster.  Has anyone else seen this behavior lately? (current workaround is to store locally and transfer to the cluster via Finder)

    That error can happen for many reasons...one of the reasons that I occassionaly get it is because I try exporting a movie to an external drive that has been formated in the old FAT32 instead of the NTSF standard.  FAT32 only allows for file sizes up to 2 gigs.  And as soon as it reaches that...I would get that error.  I don't know if that is why you are getting that error...but it would be easy to check.  1) are you generating a file that is over 2 gigs?  2) is your drive that you are exporting to FAT 32 (just right click the drive in My Computer and select "properties" then just look for what it says next to "file system".

  • Internal error occured when writing

    Hi all
    I successfully imported an APO planning area into the quality systems, however the same request ends with error 12 in the production system. Landscape is SCM 5.0 sp8 with BI 7.0 sp12. When i checked the import job RDDEXECL (user DDIC), it shows:
    Date Time Message text Message class Message no. Message type
    07/08/2007 00:02:57 Job started 00 516 S
    07/08/2007 00:02:57 Step 001 started (program RDDEXECL, variant , user ID DDIC) 00 550 S
    07/08/2007 00:02:57 All DB buffers of application server <server_name> were synchronized PU 170 S
    07/08/2007 00:03:17 <b>Internal error occurred when writing</b> D0 054 E
    07/08/2007 00:03:17 Job cancelled after system exception ERROR_MESSAGE 00 564 A
    I thought there will be an ABAP dump, I found this internal error (in bold in the log above). I tried searching for info on this but no help, it does not says error writing to what? Please help.
    Thanks
    Ali

    It seems a syncronization problem..
    You can create a customer message providing the following information:
    1. The symptoms that occurred
    2. The highest Support Package
    3. The current SAP_BASIS Support Package level
    4. The queue that is currently selected
    Header Data

  • How do you get your iPhone to stop connecting to face time while on a voice call? And it also does this when I'm on the phone with someone who doesn't have an iPhone. I look down at my phone while on a call and it says connecting to face time

    How do you get your iPhone to stop connecting to face time while on a voice call? And it also does this when I'm on the phone with someone who doesn't have an iPhone. I look down at my phone while on a call and it says connecting to face time

    How are you dialing these calls?

  • HT4993 How do you get your iPhone to stop connecting to face time while on a voice call? And it also does this when I'm on the phone with someone who doesn't have an iPhone. I look down at my phone while on a call and it says connecting to face time

    How do you get your iPhone to stop connecting to face time while on a voice call? And it also does this when I'm on the phone with someone who doesn't have an iPhone. I look down at my phone while on a call and it says connecting to face time

    How are you dialing these calls?

  • Application Crashes when writing to TDMS

    My application written with LabVIEW 2009 (9.0.1) crashes occasionally when writing to a tdms file.  The application logs data to a tdms file at low sample rates (~1/min).  Attached is the error information. 
    Could my error be related to this thread.
    Storage VI error thread
    Mark Yeager
    Attachments:
    17c6_appcompat.txt ‏7 KB
    App Crash Error.png ‏45 KB
    creep_log_11-17.pdf ‏18 KB

    Brandon,
    I attached better pictures.
    This crash seems to occur randomly.  However, It usually occurs after a day or two.  I can't send the exact code, but can send the a simplified version of the code.
    Thanks,
    Mark
    Mark Yeager
    Attachments:
    App Crash (Bigger).png ‏16 KB
    App Crash Error (Bigger).png ‏20 KB

Maybe you are looking for

  • HT204053 i want to change an existing icloud account to a new icloud account?

    I want to change an existing icloud account to a new icloud account

  • No Such Provider Exception SunJSSE

    Hello, We are facing problem using SunJSSE with WebSphere4.0. We placed jsse jars in the jre/lib/ext directory and in our code we are trying to create SSLcontext as below context = SSLContext.getInstance("SSL","SunJSSE"); tmFact=TrustManagerFactory.g

  • Reg: Multiple Ranges for Variables

    Hello Gurus, We have a requirement to have Multiple Ranges for Variables and I have gone through the document below which is applicable to 2004s SP 07. We are on CE 7.1 SP 3 I was looking for a similar document which can guide me to create Multiple V

  • Java Library Management

    My organisation is just getting into Java development. We are keen to maximise the re-use benefits of Java and there is potential for a wide range of common components across projects. We will have 3 main environments: development, acceptance and pro

  • Generate URL with oas,oapc and ti

    Hi all, I am trying to generate a url with oas oapc and ti and pass to javascript for navigating back to that page. When I don't give these parameters I Get the error as You are trying to access a page that is no longer active.- The referring page ma